Hi Sjoerd Thank you for the patch.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons <sjo...@collabora.com> wrote: > Enable usb0 in all boot phases for use with DFU > > Signed-off-by: Sjoerd Simons <sjo...@collabora.com> > > --- > > Changes in v4: > - Don't force usb0 into peripheral mode I know that dr_mode = "peripheral" has been removed as requested by Roger here: https://lore.kernel.org/all/054aa15f-05b9-4645-ab00-fac1be46d...@kernel.org/ However, the reason for this was the following series: https://lore.kernel.org/all/20230706-handle-otg-as-periph-v3-0-27e24fa17...@baylibre.com/ I've spoken to Julien (off-list) about the above series and he confirmed that there are no plans to keep working this. Therefore, I'd prefer to re-instate dr_mode = "peripheral" here to make this series simpler and focus on enabling DFU. Would that be possible ? > > Changes in v3: > - Enable usb nodes in all boot phases > > Changes in v2: > - Only enable usb port 0 DFU in SPL > > arch/arm/dts/k3-am625-sk-u-boot.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi > b/arch/arm/dts/k3-am625-sk-u-boot.dtsi > index fa778b0ff4c..67c9fa2bbc3 100644 > --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi > +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi > @@ -46,3 +46,11 @@ > &cpsw_port2 { > status = "disabled"; > }; > + > +&usbss0 { > + bootph-all; > +}; > + > +&usb0 { > + bootph-all; > +}; > -- > 2.43.0
