Hi Tom,
Please pull this PR.
Summary:
- NPCM7xx FIU SPI driver (Jim Liu)
- AT45DB641E dataflash (Luca Ellero)
CI:
https://source.denx.de/u-boot/custodians/u-boot-spi/-/pipelines/11912
thanks,
Jagan.
The following changes since commit c70c0102af5413cadde6bf90044cb75aefef0584:
Merge tag 'efi
On Tue, May 3, 2022 at 5:51 PM Jagan Teki wrote:
>
> From: Jim Liu
>
> Add Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master
> controller driver using SPI-MEM interface.
>
> The FIU supports single, dual or quad communication interface.
> The FIU controller driver provides flash access in UMA
On 5/3/22 21:35, Tom Rini wrote:
On Tue, May 03, 2022 at 09:18:33PM +0200, Heinrich Schuchardt wrote:
CONFIG_DM_EVENT without CONFIG_EVENT is non-functional. Select instead
of imply CONFIG_EVENT.
Remove superfluous stub in include/event.h.
Fixes: 5b896ed5856f ("event: Add events for device
Hi!
2022년 4월 26일 (화) 06:11, Heinrich Schuchardt <
heinrich.schucha...@canonical.com>님이 작성:
> Don't assign a value to variable speedmode which is never used.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> cmd/mmc.c | 6 --
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/cm
Hi Jagan
Thanks for your reply and correction.
If you have any problems please let me know.
On Tue, May 3, 2022 at 8:21 PM Jagan Teki wrote:
>
> From: Jim Liu
>
> Add Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master
> controller driver using SPI-MEM interface.
>
> The FIU supports single,
On 03.05.22 11:24, Chris Packham wrote:
This converts the following to Kconfig:
CONFIG_MTD_CONCAT
Signed-off-by: Chris Packham
---
This touches octeontx_common.h but only to remove a line that is already
commented out. Other than that etamin was the only board that had this
enabled.
Review
On 03.05.22 11:13, Pali Rohár wrote:
CONFIG_MVEBU_NAND_BOOT, CONFIG_MVEBU_SPI_BOOT, CONFIG_MVEBU_MMC_BOOT and
CONFIG_MVEBU_UBOOT_DFLT_NAME are unused when CONFIG_CMD_MVEBU_BUBT is not
enabled. So hide them.
Signed-off-by: Pali Rohár
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
cmd/mvebu
On 03.05.22 11:01, Pali Rohár wrote:
NVMe support is already enabled, so add it into boot targets.
Signed-off-by: Pali Rohár
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
include/configs/mvebu_armada-37xx.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/mvebu_armada
Hi Jagan,
> -Original Message-
> From: Jagan Teki
> Sent: Tuesday, May 3, 2022 9:23 PM
> To: Chin-Ting Kuo
> Subject: Re: [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver
>
> On Tue, May 3, 2022 at 6:44 PM Chin-Ting Kuo
> wrote:
> >
> > Hi Jagan,
> >
> > Thanks for the review.
On Thu, Apr 21, 2022 at 04:10:59PM +, Andrew Scull wrote:
> Add a new config to control whether the driver for legacy virtio PCI
> devices is included in the build. VIRTIO_PCI_LEGACY is included by
> default when VIRTIO_PCI is selected, but it can also be independently
> toggled.
>
> Signed-o
Many LicheePi Nano boards come with SPI flash soldered, which already
works for booting the SPL and loading U-Boot proper.
With the updated DTB, we can now also use the SPI flash from U-Boot
proper, so enable the bits in the defconfig, to allow loading binaries
from SPI flash.
There seem to be boar
The original Allwinner F1C100 .dtsi imported from the Linux kernel tree
used the wrong compatible string for the watchdog timer, so the Allwinner
DM reset driver was not working properly. We worked around this by
disabling the SYSRESET driver, so the hardcoded SPL reset driver took
over.
