On 28/12/12 17:30, Jaehoon Chung wrote:
> To get exactly clock value for mmc, support the get_mmc_clk() like
> set_mmc_clk().
>
> Signed-off-by: Jaehoon Chung
> Signed-off-by: Kyungmin Park
> ---
> arch/arm/cpu/armv7/exynos/clock.c | 102
>
> arch/arm/inc
On 28/12/12 17:30, Jaehoon Chung wrote:
> Mobile storage is used the CLK_DIV_FSYS3 value.
>
> Signed-off-by: Jaehoon Chung
> Signed-off-by: kyungmin Park
> ---
> arch/arm/cpu/armv7/exynos/clock.c |5 +
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
applied to u-boot-samsung.
Th
Hi Joe,
On 12/12/2012 05:16 AM, Joe Hershberger wrote:
> Add support for per-variable callbacks to the "hashtable" functions.
I just noticed using latest master branch that booting on a NOR
flash based board (sequoia, PPC440EPx based) a quite big delay
(1..2 seconds) is added upon env_relocate()
HI Forks：
I have question about why memory info from fdt (memory size) will be
overwritten by
those come from u-boot source code.
function fixup_memory_node() in bootm.c
when CONFIG_OF_LIBFDT is defined, then memory node information will be
updated
says that, if I set memory 2G in fdt file, th
Hello,
On Thu, 10 Jan 2013 15:39:42 -0800
Darcy Watkins wrote:
> Hello,
>
> I encountered an issue running an e1000 ethernet device with u-boot
> on an x86 (geode) and determined that the patch given in message
> # 122700 (April 2012) appears to fix it. Was that not committed
> for some reason
On 11/01/13 16:06, Ajay Kumar wrote:
> u-boot compilation fails for smdk5250 when we deselect CONFIG_LCD
> from the main config file.
>
> Following error was observed:
> drivers/video/libvideo.o: In function `exynos_lcd_init':
> /home/ajay/u-boot-samsung/drivers/video/exynos_fb.c:68: undefined ref
On 11/01/13 16:06, Ajay Kumar wrote:
> We enable console multiplexing and use both serial and LCD for stdout/stderr.
> Initially, u-boot output console is observed via serial port.
> If you also have a DP panel connected onto your SMDK5250 board,
> you can switch to LCD console by typing "setenv st
Dear Albert,
Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to a2468dedef569863e1243e802fbe3aa7565e1de1:
EXYNOS5: Enable console multiplexing in u-bo
Hello,
i'm not sure if this is the right place for this question...however, here it is:
i'm using a BDI3000 to program uboot to the flash (Spansion S29GL512P) on a
MPC5200B base board. Erasing / Programming works fine as long as the flash
sectors are not protected (via PPB bit). On a protected
Hi Scott,
On 01/10/2013 01:56:30 AM, Dimitar Penev wrote:
Hello,
First of all sorry if this question was already answered here.
We are sourcing some K9F8G08U0M-PIB0 NAND flash devices.
On the first erase in uboot 2011.09 I got bunch of mostly consecutive
bad blocks.
According to the datashee
Enabling the non-dt path for the driver so that
we don't get any build errors for non-dt configuration.
Signed-off-by: Vivek Gautam
---
Earlier we had moved to fdt support for ehci-exynos driver, but
missed out the non-dt path. Although this driver serves for exysno5
onward only but better to ke
On Fri, Jan 11, 2013 at 5:13 AM, Dirk Behme wrote:
> From: Knut Wohlrab
>
> The USB host interface is routed to plug USB1/J30 on the mother board.
>
> Signed-off-by: Knut Wohlrab
Acked-by: Fabio Estevam
___
U-Boot mailing list
U-Boot@lists.denx.de
ht
On 11/01/2013 08:13, Dirk Behme wrote:
> From: Knut Wohlrab
>
> The USB host interface is routed to plug USB1/J30 on the mother board.
>
> Signed-off-by: Knut Wohlrab
> ---
Hi Dirk,
> board/freescale/mx6qsabreauto/mx6qsabreauto.c |7 +++
> include/configs/mx6qsabreauto.h
Hi Georg,
On 01/11/2013 08:41 AM, Waibel Georg wrote:
> i'm not sure if this is the right place for this question...however,
> here it is:
>
> i'm using a BDI3000 to program uboot to the flash (Spansion S29GL512P)
> on a MPC5200B base board. Erasing / Programming works fine as long as
> the flash
Dear Vivek Gautam,
> Enabling the non-dt path for the driver so that
> we don't get any build errors for non-dt configuration.
