[U-Boot] [PATCH] ARM: imx6q_logic: Correct phy fixup for broken ethernet

The Ethernet has been broken for some time. This patch unifies this board with a few others that use a similar approach to enabling phy. This fixes ar8031 Ethernet controller so it works. Signed-off-by: Adam Ford diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c inde

[U-Boot] [PATCH] ARM: imx6q_logic: Enable SPL Booting from NAND

This patch fixes a few values that were incorrect, and this now lets SPL boot from NAND. Signed-off-by: Adam Ford diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 457366a664..f56f532631 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig

Re: [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time

> Am 12.01.2019 um 22:32 schrieb Simon Glass : > > Hi Alex, > >> On Fri, 11 Jan 2019 at 00:57, Alexander Graf wrote: >> >> >> >>> On 11.01.19 05:29, AKASHI Takahiro wrote: >>> Alex, Heinrich and Simon, >>> >>> Thank you for your comments, they are all valuable but also make me >>> confused

Re: [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation

Hi Alex, > On Tue, Jan 8, 2019 at 11:24 PM Lukasz Majewski wrote: > > > > Hi Alex, > > > > > On Tue, Jan 8, 2019 at 10:52 PM Lukasz Majewski > > > wrote: > > > > > > > > Hi Alex, > > > > > > > > > On Thu, Dec 27, 2018 at 3:49 PM Tom Rini > > > > > wrote: > > > > > > > > > > > > On Tue,

Re: [U-Boot] [PATCH] common: Kconfig: miscellaneous spelling fixes

On Thu, 10 Jan 2019 at 19:31, Chris Packham wrote: > > Signed-off-by: Chris Packham > --- > > common/Kconfig | 10 +- > 1 file changed, 5 insertions(+), 5 deletions(-) Thanks. Reviewed-by: Simon Glass ___ U-Boot mailing list U-Boot@lists.den

Re: [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time

Hi Alex, On Fri, 11 Jan 2019 at 00:57, Alexander Graf wrote: > > > > On 11.01.19 05:29, AKASHI Takahiro wrote: > > Alex, Heinrich and Simon, > > > > Thank you for your comments, they are all valuable but also make me > > confused as different people have different requirements :) > > I'm not sure

Re: [U-Boot] [PATCH v2 1/7] efi_loader: Add a wchar_t cast in efi_file_open()

On Fri, 11 Jan 2019 at 13:35, Heinrich Schuchardt wrote: > > On 1/11/19 9:08 PM, Heinrich Schuchardt wrote: > > On 1/8/19 12:44 AM, Simon Glass wrote: > >> The printf() string here is not actually correct. Add a cast to avoid > >> a warning when checking is enabled. > >> > >> Signed-off-by: Simon

Re: [U-Boot] [PATCH] Makefile: run CONFIG_BOARD_SIZE_LIMIT against .img

On Fri, 11 Jan 2019 at 12:56, Simon Goldschmidt wrote: > > With the current Makefile, CONFIG_BOARD_SIZE_LIMIT is used to check > the U-Boot binary without devicetree only. This produces wrong results > when OF_SEPARATE is used. > > To fix this, run the CONFIG_BOARD_SIZE_LIMIT check on all .img bin

Re: [U-Boot] [PATCH 1/1] efi_loader: use u16* for file name

On Fri, 11 Jan 2019 at 13:27, Heinrich Schuchardt wrote: > > UTF-16 strings in our code should all be u16 *. Fix an inconsistency for > file names which may lead to a warning for printf("%ls", ). > > Simon Glass > Signed-off-by: Heinrich Schuchardt > --- > include/efi_api.h | 2 +- > l

Re: [U-Boot] [PULL] u-boot-socfpga/master

On Fri, Jan 11, 2019 at 03:52:29PM +0100, Marek Vasut wrote: > The following changes since commit 64abfc9b6bb3721621d5132e112ae2e91c57d8bb: > > Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2019-01-10 > 09:28:28 -0500) > > are available in the Git repository at: > > git://git.den

