On 6/5/24 08:36, Heinrich Schuchardt wrote:
On 5/31/24 15:50, Caleb Connolly wrote:
Add a tool that can generate GUIDs that match those generated internally
by U-Boot for capsule update fw_images.
Dynamic UUIDs in U-Boot work by taking a namespace UUID and hashing it
with the board model, compa
On 5/31/24 15:50, Caleb Connolly wrote:
Add a tool that can generate GUIDs that match those generated internally
by U-Boot for capsule update fw_images.
Dynamic UUIDs in U-Boot work by taking a namespace UUID and hashing it
with the board model, compatible, and fw_image name.
This tool accepts
On 5/31/24 15:50, Caleb Connolly wrote:
As more boards adopt support for the EFI CapsuleUpdate mechanism, there
is a growing issue of being able to target updates to them properly. The
current mechanism of hardcoding UUIDs for each board at compile time is
unsustainable, and maintaining lists of
Hi Heinrich
On Wed, 5 Jun 2024 at 07:09, Heinrich Schuchardt wrote:
>
> On 6/5/24 05:25, Simon Glass wrote:
> > It does not make sense to enable all SHA algorithms unless they are
> > needed. It bloats the code and in this case, causes chromebook_link to
> > fail to build.
>
> Why would chromeboo
On 5/31/24 15:50, Caleb Connolly wrote:
Introduce a new helper efi_capsule_update_info_gen_ids() which populates
the capsule update fw images image_type_id field. This allows for
determinstic UUIDs to be used that can scale to a large number of
different boards and board variants without the need
On 5/31/24 15:50, Caleb Connolly wrote:
Add support for generating version 5 UUIDs, these are determistic and work
by hashing a "namespace" UUID together with some unique data. One intended
usecase is to allow for dynamically generate payload UUIDs for UEFI
capsule updates, so that supported boar
Hi Simon,
On Wed, 5 Jun 2024 at 06:26, Simon Glass wrote:
>
> On some boards, the bloblist is created in SPL once SDRAM is ready. It
> cannot be accessed until that point, so is not available early in SPL.
>
> Add a condition to avoid a hang in this case.
>
> This fixes a hang in chromebook_coral
Hi Caleb,
On Mon, 3 Jun 2024 at 18:19, Caleb Connolly wrote:
>
> Hook up support for capsule updates loaded from disk on Qualcomm
> platforms.
>
> Most Qualcomm devices have an A/B partition layout, with most partitions
> duplicated. The metadata on which slot is active is stored in the GPT
> hea
Hi Caleb,
On Mon, 3 Jun 2024 at 18:19, Caleb Connolly wrote:
>
> Qualcomm boards flash U-Boot to the boot partition, implement support
> for determining which slot U-Boot is running from and finding the
> correct boot partition for that slot and configuring the appropriate DFU
> string.
>
> For n
On 6/5/24 05:25, Simon Glass wrote:
It does not make sense to enable all SHA algorithms unless they are
needed. It bloats the code and in this case, causes chromebook_link to
fail to build.
Why would chromebook_link fail to build?
Is TPM used by U-Boot on that board at all?
Add a condition t
Hi Neil,
On 28/05/24 14:06, Neil Armstrong wrote:
The link_startup_again logic was added in Linux to handle device
that were set in LinkDown state, which should not be the case since U-boot
doesn't set LinkDown state are init, and Linux sets the device active
s/are/at ?
in ufshcd_init() for
This is a partial revert which makes boneblack_vboot boot again.
This reverts commit f4b64e9736e73ceec14d51600bed9a8ac48f9fe8.
Signed-off-by: Simon Glass
---
configs/am335x_boneblack_vboot_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/configs/am335x_boneblack_vboot_defconfig
b/
A recent change introduced a bug whereby a PMIC device is used in
place of the regulator device. Fix it.
This fixes a hang after 'Loading Environment from nowhere... OK'
on chromebook_jerry
Fixes: f047e4ab976 ("regulator: rk8xx: add indirection level for some..")