>
> Signed-off-by: Vivek Gautam
Apply on the -samsung please
Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@lists
Hi Marek,
CCing Simon Glass, Minkyu Kang.
On Fri, Jan 11, 2013 at 3:02 PM, Marek Vasut wrote:
> Dear Vivek Gautam,
>
>> Enabling the non-dt path for the driver so that
>> we don't get any build errors for non-dt configuration.
>>
>> Signed-off-by: Vivek Gautam
>
> Apply on the -samsung please
Hi Satendra,
On Fri, Jan 11, 2013 at 11:02 AM, Satendra Pratap
wrote:
> Vivek Gautam gmail.com> writes:
>
>>
>> Hi,
>>
>> On Tue, Oct 23, 2012 at 6:30 PM, Wolfgang Denk denx.de> wrote:
>> > Dear Vivek Gautam,
>> >
>> > In message <1350989687-32102-3-git-send-email-gautam.vivek
>> > samsung.c
Hi Minkyu Kang,
Thank you for comments.
On Fri, Jan 11, 2013 at 1:24 PM, Minkyu Kang wrote:
> Dear Rajeshwari,
>
> On 07/01/13 22:08, Rajeshwari Shinde wrote:
>> This patch converts lowlevel_init.S to lowlevel_init_c.c for
>> SMDK5250.
>> Lowlevel.S as of now added only for SMDK5250 and same can
Hi Minkyu,
Please do let me know if any comments for same.
Regards,
Rajeshwari Shinde.
On Thu, Dec 27, 2012 at 11:29 AM, Rajeshwari Birje
wrote:
> Minkyu Kang,
>
> Please do let me know if any comments regarding this patch.
>
> Regards,
> Rajeshwari Shinde.
--
Regards,
Rajeshwari Shinde
___
Hi Simon,
Thank you for comments.
On Thu, Jan 10, 2013 at 11:04 PM, Simon Glass wrote:
> Hi Rajeshwari,
>
> On Mon, Jan 7, 2013 at 5:08 AM, Rajeshwari Shinde
> wrote:
>> This patch converts lowlevel_init.S to lowlevel_init_c.c for
>> SMDK5250.
>> Lowlevel.S as of now added only for SMDK5250 and
Dear Simon Glass,
> This allows passing of entire scripts to sandbox with the -c argument,
> which is useful for testing. Commands can be delimited with a newline
> or semicolon.
>
> Signed-off-by: Simon Glass
Reviewed-by: Marek Vasut
> ---
> arch/sandbox/cpu/start.c |2 +-
> 1 files cha
Dear Simon Glass,
> Enhance the source command to work with sandbox, by using map_sysmem() to
> convert a ulong address into a pointer.
>
> Signed-off-by: Simon Glass
Reviewed-by: Marek Vasut
Best regards,
Marek Vasut
___
U-Boot mailing list
U-Boot@
Dear Simon Glass,
> Add a new method for saving that filesystems can implement. This mirrors
> the existing load method.
>
> Signed-off-by: Simon Glass
Reviewed-by: Marek Vasut
btw what about fat write support, can this map somehow on it?
Best regards,
Marek Vasut
___
Dear Simon Glass,
> This allows write of files from the host filesystem in sandbox. There is
> currently no concept of overwriting the file and removing its existing
> contents - all writing is done on top of what is there. This means that
> writing 10 bytes to the start of a 1KB file will only up
Dear Simon Glass,
> With fewer #ifdefs the code is more readable and more of the code is
> compiled for all boards. Add defines in the header file to control
> what features are enabled, and then use if() instead of #ifdef.
>
> Signed-off-by: Simon Glass
Did you try building it with ELDK 4.2 an
Dear Simon Glass,
> Rather than having similar code in powerpc, use image_setup_linux() which
> should be common across all architectures that use the FDT.
>
> Signed-off-by: Simon Glass
Reviewed-by: Marek Vasut
Best regards,
Marek Vasut
___
U-Boot
Dear Simon Glass,
> Use the common FDT setup function that is now available in image. Move
> the FDT-specific code to a new bootm-fdt.c and remove unused headers
> from bootm.c.