Re: [U-Boot] [PATCH] Revert "fs: fat: assign rootdir sector when accessing root directory"

On Fri, Jan 11, 2019 at 10:17:21AM -0500, Tom Rini wrote: > This particular commit is causing a regression on stih410-b2260 and > other platforms when reading from FAT16. Noting that I had rebased the > original fix from Thomas onto then-current master, there is also > question from Akashi-san if

Re: [U-Boot] [PULL] u-boot-usb/master

On Fri, Jan 11, 2019 at 03:51:17PM +0100, Marek Vasut wrote: > UDC fixes below, this is for coming 2019.01 release. > There's a lot of churn, however most are just renames. > > The following changes since commit 54707a942009fae083dd78b58ff057127ba0e900: > > Prepare v2019.01-rc3 (2019-01-07 22:

Re: [U-Boot] Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before relocation"

On Wed, Jan 09, 2019 at 11:05:02PM +0100, Lukasz Majewski wrote: > This reverts commit a7f4b4b344396590845e6552c82829ef68ef9f89. > > As reported by Alex Kiernan the above optimization introduces a > regression in the below use case where: > > 1. Device has defined 'u-boot,dm-spl' property (@ eMM

Re: [U-Boot] [PATCH v7 0/6] MSCC: Add Jaguar2 SOC family

Am 12.01.19 um 18:56 schrieb Horatiu Vultur: > This patch series add support for MSCC Jaguar2 SOC family. In this > family there are the following boards: Jagaur2(pcb110), > Jaguar2-48(pcb111) and Serval2(pcb112). > > This is based off the u-boot-mips/next repository > > This version address co

[U-Boot] [PATCH 5/5] MIPS: bmips: switch to CONFIG_OF_SEPARATE

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Based on https://patchwork.ozlabs.org/patch/1019791/ Signed-off-by: Álvaro Fernández Rojas Signed-off-by: Daniel Schwierzeck --- configs/bcm968380gerg_ram_defconfig | 1 - configs/comtrend_ar5315u_ram_defconfig | 1 -

[U-Boot] [PATCH 3/5] MIPS: pic32mzdask: switch to CONFIG_OF_SEPARATE

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck --- configs/pic32mzdask_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig index de699fc275..d411031bd7 100644 --- a/confi

[U-Boot] [PATCH 4/5] MIPS: xilfpga: switch to CONFIG_OF_SEPARATE

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck --- configs/imgtec_xilfpga_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/imgtec_xilfpga_defconfig b/configs/imgtec_xilfpga_defconfig index 4fe75311de..cea6424780 100644 --

[U-Boot] [PATCH 2/5] MIPS: malta: switch to CONFIG_OF_SEPARATE

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck --- configs/malta64_defconfig | 1 - configs/malta64el_defconfig | 1 - configs/malta_defconfig | 1 - configs/maltael_defconfig | 1 - 4 files changed, 4 deletions(-) diff --git a/conf

[U-Boot] [PATCH 1/5] MIPS: boston: switch to CONFIG_OF_SEPARATE

Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck --- configs/boston32r2_defconfig | 1 - configs/boston32r2el_defconfig | 1 - configs/boston32r6_defconfig | 1 - configs/boston32r6el_defconfig | 1 - configs/boston64r2_defconfig | 1 -

[U-Boot] [PATCH 0/5] MIPS: fix Kconfig warnings about CONFIG_OF_EMBED

Only boot-tested on Malta with Qemu. But there is no ovious reason why it should break any MIPS board. Daniel Schwierzeck (5): MIPS: boston: switch to CONFIG_OF_SEPARATE MIPS: malta: switch to CONFIG_OF_SEPARATE MIPS: pic32mzdask: switch to CONFIG_OF_SEPARATE MIPS: xilfpga: switch to CON

