On 25.07.2018 08:40, Michal Simek wrote:
On 25.7.2018 08:26, Simon Goldschmidt wrote:
On 24.07.2018 15:07, Michal Simek wrote:
There is no reason to limit gzip usage only for OS_BOOT and kernel image
type. >
Signed-off-by: Michal Simek
---
common/spl/spl_fit.c | 5 +
1 file changed
On Tue, Jul 24, 2018 at 07:47:48PM -0400, nom...@palism.com wrote:
> From: Nomble
>
> Signed-off-by: Nomble
> Signed-off-by: Caliph Nomble
> ---
> lib/rsa/rsa-sign.c | 13 +++--
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/lib/rsa/rsa-sign.c b/lib/rsa/rsa-sign.c
On Wed, Jul 25, 2018 at 12:55 AM, Adam Ford wrote:
> I am trying to boot an i.MX6Q via SPL to U-Boot and eventually, use
> Falcon mode to start the kernel. I can boot via SPL over USB. I have
> enabled the NAND and SPL NAND, and i can confirm that mxs_nand_spl.c
> is being built in. The board i
On 25.7.2018 08:26, Simon Goldschmidt wrote:
>
>
> On 24.07.2018 15:07, Michal Simek wrote:
>> There is no reason to limit gzip usage only for OS_BOOT and kernel image
>> type. >
>> Signed-off-by: Michal Simek
>> ---
>>
>> common/spl/spl_fit.c | 5 +
>> 1 file changed, 1 insertion(+), 4 d
On 24.7.2018 21:56, Stefan Herbrechtsmeier wrote:
> Am 24.07.2018 um 12:31 schrieb Michal Simek:
>> On 23.7.2018 20:42, Stefan Herbrechtsmeier wrote:
>>> Am 23.07.2018 um 13:43 schrieb Michal Simek:
Reading registers for finding out output value is not working because
input value is read
On Wed, 2018-07-18 at 16:48 +0200, Michal Simek wrote:
> On 6.7.2018 10:28, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > This is file system generic loader which can be used to load
> > the file image from the storage into target such as memory.
> > The consumer driver wo
On 24.07.2018 15:07, Michal Simek wrote:
There is no reason to limit gzip usage only for OS_BOOT and kernel image
type. >
Signed-off-by: Michal Simek
---
common/spl/spl_fit.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
On 24.7.2018 21:39, Stefan Herbrechtsmeier wrote:
> Am 24.07.2018 um 10:37 schrieb Michal Simek:
>> On 23.7.2018 20:29, Stefan Herbrechtsmeier wrote:
>>> Am 23.07.2018 um 11:08 schrieb Michal Simek:
On 20.7.2018 21:31, Stefan Herbrechtsmeier wrote:
> Am 12.07.2018 um 16:04 schrieb Michal S
On 24.7.2018 21:54, Marek Vasut wrote:
> On 07/24/2018 04:38 PM, Michal Simek wrote:
>> Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files
>> and point to origin internal board name.
>>
>> Signed-off-by: Michal Simek
>> ---
>
> [...]
>
>> diff --git a/arch/arm/dts/avnet-ult
On 24.7.2018 18:26, York Sun wrote:
> On 07/24/2018 06:07 AM, Michal Simek wrote:
>> There is no reason to limit gzip usage only for OS_BOOT and kernel image
>> type.
>>
>> Signed-off-by: Michal Simek
>> ---
>>
>> common/spl/spl_fit.c | 5 +
>> 1 file changed, 1 insertion(+), 4 deletions(-)
>
On Tue, 2018-07-24 at 12:52 +0200, Marek Vasut wrote:
> On 07/24/2018 10:10 AM, Chee, Tien Fong wrote:
> >
> > On Mon, 2018-07-23 at 11:46 +0200, Marek Vasut wrote:
> > >
> > > On 07/23/2018 10:20 AM, tien.fong.c...@intel.com wrote:
> > > >
> > > >
> > > > From: Tien Fong Chee
> > > >
> > > >
Adding distro_bootcmd support bumps the default environment size over
4500. Increase to SZ_16K to allow for room to grow in the future.
Acked-by: Lukasz Majewski
Signed-off-by: Vagrant Cascadian
---
Changes in v2:
- Change from 16384 to SZ_16K, as suggested by Minkyu Kang.
include/configs/od
The default value with distro_bootcmd is 2 seconds, which is
reasonably fast, and provides a consistent experience across platforms
supporting distro_bootcmd.