>
> Signed-off-by: Simon Glass
Reviewed-by: Marek Vasut
Best regards,
Marek Vasut
_
Dear Simon Glass,
> Rather than having similar code in m68k, use image_setup_linux() which
> should be common across all architectures that use the FDT.
>
> Signed-off-by: Simon Glass
Reviewed-by: Marek Vasut
Best regards,
Marek Vasut
___
U-Boot mai
From: Lars Poeschel
Signed-off-by: Lars Poeschel
---
arch/arm/include/asm/arch-am33xx/mux.h |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-am33xx/mux.h
b/arch/arm/include/asm/arch-am33xx/mux.h
index aed6b00..460ac1c 100644
--- a/arch/arm/incl
From: Lars Poeschel
The board is named pcm051 and has this hardware:
SOC: TI AM3359
DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB
ETH 1: LAN8710AI
SPI-Flash: W25Q64BVSSIG
RTC: RV-4162-C7
I2C-EEPROM: CAT32WC32
NAND: MT29F4G08_VFPGA63
PMIC: TPS65910A3
LCD
Supported:
UART 1
MMC/SD
ETH 1
USB
I2C
SPI
Not
From: Lars Poeschel
When ethaddr is not set in environment the MAC address is read
from efuse. The message was only printed in debug case, but this
message could be of interest for the ordinary user, so printf it.
Signed-off-by: Lars Poeschel
---
board/ti/am335x/board.c |2 +-
1 file chang
Hi Simon / Jaehoon,
Thanks for review comments.
Please find the responses below.
Thanks & Regards
Amarendra Reddy
On 11 January 2013 11:14, Simon Glass wrote:
> Hi Jaehoon,
>
> On Thu, Jan 10, 2013 at 8:12 PM, Jaehoon Chung
> wrote:
> > On 01/11/2013 12:33 AM, Simon Glass wrote:
> >> Hi Amar,
The clock data are not used by the driver, drop them.
Signed-off-by: Marek Vasut
Cc: Andy Fleming
Cc: Fabio Estevam
Cc: Stefano Babic
---
drivers/mmc/mxsmmc.c | 12
1 file changed, 12 deletions(-)
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 024df59..aa3d1b0
From: Otavio Salvador
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/mxs/clock.c | 46 +++---
arch/arm/include/asm/arch-mxs/clock.h|6 ++--
board/bluegiga/apx4devkit/apx4devkit.c |6 +
The MX23 can only use two SSP ports.
Signed-off-by: Marek Vasut
Cc: Andy Fleming
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
drivers/mmc/mxsmmc.c | 12 +++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
ind
From: Otavio Salvador
This has been copied from Linux source at revision 786f02b719f.
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
arch/arm/include/asm/arch-mxs/iomux-mx23.h | 355
arch/arm/include/asm/arch-mxs/sys_prot
From: Otavio Salvador
This adds the boot mode support for i.MX23 processors.
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 25 +
1 file changed, 25 insertions(+)
diff --git a/arch/arm
From: Otavio Salvador
This adds the base addresses of i.MX23 and easy the detection of wrong
order in board setup, in case no SoC has been set, an error is raised
during build.
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
arch/arm/include/asm/arch-m
Add register definitions for the i.MX23 power control block and
clock control block. These are essential for the basic bootstrap
of the i.MX23. Also, properly include them in imx-regs.h .
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
arch/arm/include/a
Create function which converts SSP bus number to SSP register pointer.
This functionality is reimplemented multiple times in the code, thus
make one common implementation. Moreover, make it a switch(), since the
SSP ports are not mapped in such nice linear fashion on MX23, therefore
having it a swi
Disable SSP2 and SSP3 ports on MX23.
Signed-off-by: Marek Vasut
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Stefano Babic
---
arch/arm/include/asm/arch-mxs/regs-ssp.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h
b/arch/arm/include
From: Otavio Salvador
Add information to identify i.MX23 chips and its known revisions.
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/mxs/mxs.c| 19 ++-
arch/arm/include/asm/arch-mxs/regs-digctl.h
From: Otavio Salvador
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 20
1 file changed, 20 insertions(+)
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
b/arch/arm/cpu/arm926e
From: Otavio Salvador
The memory init is slightly different on MX23, thus split the memory
init for mx23 and mx28 into different functions.
Signed-off-by: Marek Vasut
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 93
From: Otavio Salvador
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
arch/arm/include/asm/arch-mxs/sys_proto.h | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h
b/arch/arm/include/asm/arc
From: Otavio Salvador
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
tools/Makefile |2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/Makefile b/tools/Makefile
index 686840a..c5952fc 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -69,
From: Otavio Salvador
For i.MX23 we need to pass imx23 as elftosb param.
