U-Boot 2024.01-00901-g75d07e0e6e-dirty (Jan 17 2024 - 12:50:56 +0530)
Model: Firefly roc-rk3328-cc
DRAM: 4 GiB
PMIC: RK8050 (on=0x40, off=0x00)
Core: 236 devices, 26 uclasses, devicetree: separate
MMC: mmc@ff50: 1, mmc@ff52: 0
Loading Environment from MMC... *** Warning - bad CRC, usi
Enable video console for Rockchip RK3328.
Signed-off-by: Jagan Teki
---
Changes for v3, v2:
- none
include/configs/evb_rk3328.h| 5 +
include/configs/rk3328_common.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/include/configs/evb_rk3328.h b/include/configs/evb_rk3328.h
index d
Enable and set the start address of pre-console buffer for RK3328.
Signed-off-by: Jagan Teki
---
Changes for v3, v2:
- none
arch/arm/mach-rockchip/Kconfig | 1 +
common/Kconfig | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b
Model: Firefly roc-rk3328-cc
DRAM: 1 GiB (effective 1022 MiB)
Video device 'vop@ff37' cannot allocate frame buffer memory -ensure the
device is set up before relocation
Error binding driver 'rockchip_rk3328_vop': -28
Some drivers failed to bind
initcall sequence 3ffcd5e8 failed at call
From: Jagan Teki
Add support for Rockchip RK3328 VOP.
Require VOP cleanup before handoff to Linux by writing reset values to
WIN registers. Without this Linux VOP trigger page fault as below
[0.752016] Loading compiled-in X.509 certificates
[0.787796] inno_hdmi_phy_rk3328_clk_recalc_rate
From: Jagan Teki
Add Rockchip RK3328 HDMI Out driver.
Signed-off-by: Jagan Teki
---
Changes for v3:
- drop data
Changes for v2:
- none
drivers/video/rockchip/Makefile | 1 +
drivers/video/rockchip/rk3328_hdmi.c | 126 +++
drivers/video/rockchip/rk_hdmi.h |
From: Jagan Teki
Add Rockchip INNO HDMI PHY driver for RK3328.
Reference from linux-next phy-rockchip-inno-hdmi driver.
Signed-off-by: Jagan Teki
---
Changes for v3, v2:
- none
drivers/phy/rockchip/Kconfig | 7 +
drivers/phy/rockchip/Makefile | 1 +
drive
From: Jagan Teki
Add support to get the hdmiphy clock for RK3328 PCLK_HDMIPHY.
Signed-off-by: Jagan Teki
---
Changes for v3, v2:
- none
drivers/clk/rockchip/clk_rk3328.c | 17 +
1 file changed, 17 insertions(+)
diff --git a/drivers/clk/rockchip/clk_rk3328.c
b/drivers/clk/roc
From: Jagan Teki
VOP get and set clock would needed for VOP drivers.
Add support for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- none
Changes for v2:
- Add DCLK get rate
.../include/asm/arch-rockchip/cru_rk3328.h| 34 +++
drivers/clk/rockchip/clk_rk3328.c | 88 +++
From: Jagan Teki
Unlike RK3399, RK3288 the Newer Rockchip SoC's like RK3328 have
different offsets for dsp registers.
Group the dsp register set via dsp_regs pointers so that dsp_offset
would point the dsp_regs to access for any changes in the offset value.
Signed-off-by: Jagan Teki
---
Change
From: Jagan Teki
Unlike RK3399, RK3288 the Newer Rockchip SoC's like RK3328 have
different offsets for win registers.
Group the win register set via win_regs pointers so that win_offset
would point the win_regs to access for any changes in the offset value.
Signed-off-by: Jagan Teki
---
Change
From: Jagan Teki
Get the regs from priv pointer instead of passing it an argument.
This would simplify the code and better readability.
Signed-off-by: Jagan Teki
---
Changes for v3, v2:
- none
drivers/video/rockchip/rk_vop.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff
From: Jagan Teki
Add support for DW HDMI Setup HPD status.
Signed-off-by: Jagan Teki
---
Changes for v3:
- check hdmi->ops
Changes for v2:
- none
drivers/video/dw_hdmi.c | 3 +++
include/dw_hdmi.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/video/dw_hdmi.c b/drivers/vi
From: Jagan Teki
Add support for DW HDMI Read HPD status.