Now the is
The initial U-Boot F1C100s port was based on the mainline kernel DT
files, which were quite basic and were missing the essential MMC and
SPI peripherals. While we could work around this in the SPL by
hardcoding the required information, this left U-Boot proper without SD
card or SPI flash support,
The SPI controllers in the Allwinner F1Cx00 series of SoCs are
compatible to the H3 IP. The only difference in the integration is
the missing mod clock in the F1C100, instead the SPI clock is directly
derived from the AHB clock.
We *should* be able to model this through the DT, but the addition of
As George rightfully pointed out [1], the spi-sunxi driver programs the
speed and mode settings only when the respective functions are called,
but this gets lost over a call to release_bus(). That asserts the
reset line, thus forces each SPI register back to its default value.
Adding to that, tryin
The current SPI clock divider calculation has two problems:
- We use a normal round-down division, which results in a divider
typically being too small, resulting in a too high frequency on the bus.
- The calculation for the power-of-two divider is very inaccurate, and
again rounds down, which
From: George Hilliard
The f1c100s has a clock tree similar to those of other sunxi parts.
Add support for it.
Signed-off-by: George Hilliard
Signed-off-by: Yifan Gu
Acked-by: Sean Anderson
[Andre: add PIO and I2C]
Signed-off-by: Andre Przywara
---
drivers/clk/sunxi/Kconfig | 7
So far the U-Boot proper support for the Allwinner F1C100 family of SoCs
was really limited: we could realistically only deal with FEL booting,
as there was no storage or network device acessible from U-Boot proper.
This series enables the MMC and SPI controller, to be able to actually
load someth
On Tue, May 03, 2022 at 09:18:33PM +0200, Heinrich Schuchardt wrote:
> CONFIG_DM_EVENT without CONFIG_EVENT is non-functional. Select instead
> of imply CONFIG_EVENT.
>
> Remove superfluous stub in include/event.h.
>
> Fixes: 5b896ed5856f ("event: Add events for device probe/remove")
> Reported-
On Tue, May 3, 2022 at 12:03 PM Fabio Estevam wrote:
>
> From: Fabio Estevam
>
> The generated flash.bin does not boot the imx8mn evk LPDDR4 variant
> as it misses the spl.bin description in binman.
>
> Add its entry to fix the boot on the imx8mn evk LPDDR4 variant.
>
> Signed-off-by: Fabio Estev
CONFIG_DM_EVENT without CONFIG_EVENT is non-functional. Select instead
of imply CONFIG_EVENT.
Remove superfluous stub in include/event.h.
Fixes: 5b896ed5856f ("event: Add events for device probe/remove")
Reported-by: Jan Kiszka
Signed-off-by: Heinrich Schuchardt
---
drivers/core/Kconfig | 2 +-
\o/
Am 03.05.22 um 13:54 schrieb Stefan Roese:
Hi Josua,
On 03.05.22 09:17, Josua Mayer wrote:
Am 03.05.22 um 09:16 schrieb Stefan Roese:
On 02.05.22 16:18, Josua Mayer wrote:
- prog_eeprom: write_tlvinfo_tlv_eeprom
- update_crc: tlvinfo_update_crc
- is_valid_tlv: is_valid_tlvinfo_entry
- is
From: Fabio Estevam
The generated flash.bin does not boot the imx8mn evk LPDDR4 variant
as it misses the spl.bin description in binman.
Add its entry to fix the boot on the imx8mn evk LPDDR4 variant.
Signed-off-by: Fabio Estevam
---
arch/arm/dts/imx8mn-evk-u-boot.dtsi | 4 +++-
1 file changed
The NanoPi-R2S doesn't have eMMC so use the sdcard as the device
to save the environment variables
Signed-off-by: Emmanuel Vadot
---
configs/nanopi-r2s-rk3328_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/nanopi-r2s-rk3328_defconfig
b/configs/nanopi-r2s-rk3328_defconfig
From: Rafał Miłecki
U-Boot stores its setup as environment variables. It's a list of
key-value pairs stored on flash device with a custom header.