Signed-off-by: Simon Glass
---
This causes a hang, so disable it.
Fixes: 6d8cdfd1536 ("rockchip: spl: Enable caches to speed up checksum
validation")
Signed-off-by: Simon Glass
---
configs/chromebook_bob_defconfig | 1 +
configs/chromebook_kevin_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/chro
The dcache may not be enabled in SPL. Add a check to avoid trying to
use an undefined function.
Signed-off-by: Simon Glass
---
common/spl/spl_atf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/common/spl/spl_atf.c b/common/spl/spl_atf.c
index 3bdd013a35f..9afe6456bc4 10
On some boards, the bloblist is created in SPL once SDRAM is ready. It
cannot be accessed until that point, so is not available early in SPL.
Add a condition to avoid a hang in this case.
This fixes a hang in chromebook_coral
Fixes: 70fe2385943 ("fdt: Allow the devicetree to come from a bloblist
With a recent change, regulators_enable_boot_on() returns an error if a
regulator is already set. Check for and handle this situation.
Fixes: d99fb64a98a power: regulator: Only run autoset once for each regulator
Signed-off-by: Simon Glass
---
drivers/power/regulator/regulator-uclass.c | 2 +-
Add better logging for power init so that CONFIG_LOG_ERROR_RETURN can
be enabled.
Signed-off-by: Simon Glass
---
board/google/veyron/veyron.c | 27 ---
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/board/google/veyron/veyron.c b/board/google/veyron/veyr
It does not make sense to enable all SHA algorithms unless they are
needed. It bloats the code and in this case, causes chromebook_link to
fail to build.
Add a condition to TPM to correct this. Note that the original commit
combines refactoring and new features, which makes it hard to see what
is
This cannot be enabled early in boot since some other init is needed.
At this point it is unclear exactly what init is needed, so disable
the debug UART to avoid a hang.
Signed-off-by: Simon Glass
---
configs/nyan-big_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/configs/nyan-big
This series includes fixes to get some rockchip and nvidia boards
working again. It also provides a fix (revert) for Beaglebone Black and
a devicetree fix for coral (x86).
Simon Glass (9):
nvidia: nyan-big: Disable debug UART
tpm: Avoid code bloat when not using EFI_TCG2_PROTOCOL
rockchip:
On 2024/6/5 06:53, jianqiang wang wrote:
Hi Das U-Boot developers,
...
2. in file fs/erofs/data.c, function z_erofs_read_one_data, the node
data is read from the storage, however, without a proper check, the
data can be corrupted. For example, the inode data is used in function
z_erofs_r
On Tue, 4 Jun 2024 at 10:16, Brandon Maier wrote:
>
> The method `ConfigParser.readfp()` is marked deprecated[1].
>
> In Python 3.12 this method have been removed, so replace it with
> `ConfigParser.read_file()`.
>
> [1]
> https://docs.python.org/3.11/library/configparser.html#configparser.Config
Hi Brandon,
On Tue, 4 Jun 2024 at 10:16, Brandon Maier wrote:
>
> The method `ConfigParser.readfp()` is marked deprecated[1].
>
> In Python 3.12 this method have been removed, so replace it with
> `ConfigParser.read_file()`.
>
> [1]
> https://docs.python.org/3.11/library/configparser.html#config
On Tue, 4 Jun 2024 at 10:16, Brandon Maier wrote:
>
> The methods `unittest.assertEquals()` and
> `unittest.assertRegexpMatches()` are marked deprecated[1].
>
> In Python 3.12 these aliases have been removed, so do a sed to replace
> them with their new names.
>
> [1] https://docs.python.org/3.11/
On Tue, 4 Jun 2024 at 10:31, Brandon Maier wrote:
>
> Installing patman with `cd ./tools/patman && pip install -e .` fails
> with the error below.
>
> As described in the error output, the license line is not allowed to be
> only defined in the setup.py.