The current bootdelay value of 0 seconds is a bit challenging to
interrupt when desired.
Acked-by: Lukasz Majewski
Signed-off-by: Vagran
Enable distro_bootcmd for a standardized boot process across multiple
platforms.
Acked-by: Lukasz Majewski
Signed-off-by: Vagrant Cascadian
---
Changes in v2: None
include/configs/odroid.h | 11 +--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/include/configs/odroid.h
Replace non-standard variable names kerneladdr, initrdaddr and fdtaddr
with kernel_addr_r, ramdisk_addr_r and fdt_addr_r, as documented in
u-boot README.
Acked-by: Lukasz Majewski
Signed-off-by: Vagrant Cascadian
---
Changes in v2: None
include/configs/odroid.h | 24 +++-
Switch odroid platform to use distro_bootcmd, adjusting to use
standardized environment variable names, and use the default
bootdelay.
The additional environment variables from distro_bootcmd requires
increasing the default environment size, which would break backwards
compatibility with saved en
Hi Peng,
On 24 July 2018 at 19:51, Peng Fan wrote:
> Hi Simon,
>
>> -Original Message-
>> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
>> Sent: 2018年7月25日 10:45
>> To: Peng Fan
>> Cc: U-Boot Mailing List ; dl-linux-imx
>> ; Masahiro Yamada ;
>> Tom Rini
>> Sub
Hi Alex,
On 10 July 2018 at 14:06, Alexander Graf wrote:
>
>
>
> On 10.07.18 23:04, Alexander Graf wrote:
> >
> >
> > On 10.07.18 22:55, Tom Rini wrote:
> >> On Tue, Jul 10, 2018 at 06:06:56PM +0200, Alexander Graf wrote:
> >>
> >>> Hi Tom,
> >>>
> >>> This is my current patch queue for efi. Ple
Hi Peng,
On Wed, Jul 25, 2018 at 12:02 AM, Peng Fan wrote:
> I was not aware of this place. I am not sure, because there is also a
> Documentation/devicetree/bindings/ directory.
Yes, currently we have only a few bindings inside
Documentation/devicetree/bindings/.
Most of the bindings are ins
Hi Joe,
Can you please review these changes ?
Regards,
Pankaj Bansal
> -Original Message-
> From: Prabhakar Kushwaha
> Sent: Thursday, July 19, 2018 9:06 AM
> To: Pankaj Bansal ; u-boot@lists.denx.de
> Cc: Priyanka Jain ; Varun Sethi
> ; York Sun ;
> joe.hershber...@ni.com
> Subject: RE:
Hi Fabio,
> -Original Message-
> From: Fabio Estevam [mailto:feste...@gmail.com]
> Sent: 2018年7月25日 10:59
> To: Peng Fan
> Cc: Simon Glass ; U-Boot-Denx ;
> dl-linux-imx ; Breno Matheus Lima
> Subject: Re: [U-Boot] [PATCH V2] drivers: regulator: fixed: add u-boot,
> off-on-delay-us
>
>
Hi Peng,
On Tue, Jul 24, 2018 at 5:11 AM, Peng Fan wrote:
> .../devicetree/bindings/regulator/fixed-regulator.txt| 16
>
> drivers/power/regulator/fixed.c | 6 ++
> 2 files changed, 22 insertions(+)
> create mode 100644
> Documentation/devic
Hi Simon,
> -Original Message-
> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
> Sent: 2018年7月25日 10:46
> To: Peng Fan
> Cc: U-Boot Mailing List ; dl-linux-imx
> ; Sébastien Szymanski
> ; Stefano Babic
> Subject: Re: [PATCH 1/4] configs: opos6uldev: undef CONFIG
Hi Simon,
> -Original Message-
> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
> Sent: 2018年7月25日 10:45
> To: Peng Fan
> Cc: U-Boot Mailing List ; dl-linux-imx
> ; Masahiro Yamada ;
> Tom Rini
> Subject: Re: [PATCH] tools: genboardscfg: move buildman path to fir
On 24 July 2018 at 08:31, Fabrice Gasnier wrote:
> Add ADC device tree node. This allows to get analog conversions on
> stm32mp157.