Signed-off-by: Jagan Teki
---
Changes for v3:
- check hdmi->ops
Changes for v2:
- none
drivers/video/dw_hdmi.c | 3 +++
include/dw_hdmi.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/video/dw_hdmi.c b/drivers/vid
From: Jagan Teki
HPD detection on some DW HDMIdesigned SoC's would need to read and
setup the HPD status explicitly.
So, extend the HPD detection code by adding the dw_hdmi_detect_hpd
function and move the default detection code caller there.
The new read and setup hdp will integrate the same f
From: Jagan Teki
DW HDMI support Vendor PHY like Rockchip RK3328 Inno HDMI PHY.
Extend the vendor phy handling by adding platform phy hooks.
Signed-off-by: Jagan Teki
---
Changes for v3:
- drop data
- assign ops directly
Changes for v2:
- fix meson cfg
drivers/video/dw_hdmi.c | 1
From: Jagan Teki
HDP is a hardware connector event, so detect the same once the
controller and attached PHY initialization are done.
Signed-off-by: Jagan Teki
---
Changes for v3, v2:
- none
drivers/video/rockchip/rk_hdmi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --gi
From: Jagan Teki
Unlike RK3399, Sunxi/Meson DW HDMI the new Rockchip SoC Rk3328 would
support external vendor PHY with DW HDMI chip.
Support this vendor PHY by adding new platform PHY ops via DW HDMI
driver and call the respective generic phy from platform driver code.
This series tested in RK3
On 1/17/24 05:39, AKASHI Takahiro wrote:
This patch set is motivated by the discussion[1] regarding
CONFIG_BOOTEFI_BOOTMGR option.
# This version (v5) contains only the remaining commits.
At the end, bootefi.c will be decomposed into two parts, one for
providing the command itself and one for i
On 1/17/24 04:20, Venkatesh Yadav Abbarapu wrote:
Update the kaslr-seed property and enable the config CONFIG_OF_BOARD_SETUP.
Changes in v2:
- Created macro for size variable.
- Removed malloc and created array for rng buffer.
- Added debug logs for all the apis.
Changes in v3:
- Fixed the re
On Fri, 22 Dec 2023 at 12:36, Sumit Garg wrote:
>
> On Thu, 21 Dec 2023 at 21:08, Caleb Connolly
> wrote:
> >
> >
> >
> > On 20/12/2023 13:07, Sumit Garg wrote:
> > > Hi Caleb,
> >
> > Hi Sumit,
> >
> > [...]
> >
> > >>
> > >> == Upstream DT ==
> > >>
> > >> All Qualcomm boards have had their de
On Sat, Dec 23, 2023 at 6:53 AM Shantur Rathore wrote:
>
> We need BOOTSTD_DEFAULT when BOOTSTD_FULL is selected.
>
> Signed-off-by: Shantur Rathore
> ---
>
> boot/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/boot/Kconfig b/boot/Kconfig
> index 9f5b8a0cb2..fc96aadb27 100644
>
Hi Kever,
On Wed, Jan 10, 2024 at 11:58 AM Shantur Rathore wrote:
>
> Hi Kever,
>
> On Tue, Jan 9, 2024 at 10:55 AM Kever Yang wrote:
> >
> > Hi Shantur, Tom,
> >
> > On 2023/12/10 04:45, Tom Rini wrote:
> > > On Sat, Dec 09, 2023 at 07:49:04PM +, Shantur Rathore wrote:
> > >> On Sat, Dec 9,
Now it is clear that the feature actually depends on efi interfaces,
not "bootefi" command. efi_set_bootdev() will automatically be nullified
if necessary efi component is disabled.
Signed-off-by: AKASHI Takahiro
Reviewed-by: Simon Glass
---
fs/fs.c | 7 +++
1 file changed, 3 insertions(+),
Now it is clear that the feature actually depends on efi interfaces,
not "bootefi" command. efi_set_bootdev() will automatically be nullified
if necessary efi component is disabled.
Signed-off-by: AKASHI Takahiro
Reviewed-by: Ramon Fried
Reviewed-by: Tom Rini
---
net/tftp.c | 10 --
1
At this point, EFI boot manager interfaces is fully independent from
bootefi command. So just rename the configuration parameter.