>
> > $ cd ./tools/patman && pip install -e
Hi Sam,
On Tue, 4 Jun 2024 at 13:53, Sam Povilus wrote:
>
> Sam Povilus (2):
> doc: Remove extraneous curly braces
> doc: add clarity to what a "fpga" image is
>
> doc/usage/fit/source_file_format.rst | 28 ++--
> 1 file changed, 14 insertions(+), 14 deletions(-)
Thi
Hi Alexey,
On Mon, Jun 3, 2024, 09:57 Alexey Romanov
wrote:
> Hello!
>
> This series adds support for the mtdblock device, which
> allows to read/write data block by block. For example,
> it can now be used for BCB or Android AB command:
>
> $ bcb load mtd 0 part_name
>
> Tested only on SPI NA
Hi Caleb,
On Fri, 31 May 2024 at 07:50, Caleb Connolly wrote:
>
> Add support for generating version 5 UUIDs, these are determistic and work
spelling
> by hashing a "namespace" UUID together with some unique data. One intended
> usecase is to allow for dynamically generate payload UUIDs for UEF
Hi Caleb,
On Fri, 31 May 2024 at 07:50, Caleb Connolly wrote:
>
> Add a tool that can generate GUIDs that match those generated internally
> by U-Boot for capsule update fw_images.
>
> Dynamic UUIDs in U-Boot work by taking a namespace UUID and hashing it
> with the board model, compatible, and f
Am 5. Juni 2024 03:37:40 MESZ schrieb Tom Rini :
>The BLK symbol is used both for "we have a block device subsystem
>enabled" and "we need to utilize the block device library functions". In
>the case of efi_loader, it is the case of "we need to utilize the block
>device library", so select rathe
At this point in the DM migration, all platforms enable DM. BLK requires
DM. Make BLK "def_bool y" in the cases it had been "default y" to make
this clearer. Now remove the symbol requirement from other places as it
is redundant here.
Signed-off-by: Tom Rini
---
drivers/ata/Kconfig | 1 -
dri
As this is an SPL related driver, and in SPL enabling SPL_BLK is
optional, make this depend on the correct symbol.
Signed-off-by: Tom Rini
---
common/spl/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 6405374bcc12..80c80d
The BLK symbol is used both for "we have a block device subsystem
enabled" and "we need to utilize the block device library functions". In
the case of efi_loader, it is the case of "we need to utilize the block
device library", so select rather than depends on it. In turn, also
disable EFI_LOADER o
HiI am copying this message to you and GL team.Regarding license
violation:U-boot’s license requires Gl.iNet to provide the source-code for
U-boot (including any modifications they made) to anybody that asks for it.
So…GL team refused to send source code nor .bin
> On Fri, May 24, 2024 at 06:19:54PM +0200, Jerome Forissier wrote:
> > - Make the support of HTTPS in the wget command easier. Javier T. (CC'd)
> > has some additional lwIP and Mbed TLS patches to do so. With that it
> > becomes possible to fetch and launch a distro installer such as Debian
> > et
Hi Das U-Boot developers,
I found several vulnerabilities in the u-boot filesysetm implementation,
1. in file fs/squashfs/sqfs_inode.c function sqfs_inode_size. The
parameter blk_size is directly or indirectly from the storage data.
Howver, without a sanity check, this value is directly used in t
Hi Andy,
On Tue, 4 Jun 2024 at 16:17, Andy Shevchenko <
andriy.shevche...@linux.intel.com> wrote:
> On Tue, May 28, 2024 at 07:09:14AM -0700, Raymond Mao wrote:
> > Port mbedtls with dummy libc header files.
> > Add mbedtls default config header file.
> > Optimize mbedtls default config by disabl
On Tue, May 28, 2024 at 07:09:14AM -0700, Raymond Mao wrote:
> Port mbedtls with dummy libc header files.
> Add mbedtls default config header file.
> Optimize mbedtls default config by disabling unused features to
> reduce the target size.
> Add mbedtls kbuild makefile.
