Uart was lacking initialization of pinctrl & PLL's and relied on previous initialization from LK. Fix that.
Ramon Fried (5): arm: mach-snapdragon: db820c: Actually init PLL for serial arm: mach-snapdragon: add pinctrl driver for db820c configs: dragonboard820c: Enable pinctrl/mux config arm: mach-snapdragon: pinctrl: clarify gpio disable bit dts: 820c: Add pinctrl node and uart mux arch/arm/dts/dragonboard820c-uboot.dtsi | 10 +++- arch/arm/dts/dragonboard820c.dts | 29 +++++++--- arch/arm/mach-snapdragon/Makefile | 5 +- arch/arm/mach-snapdragon/clock-apq8096.c | 34 +++++++++++ .../include/mach/sysmap-apq8096.h | 9 +++ arch/arm/mach-snapdragon/pinctrl-apq8096.c | 56 +++++++++++++++++++ arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 6 +- arch/arm/mach-snapdragon/pinctrl-snapdragon.h | 1 + configs/dragonboard820c_defconfig | 2 + 9 files changed, 139 insertions(+), 13 deletions(-) create mode 100644 arch/arm/mach-snapdragon/pinctrl-apq8096.c -- 2.20.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
