On 13/08/13 16:11, Tom Rini wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 08/13/2013 11:06 AM, Mark Jackson wrote: >> On 13/08/13 16:00, Tom Rini wrote: >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >>> >>> On 08/13/2013 10:57 AM, Mark Jackson wrote: >>>> On 30/07/13 14:28, Tom Rini wrote: >>>>> On Thu, Jul 18, 2013 at 03:12:57PM -0400, Tom Rini wrote: >>>>> >>>>>> Hey all, >>>>>> >>>>>> This series adds NOR support to am335x_evm, along with a >>>>>> few generic changes to make gpmc clearer (for per-board >>>>>> things like different NOR chips, etc). This series >>>>>> depends on the last go-round of the am335x falcon mode docs >>>>>> as that adds the README that I add more content to. And >>>>>> while I say this in 3/8, to be clear, I expect to drop 3/8 >>>>>> in favor of Justin Waters' way of doing this instead, I >>>>>> just include this here for completeness and will get it all >>>>>> happy together when I assemble things in u-boot-ti. >>>>>> >>>>>> The big changes in v4 are: - Apply again to master which >>>>>> includes a few non-trivial updates, so the linker script >>>>>> got re-synced. - After checking what's going on, and >>>>>> testing with NAND again, we can be common with >>>>>> gpmc_cfg->irqstatus/enable, and only set documented bits >>>>>> in gpmc_cfg->config >>>>> >>>>> Applied to u-boot-ti/master, thanks! >>>> >>>> I'm now rebasing our NanoBone code onto the TI uboot code, but >>>> I'm coming up with the original issue [1] of having to not >>>> check for the R_ARM_RELATIVE relocations again. >>> >>> Your linker script is out of sync with arch/arm/cpu/u-boot.lds >> >> Strange ... since the am335x nor_boot compile appeared to work >> fine, I just copied the script from board/ti/am335x, and assumed >> it would work fine for me (with a library path change). >> >> So does this TI file also need updating ? >> >> Either way, my code now compiles. > > I had to re-sync the TI one in this series as well. Double check > between what you have working now vs before, there's a few small > changes there...
Doh ... I was copying the script from the non-TI branch of uboot !! :-( _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
