Hi Tom,
please pull these two patches to your tree.
I have sent them to mailing list as RFC and only Wolfgang's concern
was if this breaks using dcc as console. We have done these patches
because we couldn't use dcc as console. It means this patch fix
the problem with dcc driver.
In mainline u-boo
Hi, experts:
It seems if user wants to enable FIT support in U-boot, must define
these 3 macro in related config.h
/* Enable flat device tree support */
#define CONFIG_LMB 1
#define CONFIG_FIT 1
#define CONFIG_OF_LIBFDT 1
CONFIG_LMB is a required item for ARM SOC platform?
Best
Dear Pantelis,
Welcome to take care of u-boot-mmc.
Could you merge this patch?
Best Regards,
Jaehoon Chung
On 07/19/2013 05:44 PM, Jaehoon Chung wrote:
> Samsung SoC is supported the WIDE8, even if Controller version is v2.0.
> So add the SDHCI_QUIRK_USE_WIDE8 for Samsung-SoC.
>
> Signed-off-b
Hi Jaehoon,
On Aug 13, 2013, at 11:52 AM, Jaehoon Chung wrote:
> Dear Pantelis,
>
> Welcome to take care of u-boot-mmc.
>
Thanks
> Could you merge this patch?
>
Please hold on a bit; we're still in the process of passing over the (mmc)
torch.
That patch looks good.
> Best Regards,
> Jaeh
On Tue, Aug 13, 2013 at 2:17 PM, wrote:
> Hi, experts:
>
> It seems if user wants to enable FIT support in U-boot, must define
> these 3 macro in related config.h
>
> /* Enable flat device tree support */
>
> #define CONFIG_LMB 1
This is required, but when u define CONFIG_FIT, this will
auto
There was a bug for calculating ddr_freq_mhz,
it should be divided by 100 rather than 0x100.
Signed-off-by: Shengzhou Liu
---
board/freescale/p1010rdb/spl_minimal.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board/freescale/p1010rdb/spl_minimal.c
b/board/f
Add support for freescale P1010RDB-PB board.
Signed-off-by: Shengzhou Liu
---
board/freescale/p1010rdb/law.c |2 -
board/freescale/p1010rdb/p1010rdb.c | 302 ---
board/freescale/p1010rdb/tlb.c |4 -
boards.cfg | 21 +++
Hi Tom,
The following changes since commit d62a89bd5b5033649a90fa5bfe0f5b32013ca8f8:
mpc5200: Misc updates to a3m071 config header (2013-08-12 21:11:24 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mips.git master
for you to fetch changes up to 4b17645d5d60a9aa8ef
This flag is to make console aware that NET transfer is running or not.
Signed-off-by: Jim Lin
---
Changes in v2:
1. Change configuration name from CONFIG_CTRLC_POLL_MS to CONFIG_CTRLC_POLL_S.
2. New code will be executed only when CONFIG_CTRLC_POLL_S is defined in
configuration header file
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
Signed-off-by: Jim Lin
---
Changes in v2:
1. Change configuration name from CONFIG_CTRLC_POLL_MS to CONFIG_CTRLC_P
On 08/13/2013 06:01 PM, Pantelis Antoniou wrote:
> Hi Jaehoon,
>
> On Aug 13, 2013, at 11:52 AM, Jaehoon Chung wrote:
>
>> Dear Pantelis,
>>
>> Welcome to take care of u-boot-mmc.
>>
>
> Thanks
>
>> Could you merge this patch?
>>
>
> Please hold on a bit; we're still in the process of passing
Hi Stephen,
> Could you expand upon what "handles booting from extX directly" means?
> Upstream U-Boot has supported ext2/3 for as long as I've been involved
> with it (which admittedly isn't that long), and ext4 support was added
> recently. This allows U-Boot commands "extload" or "load" to acce
Dear Minkyu Kang,
On 05/21/2013 03:00 PM, Piotr Wilczek wrote:
This patch add support for new multi function pmic max77693.
The driver is split into three modules: pmic, muic and fuelgage.
