Dear Waibel Georg, CCing Wolfgang, he's the expert on both IMO.
> Hello, > > i'm not sure if this is the right place for this question...however, here > it is: > > i'm using a BDI3000 to program uboot to the flash (Spansion S29GL512P) on a MPC5200B base board. Erasing / Programming works fine as long as the flash sectors are not protected (via PPB bit). On a protected sector the erase command fails (what makes sense). I thought I can use the unlock command to unprotect the sectors, but this command seems not to work: > > unlock 0xfff00000 1000 > > Unlocking flash at 0xfff00000 > # Invalid parameter for flash programming > > Any ideas what I'm doing wrong? > > Flash configuration: > [FLASH] > CHIPTYPE MIRRORX16 > CHIPSIZE 0x04000000 > BUSWIDTH 16 > WORKSPACE 0x00000000 > > Regards > Georg Waibel Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
