Dear Tom Rini,
On 04/09/2014 05:37 PM, Tom Rini wrote:
> On Wed, Apr 09, 2014 at 05:22:57PM +0200, Andreas Bießmann wrote:
>> (gdb) s
>> 118 __raw_writel(l, reg);
>> (gdb) print/s l
>> $17 = 2048
>> (gdb) print/x l
>> $18 = 0x800
>> (gdb) print/x reg
>> $19 = 0x49050090
>> (gdb) s
>> ^C
Hi,
When doing make for coreboot-x86, in arch/x86/lib/Makefile it
re-generates libgcc.a from the original toolchain libgcc.a and did
some patching for certain libgcc functions. And this seems having some
issues when you try to do incremental compilation.
Steps to reproduce the issue:
1. Setup tool
On 04/10/2014 09:22 AM, Andreas Bießmann wrote:
> On 04/09/2014 05:37 PM, Tom Rini wrote:
>> On Wed, Apr 09, 2014 at 05:22:57PM +0200, Andreas Bießmann wrote:
>
>>> (gdb) s
>>> 118 __raw_writel(l, reg);
>>> (gdb) print/s l
>>> $17 = 2048
>>> (gdb) print/x l
>>> $18 = 0x800
>>> (gdb) print
> Dear Friends,
>
> I'm bringing up a custom i.MX28 based board. I'm having trouble bringing up
> the u-boot (version v2013.04) loader. The > > Powersupply has been design as
> detailed in section 4.1.2.1 (VDD5V source only) of application note AN4199:
>
> http://www.freescale.com/files/32bit/d
Hi Hua,
As far as I tested, the problem you mentioned
did not happen.
On Thu, 10 Apr 2014 14:59:33 +0800
Hua Yanghao wrote:
> Hi,
> When doing make for coreboot-x86, in arch/x86/lib/Makefile it
> re-generates libgcc.a from the original toolchain libgcc.a and did
> some patching for certain lib
This kind of option is clearly not what other u-boot commands use, I
could not find a single command
that supports '-' style options. If this had been widely used, I
wouldn't have asked in the first place.
It seems you did not look very carefully. Just for example:
=> help env
env - environme
On Wednesday, April 09, 2014 at 11:03:02 PM, Adrian Cox wrote:
> Add endian support macros to interrupt transfers in the EHCI driver, to
> allow operation on PowerPC.
>
> Signed-off-by: Adrian Cox
Other than style issues, which need to be fixes (you can check for them with
./scripts/checkpatch.
On Sunday, April 06, 2014 at 01:17:46 PM, Wolfgang Denk wrote:
[...]
> @@ -131,7 +133,9 @@ void usb_kbd_generic_poll(void)
> /* Submit a interrupt transfer request */
> maxp = usb_maxpacket(usb_kbd_dev, pipe);
> usb_submit_int_msg(usb_kbd_dev, pipe, data->new,
> -
On Thursday, April 10, 2014 at 07:08:06 AM, Heiko Schocher wrote:
> add a possibility to add a medium specific polltimeout
> function. So it is possible to define different
> poll timeouts.
>
> Used on nand medium, for setting the DFU_MANIFEST_POLL_TIMEOUT
> only on nand ubi partitions, which is c
On Thursday, April 10, 2014 at 07:08:05 AM, Heiko Schocher wrote:
> comment in ep0_txstate() states:
>
> "report completions as soon as the fifo's loaded; there's no win
> in waiting till this last packet gets acked".
>
> This is wrong for using dfu. In the dfu usecase we must send
> a PollTimeo
Hi Marek,
On Apr 10, 2014, at 10:54 AM, Marek Vasut wrote:
> On Thursday, April 10, 2014 at 07:08:06 AM, Heiko Schocher wrote:
>> add a possibility to add a medium specific polltimeout
>> function. So it is possible to define different
>> poll timeouts.
>>
>> Used on nand medium, for setting the
Hi Masahiro,
> Strange.