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Marek Vasut
Cc: Stefano Babic
---
Makefile |1 +
arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 18 ++
2 files
From: Otavio Salvador
The MX23 has different handling of the SSP clock and GPMI NAND clock sources,
add necessary quirks into the clock code to properly handle these.
Signed-off-by: Marek Vasut
Signed-off-by: Otavio Salvador
Cc: Fabio Estevam
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/mxs
The power block on MX23 must first be ungated before it can be operated.
Add function to MXS power init that ungates it.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 12
1 file changed, 12 i
This patch adds support for MX23-based Olinuxino board.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
board/olimex/mx23_olinuxino/Makefile | 47 +
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 51 ++
board/olimex/mx23_olinu
Hi Jaehoon / Simon,
Thanks for review comments.
Please find my responses below.
Thanks & Regards
Amarendra Reddy
On 11 January 2013 09:22, Jaehoon Chung wrote:
> On 01/11/2013 12:35 AM, Simon Glass wrote:
> > Hi Amar,
> >
> > On Fri, Jan 4, 2013 at 1:34 AM, Amar wrote:
> >> This API computes
Dear Waibel Georg,
CCing Wolfgang, he's the expert on both IMO.
> Hello,
>
> i'm not sure if this is the right place for this question...however, here
> it is:
>
> i'm using a BDI3000 to program uboot to the flash (Spansion S29GL512P) on a
MPC5200B base board. Erasing / Programming works fine
Dear Tom Rini,
> Hey all,
>
> As a reminder, we're scheduled for v2013.01 on the 15th. I've pushed
> out v2013.01-rc3 now. I still expect:
> - At least one more u-boot-arm PR
> - Any other outstand bug fixes
>
> I saw there was a request for an m68k change to come in from a
> developer, Jason
In case a function argument is known/fixed size array in C, the argument is
still decoyed as pointer instead ( T f(U n[k]) ~= T fn(U *n) ) and therefore
calling sizeof on the function argument will result in the size of the pointer,
not the size of the array.
The VFAT code contains such a bug, thi
Hi Simon / Jaehoon,
Please find my responses below.
Thanks & Regards
Amarendra reddy
On 11 January 2013 11:11, Simon Glass wrote:
> HI Jaehoon,
>
> On Thu, Jan 10, 2013 at 7:54 PM, Jaehoon Chung
> wrote:
> > On 01/11/2013 01:46 AM, Simon Glass wrote:
> >> Hi Amar,
> >>
> >> On Fri, Jan 4, 201
Hi Rajeshwari,
On Fri, Jan 11, 2013 at 2:43 AM, Rajeshwari Birje
wrote:
> Hi Simon,
>
> Thank you for comments.
>
> On Thu, Jan 10, 2013 at 11:04 PM, Simon Glass wrote:
>> Hi Rajeshwari,
>>
>> On Mon, Jan 7, 2013 at 5:08 AM, Rajeshwari Shinde
>> wrote:
>>> This patch converts lowlevel_init.S to
Hi Marek,
On Fri, Jan 11, 2013 at 3:08 AM, Marek Vasut wrote:
> Dear Simon Glass,
>
>> Add a new method for saving that filesystems can implement. This mirrors
>> the existing load method.
>>
>> Signed-off-by: Simon Glass
>
> Reviewed-by: Marek Vasut
>
> btw what about fat write support, can th
Hi Amarendra,
On Fri, Jan 11, 2013 at 5:23 AM, Amarendra Reddy
wrote:
> Hi Jaehoon / Simon,
>
> Thanks for review comments.
> Please find my responses below.
>
> Thanks & Regards
> Amarendra Reddy
>
> On 11 January 2013 09:22, Jaehoon Chung wrote:
>>
>> On 01/11/2013 12:35 AM, Simon Glass wrote:
Hi Amarendra,
On Fri, Jan 11, 2013 at 5:50 AM, Amarendra Reddy
wrote:
> Hi Simon / Jaehoon,
>
> Please find my responses below.