> Add Kconfig and mbedtls co
On Fri, May 31, 2024 at 09:32:38AM +0300, Ilias Apalodimas wrote:
> On Tue, 28 May 2024 at 17:10, Raymond Mao wrote:
> >
> > lib/mbedtls/update-mbedtls-subtree.sh is a wrapper of git subtree
> > commands.
> > Usage from U-Boot top directory, run:
...
> > +if ! git remote get-url mbedtls_upst
Update fit documentation to clarify that FPGA images are vendor specific and
opaque bitstreams.
Signed-off-by: Sam Povilus
---
doc/usage/fit/source_file_format.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/usage/fit/source_file_format.rst
b/doc/usage/fit/source_fi
Update documentation to remove un-needed curly braces.
Signed-off-by: Sam Povilus
---
doc/usage/fit/source_file_format.rst | 28 ++--
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/doc/usage/fit/source_file_format.rst
b/doc/usage/fit/source_file_format.r
Sam Povilus (2):
doc: Remove extraneous curly braces
doc: add clarity to what a "fpga" image is
doc/usage/fit/source_file_format.rst | 28 ++--
1 file changed, 14 insertions(+), 14 deletions(-)
--
2.34.1
On Tue, Jun 04, 2024 at 07:53:54PM +0300, Ilias Apalodimas wrote:
> On Tue, 4 Jun 2024 at 19:05, Raymond Mao wrote:
> >
> > Hi Ilias,
> >
> > On Fri, 31 May 2024 at 07:42, Ilias Apalodimas
> > wrote:
> >>
> >> On Tue, 28 May 2024 at 17:15, Raymond Mao wrote:
> >> >
> >> > Add porting layer for
On Fri, May 31, 2024 at 01:07:23PM -0400, Raymond Mao wrote:
> Hi Ilias and Tom,
>
> On Thu, 30 May 2024 at 16:17, Ilias Apalodimas
> wrote:
>
> > Hi Tom
> >
> > On Wed, 29 May 2024 at 22:47, Tom Rini wrote:
> > >
> > > On Wed, May 29, 2024 at 03:42:04PM -0400, Raymond Mao wrote:
> > > > Hi Tom
Hi,
On 04.06.24 18:33, Sebastian Reichel wrote:
Hi,
On ROCK 5B power is usually supplied via it's USB-C port. This port has the
data lines connected to RK3588, VBUS connected to the input regulator and
CC pins connected to FUSB302. FUSB302 is a USB-C controller, which can be
accessed via I2C fr
On Tue, Jun 04, 2024 at 11:50:20AM +0100, Jiaxun Yang wrote:
>
>
> 在2024年5月23日五月 下午4:43，Tom Rini写道：
> > On Thu, May 23, 2024 at 04:38:52PM +0100, Jiaxun Yang wrote:
> >>
> >>
> >> 在2024年5月23日五月 下午4:25，Tom Rini写道：
> >> > On Wed, May 22, 2024 at 04:34:43PM +0100, Jiaxun Yang wrote:
> >> >
> >> >>
On Tue, 4 Jun 2024 at 19:05, Raymond Mao wrote:
>
> Hi Ilias,
>
> On Fri, 31 May 2024 at 07:42, Ilias Apalodimas
> wrote:
>>
>> On Tue, 28 May 2024 at 17:15, Raymond Mao wrote:
>> >
>> > Add porting layer for X509 cert parser on top of MbedTLS X509
>> > library.
>> >
>> > Signed-off-by: Raymond
Hi Ilias,
On Fri, 31 May 2024 at 06:00, Ilias Apalodimas
wrote:
> Hi Raymond,
>
> [...]
>
> > +
> > +/**
> > + * rsa_parse_pub_key() - decodes the BER encoded buffer and stores in
> the
> > + * provided struct rsa_key, pointers to the raw
> key as is,
> > + *
Add new section for USB TypeC Port Manager (TCPM) support, which
is needed to figure out cable orientation of USB-C plus and to do
USB PD communication.