> "make coreboot-x86" is not supported anymore.
>
> Now, we must do "make coreboot-x86_config all" instead.
We are still using U-boot 2014.01, which seems to be the latest stable
release, isn't it?
>
>> 3. make # second make fails with message:
>> make[1]: Entering direct
> From: "Marek Vasut"
> Also, this USB_KBD_PDATA_SIZE should instead be called
> "USB_KBD_LS_REPORT_SIZE"
> [...]
> What worries me a bit is that 64-byte high-speed report, but I never
> saw a
> device that would generate those. This section 5.6 is also the only
> place that
> mentions the high-s
On Thursday, April 10, 2014 at 10:49:56 AM, Adrian Cox wrote:
> > From: "Marek Vasut"
> >
> > Also, this USB_KBD_PDATA_SIZE should instead be called
> > "USB_KBD_LS_REPORT_SIZE"
> > [...]
> > What worries me a bit is that 64-byte high-speed report, but I never
> > saw a
> > device that would gene
There is no dependency of omap_elm.c on omap_gpmc.h
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_elm.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
index 47b1f1b..4c65f3b 100644
--- a/drivers/mtd/nand/omap_elm.c
+++ b/driver
This patch series
- removes un-wanted & redundant code in omap_elm and omap_gpmc drivers
- refactors some private struct in omap_gpmc to make them generic across
ecc-schemes
- minor code fixes and clean-ups
This series can be as-it-is applied on u-boot 'v2014.04-rc3'.
*Testing Procedure*
Boot
ELM hardware engine support ECC error detection for multiple ECC strengths like
+--++
|Type | ECC syndrome length|
+--++
|BCH4 | 6.5 bytes = 13 nibbles |
|BCH8 | 13 byte = 26 nibbles |
|BCH16 | 26 bytes = 52 nibbles |
+--+
This patch prepares to refactor 'struct nand_bch_priv' -> 'struct
omap_nand_info'
And thus performs following clean-ups:
- remove nand_bch_priv.type: use nand_bch_priv.ecc_scheme instead
- remove nand_bch_priv.mode:
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_gpmc.c | 23 ++-
This patch tries to avoid some local pointer dereferences, by using common
local variables in omap_correct_data_bch()
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_gpmc.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/omap_gpmc.c b/driver
This patch renames 'struct nand_bch_priv' which currently holds private data
only
for BCH ECC schemes, into 'struct omap_nand_info' so that same can be used for
all ECC schemes
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_gpmc.c | 58
1 file
This patch adds macros for following parameters of ELM Hardware engine
- ELM_MAX_CHANNELS: ELM can process 8 data streams simultaneously
- ELM_MAX_ERRORS: ELM can detect upto 16 ECC error when using BCH16 scheme
Signed-off-by: Pekon Gupta
---
include/linux/mtd/omap_elm.h | 9 ++---
1 file
From: Yegor Yefremov
Signed-off-by: Yegor Yefremov
---
arch/arm/include/asm/arch-am33xx/clock.h |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h
b/arch/arm/include/asm/arch-am33xx/clock.h
index 7637457..f00fad3 100644
--- a/arch
Hi Pantelis,
> Hi Marek,
>
> On Apr 10, 2014, at 10:54 AM, Marek Vasut wrote:
>
> > On Thursday, April 10, 2014 at 07:08:06 AM, Heiko Schocher wrote:
> >> add a possibility to add a medium specific polltimeout
> >> function. So it is possible to define different
> >> poll timeouts.
> >>
> >> Us
I've found following source code implementing SSC in kernel on TI's
forum (http://e2e.ti.com/support/arm/sitara_arm/f/791/t/198104.aspx
source file:
http://e2e.ti.com/cfs-file.ashx/__key/telligent-evolution-components-attachments/00-791-01-00-01-12-33-83/AM335x_5F00_Spread_5F00_Spectrum.c).
Now I'
Dear Marek,
In message <201404101012.42527.ma...@denx.de> you wrote:
> On Sunday, April 06, 2014 at 01:17:46 PM, Wolfgang Denk wrote:
> [...]