>
> Signed-off-by: Fabrice Gasnier
> ---
>
> Changes in v2: None
>
> ---
> arch/arm/dts/stm32mp157.dtsi | 32
> 1 file changed, 32
On 24 July 2018 at 01:45, Peng Fan wrote:
> This is to test power_domain_on in device_probe.
> If the device has a power-domain property, enable it
> when probe the device. So add the test to check
> whether it is powered on or not.
>
> Signed-off-by: Peng Fan
> Cc: Simon Glass
> ---
> test/dm/
On 24 July 2018 at 01:45, Peng Fan wrote:
> Enable power domain associated with the device when probe.
>
> Signed-off-by: Peng Fan
> Cc: Simon Glass
> ---
> drivers/core/device.c | 7 +++
> 1 file changed, 7 insertions(+)
Reviewed-by: Simon Glass
__
Hi,
On 23 July 2018 at 19:45, AKASHI Takahiro wrote:
> On Mon, Jul 23, 2018 at 07:56:58PM -0400, Tom Rini wrote:
>> On Mon, Jul 23, 2018 at 05:48:13PM -0600, Simon Glass wrote:
>> > Hi,
>> >
>> > On 20 July 2018 at 11:35, Heinrich Schuchardt wrote:
>> > > On 07/20/2018 04:57 AM, AKASHI Takahiro
On 24 July 2018 at 02:11, Peng Fan wrote:
> Add u-boot,off-on-delay-us for fixed regulator.
>
> Depends on board design, the gpio regulator sometimes
> connects with a big capacitance. When need to off, then
> on the regulator, if there is no enough delay,
> the voltage does not drop to 0, so intr
Hi Peng,
On 24 July 2018 at 01:45, Peng Fan wrote:
> Because CONFIG_POWER_DOMAIN is enabled in defconfig,
> however driver/power/domain is not built for SPL, there is build
> failure when power_domain_on added to device_probe.
> Because power domain is not needed in SPL, let's undef it.
>
> Signe
Hi Peng,
On 24 July 2018 at 01:45, Peng Fan wrote:
> Add dummy functions when CONFIG_POWER_DOMAIN not defined.
>
> Signed-off-by: Peng Fan
> Reviewed-by: Simon Glass
> ---
> include/power-domain.h | 28
> 1 file changed, 28 insertions(+)
>
> diff --git a/include/po
On 24 July 2018 at 08:31, Fabrice Gasnier wrote:
> Add clk_valid() to check for optional clocks are valid.
> Call clk_valid() in test/dm/clk.c and add relevant test routine to
> sandbox clk tests.
>
> Signed-off-by: Fabrice Gasnier
> ---
>
> Changes in v2:
> - add test case for 'clk_valid()', e.g
On 24 July 2018 at 08:31, Fabrice Gasnier wrote:
> device_get_supply_regulator() only needs to be called once.
> But each time there's call to adc_vxx_value() for instance, it calls
> adc_vxx_platdata_update() -> device_get_supply_regulator().
>
> So, move device_get_supply_regulator() to pre_prob
Hi Peng,
On 24 July 2018 at 00:27, Peng Fan wrote:
> To system which has kconfiglib installed, genboardscfg will
> use system kconfiglib, we need it use U-Boot owned version,
> so move the buildman path to first.
>
> Signed-off-by: Peng Fan
> Cc: Masahiro Yamada
> Cc: Simon Glass
> Cc: Tom Rin
On 24 July 2018 at 02:58, Patrick Delaunay wrote:
>
> This reverts commit bc882f5d5c7b4d6ed5e927bf838863af43c786e7.
> because this patch adds the probe of LED driver during the
> binding phasis. It is not allowed in driver model because
> the drivers (clock, pincontrol) needed by the LED driver ca
On Tuesday, July 24, 2018 2:45:42 AM PDT Marek Vasut wrote:
> External Email
>
> On 07/24/2018 08:25 AM, Aaron Williams wrote:
> > On Monday, July 23, 2018 11:15:59 PM PDT Aaron Williams wrote:
> >> External Email
> >>
> >> Hi all,
> >>
> >> It looks like after a certain amount of data has been
On Sun, Jul 22, 2018 at 01:34:13PM +0200, Heinrich Schuchardt wrote:
> Check the parameters of efi_file_open().