Signed-off-by: Piotr Wilczek
Signed-off-by: Kyungmin Park
CC: Minkyu Kang
---
Makefile
On Mon, Aug 12, 2013 at 11:42:50PM +0200, Anatolij Gustschin wrote:
> Hey Tom,
>
> The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
>
> nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
>
> are available in the git repository at:
>
> git://git.de
On Tue, Aug 13, 2013 at 12:42:36PM +0200, Daniel Schwierzeck wrote:
> Hi Tom,
>
> The following changes since commit d62a89bd5b5033649a90fa5bfe0f5b32013ca8f8:
>
> mpc5200: Misc updates to a3m071 config header (2013-08-12 21:11:24 +0200)
>
> are available in the git repository at:
>
> git:/
On Wed, Aug 7, 2013 at 5:53 PM, Javier Martinez Canillas
wrote:
> Now that Device Tree support for IGEP boards has been included
> in the mainline Linux kernel, it's better if the default boot
> command has proper support for booting with DT.
>
> This patch-set his composed of the following patche
Hi Heiko,
Original Message
Subject: [PATCH] i2c, omap24xx: convert driver to new mutlibus/mutliadapter
framework
Date: Sat, 3 Aug 2013 06:58:25 +0200
From: Heiko Schocher
To: u-boot@lists.denx.de
CC: Heiko Schocher , Tom Rini , Lars Poeschel , Steve Sakoman , Thomas Weber
,
On Sat, Aug 03, 2013 at 02:11:04AM -0500, Dennis Gilmore wrote:
> Hi all,
>
> I wanted to start a discussion on defining a unified feature set that
> makes it simpler for the different distros to support ARM systems using
> u-boot. I have based a lot of my thoughts on how calxeda ship their
> sys
On Sat, Jul 20, 2013 at 07:36:12PM -0400, Tom Rini wrote:
> On Sat, Jul 20, 2013 at 05:29:19PM -0600, Simon Glass wrote:
> > +Stephen
> >
> > Hi Tom,
> >
> > On Sat, Jul 20, 2013 at 4:38 PM, Tom Rini wrote:
> >
> > > On Sat, Jul 20, 2013 at 04:06:27PM -0600, Simon Glass wrote:
> > > > Hi,
> > >
On 30/07/13 14:28, Tom Rini wrote:
> On Thu, Jul 18, 2013 at 03:12:57PM -0400, Tom Rini wrote:
>
>> Hey all,
>>
>> This series adds NOR support to am335x_evm, along with a few generic
>> changes to make gpmc clearer (for per-board things like different NOR
>> chips, etc). This series depends on t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 08/13/2013 10:57 AM, Mark Jackson wrote:
> On 30/07/13 14:28, Tom Rini wrote:
>> On Thu, Jul 18, 2013 at 03:12:57PM -0400, Tom Rini wrote:
>>
>>> Hey all,
>>>
>>> This series adds NOR support to am335x_evm, along with a few
>>> generic changes to
On 13/08/13 16:00, Tom Rini wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 08/13/2013 10:57 AM, Mark Jackson wrote:
>> On 30/07/13 14:28, Tom Rini wrote:
>>> On Thu, Jul 18, 2013 at 03:12:57PM -0400, Tom Rini wrote:
>>>
Hey all,
This series adds NOR support to am335
On Tue, Aug 13, 2013 at 03:28:25PM +0200, Javier Martinez Canillas wrote:
> On Wed, Aug 7, 2013 at 5:53 PM, Javier Martinez Canillas
> wrote:
> > Now that Device Tree support for IGEP boards has been included
> > in the mainline Linux kernel, it's better if the default boot
> > command has proper
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 08/13/2013 11:06 AM, Mark Jackson wrote:
> On 13/08/13 16:00, Tom Rini wrote:
>> -BEGIN PGP SIGNED MESSAGE- Hash: SHA1
>>
>> On 08/13/2013 10:57 AM, Mark Jackson wrote:
>>> On 30/07/13 14:28, Tom Rini wrote:
On Thu, Jul 18, 2013 at 03:
On 13/08/13 16:11, Tom Rini wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 08/13/2013 11:06 AM, Mark Jackson wrote:
>> On 13/08/13 16:00, Tom Rini wrote:
>>> -BEGIN PGP SIGNED MESSAGE- Hash: SHA1
>>>
>>> On 08/13/2013 10:57 AM, Mark Jackson wrote:
On 30/07/13 14:28, T
On 08/11/2013 09:05 AM, feng...@phytium.com.cn wrote:
> From: fenghua
>
> This patch provide u-boot with arm64 support. Currently, it works on
> Foundation Model for armv8 or Fast Model for armv8.