>
> > @@ -131,7 +133,9 @@ void usb_kbd_generic_poll(void)
> > /* Submit a interrupt transfer request */
> > maxp = usb_maxpacket(usb_kbd_dev, pipe);
Hello Lukasz,
Am 10.04.2014 12:08, schrieb Lukasz Majewski:
Hi Pantelis,
Hi Marek,
On Apr 10, 2014, at 10:54 AM, Marek Vasut wrote:
On Thursday, April 10, 2014 at 07:08:06 AM, Heiko Schocher wrote:
add a possibility to add a medium specific polltimeout
function. So it is possible to define
From: Andreas Bießmann
Commit 890880583d84607e36b52a785a96b167728bbf73 introduced EEPROM parsing and
board detection but faild to return a valid tricorder_eeprom struct for backup
case. When pressing S200 while reading EEPROM we ignore the value. We
returned falsely a tricorder_eeprom struct wit
From: Andreas Bießmann
Signed-off-by: Andreas Bießmann
Cc: Thomas Weber
Signed-off-by: Andreas Bießmann
---
include/configs/tricorder.h |3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 62f97d2..a609861 100644
--- a/incl
These fixups are required for tricorder board to run with 2014.04.
One big change is a different ecc layout which came in by Pekon Gupta's
changes to the omap_gpmc driver. Another point was changed behaviour of
omap_gpio driver, we need to switch the clocks now explicitely.
Thomas, could you ple
From: Andreas Bießmann
Commit d016dc42cedbf6102e100fa9ecb58462edfb14f8 changed the layout of BCH8 SW
on omap3 boards. We need to adopt the ecc layout for the nand_spl_simle
driver to avoid wrong ecc errors.
Signed-off-by: Andreas Bießmann
Cc: Thomas Weber
Signed-off-by: Andreas Bießmann
---
On 10.04.2014 11:35, Pekon Gupta wrote:
There is no dependency of omap_elm.c on omap_gpmc.h
Signed-off-by: Pekon Gupta
Reviewed-by: Stefan Roese
Thanks,
Stefan
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-b
On 10.04.2014 11:35, Pekon Gupta wrote:
ELM hardware engine support ECC error detection for multiple ECC strengths like
+--++
|Type | ECC syndrome length|
+--++
|BCH4 | 6.5 bytes = 13 nibbles |
|BCH8 | 13 byte = 26 nibbles
On 10.04.2014 11:35, Pekon Gupta wrote:
This patch adds macros for following parameters of ELM Hardware engine
- ELM_MAX_CHANNELS: ELM can process 8 data streams simultaneously
- ELM_MAX_ERRORS: ELM can detect upto 16 ECC error when using BCH16 scheme
Signed-off-by: Pekon Gupta
Reviewed-b
On 10.04.2014 11:35, Pekon Gupta wrote:
This patch prepares to refactor 'struct nand_bch_priv' -> 'struct
omap_nand_info'
And thus performs following clean-ups:
- remove nand_bch_priv.type: use nand_bch_priv.ecc_scheme instead
- remove nand_bch_priv.mode:
Signed-off-by: Pekon Gupta
Revi
On 10.04.2014 11:35, Pekon Gupta wrote:
This patch renames 'struct nand_bch_priv' which currently holds private data
only
for BCH ECC schemes, into 'struct omap_nand_info' so that same can be used for
all ECC schemes
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_gpmc.c | 58 ++
Hi Stefan,
>From: Stefan Roese [mailto:s...@denx.de]
>>On 10.04.2014 11:35, Pekon Gupta wrote:
>> ELM hardware engine support ECC error detection for multiple ECC strengths
>> like
>> +--++
>> |Type | ECC syndrome length|
>> +--++
On 10.04.2014 11:35, Pekon Gupta wrote:
This patch tries to avoid some local pointer dereferences, by using common
local variables in omap_correct_data_bch()
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_gpmc.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff -
On Thursday, April 10, 2014 at 12:08:44 PM, Lukasz Majewski wrote:
[...]