Signed-off-by: AKASHI Takahiro
Reviewed-by: Simon Glass
---
boot/Makefile | 2 +-
cmd/Kconfig | 4 ++--
cmd/efidebug.c | 4 ++--
lib/e
Some code moved from cmd/bootefi.c is actually necessary only for "bootefi
" command (starting an image manually loaded by a user using U-Boot
load commands or other methods (like JTAG debugger).
The code will never been opted out as unused code by a compiler which
doesn't know how EFI boot manage
This patch set is motivated by the discussion[1] regarding
CONFIG_BOOTEFI_BOOTMGR option.
# This version (v5) contains only the remaining commits.
At the end, bootefi.c will be decomposed into two parts, one for
providing the command itself and one for implementing helper functions.
EFI_LOADER wi
Currently only hw ecc is supported in U-Boot. If any other ecc mode is
given in DT, it simply ignores and switches to hw ecc. So better print
what is being done.
Revert this patch once soft ecc support is fixed in future.
Signed-off-by: Ashok Reddy Soma
Signed-off-by: Venkatesh Yadav Abbarapu
-
Enable CONFIG_OF_BOARD_SETUP, so we could use ft_board_setup()
to enable the kaslr-seed and pass to kernel.
Signed-off-by: Michal Simek
Signed-off-by: Venkatesh Yadav Abbarapu
---
configs/xilinx_zynqmp_kria_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/xilinx_zynqmp_kria
Update the kaslr-seed property and enable the config CONFIG_OF_BOARD_SETUP.
Changes in v2:
- Created macro for size variable.
- Removed malloc and created array for rng buffer.
- Added debug logs for all the apis.
Changes in v3:
- Fixed the return values.
Venkatesh Yadav Abbarapu (2):
xilinx: b
Create a ft_board_setup() api that gets called as part
of bootm/booti before jumping to kernel. In this
ft_board_setup() callback that will inspect the DTB
and insert the device tree blob with the "kaslr-seed" property.
Signed-off-by: Michal Simek
Signed-off-by: Venkatesh Yadav Abbarapu
---
boa
On 1/16/24 07:36, Mayuresh Chitale wrote:
If a disk has an EFI system partition (ESP) then it can be used to
locate the boot files. Add a function to find the ESP.
Signed-off-by: Mayuresh Chitale
Reviewed-by: Heinrich Schuchardt
---
disk/part.c| 16
include/part.h | 11
On Tue, Jan 16, 2024 at 07:44:22PM +0100, Heinrich Schuchardt wrote:
> On 1/16/24 02:43, AKASHI Takahiro wrote:
> > On Mon, Jan 15, 2024 at 03:16:22PM +0100, Heinrich Schuchardt wrote:
> > > On 15.01.24 11:12, AKASHI Takahiro wrote:
> > > > On Mon, Jan 15, 2024 at 09:34:51AM +0100, Heinrich Schucha
On Fri, 8 Dec 2023 01:39:45 +
Andre Przywara wrote:
Hi Samuel,
> On Tue, 31 Oct 2023 00:17:41 -0500
> Samuel Holland wrote:
>
> Hi,
>
> > Now that 32-bit SoCs can load U-Boot proper (and possibly other
> > firmware) from a FIT, use this method by default. SPL_FIT_IMAGE_TINY is
> > require
On Tue, 16 Jan 2024 19:58:56 +0300
Maxim Kiselev wrote:
Hi Maxim,
> вт, 16 янв. 2024 г. в 03:18, Andre Przywara :
> >
> > On Thu, 15 Jun 2023 00:44:06 +0300
> > Maxim Kiselev wrote:
> >
> > Hi Maxim,
> >
> > > From: Maksim Kiselev
> > >
> > > Based on dt-specs fixed-link doesn't require phy-
The CPSW implementations on the AM6x platforms do not support the
selectable RGMII TX clk delay functionality via the RGMII_ID_MODE bit as
the earlier platforms did. According to various TI datasheets, reference
manuals, hardware design guides and TI forum posts from TI, this bit is
"not timed, tes
On Sat, Dec 23, 2023 at 01:44:29AM +0100, Heinrich Schuchardt wrote:
> Provide a unit test for the smbios command.
>
> Provide different test functions for QEMU, sandbox, and other systems.