>
> Signed-off-by: fenghua
It boots! Even it has a lot of compiling warning, but it is really a
On Mon, Aug 12, 2013 at 03:43:29PM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit d05bfd0586ccebe96e31976459c8ef45ec65e109:
>
> Merge branch 'master' of git://git.denx.de/u-boot-i2c (2013-08-06
> 09:49:06 -0400)
>
> are available in the git repository at:
>
>
> git:/
On 13/08/13 16:20, Mark Jackson wrote:
> On 13/08/13 16:11, Tom Rini wrote:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> On 08/13/2013 11:06 AM, Mark Jackson wrote:
>>> On 13/08/13 16:00, Tom Rini wrote:
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1
On 08/13/2013 10:57 A
On Tue, Aug 13, 2013 at 12:48 PM, Mårten Wikman wrote:
> 2013/8/11 Otavio Salvador :
>> On Sun, Aug 11, 2013 at 10:49 AM, Mårten Wikman
>> wrote:
>>> This adds necessary information on how to use U-boot on SPI NOR on MX28evk
>>>
>>> Signed-off-by: Marten Wikman
>>
>> Marten,
>>
>> The patch loo
2013/8/11 Otavio Salvador :
> On Sun, Aug 11, 2013 at 10:49 AM, Mårten Wikman
> wrote:
>> This adds necessary information on how to use U-boot on SPI NOR on MX28evk
>>
>> Signed-off-by: Marten Wikman
>
> Marten,
>
> The patch looks right and complete; I'd just split it in two patches:
>
> - add
NanoBone Specification:
---
CPU:
TI AM335x
Memory:
256MB DDR3
64MB NOR flash
256MB NAND flash
128KB FRAM
Ethernet:
2 x 10/100 connected to SMSC LAN8710 PHY
USB:
1 x USB2.0 Type A
I2C:
2Kbit EEPROM (Microchip 24AA02)
RTC (Maxim DS1338)
GPIO Expander (Micro
On Tue, Aug 13, 2013 at 05:09:57PM +0100, Mark Jackson wrote:
> +++ b/board/newflow/nanobone/board.c
[snip]
> +#if defined(CONFIG_SPL_BUILD) || (CONFIG_NOR_BOOT)
> +//static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
> +#endif
Here and elsewhere, remove commented out code.
On 07/25/2013 12:44 AM, ying.zh...@freescale.com wrote:
> From: Ying Zhang
>
> Due to the nand SPL on some board(e.g. P1022DS)has a size limit, it can
> not be more than 4K. So, the SPL cannot initialize the DDR with the SPD
> code. This patch introduces TPL to enable a loader stub that is loaded
Hi Tom,
On Sat, Aug 10, 2013 at 7:21 PM, Tom Warren wrote:
>
> Simon,
>
>
>
> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
> Sent: Friday, August 09, 2013 9:04 PM
> To: Stephen Warren
> Cc: U-Boot Mailing List; Tom Warren; Stephen Warren; tr...@ti.com
> Subject: Re: [PA
On 08/13/2013 01:34 PM, Simon Glass wrote:
> Hi Tom,
>
> On Sat, Aug 10, 2013 at 7:21 PM, Tom Warren wrote:
>>
>> Simon,
>>
>> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
...
>> I put tegra: on the front expecting it to go that way, but it doesn't
>> matter. Also your
Hello Benoît,
On 08/12/2013 12:08 AM, Benoît Thébaudeau wrote:
On Sunday, August 11, 2013 10:58:36 PM, Jeroen Hofstee wrote:
To be EABI compliant (r9 is a platform specific register) and as
a prepration for building u-boot with clang/llvm (with does / will
support r9 as reserved register), stor
Hi,
On 08/12/2013 05:23 PM, Wolfgang Denk wrote:
Dear Albert,
In message <20130812164406.5a6807e7@lilith> you wrote:
IIRC, r9 is used as GOT pointer ?
No, it is not, well, not any more since GOT-based relocation was
replaced by ELF relocation, which requires no reserved register.