> Seems reasonable for me: +1
>
> Some comment:
>
> Guys, please be consistent with CCing people. I didn't receive this
> thread. Also this original reply from Pantelis was not CCed to Heiko.
For mutt, I have the key 'a'
On Thursday, April 10, 2014 at 12:15:30 PM, Wolfgang Denk wrote:
> Dear Marek,
>
> In message <201404101012.42527.ma...@denx.de> you wrote:
> > On Sunday, April 06, 2014 at 01:17:46 PM, Wolfgang Denk wrote:
> > [...]
> >
> > > @@ -131,7 +133,9 @@ void usb_kbd_generic_poll(void)
> > >
> > > /*
Update the EHCI driver to support interrupt transfers on PowerPC.
Signed-off-by: Adrian Cox
---
Changes in v2:
- Whitespace and line length fixes for checkstyle
drivers/usb/host/ehci-hcd.c | 56 ---
1 file changed, 31 insertions(+), 25 deletions(-)
USB keyboard polling failed for some keyboards on PowerPC 5020.
This was caused by requesting only 4 bytes of data from keyboards that
produce an 8 byte HID report.
Signed-off-by: Adrian Cox
Signed-off-by: Wolfgang Denk
Cc: Marek Vasut
---
Changes in v3:
- Fixed checkstyle warnings
- Rena
On 04/09/2014 06:46 PM, Tim Harvey wrote:
On Wed, Apr 9, 2014 at 7:57 AM, Nikita Kiryanov wrote:
Hi Tim,
On 04/03/2014 09:01 AM, Tim Harvey wrote:
This is an attempt at using a macro to allow mx6dl-ddr.h and
mx6q-ddr.h registers to be used together which is needed for an SPL
bootloader
that
On Thursday, April 10, 2014 at 02:29:45 PM, Adrian Cox wrote:
> Update the EHCI driver to support interrupt transfers on PowerPC.
>
> Signed-off-by: Adrian Cox
Applied for -next, thanks!
Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@lists.d
On Thursday, April 10, 2014 at 03:02:44 PM, Adrian Cox wrote:
> USB keyboard polling failed for some keyboards on PowerPC 5020.
> This was caused by requesting only 4 bytes of data from keyboards that
> produce an 8 byte HID report.
>
> Signed-off-by: Adrian Cox
> Signed-off-by: Wolfgang Denk
A
Hi Heiko,
> Hello Lukasz,
>
> Am 10.04.2014 12:08, schrieb Lukasz Majewski:
> > Hi Pantelis,
> >
> >> Hi Marek,
> >>
> >> On Apr 10, 2014, at 10:54 AM, Marek Vasut wrote:
> >>
> >>> On Thursday, April 10, 2014 at 07:08:06 AM, Heiko Schocher wrote:
> add a possibility to add a medium specific
On 04/09/2014 06:32 PM, Tim Harvey wrote:
On Wed, Apr 9, 2014 at 7:55 AM, Nikita Kiryanov wrote:
Hi Tim,
On 04/03/2014 09:01 AM, Tim Harvey wrote:> Add a common header which can
hopefully be shared among imx6 SPL users
Signed-off-by: Tim Harvey
---
include/configs/imx6_spl.h | 64
On 04/09/2014 06:40 PM, Tim Harvey wrote:
On Wed, Apr 9, 2014 at 7:56 AM, Nikita Kiryanov wrote:
Hi Tim,
On 04/03/2014 09:01 AM, Tim Harvey wrote:
Add new function that can take an array of iomux configs, an index, and
a stride to allow a multi-dimentional array of pinmux values to be used
On 04/10/2014 05:08 PM, Nikita Kiryanov wrote:
On 04/09/2014 06:46 PM, Tim Harvey wrote:
On Wed, Apr 9, 2014 at 7:57 AM, Nikita Kiryanov
wrote:
Hi Tim,
On 04/03/2014 09:01 AM, Tim Harvey wrote:
This is an attempt at using a macro to allow mx6dl-ddr.h and
mx6q-ddr.h registers to be used tog
I hope this email is now in the right format.
