Thank you all for taking this over the finish line. I
Duncan Hare
714 931 7952DRE# 01350926
On Monday, November 28, 2022 at 11:52:23 AM PST, Tom Rini
wrote:
On Tue, Nov 08, 2022 at 02:17:28PM +0800, Ying-Chun Liu (PaulLiu) wrote:
> From: "Ying-Chun Liu (PaulLiu)"
&
transfers are done using tftp or NFS both
>> > over udp. This requires a request to be sent from client
>> > (u-boot) to the boot server.
>> >
>> > The current standard is TCP with selective acknowledgment.
>> >
>> > Signed-off-by: Duncan Hare
&
Duncan Hare
714 931 7952
>On Sun, Jun 24, 2018 at 5:40 PM, wrote:.
>From: Duncan Hare >
>> To make it possible to add TCP versions of the same, while reusing
>> IP portions. This patch should not change any behavior.
>>
>> All references to TCP removed
>> Used most recent version
Thanks to all.
My problem was I'd installed bison++, not bison. Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
9
Makefile:492: recipe for target 'menuconfig' failed
make: *** [menuconfig] Error 2
Where are we on this? Is there a fix?
Thanks
Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
>From: Karsten Merker
>To: Duncan Hare
>Cc: U-Boot Mailing List
>Sent: Wednesday, June 20, 2018 2:16 PM
>Subject: Re: Make Menuconfig Error
>
>On Wed, Jun 20, 2018 at 12:33:45AM +, Duncan Hare wrote:
>
>> Makefile:491: recipe for target 'menuconf
Makefile.lib:228: recipe for target 'scripts/kconfig/zconf.tab.c' failed
make[1]: *** [scripts/kconfig/zconf.tab.c] Error 139
Makefile:491: recipe for target 'menuconfig' failed
make: *** [menuconfig] Error 2
root@debian:/home/duncan/archive/u-boot# Duncan Hare
714 931 7952
___
From: Karsten Merker
To: Duncan Hare
Cc: U-Boot Mailing List
Sent: Monday, June 18, 2018 11:43 AM
Subject: Re: [U-Boot] Fw: make config Error
>
> In this repository. It might exist elsewhere.
>
> I generally use raspbian to compile u-boot for the raspberry
> pi,
From: Joe Hershberger
To: Duncan Hare
Cc: Simon Glass ; Joe Hershberger ;
u-boot
Sent: Friday, June 15, 2018 12:54 PM
Subject: Re: [U-Boot] make config Error
On Fri, Jun 15, 2018 at 10:56 AM, wrote:
> installed bison++
I just "sudo apt-get install flex bison" and it
. I believe it should be implemented in the driver.
Putting it in in the app code leads to confusionas to its purpose. Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
What's the correct format for this header?
Patman is complaining about the SPDX header.
Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon
I have forgotten how to override the on errors do not sent patchesoption.
tools/patman/patman -c3 -?
What's the "?"
Thanks
Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Simon
Is this is problem?
arch/arm/dts/bcm2835-rpi-a-plus.dtb: Warning (phys_property): Missing
property '#phy-cells' in node /phy or bad phandle (referred
from /soc/usb@7e98:phys[0])
repeated about 6 - 8 times
make[2]:'arch/arm/dts/bcm2837-rpi-3-b.dtb' is up to date.
__
From: Simon Glass
To: Duncan Hare
Cc: "joe.hershber...@ni.com" ; U-Boot Mailing List
Sent: Sunday, May 13, 2018 3:00 PM
Subject: Re: net: [U-Boot] [PATCH v10 3/3] Adding wget
>>>>
>>>>Please setup a test that can run in an environment without the
>>
>>Please setup a test that can run in an environment without the
>>Internet. That is critical for unit tests.