[U-Boot] [PATCH v7 6/6] MSCC: Add board support for Jaguar2 SOC family

Add board support and configuration for Jaguar2 SOC family. The detection of the board type in this family is based on the phy ids. Signed-off-by: Horatiu Vultur --- arch/mips/dts/Makefile | 1 + arch/mips/mach-mscc/Makefile | 5 +- board/mscc/common/Makefile | 4 ++ board/mscc/com

[U-Boot] [PATCH v7 5/6] MSCC: add device tree for Serval2 board

Add device tree based on evaluation board pcb112. Signed-off-by: Horatiu Vultur --- MAINTAINERS | 1 + arch/mips/dts/serval2_pcb112.dts | 60 2 files changed, 61 insertions(+) create mode 100644 arch/mips/dts/serval2_pcb112.dts dif

[U-Boot] [PATCH v7 4/6] MSCC: Add device tree for Jaguar2-48 board

Add device tree based on evaluation board pcb111. Signed-off-by: Horatiu Vultur --- arch/mips/dts/jr2_pcb111.dts | 74 1 file changed, 74 insertions(+) create mode 100644 arch/mips/dts/jr2_pcb111.dts diff --git a/arch/mips/dts/jr2_pcb111.dts b/arch/

[U-Boot] [PATCH v7 3/6] MSCC: Add device tree for Jaguar2 board

Add device tree based on evaluation board pcb110. Signed-off-by: Horatiu Vultur --- MAINTAINERS | 1 + arch/mips/dts/jr2_pcb110.dts | 74 + arch/mips/dts/mscc,jr2.dtsi | 187 +++ 3 files changed, 262 insertions(+) crea

[U-Boot] [PATCH v7 2/6] MSCC: Add support for Jaguar2 SOC family

As the Ocelot and Luton SoCs, this family of SoCs are found in Microsemi Switches solution. Signed-off-by: Horatiu Vultur --- arch/mips/mach-mscc/Kconfig| 9 + arch/mips/mach-mscc/cpu.c | 7 + arch/mips/mach-mscc/dram.c

[U-Boot] [PATCH v7 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family

The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common to support new numbe of pins and remove any platform dependency from mscc-common. Signed-off-by: Horatiu Vultur --- MAINTAINERS | 1 + drivers/pinctrl/mscc/Kconfig | 9 + drivers/pinct

[U-Boot] [PATCH v7 0/6] MSCC: Add Jaguar2 SOC family

This patch series add support for MSCC Jaguar2 SOC family. In this family there are the following boards: Jagaur2(pcb110), Jaguar2-48(pcb111) and Serval2(pcb112). This is based off the u-boot-mips/next repository This version address comments from Daniel Schwierzeck v7-changes: - fix nits in p

Re: [U-Boot] [PATCH v2 2/3] arm: socfpga: gen5 enable designware_socfpga

On 1/12/19 5:01 PM, Simon Goldschmidt wrote: > Am 11.01.2019 um 23:04 schrieb Marek Vasut: >> On 1/11/19 8:45 PM, Simon Goldschmidt wrote: >>> Enable the socfpga specific designware ethernet driver for all Gen5 >>> and Arria10 defconfigs. >>> >>> This is required to remove the hacky reset and phy m

Re: [U-Boot] [PATCH v3 0/3] mips: spi: mscc: Add fast bitbang SPI driver

Am 08.01.19 um 10:38 schrieb Lars Povlsen: > These 3 patches add an optimized SPI bitbang driver for MSCC SOCs that > does not sport the designware SPI hardware controller. > > The driver more than doubles the performance for bulk SPI transfers. > > This is based off the u-boot-mips/next reposi

Re: [U-Boot] [PATCH 2/2] mmc: jz_mmc: Compile-out write support if disabled

Am 07.01.19 um 22:13 schrieb Ezequiel Garcia: > Do not build write support, unless it's enabled. > > In the SPL case, this change will typically remove > precious bytes (as write support is most often > not needed in SPL). > > This is important on this platform, where the maximum > SPL size is