In any cas
On 07/25/2013 12:44 AM, ying.zh...@freescale.com wrote:
> From: Ying Zhang
>
> Enable p1022ds to start from eSDHC with SPL.
>
> Signed-off-by: Ying Zhang
>
Ying,
Does this patch need anything out of this set? I can't get the following
targets built
P1022DS_SPIFLASH
P1022DS_36BIT_SPIFLASH
P1
On Tue, 2013-08-13 at 05:00 +, Gupta, Pekon wrote:
> > > - CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
> > > Include API for S/W library (lib/bch.c) so included that here..
> > > But this ECC scheme should be used only for older OMAP platforms where
> > > ELM is not present
> > >
> > > - CO
On 07/26/2013 03:02 AM, Valentin Longchamp wrote:
> If the DDR3 module supports industrial temperature range and requires
> the x2 refresh rate for that temp range, the refresh period must be
> 3.9us instead of 7.8 us.
>
> Signed-off-by: Valentin Longchamp
>
> ---
> arch/powerpc/cpu/mpc8xxx/ddr/
On 07/26/2013 03:02 AM, Valentin Longchamp wrote:
> If this #define stays in config_mpc85xx.h, the P2041 based boards must
> define a lot of SRIO values even if they do not implement a SRIO device.
>
> The #define is moved into the P2041RDB board config file where it is
> used.
>
> Signed-off-by:
On 07/26/2013 03:02 AM, Valentin Longchamp wrote:
> This can be useful if we want to disable an interface in u-boot and
> later reenable them, so that it looks available when trying to fix the
> FDT or for the kernel.
>
> Signed-off-by: Valentin Longchamp
>
> ---
> drivers/net/fm/init.c | 7
On Fri, 2013-07-26 at 12:02 +0200, Valentin Longchamp wrote:
> NAND_ECC_SOFT was the only option available while the SOFT_BCH option
> may also be used.
>
> Signed-off-by: Valentin Longchamp
> ---
> drivers/mtd/nand/fsl_elbc_nand.c | 6 +-
> 1 file changed, 5 insertions(+), 1 deletion(-)
Ac
On Tue, Aug 13, 2013 at 09:22:12AM +0200, Michal Simek wrote:
> Hi Tom,
>
> please pull these two patches to your tree.
> I have sent them to mailing list as RFC and only Wolfgang's concern
> was if this breaks using dcc as console. We have done these patches
> because we couldn't use dcc as cons
On Wed, Aug 07, 2013 at 10:20:01AM -0600, Stephen Warren wrote:
> On 08/06/2013 11:52 PM, Simon Glass wrote:
> > Tegra recently moved to the new I2C framework, which sets up I2C prior to
> > relocation, and prior to calling i2c_init_board(). This causes a crash on
> > Tegra boards.
> >
> > note:
>
On 07/31/2013 08:31 AM, Shruti Kanetkar wrote:
> Makes the startup output more consistent
>
> Signed-off-by: Shruti Kanetkar
> Acked-by: Andy Fleming
>
> ---
> arch/powerpc/cpu/mpc824x/cpu.c | 8 +++-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 8 +---
> arch/powerpc/cpu/mpc8xx/cpu.c
On Fri, 2013-07-26 at 12:02 +0200, Valentin Longchamp wrote:
> This patch introduces the support for Keymile's kmp204x reference
> design. This design is based on Freescale's P2040/P2041 SoC.
>
> The peripherals used by this design are:
> - DDR3 RAM with SPD support
> - SPI NOR Flash as boot mediu
On Thu, 2013-07-11 at 17:27 +0900, Masahiro Yamada wrote:
> If a non-zero value is given to only_oob argument,
> printing the main area is skipped.
>
> With a little modification, we can skip the whole
> while loop.