Hi All,
I am trying to add support for the SPI NOR device on the Freescale
MCIMX6SLEVK Board. I have created a patch that should enable support but
the u-boot probe command still does not find the device. The process fails
during the ECSPI transfer
On Thu, Apr 10, 2014 at 12:05 PM, Sam Catch wrote:
> I hope this email is now in the right format.
>
> Hi All,
>
> I am trying to add support for the SPI NOR device on the Freescale
> MCIMX6SLEVK Board. I have created a patch that should enable support but
> the u-boot probe command still does n
Dear Wolfgang,
With your help, I have satisfied my need.
On 04/09/2014 11:52 PM, Wolfgang Denk wrote:
Dear James,
In message <5345d493.4080...@gmail.com> you wrote:
Heh. As soon as you have to change _any_ code, you can as well
upgrade.
I was hoping (in vain perhaps) to do my work modify
This mirrors the conventions used in other SPI drivers (kirkwood,
davinci, atmel, et al) where the din/dout buffer can be NULL when the
received/transmitted data isn't important. This reduces the need for
allocating additional buffers when write-only/read-only functionality is
needed.
In the din
Dear James,
In message <5346cdc2.40...@gmail.com> you wrote:
>
> With your help, I have satisfied my need.
I'm happy that I was able to help.
Thanks for the summary and your actual code.
> And, I appreciate you help very much.
You are welcome.
Best regards,
Wolfgang Denk
--
DENX Software
I further justify this with a list of drivers that depend on half-duplex
SPI operation:
drivers/mmc/mmc_spi.c: spi_xfer(spi, 2 * 8, tok, NULL, 0);
drivers/mtd/spi/eeprom_m95xxx.c:if (spi_xfer(slave, 8, buf, NULL,
SPI_XFER_BEGIN | SPI_XFER_END))
drivers/mtd/spi/sf_ops.c:
On Thu, Apr 10, 2014 at 9:49 PM, Andrew Ruder
wrote:
> This mirrors the conventions used in other SPI drivers (kirkwood,
> davinci, atmel, et al) where the din/dout buffer can be NULL when the
> received/transmitted data isn't important. This reduces the need for
> allocating additional buffers w
On Fri, Apr 11, 2014 at 12:24:20AM +0530, Jagan Teki wrote:
> At-least from zynq_spi.c case - I wouldn't find that obscure case as you
> pointed
> and even with dout NULL which is status poll from (sf_ops.c).
zynq_spi is correct, soft_spi is not.
zynq_spi.c:
int spi_xfer(struct spi_slave *slave,
On Fri, Apr 11, 2014 at 12:27 AM, Andrew Ruder wrote:
> On Fri, Apr 11, 2014 at 12:24:20AM +0530, Jagan Teki wrote:
>> At-least from zynq_spi.c case - I wouldn't find that obscure case as you
>> pointed
>> and even with dout NULL which is status poll from (sf_ops.c).
>
> zynq_spi is correct, soft
On Fri, Apr 11, 2014 at 12:33:45AM +0530, Jagan Teki wrote:
> >> It would be great if you mentioned issue scenario for status poll case
> >> drivers/mtd/spi/sf_ops.c: ret = spi_xfer(spi, 8, NULL,
> >> &status, 0);
> OK - means issue only with soft_spi.c is it?
Yes, and a couple other
From: Rob Herring
Allow a NULL table to be passed to usb_gadget_get_string for cases
when a string table may not be populated.