>
> Signed-off-by: Heinrich Schuchardt
> Acked-by: Ilias Apalodimas
> Reviewed-by: Simon Glass
> ---
>
On 1/16/24 02:43, AKASHI Takahiro wrote:
On Mon, Jan 15, 2024 at 03:16:22PM +0100, Heinrich Schuchardt wrote:
On 15.01.24 11:12, AKASHI Takahiro wrote:
On Mon, Jan 15, 2024 at 09:34:51AM +0100, Heinrich Schuchardt wrote:
On 1/15/24 01:58, AKASHI Takahiro wrote:
On Sun, Jan 14, 2024 at 01:46:4
Hi!
Le mardi 16 janvier 2024, 00:34:24 +07 Patrice CHOTARD a écrit :
> On 1/11/24 18:04, Francesco Dolcini wrote:
> > Hello Tom, Francis
> >
> > On Fri, Dec 29, 2023 at 07:55:37PM +0100, Francis Laniel wrote:
> >> Le jeudi 28 décembre 2023, 21:58:59 CET Tom Rini a écrit :
> >>> On Fri, 22 Dec 20
Hi!
Le vendredi 12 janvier 2024, 00:04:18 +07 Francesco Dolcini a écrit :
> Hello Tom, Francis
>
> On Fri, Dec 29, 2023 at 07:55:37PM +0100, Francis Laniel wrote:
> > Le jeudi 28 décembre 2023, 21:58:59 CET Tom Rini a écrit :
> > > On Fri, 22 Dec 2023 22:02:20 +0100, Francis Laniel wrote:
> > >
During bloblist initialization, load the bloblist via boot arguments
from the previous loader.
If a valid bloblist exists in boot arguments, relocate it into the
fixed bloblist memory region.
If not, fallback to support BLOBLIST_ADDR or BLOBLIST_ALLOC.
Signed-off-by: Raymond Mao
---
Changes in v4
Add arch custom function to get bloblist from boot arguments.
Check whether boot arguments aligns with the register conventions
defined in FW Handoff spec v0.9.
Add bloblist related options into qemu-arm default config.
Remove OF_HAS_PRIOR_STAGE and OF_BOARD from qemu-arm config.
Signed-off-by: Ra
Save boot arguments x[0-3] into an array for handover of bloblist from
previous boot stage.
Signed-off-by: Raymond Mao
---
Changes in v2
- New patch file created for v2.
Changes in V5
- Drop the dependence on OF_BOARD.
arch/arm/cpu/armv8/start.S | 14 ++
1 file changed, 14 insertion
Save boot arguments r[0-3] into an array for handover of bloblist from
previous boot stage.
Signed-off-by: Raymond Mao
---
Changes in v2
- New patch file created for v2.
Changes in v3
- Swap value of r0 with r2.
Changes in v4
- Fix a bug when saving the boot args.
Changes in V5
- Drop the depende
The current bloblist pointer and size can be retrieved from global
data, so we don't need to pass them from the function arguments.
This change also help to remove all external access of gd->bloblist
outside of bloblist module.
Signed-off-by: Raymond Mao
---
Changes in v2
- New patch file created
Instead of expecting the bloblist total size to be the same as the
pre-allocated buffer size, practically we are more interested in
whether the pre-allocated buffer size is bigger than the bloblist
total size.
Signed-off-by: Raymond Mao
Reviewed-by: Ilias Apalodimas
---
Changes in v2
- New patch
Add bloblist_check_reg_conv() to check whether the bloblist is compliant
to the register conventions defined in Firmware Handoff specification.
This API can be used for all Arm platforms.
Signed-off-by: Raymond Mao
---
Changes in v2
- Refactor of bloblist_check_reg_conv().
Changes in v3
- bloblis
This patch set adds/adapts a few bloblist APIs and implements Arm arch
custom function to retrieve the bloblist (aka. Transfer List) from
previous loader via boot arguments when BLOBLIST option is enabled and
all boot arguments are compliant to the register conventions defined
in the Firmware Hando
вт, 16 янв. 2024 г. в 03:18, Andre Przywara :
>
> On Thu, 15 Jun 2023 00:44:06 +0300
> Maxim Kiselev wrote:
>
> Hi Maxim,
>
> > From: Maksim Kiselev
> >
> > Based on dt-specs fixed-link doesn't require phy-handle to be used.
>
> Do you have such a board?