Signed-off-by: Sebastian Reichel
---
MAINTAINERS | 8
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index f8
This adds TCPM framework in preparation for fusb302 support, which can
handle USB power delivery messages. This is needed to solve issues with
devices, that are running from a USB-C port supporting USB-PD, but not
having a battery.
Such a device currently boots to the kernel without interacting wi
Now that the TCPM framework exists we can introduce fusb302
driver using it. This chip is a very common USB-C controller
chip with PD support, which can be found in the Radxa Rock 5B
among many other boards. Apart from Power Delivery, it also
handles detection of the cable orientation. That can be
Since older U-Boot releases do not negotiate USB PD, the kernel
DT may not enable the USB-C controller by default to avoid a
regression. The plan is to upstream it with 'status = "fail";'
instead. U-Boot should then mark it as 'status = "okay";' if
it negotiated USB PD.
Signed-off-by: Sebastian Re
Enable support for the fusb302 USB Type-C controller.
This will do early USB PD (power deliver) negotiation, which must happen
within 5 seconds after the USB-C connector has plugged in according to
the specification. It takes almost 5 seconds to go through the bootchain
on Rock 5B and jump to the
Hi,
On ROCK 5B power is usually supplied via it's USB-C port. This port has the
data lines connected to RK3588, VBUS connected to the input regulator and
CC pins connected to FUSB302. FUSB302 is a USB-C controller, which can be
accessed via I2C from RK3588. The USB-C controller is needed to figure
Installing patman with `cd ./tools/patman && pip install -e .` fails
with the error below.
As described in the error output, the license line is not allowed to be
only defined in the setup.py.
> $ cd ./tools/patman && pip install -e .
> Obtaining file:///.../u-boot/tools/patman
> Installing bui
Hi Ilias,
On Fri, 31 May 2024 at 06:03, Ilias Apalodimas
wrote:
> On Tue, 28 May 2024 at 17:17, Raymond Mao wrote:
> >
> > Add porting layer for MSCode on top of MbedTLS ASN1 library.
> >
> > Signed-off-by: Raymond Mao
> > ---
> > Changes in v2
> > - Move the porting layer to MbedTLS dir.
> >
The method `ConfigParser.readfp()` is marked deprecated[1].
In Python 3.12 this method have been removed, so replace it with
`ConfigParser.read_file()`.
[1]
https://docs.python.org/3.11/library/configparser.html#configparser.ConfigParser.readfp
Signed-off-by: Brandon Maier
CC: Simon Glass
---
The method `ConfigParser.readfp()` is marked deprecated[1].
In Python 3.12 this method have been removed, so replace it with
`ConfigParser.read_file()`.
[1]
https://docs.python.org/3.11/library/configparser.html#configparser.ConfigParser.readfp
Signed-off-by: Brandon Maier
CC: Simon Glass
---
The methods `unittest.assertEquals()` and
`unittest.assertRegexpMatches()` are marked deprecated[1].
In Python 3.12 these aliases have been removed, so do a sed to replace
them with their new names.
[1] https://docs.python.org/3.11/library/unittest.html#deprecated-aliases
Signed-off-by: Brandon
Hi Ilias,
On Fri, 31 May 2024 at 07:42, Ilias Apalodimas
wrote:
> On Tue, 28 May 2024 at 17:15, Raymond Mao wrote:
> >
> > Add porting layer for X509 cert parser on top of MbedTLS X509
> > library.
> >
> > Signed-off-by: Raymond Mao
> > ---
> > Changes in v2
> > - Move the porting layer to Mbe
Hi Mattijs,
On 6/4/24 5:15 PM, Mattijs Korpershoek wrote:
According to [1], we should use bootmeth when describing the
struct bootmeth:
"""
For version 2, a new naming scheme is used as above:
- bootdev is used instead of bootdevice, because 'device' is overused,
is everywhere in
lla, appears 1300 times in
> U-Boot
> """
>
> SO I think we should change it to bootmeth(s) indeed.
Ah, thank you for the link, that is helpful.