>
> Signed-off-by: Heinrich Schuchardt
> ---
> Hello Takahiro,
>
> this patch is necessary to become more UEFI compliant. But it interferes
> with your FAT patch series.
>
> You might
Hi Troy,
> -Original Message-
> From: Troy Kisky [mailto:troy.ki...@boundarydevices.com]
> Sent: 2018年7月25日 2:27
> To: Fabio Estevam ; Peng Fan
> Cc: Fabio Estevam ; U-Boot-Denx
> ; dl-linux-imx
> Subject: Re: [U-Boot] [PATCH V2 29/32] fsl_esdhc: Update usdhc driver to
> support i.MX8
>
"default" lines in Kconfig are processed in order, the first hit will
stop considering subsequent lines. In the case of the DRAM_ODT_EN symbol
that means that everything following the first two lines will never be
checked:
config DRAM_ODT_EN
bool "sunxi dram odt enable"
Even though the exception vector table is a fundamental part of the ARM
architecture, U-Boot mostly does not make real use of it, except when
crash dumping. But having it in takes up quite some space, partly due to
the architectural alignment requirement of 2KB. Since we don't take special
care of
These two patches try to address the issue that the default ARMv8
exception vectors take up quite some code space, but don't provide much
benefit apart from a crash dump. Since the overhead might not be justified
for some very size-restricted SPLs, we try to reduce the code size:
- Patch 1/2 stuffs
The arm64 exception handling code is quite big, mostly due to
architectural alignment requirements. Each exception entry spans 32
instructions, which sounds generous, but is too small to fit all of the
save/branch/restore code in there. So at the moment we use only four
instructions, branching into
Hi Tom,
Please pull UniPhier updates + Kconfig warning fix.
Thanks.
The following changes since commit 323a73adc9a1bf2de43fe03bdd9c3038ce7c2784:
mtd: nand: add new enum for storing ECC algorithm (2018-07-23 14:33:21 -0400)
are available in the git repository at:
git://git.denx.de/u-boot
From: Nomble
Signed-off-by: Nomble
Signed-off-by: Caliph Nomble
---
lib/rsa/rsa-sign.c | 13 +++--
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/lib/rsa/rsa-sign.c b/lib/rsa/rsa-sign.c
index cfe09cc94c..ab8572894d 100644
--- a/lib/rsa/rsa-sign.c
+++ b/lib/rsa/rsa-sign.c
2018-07-06 5:55 GMT+09:00 Luis Araneda :
> cherry-pick kernel commit 2ae89c7 (2018-06-05)
> to avoid warnings when compiling with GCC 8.1
>
> In file included from scripts/kconfig/zconf.tab.c:2486:
> scripts/kconfig/confdata.c: In function ‘conf_write’:
> scripts/kconfig/confdata.c:771:22: warning:
2018-07-20 21:47 GMT+09:00 Masahiro Yamada :
> Switch to the distro boot for UniPhier platform.
>
> - Remove the environment vairalbes used to load images from raw
>block devices.
>
> - Keep the command to download images via tftp. This will be
>useful to boot the kernel when no valid ke
2018-07-19 10:13 GMT+09:00 Masahiro Yamada :
> The NAND framework makes sure to pass in the buffer with at least
> chip->buf_align alignment. Currently, the Denali NAND driver only
> requests 16 byte alignment. This causes unaligned cache operations
> for the DMA transfer.
>
> [Error Example]
>
>
2018-07-19 16:28 GMT+09:00 Masahiro Yamada :
> The second argument of fdt_fixup_mtdparts() is an opaque pointer,
> 'void *node_info', hence callers can pass any pointer.
>
> Obviously, fdt_fixup_mtdparts() expects 'struct node_info *'
> otherwise, it crashes run-time.
>
> Change the prototype so th
2018-07-24 15:27 GMT+09:00 Peng Fan :
> To system which has kconfiglib installed, genboardscfg will
> use system kconfiglib, we need it use U-Boot owned version,
> so move the buildman path to first.