Signed-off-by: Rob Herring
---
drivers/usb/gadget/usbstring.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadge
From: Rob Herring
Signed-off-by: Rob Herring
---
include/configs/omap3_beagle.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0b57421..e070760 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3
From: Rob Herring
I'm reviving the Android Fastboot support after 2+ years since the last
posting[1]. The previous postings had some questions about licensing and
source of some code. I believe I've traced the history sufficiently that
the copyrights and source information are complete and cor
From: Rob Herring
Various commands that load images have no checks that a loaded image
does not exceed the available RAM space and will happily continue
overwriting u-boot or other RAM that should not be touched. Also,
some commands such as USB DFU or fastboot need to know the maximum
buffer size
From: Rob Herring
Enable Android Fastboot support on omap3_beagle board.
Signed-off-by: Rob Herring
---
include/configs/omap3_beagle.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0b57421..e070760 100644
--- a/in
From: Sebastian Siewior
This patch adds support for the Android boot-image format. The header
file is from the Android project and got slightly alterted so the struct +
its defines are not generic but have something like a namespace. The
header file is from bootloader/legacy/include/boot/bootimg.
From: Sebastian Siewior
This patch contains an implementation of the fastboot protocol on the
device side and a little of documentation.
The gadget expects the new-style gadget framework.
The gadget implements the getvar, reboot, download and reboot commands.
What is missing is the flash handling
On Thu, Apr 10, 2014 at 2:18 PM, Rob Herring wrote:
> From: Rob Herring
>
> Signed-off-by: Rob Herring
Oops. Ignore this one...
Rob
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
From: Rob Herring
CONFIG_API is needed for u-boot apps such as grub2, so enable it for
distro config.
Cc: Dennis Gilmore
Signed-off-by: Rob Herring
---
include/config_distro_defaults.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/config_distro_defaults.h b/include/config_distro
On Thu, 2014-04-10 at 17:37 +0300, Nikita Kiryanov wrote:
> On 04/09/2014 06:32 PM, Tim Harvey wrote:
> > This presents another challenge for SPL NAND as currently my SPL is
> > ~70K. There is a lot of unnecessary code in the mtd nand layer that
> > I'm including because that layer includes support
From: Rob Herring
Adapt highbank to use config_distro_defaults.h and remove the redundant
defines.
Signed-off-by: Rob Herring
---
include/configs/highbank.h | 25 ++---
1 file changed, 2 insertions(+), 23 deletions(-)
diff --git a/include/configs/highbank.h b/include/confi
From: Rob Herring
Since highbank is actually shared between Highbank and Midway platforms,
remove the Highbank name from the prompt and use the default.
Signed-off-by: Rob Herring
---
include/configs/highbank.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/highbank.h b/inc
A previous series created a way of using if () instead of #ifdef for
controlling feature inclusion in U-Boot. The primary target of that series
was common/main.c which is full of #ifdefs. That work was put on hold while
the kbuild work was in progress.
Since kbuild is now complete, it is time to t
Hush is a command-line interpreter, so rename it to make that clearer.
Signed-off-by: Simon Glass
---
board/keymile/common/common.c | 2 +-
board/keymile/common/ivm.c | 2 +-
common/Makefile| 2 +-
common/{hush.c => cli_hush.c} | 4 ++--
common/main.c | 2
We now have a single entry point to the CLI, whether simple or hush. Put
this in its own file.
Signed-off-by: Simon Glass
---
common/Makefile | 1 +
common/cli.c| 106
common/main.c | 93 --
Move the CLI prototypes from common.h to cli.h as part of an effort to
reduce the size of common.h.
Signed-off-by: Simon Glass
---
board/ait/cam_enc_4xx/cam_enc_4xx.c | 1 +
board/amcc/yucca/cmd_yucca.c| 1 +
board/eltec/elppc/misc.c| 1 +
board/eltec/mhpc/mhpc.c
It doesn't make sense to have the simple parser and the readline code
all in main. Split them out into separate files.
Signed-off-by: Simon Glass
---
common/Makefile |9 +-
common/cli_readline.c | 670
common/cli_simple.c | 338
co
Move these details from main (which doesn't care which parser is used) to
cli.c where they belong.