This commit adds an NVMEM driver that:
1. Provides NVMEM access to environment vars binary data
2. Extracts variables as NVMEM cells
It can be used f
On Tue, May 3, 2022 at 4:42 AM Peng Fan (OSS) wrote:
>
> From: Peng Fan
>
> Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
> set_wdog_reset function could be handled by imx_watchdog.c driver.
>
> Signed-off-by: Peng Fan
> ---
> arch/arm/dts/imx8mm-venice-u-boot.dtsi | 4
> arc
On Tue, May 3, 2022 at 4:39 AM Peng Fan (OSS) wrote:
>
> From: Peng Fan
>
> Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MP.
>
> Signed-off-by: Peng Fan
> ---
> include/configs/imx8m.h | 8
> include/configs/imx8mp_evk.h | 17 +
> inc
On Tue, May 3, 2022 at 4:39 AM Peng Fan (OSS) wrote:
>
> From: Peng Fan
>
> Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MN.
>
Peng,
s/gerneralized/generalized
(looks like that typo is all the patches in your series)
Great cleanup - thanks! This is a great start to getti
On Tue, May 3, 2022 at 4:39 AM Peng Fan (OSS) wrote:
>
> From: Peng Fan
>
> Some SPL definitions could be gerneralized, so use imx8m.h for that.
> i.MX8MN/Q/P will follow up.
>
> Signed-off-by: Peng Fan
> ---
> include/configs/imx8m.h | 29 +
> include/co
On Tue, May 03, 2022 at 09:24:57PM +1200, Chris Packham wrote:
> This converts the following to Kconfig:
> CONFIG_MTD_CONCAT
>
> Signed-off-by: Chris Packham
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Tue, May 03, 2022 at 11:06:24AM -0400, Tom Rini wrote:
> On Tue, May 03, 2022 at 08:30:14AM -0400, Tom Rini wrote:
>
> > Based on reading https://www.msys2.org/docs/ci/ and "Other Systems"
> > rework how we update MSYS2 to the current version. We run it once, to
> > perform nothing other than
On Tue, May 03, 2022 at 08:30:14AM -0400, Tom Rini wrote:
> Based on reading https://www.msys2.org/docs/ci/ and "Other Systems"
> rework how we update MSYS2 to the current version. We run it once, to
> perform nothing other than being the first run, then we run pacman
> twice.
>
> Signed-off-by:
On Sat, Apr 30, 2022 at 12:56:45AM -0600, Simon Glass wrote:
> Move this documentation over to .rst format.
>
> Signed-off-by: Simon Glass
For the series, applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, May 02, 2022 at 05:53:36PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull this next batch of Marvell related patches:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, 2 May 2022 20:57:35 -0500
Samuel Holland wrote:
Hi Samuel,
> On 4/30/22 7:59 PM, Andre Przywara wrote:
> >>> So those DT updates are really only important for mobile devices like
> >>> the
> >>> Pinephone, which probably don't use UEFI booting.
> >>
> >> We would really
Am Dienstag, dem 03.05.2022 um 20:24 +0800 schrieb Peng Fan (OSS):
> From: Peng Fan
>
> pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
> set_wdog_reset function could be handled by imx_watchdog.c driver.
Thank you for the cleanup!
Tested on phyCORE-i.MX8MM and phyCORE-i.MX8M
On 5/3/22 14:24, Peng Fan (OSS) wrote:
From: Peng Fan
Add pinctrl_wdog.
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
There is already pinctrl_watchdog_gpio .
Any changes to the main DT should really be submitted
On Tue, May 3, 2022 at 6:44 PM Chin-Ting Kuo
wrote:
>
> Hi Jagan,
>
> Thanks for the review.
>
> > -Original Message-
> > From: Jagan Teki
> > Sent: Tuesday, May 3, 2022 8:32 PM
> > To: Chin-Ting Kuo
> > Subject: Re: [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver
> >
> > On Th
Hi Jagan,
Thanks for the review.