I've done the global rename, made this into a series here:
https://lore.kernel.org/all/20240604-bootmeth-typos-v2-0-821683a95...@baylibre.com
>
> Reviewed-by: Quentin Schulz
>
> Thanks,
> Quentin
According to [1], we should use bootmeth when describing the
struct bootmeth:
"""
For version 2, a new naming scheme is used as above:
- bootdev is used instead of bootdevice, because 'device' is overused,
is everywhere in U-Boot, can be confused with udevice
- bootmeth - because
Fix some trivial typos found by browsing the code.
Done with flyspell.
Reviewed-by: Quentin Schulz
Signed-off-by: Mattijs Korpershoek
---
include/bootmeth.h | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/bootmeth.h b/include/bootmeth.h
index 0fc36104ece
While working on bootflow, we noticed some wording inconsistencies with
bootmeth versus bootmethod.
According to [1], we should use bootmeth(s), not bootmethod(s):
"""
For version 2, a new naming scheme is used as above:
- bootdev is used instead of bootdevice, because 'device' is overused,
From: Lukas Funke
Add driver to access ZynqMP efuses. This is a u-boot port of [1].
Note: Accessing eFuses requires eFuse access to be enabled in the
underlying PMU firmware.
[1]
https://lore.kernel.org/all/20240224114516.86365-8-srinivas.kandaga...@linaro.org/
Signed-off-by: Lukas Funke
---
From: Lukas Funke
Add functions to access efuses through PMU firmware
interface.
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/firmware/firmware-zynqmp.c | 31 ++
include/zynqmp_firmware.h | 2 ++
2 files changed, 33 insertions(+)
diff --
From: Lukas Funke
Use common zynqmp_pm_get_chipid() function to get the chip revision
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/soc/soc_xilinx_zynqmp.c | 21 +
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/soc/soc_xilinx_zynqmp.
From: Lukas Funke
Use common zynqmp_pm_get_chipid() function to get the chip revision
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/soc/soc_xilinx_versal.c | 13 ++---
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/soc_xilinx_versal.c b/drive
From: Lukas Funke
Use common zynqmp_pm_get_chipid() function to get the chip revision
Signed-off-by: Lukas Funke
---
(no changes since v1)
drivers/soc/soc_xilinx_versal_net.c | 13 ++---
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/soc/soc_xilinx_versal_net.c
From: Lukas Funke
Enable CMD_FUSE and ZYNQMP_EFUSE in order to be able to write
ZyqnMP eFuses from within the bootloader.
Signed-off-by: Lukas Funke
---
(no changes since v1)
configs/xilinx_zynqmp_kria_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/xilinx_zynqmp_kria
From: Lukas Funke
Enable CMD_FUSE and ZYNQMP_EFUSE in order to be able to write
ZyqnMP eFuses from within the bootloader for Kria SoM.
Signed-off-by: Lukas Funke
---
(no changes since v1)
configs/xilinx_zynqmp_virt_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/xilin
From: Lukas Funke
This series adds a driver to read and write ZynqMP eFuses [1]. The
driver can be accessed by the 'fuse read' and 'fuse write' commands
Example:
=> fuse read 0 0xc 3
Reading bank 0:
Word 0x000c: 3cb16685 013af244 4000
Note: Accessing eFuses requires eFuse access to b
On Tue, Jun 04, 2024 at 07:57:38AM +0200, Heinrich Schuchardt wrote:
> On 6/4/24 05:34, Brunham, Kalen wrote:
> > Hi Tom/Heinrich,
> >
> > I have https://github.com/u-boot/u-boot/pull/574 that has a proposed
> > change. It is currently failing clang sandbox, which looks a little strange
> > and
From: Lukas Funke
This series enables the CPU reset in the SPL for ZynqMP based platforms.