>
> Signed-off-by: Peng Fan
> Cc: Masahiro Yamada
> Cc: Simon Glass
> Cc: Tom Rini
> ---
Acke
Several boards do not use the default UART3, so they do a check
for ifdef CONFIG_SPL_BUILD and enable the pointer for
CONFIG_SYS_NS16550_COMx to point to OMAP34XX_UARTx.
Let's consoldate this all into one place, and remove them from the
individual boards.
Signed-off-by: Adam Ford
---
V2: Reba
On 07/24/2018 04:38 PM, Michal Simek wrote:
> Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files
> and point to origin internal board name.
>
> Signed-off-by: Michal Simek
> ---
[...]
> diff --git a/arch/arm/dts/avnet-ultra96-rev1.dts
> b/arch/arm/dts/avnet-ultra96-rev1.d
This single-sources the state of the ARP.
Signed-off-by: Joe Hershberger
---
include/net.h | 1 +
net/arp.c | 11 ---
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/include/net.h b/include/net.h
index f9984ae86c..63718a47f2 100644
--- a/include/net.h
+++ b/include/n
Signed-off-by: Joe Hershberger
---
arch/sandbox/include/asm/eth.h | 9 +
drivers/net/sandbox.c | 20
2 files changed, 29 insertions(+)
diff --git a/arch/sandbox/include/asm/eth.h b/arch/sandbox/include/asm/eth.h
index 6dabbf00ab..6bb3f1bbfd 100644
--- a/ar
The issue [1] was reported by (Peter) Tran Tien Dat. Unfortunately his
fix for the issue broke notmal operation and I don't feel is a good way
to address the issue. Also, the situation was not covered in the unit
tests, so we'll add them now.
First we refactor the unit test capability of the sandb
Make the send handler registerable so tests can check for different
things.
Signed-off-by: Joe Hershberger
---
arch/sandbox/include/asm/eth.h | 17 ++
drivers/net/sandbox.c | 53 ++
2 files changed, 66 insertions(+), 4 deletions(-)
d
Peter originally sent a fix, but it breaks a number of other things.
This addresses the original reported issue in a different way.
That report was:
> U-Boot has 1 common buffer to send Ethernet frames, pointed to by
> net_tx_packet. When sending to an IP address without knowing the MAC
> addres
Make the behavior of the send function reusable.
Signed-off-by: Joe Hershberger
---
arch/sandbox/include/asm/eth.h | 20 +
drivers/net/sandbox.c | 176 -
2 files changed, 124 insertions(+), 72 deletions(-)
diff --git a/arch/sandbox/include/
This tests that ARP requests made to this target's IP address are
responded-to by the target when it is doing other networking operations.
This currently corrupts the ongoing operation of the device if it
happens to be awaiting an ARP reply of its own to whatever serverip it
is attempting to commu
The target will respond to pings while doing other network handling.
Make sure that the response happens and is correct.
This currently corrupts the ongoing operation of the device if it
happens to be awaiting an ARP reply of its own to whatever serverip it
is attempting to communicate with. In th
If tests want to implement tx handlers, they will likely need access to
the details in the priv structure.
Signed-off-by: Joe Hershberger
---
arch/sandbox/include/asm/eth.h | 19 +++
drivers/net/sandbox.c | 19 ---
2 files changed, 19 insertions(+), 19 d
Use up to the max allocated receive buffers so be able to test more
complex situations.
Signed-off-by: Joe Hershberger
---
arch/sandbox/include/asm/eth.h | 10 +---
drivers/net/sandbox.c | 57 ++
2 files changed, 52 insertions(+), 15 deletion
Store the per-device data with the device.
Signed-off-by: Joe Hershberger
---
drivers/net/sandbox.c | 18 ++
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/net/sandbox.c b/drivers/net/sandbox.c
index b71c8f88d9..60fe065ee5 100644
--- a/drivers/net/sandbox
Hi Sam,
> On Sat, Jun 30, 2018 at 7:20 AM, Simon Glass wrote:
> > On 29 June 2018 at 11:59, Sam Protsenko
> > wrote:
> >> In case when user provides '-' as USB controller index, like this:
> >>
> >> => fastboot -
> >>
> >> data abort occurs in strcmp() function in do_fastboot(), here:
Hi Sam,
> On Fri, Jul 13, 2018 at 4:35 PM, Sam Protsenko
> wrote:
> > Commit 5d8fae79163e ("dfu: avoid memory leak") brings a regression
> > which described below. This patch is effectively reverting that
> > commit, adding corresponding comment to avoid such regressions in
> > future.