>>
>>Hand tests for Internet usage and the environmental effects are great,
>>but that can't be what we include in the auto tests for repeat-ability
>>reasons. Simon is asking for a s
From: Simon Glass
To: Duncan Hare
Cc: Wolfgang Denk ; U-Boot Mailing List ;
Joe Hershberger
Sent: Wednesday, April 25, 2018 4:44 PM
Subject: Re: [PATCH v10 3/3] Adding wget
Hi Duncan,
On 25 April 2018 at 08:33, Duncan Hare wrote:
>> From: Simon Glass
From: Simon Glass
To: Duncan Hare
Cc: U-Boot Mailing List ; Joe Hershberger
Sent: Tuesday, April 24, 2018 10:01 PM
Subject: Re: [PATCH v10 3/3] Adding wget
Hi Duncan,
On 22 April 2018 at 21:22, Duncan Hare wrote:
>
>>The server can be tested with the wget command which
>From: Simon Glass
>To: Duncan Hare
>Sent: Sunday, April 22, 2018 1:10 PM
>Subject: Re: [PATCH v10 3/3] Adding wget
>
>Hi Duncan,
>On 17 April 2018 at 15:58, Duncan Hare wrote:
>> From: Simon Glass
>> It has been through patman, and the only e
From: Simon Glass
To: Duncan Hare
Cc: Joe Hershberger ; U-Boot Mailing List
Sent: Sunday, April 22, 2018 1:15 PM
Subject: Re: Network Packet Buffers: raspberrypi: variable uchar
*net_rx_packets[PKTBUFSRX] in net/net.c
Hi Duncan,
>On 17 April 2018 at 12:59, Duncan Hare wr
Hi Duncan,
On 14 April 2018 at 17:43, wrote:
>> From: Duncan Hare
>>
> Why http and wget:
>> END
Why END?
Don't know. will delete.
>
> Signed-off-by: Duncan Hare
> ---
>
> Changes in v10: None
There is no change log here. Has nothing changed si
pool a
part of the u-boot image?
Thanks
Duncan Hare
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Chris Packham ; Tom Rini
; Maxime Ripard ; Joe
Hershberger
Sent: Friday, April 13, 2018 1:28 PM
Subject: [PATCH v2 03/11] net: Move net command options to the cmd menu
Options
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 3/9] net: Move the DHCP command below the BOOTP command
Move DHCP to directly
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 5/9] net: Add the BOOTP_DNS2 option to Kconfig
Commit 3b3ea2c56ec4bc5 ("Kc
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 6/9] net: Improve BOOTP PXE config option
Improve the documentation and correct
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 7/9] net: Make the BOOTP options default
The BOOTP options used to be and
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 8/9] net: Make core net code depend on NET instead of CMD_NET
No commands are
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 9/9] Revert "Kconfig: cmd: Make networking command dependent
on NET"
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 1/9] net: Make CMD_NET a menuconfig
Previously, CMD_NET was an alias for 2
From: Joe Hershberger
To: u-boot@lists.denx.de
Cc: Heinrich ; Michal Simek
; Simon Glass ; Duncan Hare
; Tom Rini ; Maxime Ripard
; Joe Hershberger
Sent: Wednesday, March 28, 2018 1:53 PM
Subject: [PATCH 0/9] net: Clean up the menus and dependencies among commands
and options
There
Begin forwarded message:
Date: Mon, 19 Mar 2018 14:57:59 -0700
From: Duncan Hare
To: Duncan Hare
Subject: Re: [U-Boot] dhcp command not populating dnsip environment
variable
> >On Sun, Mar 18, 2018 at 3:01 PM, Duncan Hare wrote:
> > Cause: u-boot/Kconfig DISTRO_DEFAULTS missi
On Mon, 19 Mar 2018 09:53:24 +
Calvin Johnson wrote:
>
> > > > void net_set_udp_header(uchar *pkt, struct in_addr dest, int
> > > > dport,
> > > > - int sport, int len);
> > > > -
> > > > + int sport, int len);
> > >
> > Why do you need
On Sat, 17 Mar 2018 16:36:14 +
Calvin Johnson wrote:
> It would be good to have this cosmetic change into a separate patch.