>
> Thanks & Regards
> Amarendra reddy
>
> On 11 January 2013 11:11, Simon Glass wrote:
>>
>> HI Jaehoon,
>>
>> On Thu, Jan 10, 2013 at 7:54 PM, Jaehoon Chung
>> wrote
Hi Vivek,
On Fri, Jan 11, 2013 at 1:24 AM, Vivek Gautam wrote:
> Enabling the non-dt path for the driver so that
> we don't get any build errors for non-dt configuration.
>
> Signed-off-by: Vivek Gautam
Acked-by: Simon Glass
But this has thrown up the issue that the FDT decode is done each
ti
On Fri, Dec 28, 2012 at 02:51:53AM -, Javier Martinez Canillas wrote:
> When booting an IGEPv2 board from NAND with SPL, U-Boot hangs
> trying to read the OMAP General Purpose Memory Controller (GPMC).
>
> The reason is that the GPMC initialization function is called
> inside spl_board_init()
On Wed, Jan 02, 2013 at 07:59:24AM -, Nishanth Menon wrote:
> On clobber, do a cleanup even for SPL build else, we'd have
> MLO.byteswap remaining for certain platforms like am33xx SPL builds
>
> Signed-off-by: Nishanth Menon
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Des
On Mon, Jan 07, 2013 at 01:35:20AM -, Javier Martinez Canillas wrote:
> Some platforms (e.g. IGEPv2 board) has a broken ns16550 UART that
> does not set the TEMT bit when the transmitter is empty in SPL.
> This makes U-Boot to hang while waiting for TEMT to be set.
>
> Add a new option to avo
On Mon, Jan 07, 2013 at 01:35:21AM -, Javier Martinez Canillas wrote:
> IGEP board PC16550D (ns16550) UART doesn't set the
> Transmitter Empty (TEMT) Bit in SPL. This makes
> U-Boot to hang while waiting for TEMT. Add the
> CONFIG_SYS_NS16550_BROKEN_TEMT config option to
> avoid this issue.
>
Am 2012-11-23 23:23, schrieb Angelo Dureghello:
> Fix coldfire serial driver bindings no more relocated to ram after last
> changes to drivers/serial/serial.c (regression).
> Serial initialization in ram has to be called after that gd->reloc_off is
> calculated.
>
> Signed-off-by: Angelo Dureghell
Hello Tom Rini
> Hey all,
>
> As a reminder, we're scheduled for v2013.01 on the 15th. I've pushed
> out v2013.01-rc3 now. I still expect:
> - At least one more u-boot-arm PR
> - Any other outstand bug fixes
>
> I saw there was a request for an m68k change to come in from a
> developer, Jason
This patch changes sdhci_init()'s behavior to NOT enable all interrupt
sources by default. Moreover interrupt signaling has been disabled.
This patch do not enable interrupts which aren't served in u-boot
(they are defined at sdhci.h but NOT used elsewhere):
- SDHCI_INT_CARD_INSERT, SDHCI_INT_CARD
Hi Jaehoon,
> Hi All,
>
> I think this problem is produced when card is running write/erase
> operation. We used the mmc_send_status() into driver/mmc/mmc.c.
> When That command is sending, i found the inhibit released log.
>
> I think problem that SDHCI_DATA_INHIBIT is set at every command.
> i
Hi Wolfgang,
> Dear Lukasz Majewski,
>
> In message <1357665792-8141-1-git-send-email-l.majew...@samsung.com>
> you wrote:
> > I'd like to ask for your opinion about the following problem:
>
> I cannot comment on the problem - only a bit about the proposed patch
> ;-)
>
> > From a brief checkin
Hi,
On Fri, Jan 11, 2013 at 6:26 AM, Simon Glass wrote:
> Hi Marek,
>
> On Fri, Jan 11, 2013 at 3:08 AM, Marek Vasut wrote:
>> Dear Simon Glass,
>>
>>> Add a new method for saving that filesystems can implement. This mirrors
>>> the existing load method.
>>>
>>> Signed-off-by: Simon Glass
>>
>>
Hi Marek,
On Fri, Jan 11, 2013 at 3:10 AM, Marek Vasut wrote:
> Dear Simon Glass,
>
>> With fewer #ifdefs the code is more readable and more of the code is
>> compiled for all boards. Add defines in the header file to control
>> what features are enabled, and then use if() instead of #ifdef.
>>
>
Hi Simon,
On Fri, Jan 11, 2013 at 7:52 AM, Simon Glass wrote:
> Hi Jagannadha
>
> On Thu, Jan 3, 2013 at 6:51 AM, Jagannadha Sutradharudu Teki
> wrote:
>> This patch provides support to read a flash status register.