> -Original Message-
> From: Jagan Teki
> Sent: Tuesday, May 3, 2022 8:32 PM
> To: Chin-Ting Kuo
> Subject: Re: [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver
>
> On Thu, Apr 14, 2022 at 4:54 PM Chin-Ting Kuo
> wrote:
> >
> > Add ASPEED BMC
I do not have any non-serial output devices, so a
print_pre_console_buffer(PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL)
does nothing for me.
However, I was manually inspected the pre-console buffer using md.b,
and I noticed that the early part of it was repeated. The reason is
that the first cal
There is currently no support for PRE_CONSOLE_BUFFER in SPL, but if
and when that gets implemented, one would almost certainly want to use
a different address and/or size for the buffer (e.g., U-Boot proper
might specify an address in DRAM and a generous buffer, while SPL
would be much more constra
Hello! I am trying to get u boot running on the samsung-espresso3g
(https://wiki.postmarketos.org/wiki/Samsung_Galaxy_Tab_2_7.0%22_(samsung-espresso3g))
but it gets stuck at the bootsplash (ie the Samsung logo). Here is my
fork https://github.com/MightyM17/u-boot/tree/espresso-dev. Any
guidance on
On Thu, Apr 14, 2022 at 4:54 PM Chin-Ting Kuo
wrote:
>
> Add ASPEED BMC FMC/SPI memory controller driver with
> spi-mem interface for AST2500 and AST2600 platform.
>
> There are three SPI memory controllers embedded in an ASPEED SoC.
> - FMC: Named as Firmware Memory Controller. After AC on, MCU R
Based on reading https://www.msys2.org/docs/ci/ and "Other Systems"
rework how we update MSYS2 to the current version. We run it once, to
perform nothing other than being the first run, then we run pacman
twice.
Signed-off-by: Tom Rini
---
.azure-pipelines.yml | 5 +++--
1 file changed, 3 inser
On Tue, Apr 26, 2022 at 1:54 PM Luca Ellero
wrote:
>
> Since AT45DB641E uses "extended device information" for reading JEDEC ID
> we must first introduce support for this feature.
> All code is borrowed from Linux kernel source code:
> drivers/mtd/devices/mtd_dataflash.c
> commit 1
enable ahab on imx8qm-rom7720
Signed-off-by: Oliver Graute
---
configs/imx8qm_rom7720_a1_4G_defconfig | 1 +
include/configs/imx8qm_rom7720.h | 7 +++
2 files changed, 8 insertions(+)
diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig
b/configs/imx8qm_rom7720_a1_4G_defconfig
index d
From: Jim Liu
Add Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master
controller driver using SPI-MEM interface.
The FIU supports single, dual or quad communication interface.
The FIU controller driver provides flash access in UMA(User
Mode Access) mode by using an indirect address/data mechan
On Wed, Apr 27, 2022 at 9:27 AM wrote:
>
> From: Tien Fong Chee
>
> Add Macronix mx25u51245g flash entry, so this can be used on
> SoCFPGA devices.