This only works if CONFIG_SYSRESET is disabled. This is usually the
case since the the regular sysreset requires bl31 firmware to be loaded
in order to hand the sysreset over to PMU firmware. In SPL we can
From: Lukas Funke
This commit enables SPL to reset the CPU via PMU-firmware. The usual
reset mechanism requires bl31 to be loaded which may not be the case in
SPL.
Signed-off-by: Lukas Funke
---
Changes in v2:
- Drop 2/2 since reworking ZYNQMP_FIRMWARE dependency is out-of-scope
board/xilinx
Enable OF_UPSTREAM for AM625-beagleplay board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon
---
Based off u-boot
next 15d0dcc0ec1f Merge tag 'u-boot-imx-next-20240603
Before this commit, usb_get_descriptor() failed for some flakey USB
devices. We hereby adopt the more robust linux implementation [1].
For instance, for the "Alcor Micro Corp. Flash Drive" (VID 0x058f, PID
0x6387), the following behavior occurs from time to time:
=> usb start
starting USB...
Bus
On 6/3/24 22:28, Tim Harvey wrote:
> On Mon, Jun 3, 2024 at 1:18 AM Christian Loehle
> wrote:
>>
>> On 5/31/24 21:47, Tim Harvey wrote:
>>> Greetings,
>>>
>>> I'm seeing an issue on an imx8mm board (imx8mm-venice-gw73xx) where
>>> for a specific set of microsd cards if I have accessed the microsd
From: Vasileios Amoiridis
Currently, if the environment is not in the current boot media, the
env_get_location() is returning ENVL_UNKNOWN or ENVL_NOWHERE which
is not true (i.e booting from FLASH with environment in eMMC). This
commit adds an extra check to find the environment in the other
supp
From: Vasileios Amoiridis
Changes in v2:
- Remove duplication of custom hardcoded env_locations[] code.
- Add implementation with general arch_env_get_location(op, prio)
v1:
https://lore.kernel.org/u-boot/20240522174738.73522-1-vassilisa...@gmail.com/
Vasileios Amoiridis (1):
UBI block is virtual block device, which is an abstraction
over MTD layer. Therefore it is logical to use it in
combination with MTD drivers.
Signed-off-by: Alexey Romanov
---
drivers/mtd/nand/spi/core.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/
UBI partition is abstraction over UBI volumes.
Can be used by UBI block device.
Signed-off-by: Alexey Romanov
Reviewed-by: Heiko Schocher
---
drivers/mtd/ubi/Makefile | 2 +-
drivers/mtd/ubi/part.c | 99
include/part.h | 2 +
3 files change
Block devices can already set partition type at initialization
stage, so, in this case is no point in searching for partition type.
Signed-off-by: Alexey Romanov
Reviewed-by: Heiko Schocher
---
disk/part.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/disk/part.c b/disk/part.c
inde
UBI block is an virtual device, that runs on top
of the MTD layer. The blocks are UBI volumes.
Intended to be used in combination with other MTD
drivers.
Despite the fact that it, like mtdblock abstraction,
it used with UCLASS_MTD, they can be used together
on the system without conflicting. For e
Introduce ubi_volume_offset_write() helper, which
allow to write to ubi volume with specified offset.
Signed-off-by: Alexey Romanov
Reviewed-by: Heiko Schocher
Acked-by: Heiko Schocher
---
cmd/ubi.c | 71 +++--
env/ubi.c | 10 +++
Now user can pass an additional parameter 'offset'
to ubi_volume_read() function.
Signed-off-by: Alexey Romanov
Reviewed-by: Heiko Schocher
Acked-by: Heiko Schocher
---
cmd/ubi.c | 6 +++---
env/ubi.c | 6 +++---
include/ubi_uboot.h | 2 +-
3 files changed, 7 insertions(+),
Hello!
This series adds support for the UBI block device, which
allows to read/write data block by block. For example,
it can now be used for BCB or Android AB command:
$ bcb load ubi 0 part_name
Tested only on SPI NAND, so bind is made only for
SPI NAND drivers. Can be used with mtdblock devi
Bind SPI-NAND driver to MTD block driver.