Ok. But at this stage I'm at the "Forgive me Lord for I know not what
I do"
> IMO, better place for this definition and associated explanation
> would be above the c
Cause: u-boot/Kconfig DISTRO_DEFAULTS missing variables in Kconfig files
u-boot/ config DISTRO_DEFAULTS contains these directives:
select HUSH_PARSER
select BOOTP_BOOTPATH if NET && CMD_NET
select BOOTP_DNS if NET && CMD_NET
select BOOTP_GATEWAY if NET && CMD_NET
On Thu, Mar 15, 2018 at 3:25 PM, Duncan Hare wrote:
> In the latest version of u-boot, the dhcp command appears not to
> populate the environment variable dnsip. This used to be the behaviour.
___
The bootp.c code was changed with the addit
From: Joe Hershberger
To: Duncan Hare
Cc: u-boot ; Joe Hershberger
Sent: Thursday, March 15, 2018 1:29 PM
Subject: Re: [U-Boot] dhcp command not populating dnsip environment variable
On Thu, Mar 15, 2018 at 3:25 PM, Duncan Hare wrote:
> In the latest version of u-boot, the d
In the latest version of u-boot, the dhcp command appears not to
populate the environment variable dnsip. This used to be the behaviour.
The dns command works, if dnsip is populated manually.
Is the a Kconfig variable controlling this? Or is there a new
environment variable?
Thanks
Duncan Hare
value either left arrow, or
backspace.
Is the edit function now changed?
Thanks
Duncan Hare
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
configuration incorrect?
How can I make it do what was the default behavior?
If it is an enhancement, It's not very user friendly. It makes IBM's
VM/370 edit command look positively useful.
Thanks
Duncan Hare (d...@synoia.com)
___
U-Boot mailing l
.
u-boot reports the usb command is unknown.
Thanks
Duncan Hare
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Mon, 12 Feb 2018 13:35:11 -0600
Joe Hershberger wrote:
> >> >>
> >> >> > I need to determine if it
> >> >> > uses CONFIG_SYS_RX_ETH_BUFFER" from net.h and the
> >> >> > "net_rx_packets" buffer pool defined in net/net.c
> >> >> >
> >> >
> >> > Two solutions:
> >> >
> >> > Option 1.
> >> >
On Sun, 11 Feb 2018 00:39:05 + (UTC)
Duncan Hare wrote:
> Duncan Hare
>
> 714 931 7952
>
>
> - Forwarded Message -
> From: Joe Hershberger
> To: Duncan Hare
> Cc: Joe Hershberger ; u-boot
> Sent: Friday, February 9, 2018 1:11 PM
> Sub
On Thu, 8 Feb 2018 22:15:44 + (UTC)
Duncan Hare wrote:
> Duncan Hare
>
> 714 931 7952
>
>
> - Forwarded Message -
> From: Joe Hershberger
> To: Duncan Hare
> Cc: u-boot ; Joe Hershberger
> Sent: Thursday, February 8, 2018 11:40 A
/tsi108_eth.c
drivers/net/mpc8xx_fec.c
drivers/net/at91_emac.c
drivers/net/ethoc.c
drivers/net/fsl_mcdmafec.c
drivers/net/bcm-sf2-eth.c
drivers/net/enc28j60.c
drivers/net/smc9.c
drivers/net/macb.c
drivers/net/pic32_eth.c
Thanks
Duncan Hare
___
U
ude each kernel module.
Tedious? yes. Coding? No. Testing? Yes but less than new code.
Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
This is the TCP and Kconfig files for introducing TCP and wget
into u-boot.
All the code is new, and not copied from any source.
Makefile in the net directory is modified by hand. It appears not to be
generated by Kconfig.
Signed-off-by: Duncan Hare
---
net/Makefile | 3 +-
net/tcp.c
> The patch is trying to put everything into net.c. This is a mess and
> not where we should head to.