>
> Signed-off-by: Tien Fong Chee
> ---
Applied to u-boot-spi/master
From: Peng Fan
Mark wdog1/pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi | 8
board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
Hi
On Tue, May 3, 2022 at 1:44 PM Peng Fan (OSS) wrote:
>
> From: Peng Fan
>
> Drop unused WDOG macro
>
> Signed-off-by: Peng Fan
> ---
> board/engicam/imx8mm/spl.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/board/engicam/imx8mm/spl.c b/board/engicam/imx8mm/spl.c
> index f75f2dc
From: Peng Fan
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
board/toradex/verdin-imx8mp/verdin-imx8mp.c | 11 ---
1 file changed, 11 deletions(-)
diff --git a/board/tor
From: Peng Fan
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
board/toradex/verdin-imx8mm/spl.c | 11 ---
1 file changed, 11 deletions(-)
diff --git a/board/toradex/verdi
From: Peng Fan
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
board/phytec/phycore_imx8mm/spl.c | 19 ---
board/phytec/phycore_imx8mp/spl.c | 19 --
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 4
board/kontron/sl-mx8mm/spl.c | 18 -
From: Peng Fan
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
board/variscite/imx8mn_var_som/spl.c | 11 ---
1 file changed, 11 deletions(-)
diff --git a/board/variscite/
From: Peng Fan
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
board/bsh/imx8mn_smm_s2/spl.c | 11 ---
1 file changed, 11 deletions(-)
diff --git a/board/bsh/imx8mn_smm_s2
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi | 4
board/beacon/imx8mn/spl.c | 10 --
2 files cha
From: Peng Fan
pinctrl_wdog as u-boot,dm-spl already marked in imx8mm-verdin-u-boot.dtsi,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
board/menlo/mx8menlo/mx8menlo.c | 12
1 file changed, 12 deletions(-)
diff --git a/board/menlo/
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mm-venice-u-boot.dtsi | 4
arch/arm/dts/imx8mn-venice-u-boot.dtsi | 4
arch/arm/dts/imx8mp-venic
From: Peng Fan
Drop unused WDOG macro
Signed-off-by: Peng Fan
---
board/engicam/imx8mm/spl.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/board/engicam/imx8mm/spl.c b/board/engicam/imx8mm/spl.c
index f75f2dc634c..1846134a492 100644
--- a/board/engicam/imx8mm/spl.c
+++ b/board/engicam/i
From: Peng Fan
Add pinctrl_wdog.
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
.../dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi | 4
arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 4
board/compulab/imx8mm-cl-iot-gate/spl.c | 19 ---
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 4
board/beacon/imx8mm/spl.c | 19 ---
2
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4
board/freescale/imx8mp_evk/imx8mp_evk.c | 17 -
board/free
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4
board/freescale/imx8mn_evk/spl.c | 19 ---
2 file
From: Peng Fan
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan
---
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 4
board/freescale/imx8mm_evk/spl.c| 19 ---
2 files changed,
From: Peng Fan
Enable pinctrl wdog to clean up board level code
imx_watchdog.c already has function of set_wdog_reset, so after watchdog
driver enabled, no need that.
Note: I only have NXP EVK board, so please help test if possible.
Based on:
https://patchwork.ozlabs.org/project/uboot/cover/20
From: Peng Fan
Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MQ.
Signed-off-by: Peng Fan
---
include/configs/imx8m.h | 10 ++
include/configs/imx8mq_cm.h | 24 +---
include/configs/imx8mq_evk.h | 19 +---
From: Peng Fan
Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MP.
Signed-off-by: Peng Fan
---
include/configs/imx8m.h | 8
include/configs/imx8mp_evk.h | 17 +
include/configs/imx8mp_rsb3720.h | 16 +---
include/configs/imx
From: Peng Fan
Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MN.
Signed-off-by: Peng Fan
---
include/configs/imx8m.h| 10 ++
include/configs/imx8mn_bsh_smm_s2_common.h | 17 +
include/configs/imx8mn_evk.h | 20 +
From: Peng Fan
Some SPL definitions could be gerneralized, so use imx8m.h for that.
i.MX8MN/Q/P will follow up.
Signed-off-by: Peng Fan
---
include/configs/imx8m.h | 29 +
include/configs/imx8mm-cl-iot-gate.h| 17 ++--
include/configs/imx
Hi Josua,
On 03.05.22 09:17, Josua Mayer wrote:
Am 03.05.22 um 09:16 schrieb Stefan Roese:
On 02.05.22 16:18, Josua Mayer wrote:
- prog_eeprom: write_tlvinfo_tlv_eeprom
- update_crc: tlvinfo_update_crc
- is_valid_tlv: is_valid_tlvinfo_entry
- is_checksum_valid: tlvinfo_check_crc
So while cre
Switch to use binman to pack images
Signed-off-by: Oliver Graute
Reviewed-by: Fabio Estevam
Reviewed-by: Simon Glass
---
Changes for v3
-added Reviewed-by
-rebased on master
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 +
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/congatec/cgtqmx8/imximage
Hi Jose,
On Tue, 3 May 2022 at 02:26, Jose Marinho wrote:
>
> Hi Simon,
>
> Thank you for reviewing the draft proposal!