>>
>> Status register contains a control bits used to verify
>> the progress of
Hi Jagan,
On Fri, Jan 11, 2013 at 7:51 AM, Jagan Teki wrote:
> Hi Simon,
>
> On Fri, Jan 11, 2013 at 7:52 AM, Simon Glass wrote:
>> Hi Jagannadha
>>
>> On Thu, Jan 3, 2013 at 6:51 AM, Jagannadha Sutradharudu Teki
>> wrote:
>>> This patch provides support to read a flash status register.
>>>
>>>
Hello,
we want to use the marvell 88f6282 SoC in our products. For evaluation we
use the cogent1724 board [1].
Does anyone have experience with the cogent csb1724 board [1] and the
marvell 88f6282?
I've searched the mainline u-boot sources, but found no config for the
88f6282.
Is it possible to bu
Hello,
We are using an in-house Power PC board with MPC8555E processor.We are
currently developing drivers for USB on bare board(Non-RTOS).
We would like your inputs regarding the implementation of usb driver.My
reference is uboot and
linux.
We are implementing usb support for the first time and
Hi Tom,
On Thu, 10 Jan 2013 17:59:45 -0700, Tom Rini wrote:
> Hello,
>
> The following changes since commit 612404c28a64a6df300642a1550a65dcc8e01f82:
>
> Merge 'u-boot-atmel/master' into 'u-boot-arm/master' (2013-01-09 20:01:48
> +0100)
>
> are available in the git repository at:
>
>
>
Hi Simon,
Thanks for review comments.
Please find my responses below.
Thanks & Regards
Amarendra Reddy
On 10 January 2013 22:27, Simon Glass wrote:
> Hi Amar,
>
> On Fri, Jan 4, 2013 at 1:34 AM, Amar wrote:
> > This patch enables and initialises DWMMC for SMDK5250.
> > Supports both FDT and n
Turn on SPI in cardhu config file
Signed-off-by: Allen Martin
---
include/configs/cardhu.h | 11 +++
1 file changed, 11 insertions(+)
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index aa725ba..1616b39 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/car
Add apbdma node for tegra20 and tegra30, copied directly from tegra
Linux dtsi files.
Signed-off-by: Allen Martin
---
arch/arm/dts/tegra20.dtsi | 21 +
arch/arm/dts/tegra30.dtsi | 37 +
2 files changed, 58 insertions(+)
diff --git a/ar
Add driver for tegra SPI "SLINK" style driver. This controller is
similar to the tegra20 SPI "SFLASH" controller. The difference is
that the SLINK controller is a genernal purpose SPI controller and the
SFLASH controller is special purpose and can only talk to FLASH
devices. In addition there ar
Add tegra30 SPI SLINK nodes to fdt.
Signed-off-by: Allen Martin
---
arch/arm/dts/tegra30.dtsi | 77 +
include/fdtdec.h |1 +
lib/fdtdec.c |1 +
3 files changed, 79 insertions(+)
diff --git a/arch/arm/dts/tegra30.dtsi b/
SBC1 is SPI controller 1 on tegra30
Signed-off-by: Allen Martin
---
arch/arm/cpu/tegra30-common/clock.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/tegra30-common/clock.c
b/arch/arm/cpu/tegra30-common/clock.c
index c67a2e1..db5ac1e 100644
--- a/arch/arm/c
This series updates the tegra20 SPI driver to add fdt support and adds
a new tegra30 SPI driver. This series depends on the following
patches:
Allen Martin:
fdt: fix dts preprocessor options
tegra: remove IRDA pinmux synonym
Testing was done on seaboard (tegra20) and cardhu (tegr
Add I/O addresses of SPI SLINK controllers 1-6
Signed-off-by: Allen Martin
---
arch/arm/include/asm/arch-tegra/tegra.h |6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h
b/arch/arm/include/asm/arch-tegra/tegra.h
index 67e6fd0..d2435c1 100644
---
Add support for configuring tegra SPI driver from devicetree.
Support is keyed off CONFIG_OF_CONTROL. Add entry in seaboard dts
file for spi controller to describe seaboard spi.
Signed-off-by: Allen Martin
---
arch/arm/dts/tegra20.dtsi | 13 +
drivers/spi/tegra_spi.c | 42
On 01/11/2013 02:46:06 AM, Dimitar Penev wrote:
Hi Scott,
On 01/10/2013 01:56:30 AM, Dimitar Penev wrote:
Hello,
First of all sorry if this question was already answered here.