> >
> > In
This series adds support for STM32 Analog to Digital Converter.
STM32 ADC support is originally based on Linux kernel v4.18-rcs:
- First two patches brings some changes in clk and adc uclass
- Next two patches add STM32 ADC dt-bindings and driver for STM32MP1 and
STM32H7
- Last patches add confi
The ReflexCES PCIe carrier board Arria 10 SoC SoM (R329) provides
access to all the features of the Arria 10 SoC SoM (R315) (Ethernet,
OTG USB, Transceivers, UART) and adds further functions, including SFP+
connectors, PCIe x8 Gen3, USB3.0 and a wifi interface.
No fpga portion is provided in fit_s
On 07/24/2018 01:48 AM, Simon Glass wrote:
> Hi Fabrice,
>
> On 23 July 2018 at 06:35, Fabrice Gasnier wrote:
>> device_get_supply_regulator() only needs to be called once.
>> But each time there's call to adc_vxx_value() for instance, it calls
>> adc_vxx_platdata_update() -> device_get_supply_re
Add ADC device tree node. This allows to get analog conversions on
stm32mp157.
Signed-off-by: Fabrice Gasnier
---
Changes in v2: None
---
arch/arm/dts/stm32mp157.dtsi | 32
1 file changed, 32 insertions(+)
diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/d
This patch adds support for STMicroelectronics STM32 ADC (analog to
digital converter). It's originally based on Linux kernel v4.18-rcs
drivers/iio/adc/stm32-adc*. It's composed of:
- core driver (UCLASS_SIMPLE_BUS) manages common resources (clk, regu).
- child drivers (UCLASS_ADC) declare each ADC
Enable ADC on stm32mp15.
- CONFIG_CMD_ADC
- CONFIG_STM32_ADC
Signed-off-by: Fabrice Gasnier
Reviewed-by: Simon Glass
---
Changes in v2: None
configs/stm32mp15_basic_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/stm32mp15_basic_defconfig
b/configs/stm
Add clk_valid() to check for optional clocks are valid.
Call clk_valid() in test/dm/clk.c and add relevant test routine to
sandbox clk tests.
Signed-off-by: Fabrice Gasnier
---
Changes in v2:
- add test case for 'clk_valid()', e.g. in test/dm/clk.c and sandbox.
- Update TRUE/FALSE comments to lo
This patch adds documentation of device tree bindings for the STM32 ADC.
It's based on linux-v4.18-rc* dt-bindings, at the time of writing:
- Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
Signed-off-by: Fabrice Gasnier
Reviewed-by: Simon Glass
---
Changes in v2: None
doc/device-t
device_get_supply_regulator() only needs to be called once.
But each time there's call to adc_vxx_value() for instance, it calls
adc_vxx_platdata_update() -> device_get_supply_regulator().
So, move device_get_supply_regulator() to pre_probe() routine.
This also allows vdd_supply/vss_supply to be
Am 24.07.2018 um 12:31 schrieb Michal Simek:
On 23.7.2018 20:42, Stefan Herbrechtsmeier wrote:
Am 23.07.2018 um 13:43 schrieb Michal Simek:
Reading registers for finding out output value is not working because
input value is read instead in case of tristate.
Reported-by: Stefan Herbrechtsmeier
Hi Steven,
On Mon, Jul 23, 2018 at 6:26 AM, Steven Stoner
wrote:
> Hello there,
>
> Sorry about this but I could use some assistance. I am trying to get the
> ethernet to work under the sandbox and am having issues. I saw and applied
> the patch from Joe Hershberger-2 that seemed to be releva
Am 24.07.2018 um 10:37 schrieb Michal Simek:
On 23.7.2018 20:29, Stefan Herbrechtsmeier wrote:
Am 23.07.2018 um 11:08 schrieb Michal Simek:
On 20.7.2018 21:31, Stefan Herbrechtsmeier wrote:
Am 12.07.2018 um 16:04 schrieb Michal Simek:
There should be proper bank name setup to distiguish betwe
I am trying to boot an i.MX6Q via SPL to U-Boot and eventually, use
Falcon mode to start the kernel. I can boot via SPL over USB. I have
enabled the NAND and SPL NAND, and i can confirm that mxs_nand_spl.c
is being built in. The board is imx6q_logic
Unfortunately, I have run into two issues.