>
> Would you be able to share your review comments on the PDF?
> Currently the document is not in a markup form and is yet to be hosted in a
> repository. That's the intent fo
This converts the following to Kconfig:
CONFIG_MTD_CONCAT
Signed-off-by: Chris Packham
---
This touches octeontx_common.h but only to remove a line that is already
commented out. Other than that etamin was the only board that had this
enabled.
configs/etamin_defconfig | 1 +
drivers/
CONFIG_MVEBU_NAND_BOOT, CONFIG_MVEBU_SPI_BOOT, CONFIG_MVEBU_MMC_BOOT and
CONFIG_MVEBU_UBOOT_DFLT_NAME are unused when CONFIG_CMD_MVEBU_BUBT is not
enabled. So hide them.
Signed-off-by: Pali Rohár
---
cmd/mvebu/Kconfig | 4
1 file changed, 4 insertions(+)
diff --git a/cmd/mvebu/Kconfig b/cm
NVMe support is already enabled, so add it into boot targets.
Signed-off-by: Pali Rohár
---
include/configs/mvebu_armada-37xx.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/mvebu_armada-37xx.h
b/include/configs/mvebu_armada-37xx.h
index 778f8b828aa8..953dfe812558 100644
-
The pca9450 driver uses dm_i2c_{read,write}, which
are (unsurprisingly) only available with DM_I2C. Make sure one can't
create an unbuildable .config by adding proper dependencies.
While here, append "in SPL" to the prompt for the SPL_ variant so it
doesn't read the same as the one for the non-SPL
These are the i2c addresses of the chips, but that comes from device
tree. Having that information duplicated here just adds confusion.
Signed-off-by: Rasmus Villemoes
---
drivers/power/pmic/pca9450.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/power/pmic/pc
Hi Sean,
On Fri, 29 Apr 2022 at 13:40, Sean Anderson wrote:
>
> Hi Simon,
>
> On 4/25/22 11:24 AM, Sean Anderson wrote:
> >
> >
> > On 4/25/22 1:48 AM, Simon Glass wrote:
> >> Hi Sean,
> >>
> >> On Mon, 18 Apr 2022 at 13:37, Sean Anderson wrote:
> >>>
> >>> This adds support for "nvmem cells" as
Some of the DT compatibles have changed upstream so add new DT compatibles
to ensure things continue to keep working if the device trees are
updated.
Signed-off-by: Peter Robinson
---
drivers/i2c/tegra_i2c.c | 1 +
drivers/video/tegra124/dp.c | 1 +
2 files changed, 2 insertions(+)
diff --g
Add new lines to make errorr messages easier to read.
Signed-off-by: Peter Robinson
---
drivers/pci/pci_tegra.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c
index f8d66c0e1c6..bc489d5ec85 100644
--- a/drivers/pci/pci_te
Add new lines for error messages to make them easier to read.
Signed-off-by: Peter Robinson
---
arch/arm/mach-tegra/xusb-padctl-common.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-tegra/xusb-padctl-common.c
b/arch/arm/mach-tegra/xusb-padctl-co
Hi Simon,
Thank you for reviewing the draft proposal!
Would you be able to share your review comments on the PDF?
Currently the document is not in a markup form and is yet to be hosted in a
repository. That's the intent for the long term.
Cheers,
Jose
> -Original Message-
> From: Simon
On 20/04/22, Tom Rini wrote:
> On Wed, Jan 26, 2022 at 04:52:04PM +0100, Oliver Graute wrote:
>
> > Switch to use binman to pack images
> >
> > Signed-off-by: Oliver Graute
> > ---
> > arch/arm/dts/imx8qm-rom7720-a1.dts| 1 +
> > arch/arm/dts/imx8qm-u-boot.dtsi | 133
Switch to use binman to pack images
Signed-off-by: Oliver Graute
---
Changes for v2
- just rebased to master
arch/arm/dts/imx8qm-rom7720-a1.dts| 1 +
arch/arm/dts/imx8qm-u-boot.dtsi | 133 ++
arch/arm/mach-imx/imx8/Kconfig| 1 +
...