Yes, I had a custom board with T113 SoC w
On Tue, Jan 16, 2024 at 12:33:18PM +, Caleb Connolly wrote:
> Hi Tom,
>
> The following changes since commit 697758e7c81131da6db0e3b10515019fe3aca8c9:
>
> Merge branch 'master-sync-dts-663' of
> https://source.denx.de/u-boot/custodians/u-boot-sh (2024-01-14 18:07:49 -0500)
>
> are availa
On Mon, Jan 15, 2024 at 11:45:54PM -0300, Fabio Estevam wrote:
> Hi Tom,
>
> Please pull from u-boot-imx, thanks.
>
> The following changes since commit 547d3dd28a46a18d59e00a153c8becca8d4e8cf9:
>
> Merge branch '2024-01-12-assorted-fixes' (2024-01-12 08:34:50 -0500)
>
> are available in the
On Mon, Jan 15, 2024 at 11:48:12AM +0100, Dario Binacchi wrote:
> Hello Tom,
>
> The following changes since commit 697758e7c81131da6db0e3b10515019fe3aca8c9:
>
> Merge branch 'master-sync-dts-663' of
> https://source.denx.de/u-boot/custodians/u-boot-sh (2024-01-14
> 18:07:49 -0500)
>
> are av
Heinrich Schuchardt 于2024年1月15日周一 05:27写道：
>
> On 1/14/24 19:07, Kongyang Liu wrote:
> > Add document for Milk-V Duo board which based on Sophgo's CV1800B SoC.
> >
> > Signed-off-by: Kongyang Liu
> > ---
> >
> > (no changes since v1)
> >
> > doc/board/index.rst| 1 +
> > doc/board
Heinrich Schuchardt 于2024年1月15日周一 05:57写道：
>
> On 1/14/24 19:07, Kongyang Liu wrote:
> > Add support for Sophgo's Milk-V Duo board, only minimal device tree and
> > serial console are enabled, and it can boot via vendor first stage
> > bootloader.
> >
> > Signed-off-by: Kongyang Liu
>
> The seque
On Wed, Jan 17, 2024 at 12:13 AM Patrice Chotard
wrote:
>
> In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are on and
> stdin or stdout or stderr are missing in environment, as fallback, get
> these either from stdio_devices[std] or stdio_devices[std]->name.
>
> Fixes: 6b343ab38d ("console: Print o
On 16.01.24 14:45, Heinrich Schuchardt wrote:
On 16.01.24 13:36, Mayuresh Chitale wrote:
If a disk has an EFI system partition (ESP) then it can be used to
locate the boot files. Add a function to find the ESP.
Signed-off-by: Mayuresh Chitale
Reviewed-by: Heinrich Schuchardt
I ran your patc
In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are on and
stdin or stdout or stderr are missing in environment, as fallback, get
these either from stdio_devices[std] or stdio_devices[std]->name.
Fixes: 6b343ab38d ("console: Print out complete stdio device list")
Signed-off-by: Patrice Chotard
---
On Mon, Jan 15, 2024 at 12:08:26PM -0500, Raymond Mao wrote:
> Hi Tom,
>
> On Mon, 15 Jan 2024 at 09:57, Raymond Mao wrote:
>
> > Hi Tom,
> >
> > On Sat, 13 Jan 2024 at 10:27, Tom Rini wrote:
> >
> >> On Fri, Jan 12, 2024 at 01:33:34PM -0800, Raymond Mao wrote:
> >>
> >> > Get device tree from
On Tue, Jan 16, 2024 at 06:54:57AM +0100, Wadim Egorov wrote:
> Hello,
>
> is there something missing in this series for it to be applied?
> I would like to add support for a 2nd k3/am64x board based on this. So it
> would be nice to know if I can do it the same way or should wait for more k3
> c
On Thu, 4 Jan 2024 at 18:53, Chiu, Chasel wrote:
>
>
>
> > -Original Message-
> > From: Ard Biesheuvel
> > Sent: Thursday, January 4, 2024 12:43 AM
> > To: Chiu, Chasel
> > Cc: Simon Glass ; devicet...@vger.kernel.org; Mark
> > Rutland
> > ; Rob Herring ; Tan, Lean Sheng
> > ; lkml ; Dh
We have to use 'Return:' to render the description of the return value in
the HTML documentation.