>
> Signed-off-by: Masahiro Yamada
> ---
> common/cmd_nand.c | 13 -
On 07/26/2013 03:02 AM, Valentin Longchamp wrote:
> +
> +phys_size_t initdram(int board_type)
> +{
> + phys_size_t dram_size = 0;
> +
> + puts("Initializing");
> +
> + if (fsl_use_spd()) {
> + puts("using SPD\n");
> + dram_size = fsl_ddr_sdram();
> + } el
On 08/05/2013 03:43 AM, Ramneek Mehresh wrote:
> Erratum-A006918 prevents internal UTMI dual phy pll inside T4240
> rev 1.0 from starting sometimes. Workaround involves restarting
> phy pll maximum seven times with 1ms delay in each loop
>
> Signed-off-by: Ramneek Mehresh
> Signed-off-by: Suresh
On 08/05/2013 03:43 AM, Ramneek Mehresh wrote:
> Erratum-A006918 prevents internal UTMI phy pll from starting
> sometimes. Workaround involves restarting phy pll maximum seven
> times with 1ms delay in each loop. If pll still fails to start
> after max retries, "status" property is set to "fail-err
On Mon, 2013-08-12 at 00:05 +0800, feng...@phytium.com.cn wrote:
> From: fenghua
>
> This patch provide u-boot with arm64 support. Currently, it works on
> Foundation Model for armv8 or Fast Model for armv8.
>
> Signed-off-by: fenghua
Could you provide a proper signoff (full name and valid e-m
On Mon, 2013-08-12 at 00:05 +0800, feng...@phytium.com.cn wrote:
> diff --git a/arch/arm64/cpu/armv8/exceptions.S
> b/arch/arm64/cpu/armv8/exceptions.S
> new file mode 100644
> index 000..376df49
> --- /dev/null
> +++ b/arch/arm64/cpu/armv8/exceptions.S
> @@ -0,0 +1,210 @@
> +/*
> + * Copyrigh
On Tue, 2013-08-13 at 16:43 +0800, Shengzhou Liu wrote:
> Add support for freescale P1010RDB-PB board.
>
> Signed-off-by: Shengzhou Liu
> ---
> board/freescale/p1010rdb/law.c |2 -
> board/freescale/p1010rdb/p1010rdb.c | 302
> ---
> board/freescale/p10
Hi, Tom,
This patch hasn't been applied? I think it should be applied early and
it is needed by other patches of this set.
Thanks.
-Original Message-
From: Tom Rini [mailto:tom.r...@gmail.com] On Behalf Of Tom Rini
Sent: Friday, June 28, 2013 5:57 AM
To: Wood Scott-B07421
> -原始邮件-
> 发件人: "Scott Wood"
> 发送时间: 2013年8月14日 星期三
> 收件人: feng...@phytium.com.cn
> 抄送: u-boot@lists.denx.de, tr...@ti.com
> 主题: Re: [U-Boot] [PATCH] part1 of arm64. This patch provide u-boot with arm64
> support. Currently it works on Foundation Model for armv8 or Fast Model for
> ar
chip->ecc.calculate() is used for calculating and fetching of ECC syndrome by
processing the data passed during Read/Write accesses.
All H/W based ECC schemes use GPMC controller to calculate ECC syndrome.
But each BCHx_ECC scheme has its own implemetation of post-processing and
fetching ECC syndr
BCH8_ECC scheme implemented in omap_gpmc.c driver has following two favours
+---+-+-+
|ECC Scheme | ECC Calculation | Error Detection |
+---+-+-+
|
chip->ecc.hwctl() is used for preparing the H/W controller before read/write
NAND accesses (like assigning data-buf, enabling ECC scheme configs, etc.)
Though all ECC schemes in OMAP NAND driver use GPMC controller for generating
ECC syndrome (for both Read/Write accesses). But but in current code
[changes in v2]
- added documentation for CONFIG_NAND_OMAP_xx in doc/README.nand
- added CONFIG_BCH along with CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
to include software library lib/bch.c
- fixed board_nand_init() and omap_enable_hwecc()
[Original v1]
This patch series updates BCH8_ECC s
chip->ecc.correct() is used for detecting and correcting bit-flips during read
operations. In omap-nand driver it implemented as:
(a) omap_correct_data(): for h/w based ECC_HAM1 scheme
(b) omap_correct_data_bch() + CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
for ECC_BCH8 scheme using GPM
On Monday 12 August 2013 11:06 PM, Mugunthan V N wrote:
> On Monday 12 August 2013 07:52 PM, Tom Rini wrote:
> +#define GMII2_SEL_MII0x0
+#define GMII2_SEL_RMII0x4
+#define GMII2_SEL_RGMII 0x8
+#define GMII2_SEL_NOTUSED 0x
62 matches
Mail list logo