Re: [U-Boot] [PATCH 1/2] mmc: Use proper IS_ENABLED macro to check block support

Am 07.01.19 um 22:13 schrieb Ezequiel Garcia: > Use CONFIG_IS_ENABLED(BLK) instead of CONFIG_BLK, > in order to fix the following build issues when > CONFIG_SPL_MMC_WRITE is selected: > > drivers/mmc/mmc_write.c:69:7: error: conflicting types for 'mmc_berase' > ulong mmc_berase(struct udevice *

Re: [U-Boot] [PATCH] net: bcm6368: fix restart flow issues

Am 01.01.19 um 19:44 schrieb Álvaro Fernández Rojas: > Correctly enable/disable bcm6368-net controller to avoid flow issues. > > Signed-off-by: Álvaro Fernández Rojas > --- > drivers/net/bcm6368-eth.c | 109 > ++ > 1 file changed, 62 insertions(+),

Re: [U-Boot] [PATCH v6 6/6] MSCC: Add board support for Jaguar2 SOC family

Am 11.01.19 um 23:31 schrieb Horatiu Vultur: > Add board support and configuration for Jaguar2 SOC family. > The detection of the board type in this family is based on the phy ids. > > Signed-off-by: Horatiu Vultur > --- > arch/mips/dts/Makefile | 1 + > arch/mips/mach-mscc/Makefile |

Re: [U-Boot] [PATCH v6 2/6] MSCC: Add support for Jaguar2 SOC family

Am 11.01.19 um 23:31 schrieb Horatiu Vultur: > As the Ocelot and Luton SoCs, this family of SoCs are found > in Microsemi Switches solution. > > Signed-off-by: Horatiu Vultur > --- > arch/mips/mach-mscc/Kconfig| 9 + > arch/mips/mach-mscc/cpu.c

Re: [U-Boot] [PATCH v6 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family

Am 11.01.19 um 23:31 schrieb Horatiu Vultur: > The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common > to support new numbe of pins and remove any platform dependency from > mscc-common. > > Signed-off-by: Horatiu Vultur > --- > MAINTAINERS | 1 +

Re: [U-Boot] [PATCH v2 2/3] arm: socfpga: gen5 enable designware_socfpga

Am 11.01.2019 um 23:04 schrieb Marek Vasut: On 1/11/19 8:45 PM, Simon Goldschmidt wrote: Enable the socfpga specific designware ethernet driver for all Gen5 and Arria10 defconfigs. This is required to remove the hacky reset and phy mode handling in arch/arm/mach-socfpga. Signed-off-by: Simon G

[U-Boot] [PATCH 1/1] powerpc: enabled building with CONFIG_DM=y

Moving to the driver model requires CONFIG_DM to be enabled. Currently several boards like kmeter1_defconfig produce a build error when CONFIG_DM is enabled: In file included from include/common.h:35, from ./arch/powerpc/include/asm/fsl_lbc.h:10, from include/mpc8

[U-Boot] [PATCH 1/1] efi_loader: consistent build flags for EFI applications

At the same time adding and removing the -Os flag does not make any sense. Actually it leads to -Os not being used. Signed-off-by: Heinrich Schuchardt --- lib/efi_loader/Makefile | 2 +- lib/efi_selftest/Makefile | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/efi_

[U-Boot] [PATCH] MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma static

mxs_nand_init_dma is only referenced from mxs_nand.c. It's not referenced in any headers or outside code, so this patch defines it as static. Signed-off-by: Adam Ford diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c index e3341812a2..82bd03868a 100644 --- a/drivers

[U-Boot] [PATCH 1/1] efi_loader: use u16* for file name

UTF-16 strings in our code should all be u16 *. Fix an inconsistency for file names which may lead to a warning for printf("%ls", ). Simon Glass Signed-off-by: Heinrich Schuchardt --- v2 additionally correct efi_selftest_block_device.c --- include/efi_api.h|