Not at all. I tried that and it was correctly rejected. The TCP
functions are in tcp.c, and the wget functions in wget.c
There is no socket. There is no socket analogue. There is no
widespread c
.
Signed-off-by: Duncan Hare
---
include/net.h | 32 ++
net/Kconfig | 5 +++
net/net.c | 102 +++---
net/ping.c| 9 ++
4 files changed, 115 insertions(+), 33 deletions(-)
diff --git a/include/net.h b/include
From: Heinrich Schuchardt
To: Duncan Hare ; Alexander Graf
Subject: Re: [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing
booting via iSCSI
On 01/25/2018 08:39 PM, Duncan Hare wrote:
>>> - Forwarded Message -
>>> From: Alexander Graf
>>&g
> - Forwarded Message -
> From: Alexander Graf
> To: Heinrich Schuchardt
> > The appended README explains how U-Boot and iPXE can be used
> > to boot a diskless system from an iSCSI SAN.
> >
> > The maintainer for README.efi and README.iscsi is set.
> >
> > Signed-off-by: Heinrich Sch
Hi Duncan,
On Wed, Jan 10, 2018 at 8:18 PM, Duncan Hare wrote:
> Date: Wed, 10 Jan 2018 17:54:07 -0800
> Subject: [PATCH] git_msg_1
>
> TCP and wget implementation.
Sounds like this should be the title of the series cover letter. I
thought we agreed that this should be sent
.
Signed-off-by: Duncan Hare
From: Duncan Hare
Date: Wed, 10 Jan 2018 17:54:07 -0800
Subject: [PATCH] git_msg_1
Signed-off-by: Duncan Hare
---
include/net.h | 32 ++
net/Kconfig | 5 +++
net/net.c | 102 +++---
net
> >
> > A note on this TCP implementation. In TCP the transmitting TCP
> > guarantees delivery of a stream, and the receiving TCP guarantees
> > ordered of delivery of the stream. In this implementation The
> > kernel memory buffer and the TCP sequence number is used to order
> > the stream. for th
> >>>selects the LIB_RAND feature since it is required.
> >
> > Thanks: will be in u-boot/cmd/Kconfig
> >
> >>Are we lookin at a series of patches, or a concurrent set?
> >
> > At this time a series of three, but I'd take advice on the preferred
> > procedure.
>
> Remember that the goal is
>>selects the LIB_RAND feature since it is required.
Thanks: will be in u-boot/cmd/Kconfig
>Are we lookin at a series of patches, or a concurrent set?
At this time a series of three, but I'd take advice on the preferred
procedure.
(1)
cmd/Kconfig
cmd/net.c
net/Kconfig
net/net.c
net/ping.c
From: Jagan Teki
On Wed, Dec 20, 2017 at 11:22 PM, Duncan Hare wrote:
>> An observation: The Banana PI boards, allwinner based, I've use have a
>> boot.scr file on the fat partition to direct booting.
>> A Suggestion: If this is widespread, the memory used by the u-
as an observation and suggestion. It may have no merit. Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
t file transfer is a poor fit for UDP.
We we lookin at a series of patches, or a concurrent set? The
previous patch include all the pvarius change for setting up
integration into u-boot. This patch standing by itself cannot
be integrated. At a minimun it needs the slightly changed
vers
The changes in u-boot to implement this were sent Nov 8, and
I've see no mention of it, in the mailing list.
What's the next step?
Thanks
Duncan Hare d...@synoia.com
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
hitectures was
curtailed, or delayed, by having gateways, in IP's case NAT gateways,
in IBM's SNA it was SNI - SNA Network Interconnect.
Because of the extensive use of gateways, the risk of a device's mac address
being braodcast to, is hopefully,limited by the gateway. If it is not then
efore saving
the environment.
This forces the board code the load the actual hardware address, if there is
one, into the environment at start time.
Otherwise you will always boot with the Ethernet address from the first time
the environment was saved.
Which make the environment not por
are about 4x network latency plus data transit time.