Hi Jose,
On Thu, 7 Apr 2022 at 13:23, Jose Marinho wrote:
>
> Hi All,
>
> The topic of information handoff between TF-A’s BL31 and BL33 (e.g. U-boot
> proper, EDK2) was discussed last year in the TF-A and U-boot mailing lists
> [1], [2].
>
> Examples of information to be handed off between firm
On 4/11/22 20:00, Adrian Fiergolski wrote:
This patchset introduces support for the authenticated FPGA images
on ZynqMP boards, besides that introducing common way to pass the
compatible property to any fpga driver.
It bases on the initial work by Jorge Ramirez-Ortiz
https://patchwork.ozlabs
On 4/11/22 20:00, Adrian Fiergolski wrote:
From: Oleksandr Suvorov
Add supporting new compatible string "u-boot,zynqmp-fpga-ddrauth" to
handle loading authenticated images (DDR).
Based on solution by Jorge Ramirez-Ortiz
Signed-off-by: Oleksandr Suvorov
Co-developed-by: Ricardo Salveti
Si
On 4/11/22 20:00, Adrian Fiergolski wrote:
From: Oleksandr Suvorov
Pass an address of xilinx_desc pointer in an fpga_desc into a load()
callback of struct xilinx_fpga_op.
It allows getting parent fpga_desc structure members inside xilinx
fpga drivers.
Signed-off-by: Oleksandr Suvorov
Teste
On 4/11/22 20:00, Adrian Fiergolski wrote:
From: Oleksandr Suvorov
Function definition arguments should also have identifier names.
Add missed ones to struct xilinx_fpga_op callbacks, unifying code.
Signed-off-by: Oleksandr Suvorov
missing your sob line here.
M
---
include/xilinx.h
On 4/11/22 20:00, Adrian Fiergolski wrote:
From: Oleksandr Suvorov
Introduce a function which passes an fpga compatible string from
FIT images to FPGA drivers. This lets the different implementations
decide how to handle it.
Some code of Jorge Ramirez-Ortiz is reused.
Signed-off-by: Oleks
pá 29. 4. 2022 v 11:52 odesílatel Michal Simek napsal:
>
> board_get_usable_ram_top() was designed for getting the top most location
> for U-Boot allocation that's why function itself supports via total_size
> parameter to find out where the right location for U-Boot is.
> But function itself is a
Am 03.05.22 um 09:16 schrieb Stefan Roese:
On 02.05.22 16:18, Josua Mayer wrote:
- prog_eeprom: write_tlvinfo_tlv_eeprom
- update_crc: tlvinfo_update_crc
- is_valid_tlv: is_valid_tlvinfo_entry
- is_checksum_valid: tlvinfo_check_crc
So while creating a new API it makes sense to prepend the func
st 27. 4. 2022 v 10:30 odesílatel Michal Simek napsal:
>
> From: T Karthik Reddy
>
> This reverts commit 122ca834f2f4a9d70abeece3d1ff200a3556ab24.
>
> Disable CONFIG_ZYNQMP_FIRMWARE config from zynqmp & versal mini emmc
> defconfig files, as mini emmc does not use any firmware.
>
> Signed-off-by:
st 27. 4. 2022 v 10:27 odesílatel Michal Simek napsal:
>
> From: T Karthik Reddy
>
> zynqmp_pm_is_function_supported() which checks feature support on som,
> which is implemented in firmware_zynqmp.c driver. As mini configuration
> does not use firmware driver, so create a weak function to avoid
On 03.05.22 06:14, Peng Fan (OSS) wrote:
From: Peng Fan
Since these boards has CONFIG_DM_SERIAL and/or CONFIG_SPL_DM_SERIAL,
the legacy macro no need to be defined.
Reviewed-by: Heiko Schocher
Reviewed-by: Fabio Estevam
Signed-off-by: Peng Fan
For tbs2910:
Acked-by: Soeren Moch
Thanks
97 matches
Mail list logo