Fixes: f55aa4454ac3 ("part: Add a fallback for part_get_bootable()")
Fixes: dcffa4428d03 ("part: Add a function to find the first bootable
partition")
Signed-off-by: Heinrich Schuchardt
---
include
Yo,
On Wed, Jan 03, 2024 at 06:49:19PM -0700, Simon Glass wrote:
> Standard passage provides for a bloblist to be passed from one firmware
> phase to the next. That can be used to pass the devicetree along as well.
> Add an option to support this.
>
> Tests for this will be added as part of the U
On 16.01.24 13:36, Mayuresh Chitale wrote:
If a disk has an EFI system partition (ESP) then it can be used to
locate the boot files. Add a function to find the ESP.
Signed-off-by: Mayuresh Chitale
Reviewed-by: Heinrich Schuchardt
---
disk/part.c| 16
include/part.h | 11
On 16.01.24 13:36, Mayuresh Chitale wrote:
Some platforms as described by EBBR specification may store images in
the FIRMWARE directory of the UEFI system partition(ESP). Add support
to boot from the EFI system partition if it is enabled for a platform.
Signed-off-by: Mayuresh Chitale
Thank y
On 20/12/2023 13:47, Sumit Garg wrote:
> Hi Caleb,
>
> On Tue, 19 Dec 2023 at 21:34, Caleb Connolly
> wrote:
>>
>> Some of the db410c board support code was written to be generic and
>> placed in mach-snapdragon. However, as the db410c is the only board
>> using this, move the code out of mac
Signed-off-by: Kankan Sun
---
V1 -> V2: separate the ID and Defconfig
drivers/mtd/spi/spi-nor-ids.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 8db522fca0..32329704d5 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/
On 1/16/24 05:50, Venkatesh Yadav Abbarapu wrote:
Create a ft_board_setup() api that gets called as part
of bootm/booti before jumping to kernel. In this
ft_board_setup() callback that will inspect the DTB
and insert the device tree blob with the "kaslr-seed" property.
Signed-off-by: Michal S
Some platforms as described by EBBR specification may store images in
the FIRMWARE directory of the UEFI system partition(ESP). Add support
to boot from the EFI system partition if it is enabled for a platform.
Signed-off-by: Mayuresh Chitale
---
common/spl/Kconfig | 8 +++
common/spl/
If a disk has an EFI system partition (ESP) then it can be used to
locate the boot files. Add a function to find the ESP.
Signed-off-by: Mayuresh Chitale
Reviewed-by: Heinrich Schuchardt
---
disk/part.c| 16
include/part.h | 11 +++
2 files changed, 27 insertions(+)
This series adds support to locate an EFI System Partition on a disk and
boot the next stage from such a parition if found. The next stage image
is expected to be under the FIRMWARE directory as described in the EBBR
specification [1]. Also update the spl_blk_fs and spl_fat drivers to
prefer bootin
Hi Tom,
The following changes since commit 697758e7c81131da6db0e3b10515019fe3aca8c9:
Merge branch 'master-sync-dts-663' of
https://source.denx.de/u-boot/custodians/u-boot-sh (2024-01-14 18:07:49 -0500)
are available in the Git repository at:
g...@source.denx.de:/u-boot/custodians/u-boot-sn
Hi,
On 12/01/2024 08:47, Siddharth Vadapalli wrote:
> From: Kishon Vijay Abraham I
>
> Initialize base address of ring config registers required to natively
> setup ring cfg registers in the absence of Device Manager (DM) services
> at R5 SPL stage.
>
> Signed-off-by: Kishon Vijay Abraham I
>
On Tue, 2024-01-16 at 12:17 +0100, Mattijs Korpershoek wrote:
> Hi Sjoerd
>
> Thank you for the patch.