Signed-off-by: Simon Glass
---
common/cli.c| 22 ++
common/cli_simple.c | 2 +-
common/main.c | 16 ++--
include/cli.h | 13 -
4 fi
It doesn't seem necessary to use memory allocation in this code. The setenv()
will make a copy anyway.
Signed-off-by: Simon Glass
---
common/main.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/common/main.c b/common/main.c
index b0d3ea4..ab1f708 100644
--- a/common/
Some files include hush.h but don't actually use it. Remove this where
possible.
Signed-off-by: Simon Glass
---
arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 1 -
arch/arm/cpu/arm926ejs/orion5x/cpu.c | 1 -
board/ait/cam_enc_4xx/cam_enc_4xx.c | 1 -
board/mcc200/auto_update.c| 7 +-
The main loop is easier to follow if the code is grouped into separate
functions. Make this change, so that main_loop() is easier to read.
Signed-off-by: Simon Glass
---
common/main.c | 47 ++-
1 file changed, 26 insertions(+), 21 deletions(-)
diff -
This code seems unnecessarily complex. We really just need to check the
global_data. Now that is it all in one place, and not arch-specific, this
is pretty easy.
Signed-off-by: Simon Glass
---
arch/m68k/lib/board.c| 7 ---
arch/powerpc/lib/board.c | 8
common/board_r.c
Add a bootretry_ prefix to these two functions, and remove the need for
the #ifdef around everything (it moves to the Makefile).
Signed-off-by: Simon Glass
---
board/hymod/hymod.c | 4 +---
board/hymod/input.c | 8 ++--
common/autoboot.c | 6 +-
common/bootretry.c | 4 ++--
commo
bootdelay_process() never returns in some circumstances, whichs makes the
control flow confusing. Change it so that the decision about how to execute
the boot command is made in the main_loop() code, so it is easier to follow.
Move CLI stuff to cli.c.
Signed-off-by: Simon Glass
---
common/autob
The autoboot code is complex and long. It deserves its own file with
a simple interface from main.c.
Signed-off-by: Simon Glass
---
common/Makefile| 5 +
common/autoboot.c | 363
common/main.c | 366 +--
This makes it clear where the code resides.
Signed-off-by: Simon Glass
---
board/ait/cam_enc_4xx/cam_enc_4xx.c | 2 +-
board/amcc/yucca/cmd_yucca.c| 20 ++--
board/eltec/elppc/misc.c| 14 +++---
board/eltec/mhpc/mhpc.c | 12 ++--
This code is only used by one board, so it seems a shame to clutter up
the readline code with it. Move it into its own file.
Signed-off-by: Simon Glass
---
board/hymod/hymod.c | 1 +
board/hymod/input.c | 1 +
common/Makefile | 5 +
common/autoboot.c | 1 +
common/bootretr
Make funtions static which are locally used in file
and remove the declaration from header file.
Signed-off-by: Manish Badarkhe
---
:100644 100644 a38... b91e948... M
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
:100644 100644 7f9c3f6... 45a325c... M
arch/arm/include/asm/arch-davinci/d
Dear Prabhakar Kushwaha,
Prabhakar Kushwaha freescale.com> writes:
>
> Add support of 2 stage NAND, SD, SPI boot loader using SPL framework.
> here, PBL initialise the internal SRAM and copy SPL(160KB). This further
> initialise DDR using SPD and environment and copy u-boot(768 KB) from NAND
t
Hello Lukasz,
Am 10.04.2014 16:31, schrieb Lukasz Majewski:
Hi Heiko,
Hello Lukasz,
Am 10.04.2014 12:08, schrieb Lukasz Majewski:
Hi Pantelis,
Hi Marek,
On Apr 10, 2014, at 10:54 AM, Marek Vasut wrote:
On Thursday, April 10, 2014 at 07:08:06 AM, Heiko Schocher wrote:
add a possibility
From: Shaohui Xie
There should be a break for case PHY_INTERFACE_MODE_SGMII, otherwise it
will fall into case PHY_INTERFACE_MODE_RGMII.