Reviewed-by: Frieder Schrempf
Signed-off-by: Alexey Romanov
---
drivers/mtd/nand/spi/core.c | 20
1 file changed, 20 insertions(+)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 62c28aa422..8edb468aed
MTD block - abstraction over MTD subsystem, allowing
to read and write in blocks using BLK UCLASS.
Signed-off-by: Alexey Romanov
---
drivers/block/blk-uclass.c | 1 +
drivers/mtd/Makefile | 1 +
drivers/mtd/mtdblock.c | 227 +
include/linux/mtd/m
Add new MTD partition driver, which can be useful with
mtdblock driver combination.
Signed-off-by: Alexey Romanov
---
disk/part.c | 3 +-
drivers/mtd/Kconfig | 1 +
drivers/mtd/mtdpart.c | 76 +++
include/part.h| 3 ++
4 files change
Hello!
This series adds support for the mtdblock device, which
allows to read/write data block by block. For example,
it can now be used for BCB or Android AB command:
$ bcb load mtd 0 part_name
Tested only on SPI NAND, so bind is made only for
SPI NAND drivers.
---
Changes V1 -> V2 [1]:
Hi,
I sent this email to das u-boot one month ago, however, I haven't
gotten a reply yet. Do you know what happened?
Best
-- Forwarded message -
发件人： jianqiang wang
Date: 2024年5月1日周三 16:14
Subject: A potential bug in das u-boot nfs implemnetation
To:
Dear all
I found a poten
Hi Mattijs,
On 6/4/24 2:04 PM, Mattijs Korpershoek wrote:
Hi Quentin,
On mar., juin 04, 2024 at 11:47, Quentin Schulz
wrote:
Hi Mattijs,
On 6/3/24 11:11 AM, Mattijs Korpershoek wrote:
Fix some trivial typos found by browsing the code.
Done with flyspell.
Signed-off-by: Mattijs Korpershoe
Hi Quentin,
On mar., juin 04, 2024 at 11:47, Quentin Schulz
wrote:
> Hi Mattijs,
>
> On 6/3/24 11:11 AM, Mattijs Korpershoek wrote:
>> Fix some trivial typos found by browsing the code.
>> Done with flyspell.
>>
>> Signed-off-by: Mattijs Korpershoek > ---
>> include/bootmeth.h | 12 ++--
在2024年5月23日五月 下午4:43，Tom Rini写道：
> On Thu, May 23, 2024 at 04:38:52PM +0100, Jiaxun Yang wrote:
>>
>>
>> 在2024年5月23日五月 下午4:25，Tom Rini写道：
>> > On Wed, May 22, 2024 at 04:34:43PM +0100, Jiaxun Yang wrote:
>> >
>> >> Hi all,
>> >>
>> >> Sorry for flooding the mailing list recently, yet another
在2024年6月1日六月 下午5:37，Maciej W. Rozycki写道：
> On Tue, 21 May 2024, Jiaxun Yang wrote:
>
>> It's nearly impossible to run MIPS OS in virtual (or paged)
>> segment. All MIPS OS and bootloaders are running in KSEG/XKPHYS
>> segment, which directly mapping lower bits of virtual address
>> into physical
On 6/4/24 11:12, Lukas Funke wrote:
On 03.06.2024 17:08, Michal Simek wrote:
On 6/3/24 16:50, Lukas Funke wrote:
On 03.06.2024 16:32, Michal Simek wrote:
On 6/3/24 15:34, lukas.funke-...@weidmueller.com wrote:
From: Lukas Funke
This commit enables SPL to reset the CPU via PMU-firmwar
Good point. See V2.
On Fri, May 17, 2024 at 11:16:19PM +0200, Marek Vasut wrote:
> On 5/17/24 11:18 AM, Philip Oberfichtner wrote:
> > Before this commit, usb_get_descriptor() failed for some flakey USB
> > devices. We hereby adopt the more robust linux implementation [1].
>
> Can you include whi
1 - 100 of 106 matches
Mail list logo