[U-Boot] [PATCH 1/1] disk: efi: GUIDs should be const

Make system_guid const. Signed-off-by: Heinrich Schuchardt --- disk/part_efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/disk/part_efi.c b/disk/part_efi.c index d6bb53e6b5..239455b816 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -66,7 +66,7 @@ static char *prin

[U-Boot] [PATCH 2/2] mach-snapdragon: db410: pinctrl: fix pin count

Pin count in APQ8016 was wrong, fix that. Fixes: ad97051b7ff6 ("mach-snapdragon: Introduce pinctrl driver") Signed-off-by: Ramon Fried --- arch/arm/mach-snapdragon/pinctrl-apq8016.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-snapdragon/pinctrl-apq801

[U-Boot] [PATCH 1/2] dts: db410: fix indentation

Signed-off-by: Ramon Fried --- arch/arm/dts/dragonboard410c-uboot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi index a07c97e811..9c1be2566f 100644 --- a/arch/arm/dts/dragonboard410c-ubo

[U-Boot] [PATCH v1 2/5] arm: mach-snapdragon: add pinctrl driver for db820c

Add pinctrl driver for Dragonboard820c, currently with only one mux func to initialize pins for serial console. Signed-off-by: Ramon Fried --- arch/arm/mach-snapdragon/Makefile | 5 +- arch/arm/mach-snapdragon/pinctrl-apq8096.c| 56 +++ arch/arm/mach-snapdragon/

[U-Boot] [PATCH v1 4/5] arm: mach-snapdragon: pinctrl: clarify gpio disable bit

The TLMM_GPIO_ENABLE bit is actually use to disable the GPIO. change it to TLMM_GPIO_DISABLE so it's clearer. Signed-off-by: Ramon Fried --- arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-snapdragon/pinctrl-sna

[U-Boot] [PATCH v1 5/5] dts: 820c: Add pinctrl node and uart mux

* Add pinctrl node for TLMM and add mux request for uart node. * Rename uart to the actual board uart port. * Fix indentendation of sdhc2 node. Signed-off-by: Ramon Fried --- arch/arm/dts/dragonboard820c-uboot.dtsi | 10 - arch/arm/dts/dragonboard820c.dts| 29 +++

[U-Boot] [PATCH v1 1/5] arm: mach-snapdragon: db820c: Actually init PLL for serial

The PLL for the UART was not set, and relied on previous initializtion made by LK. add the appropriate initialization. Signed-off-by: Ramon Fried --- arch/arm/mach-snapdragon/clock-apq8096.c | 34 +++ .../include/mach/sysmap-apq8096.h | 9 + 2 files changed

[U-Boot] [PATCH v1 3/5] configs: dragonboard820c: Enable pinctrl/mux config

Signed-off-by: Ramon Fried --- configs/dragonboard820c_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig index d1e0b77717..20a6ba9b61 100644 --- a/configs/dragonboard820c_defconfig +++ b/configs/dragonboard820c_

[U-Boot] [PATCH v1 0/5] db820: Add missing initialization for uart

Uart was lacking initialization of pinctrl & PLL's and relied on previous initialization from LK. Fix that. Ramon Fried (5): arm: mach-snapdragon: db820c: Actually init PLL for serial arm: mach-snapdragon: add pinctrl driver for db820c configs: dragonboard820c: Enable pinctrl/mux config a

Re: [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation

On Tue, Jan 8, 2019 at 11:24 PM Lukasz Majewski wrote: > > Hi Alex, > > > On Tue, Jan 8, 2019 at 10:52 PM Lukasz Majewski wrote: > > > > > > Hi Alex, > > > > > > > On Thu, Dec 27, 2018 at 3:49 PM Tom Rini > > > > wrote: > > > > > > > > > > On Tue, Dec 18, 2018 at 12:30:50PM +0100, Lukasz Majewsk