Signed-off-by: Shaohui Xie
---
board/freescale/t104xrdb/eth.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/freescale/t104xrdb/eth.c b/board/frees
On Thu, Apr 10, 2014 at 7:51 AM, Nikita Kiryanov wrote:
> On 04/10/2014 05:08 PM, Nikita Kiryanov wrote:
>
> Here I'm referring to the file arch/arm/include/asm/arch-mx6/mx6_ddr_regs.h
> (which I'm guessing you may have already seen based on your comment on
> patch 11...)
>
Nikita,
Yes, I start
If card and host are supported DDR mode, then it can be used the DDR mode.
This patch-set has dependency about beomho's patch-set.
(Based-on u-boot-samsung repository)
It's result for loading image.
sdhci controller ->5260488 bytes read in 259 ms (19.4 MiB/s)
dwmmc controller without DDR mode ->
From: Beomho Seo
This patch add dwmmc emmc controller node on exynos4 and exynos4412 device tree.
Signed-off-by: Beomho Seo
Signed-off-by: Jaehoon Chung
Tested-by: Piotr Wilczek
Cc: Lukasz Majewski
Cc: Piotr Wilczek
Cc: Minkyu Kang
---
arch/arm/dts/exynos4.dtsi |8
a
From: Beomho Seo
For use dwmmc controller at exynos4, add SDMMC4 gpio configuration.
In case SDMMC2, do not use 8 bit mode at exynos4.
Signed-off-by: Beomho Seo
Signed-off-by: Jaehoon Chung
Tested-by: Piotr Wilczek
Cc: Lukasz Majewski
Cc: Piotr Wilczek
Cc: Minkyu Kang
---
arch/arm/cpu/arm
Exynos4 can be used the dwmmc controller for eMMC.
Then it needs to check dwmmc_init() at first.
Signed-off-by: Jaehoon Chung
Reviewed-by: Lukasz Majewski
Tested-by: Lukasz Majewski
Acked-by: Lukasz Majewski
---
board/samsung/common/board.c | 13 ++---
1 file changed, 6 insertions(+
Modified the mmc_set_clock for eynos4.
The goal of this patch is that fsys-div register should be reset.
And retore the div-value, not using the value of lowlevel_init.
(For using SDMMC4, this patch is needs)
Signed-off-by: Jaehoon Chung
Tested-by: Lukasz Majewski
Acked-by: Lukasz Majewski
---
Support the DDR mode at dw-mmc controller
Signed-off-by: Jaehoon Chung
Tested-by: Lukasz Majewski
Acked-by: Lukasz Majewski
---
drivers/mmc/dw_mmc.c | 12 ++--
include/dwmmc.h |3 +++
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/dw_mmc.c b/driv
Enabled the dw-mmc controller.
Signed-off-by: Jaehoon Chung
Tested-by: Lukasz Majewski
Acked-by: Lukasz Majewski
---
arch/arm/dts/exynos4412-trats2.dts |6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/exynos4412-trats2.dts
b/arch/arm/dts/exynos4412-trat
Restore the platdata(property of dt) into host struct.
Then data's information is maintained and reused anywhere.
Signed-off-by: Jaehoon Chung
Tested-by: Lukasz Majewski
Acked-by: Lukasz Majewski
---
drivers/mmc/exynos_dw_mmc.c | 208 +++
include/dwmmc.
Set the ddr mode capability by default.
Signed-off-by: Jaehoon Chung
Tested-by: Lukasz Majewski
Acked-by: Lukasz Majewski
---
drivers/mmc/exynos_dw_mmc.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 131ff72..96b5ab6 1006
Signed-off-by: Jaehoon Chung
Reviewed-by: Lukasz Majeski
Tested-by: Lukasz Majewski
Acked-by: Lukasz Majewski
---
drivers/mmc/mmc.c |2 +-
include/mmc.h | 18 ++
2 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
inde
1 - 100 of 105 matches
Mail list logo