>
> On ven., janv. 12, 2024 at 09:52, Sjoerd Simons
> wrote:
>
> > Enable usb0 in all boot phases for use with DFU
> >
> > Signed-off-by: Sjoerd Simons
> >
> > ---
> >
> > Changes in v4:
>
Hi Sjoerd
Thank you for the patch.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons wrote:
> Enable usb0 in all boot phases for use with DFU
>
> Signed-off-by: Sjoerd Simons
>
> ---
>
> Changes in v4:
> - Don't force usb0 into peripheral mode
I know that dr_mode = "peripheral" has been removed
Hi Sjoerd,
Thank you for the patch.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons wrote:
> Both AM62 SK and beagleplay support DFU boot in a similar way now;
> Document how to actually run DFU boot for both boards
>
> Signed-off-by: Sjoerd Simons
>
> ---
>
> Changes in v4:
> - New patch
>
>
Hi Sjoerd,
Thank you for the patch.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons wrote:
> Include standard TI K3 dfu environment
>
> Signed-off-by: Sjoerd Simons
Reviewed-by: Mattijs Korpershoek
>
> ---
>
> (no changes since v3)
>
> Changes in v3:
> - Add dfu via environment rather then
Hi Sjoerd, Caleb
On ven., janv. 12, 2024 at 12:55, Caleb Connolly
wrote:
> Hi Sjoerd,
>
> On 12/01/2024 08:52, Sjoerd Simons wrote:
>> When dr_mode is "otg" the dwc3 is initially configured in _OTG mode;
>> However in this mode the gadget functionality doesn't work without
>> further configurat
Hi Sjoerd,
Thank you for the patch.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons wrote:
> When dr_mode is "otg" the dwc3 is initially configured in _OTG mode;
> However in this mode the gadget functionality doesn't work without
> further configuration. To resolve that on gadget start switch
Hi Sjoerd,
Thank you for the patch.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons wrote:
> Add glue code for TI AM62 to the dwc3 driver; Most code adopted from
> TI vendor u-boot code.
>
> Signed-off-by: Sjoerd Simons
>
> ---
>
> Changes in v4:
> - Add config dependency on SYSCON
> - Move de
Hi Sjoerd,
Thank you for the series.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons wrote:
> This series adds DFU support for TI AM62 SK board and new since this
> version also for beagleplay.
>
> Since the last revision, apart from beagleplay support the main changes
> are:
> * Documentation
Hi,
> On 01-12 09:44, Ivan T. Ivanov wrote:
> On 01-11 23:07, Stefan Wahren wrote:
> >
> > Hi Ivan,
> >
> > Am 10.01.24 um 13:29 schrieb Ivan T. Ivanov:
> > > Borrow SD quirks from vendor Linux driver.
> > >
> > > "BCM2712 unfortunately carries with it a perennial bug with the SD
> > > controll
On 01-10 10:00, Florian Fainelli wrote:
> On 1/10/24 04:29, Ivan T. Ivanov wrote:
> > From: Dmitry Malkin
> >
> > MBOX and Watchdog on RPi5/bcm2712 has a different base IO offsets.
>
> s/has a/have a /
>
Thanks!
> > Find them via devicetree blob passed by bootloader.
> >
> > Signed-off-by: D
On 15/01/2024 19:50, Caleb Connolly wrote:
sandbox_flattree enables QCOM_PMIC_GPIO which now depends on BUTTON. As
a result the button tests now get run, but fail because the ADC and GPIO
button drivers aren't enabled.
Enable them to run the tests for sandbox_flattree.
Reported-by: Neil Armstro
Hi,
On Fri, 12 Jan 2024 09:40:43 +0100, Mattijs Korpershoek wrote:
> Igor has not been active for quite some time on lore:
> https://lore.kernel.org/all/?q=igor.opan...@gmail.com
>
> It seems that Android AB and AVB could use some help maintaining.
>
> I'm interested in helping with maintaining
Hi Tom, all,
On ven., janv. 12, 2024 at 08:50, Tom Rini wrote:
> On Fri, Jan 12, 2024 at 09:40:43AM +0100, Mattijs Korpershoek wrote:
>
>> Igor has not been active for quite some time on lore:
>> https://lore.kernel.org/all/?q=igor.opan...@gmail.com
>>
>> It seems that Android AB and AVB could
On Tue, Jan 16, 2024 at 02:01:02AM +0100, Marek Vasut wrote:
> On 1/15/24 16:44, Francesco Dolcini wrote:
> > On Sat, Jan 13, 2024 at 07:33:17PM +0100, Marek Vasut wrote:
> > 0059, V1.1A and V1.1B, use a 20MHz oscillator
> > 0055, V1.1A, V1.1B, V1.1C and V1.1D, use a 20Mhz oscillator
>
> Do you ha
87 matches
Mail list logo