In tests this reduces kernel trnasfer time from about 15 to 20 seconds
with tftp on a raspberry pi to about 0.4 seconds with wget.
The raspberry pi as a sink for the kernel runs at about 10 Mbits/sec.
Signed-off-by: Duncan Hare
---
cmd
Previous I've added these two definitions to use u-boot witht he
raspberry pi, into include/configs/rpi.h
#define CONFIG_SYS_MAXARGS 32 /* dch doubled from 16 */
#define CONFIG_SYS_BARGSIZE 1540 /* dch added, default 512 */
However on the most recent master,
sing" of variables in the packet-in calls to wget. This requires
advice on the best implementation.
Kconfig is used in ./cmd and ./net to control wget and tcp respectively.
Makefile in ./net appears to have to be configured by hand.
Duncan Hare
.
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
This code is written. and has changes to the following files:
I sent an "atomic patch", and it got stuck in moderation because it is
350k+, that is too big.
My rules to myself were:
All interfaces, function calls, to be preserved. However, This results
in an ugly "re-purposing" of variables
r registration purposes.
Signed-off-by: Duncan Hare
---
cmd/Kconfig | 5 +
cmd/net.c | 13 +
include/net.h | 241 +++-
net/Kconfig | 5 +
net/Makefile | 2 +-
net/net.c | 871 ++
net/ping.c | 9 +-
net/w
Get the following message from running tools/patman/pathan.py
git: 'send-email' is not a git command. See 'git --help'.
What do I need to do? Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
I pulled the latest master from git clone git://git.denx.de/u-boot.gitbuilt the
raspberry pi imagemake r_3_32b_defconfigmakecopied the u-boot bin the a working
sd cardand I get the rainbow screen of death from the pi.
When I use a u-boot.bin build from a git clone of u-boot in about Jan 2017, it
make menuconfig
HOSTCC scripts/kconfig/mconf.o
In file included from scripts/kconfig/mconf.c:23:0:
scripts/kconfig/lxdialog/dialog.h:26:20: fatal error: curses.h: No such file or
directory
#include CURSES_LOC
Appears CURSES_LOC is undefined.
Thanks.
Duncan Hare
714 931 7952
from Linux Monitor (LiMon) - Networking.
*
* Copyright 1994 - 2000 Neil Russell.
* (See License)
* Copyright 2000 Roland Borde
* Copyright 2000 Paolo Scaffardi
* Copyright 2000-2002 Wolfgang Denk, w...@denx.de
* Copyright 2017-2018 Duncan Hare, d...@synoia.com
*
ows
code being written now, with packet in and packet out the intersection
of the new code and existing code.
I can transferr small files.
UDP function is not affected, and still works.
Thanks
Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@list
network?
Thanks
Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
vents
populating u-boot in the new device from getting the correct MAC address for
the device.
Is there a reason for protecting the MAC address variable in this manner? Or
should the code be to alwys retrieve the MAC address from the device? For
example:
setenv("ethaddr",ge
0701, win 7356, options [nop,nop,TS val 4294956923 ecr
215895745], length 0
Can the NFS command be enhanced to use TCP?
TCP open source code exists in linux.kernel.org, the "net" directory. Duncan
Hare
714 931 7952
___
U-Boot m
op,nop,TS val 4294956923 ecr
215895745], length 0
Can the NFS command be enhanced to use TCP?
TCP open source code exists in linux.kernel.org, the "net" directory. Duncan
Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
if I may so so)
Can we get a DNS lookup command to resolved names after the initial DHCP IP
address setup.
This is to get a flexible mechanism to set a bootserver address, consistent for
Uboot across DHCP implementations. Duncan Hare
714 931 7952
___
Banana Pi BPI-M2 Ultra is a quad-core mini single board computer built with
Allwinner R40 SoC. It features 2GB of RAM and 8GB eMMC. Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
2A DC power-supply Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Please could you let me know the correct config command for the Intekl NUC
version of u-boot.
Thanks Duncan Hare
714 931 7952
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
80 matches
Mail list logo