We are sourcing some K9F8G08U0M-PIB0 NAND flash devices.
On the first erase in uboot 2011.09 I got bunch of mostly
if traditionally used boot.scr is not found see if uEnv.txt
is available to load environment. uenvcmd is executed after load
of uEnv.txt if it is defined in the environment text file
Signed-off-by: Nishanth Menon
---
include/configs/omap4_common.h | 12
1 file changed, 12 insertio
On 14:39-20130111, Nishanth Menon wrote:
> if traditionally used boot.scr is not found see if uEnv.txt
> is available to load environment. uenvcmd is executed after load
> of uEnv.txt if it is defined in the environment text file
>
> Signed-off-by: Nishanth Menon
> ---
Hi Marek,
On Fri, Jan 11, 2013 at 11:19 AM, Marek Vasut wrote:
> This patch adds support for MX23-based Olinuxino board.
>
> Signed-off-by: Marek Vasut
> Cc: Fabio Estevam
> Cc: Otavio Salvador
> Cc: Stefano Babic
> ---
> board/olimex/mx23_olinuxino/Makefile | 47 +
> board
On Mon, Jan 7, 2013 at 7:51 AM, Javier Martinez Canillas
wrote:
> For production systems it is better to use script images since
> they are protected by checksums and carry valuable information like
> name and timestamp. Also, you can't validate the content passed to
> env import.
>
> But for deve
Hi Minkyu,
On Fri, 11 Jan 2013 17:23:10 +0900, Minkyu Kang
wrote:
> Dear Albert,
>
> Merge samsung, imx, tegra into u-boot-arm/master (2012-12-22 11:59:14 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-samsung master
>
> for you to fetch changes up to a
Hello Tom,
The following changes since commit
61bdb9133593f0f881a57232039296f64bd662ed:
arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
for you to fetch changes up to 59ee45ee91cc91b392a8e
On 10/28/2012 4:48 AM, Stefano Babic wrote:
On 23/10/2012 03:19, Troy Kisky wrote:
Use a common watchdog driver for all these cpus.
Signed-off-by: Troy Kisky
---
v2: add README.watchdog
include mx31/mx35 watchdogs
move to drivers/watchdog
v3: change drivers/watchdog/M
This patch adds support for MX23-based Olinuxino board.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
MAINTAINERS |1 +
board/olimex/mx23_olinuxino/Makefile | 47 +
board/olimex/mx23_olinuxino/mx23
Dear Fabio Estevam,
> Hi Marek,
>
> On Fri, Jan 11, 2013 at 11:19 AM, Marek Vasut wrote:
> > This patch adds support for MX23-based Olinuxino board.
> >
> > Signed-off-by: Marek Vasut
> > Cc: Fabio Estevam
> > Cc: Otavio Salvador
> > Cc: Stefano Babic
> > ---
> >
> > board/olimex/mx23_oli
Replace use of ttyAM0 with ttyAMA0 as default serial console.
Signed-off-by: Marek Vasut
Cc: Stefano Babic
---
include/configs/m28evk.h |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 6887171..d34e970 100644
--- a/
On Fri, Jan 11, 2013 at 10:36:06PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 61bdb9133593f0f881a57232039296f64bd662ed:
>
> arm: remove useless code in start.S files (2013-01-08 22:14:54 +0100)
>
> are available in the git repository at:
>
> git://gi
On Fri, Jan 11, 2013 at 03:45:26PM +0100, Jens Scharsig wrote:
> Am 2012-11-23 23:23, schrieb Angelo Dureghello:
> > Fix coldfire serial driver bindings no more relocated to ram after last
> > changes to drivers/serial/serial.c (regression).
> > Serial initialization in ram has to be called after t
On 01/11/2013 11:44 AM, Allen Martin wrote:
> Add apbdma node for tegra20 and tegra30, copied directly from tegra
> Linux dtsi files.
> diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
> + apbdma: dma {
> + compatible = "nvidia,tegra20-apbdma";
> + re
On 01/11/2013 11:44 AM, Allen Martin wrote:
> Add support for configuring tegra SPI driver from devicetree.
> Support is keyed off CONFIG_OF_CONTROL. Add entry in seaboard dts
> file for spi controller to describe seaboard spi.
> diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
1 - 100 of 109 matches
Mail list logo