1
On Tue, Jul 24, 2018 at 3:27 PM, Troy Kisky
wrote:
> Didn't we already discuss this and decide to be consistent with CONFIG_MX6 /7
> and the rest ?
Good point.
Peng, please use CONFIG_MX8 instead.
Thanks
___
U-Boot mailing list
U-Boot@lists.denx.de
On 7/23/2018 5:51 PM, Fabio Estevam wrote:
> Hi Peng,
>
> On Mon, Jul 23, 2018 at 9:45 PM, Peng Fan wrote:
>
>> In V1, I use CONFIG_IMX8, but I think there is no need to use it, because
>> CONFIG_ARCH_IMX8 could do same thing.
>
> Yes, I prefer to drop "ARCH" for consistency.
>
>> I could reve
On Fri, Jul 20, 2018 at 6:18 PM, Sam Protsenko
wrote:
> This patch series intended to make boot log better. Basically here we
> just remove unwanted error messages, relying on the message from most
> deep API to be printed (like mmc subsystem). At the moment this looks
> like most clean solution t
On Fri, Jul 13, 2018 at 4:35 PM, Sam Protsenko
wrote:
> Commit 5d8fae79163e ("dfu: avoid memory leak") brings a regression which
> described below. This patch is effectively reverting that commit, adding
> corresponding comment to avoid such regressions in future.
>
> In case of error in dfu_confi
On Sat, Jun 30, 2018 at 7:20 AM, Simon Glass wrote:
> On 29 June 2018 at 11:59, Sam Protsenko wrote:
>> In case when user provides '-' as USB controller index, like this:
>>
>> => fastboot -
>>
>> data abort occurs in strcmp() function in do_fastboot(), here:
>>
>> if (!strcmp(argv[1], "u
On 07/24/2018 06:07 AM, Michal Simek wrote:
> There is no reason to limit gzip usage only for OS_BOOT and kernel image
> type.
>
> Signed-off-by: Michal Simek
> ---
>
> common/spl/spl_fit.c | 5 +
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/common/spl/spl_fit.c b/comm
On 07/10/2018 07:11 PM, Ran Wang wrote:
> Hi York,
>
>> -Original Message-
>> From: York Sun
>> Sent: Wednesday, July 11, 2018 05:06
>> To: Ran Wang ; Albert Aribaud
>>
>> Cc: u-boot@lists.denx.de
>> Subject: Re: [PATCH] armv8: layerscape: Enable EHCI access for LS1012A
>>
>> On 07/02/201
The board is manufactured by Digilent
Main features:
- Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20)
- RAM: 1 GB DDR3L
- FLASH: 16 MB QSPI
- 1 Gbps Ethernet
- USB 2.0
- microSD slot
- Pcam camera connector
- HDMI Tx and Rx
- Audio codec: stereo out, stereo in, mic
- 5 (Z7-10) or 6 (Z7-20) Pmod ports
- 6
Hi Maxime,
On 24 July 2018 at 00:58, Maxime Ripard wrote:
> On Mon, Jul 23, 2018 at 05:48:25PM -0600, Simon Glass wrote:
>> Hi,
>>
>> On 20 July 2018 at 08:01, Lukasz Majewski wrote:
>> > Hi Eugen,
>> >
>> > Thanks for (re-)bringing the One wire support to u-boot.
>> >
>> >> Add a sandbox eeprom
Hi Michal,
On Tue, Jul 24, 2018 at 8:39 AM Michal Simek wrote:
> [...]
> This should be tuned more. That file is long because you support all
> silicon version which is not needed at all. z7 is quite new product
> where 3_0 tables are used. It means just manually remove that
> PCW_SILICON_VERSION
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files
and point to origin internal board name.
Signed-off-by: Michal Simek
---
MAINTAINERS| 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/avnet-ultra96-rev1.dts| 19 +++
bo
From: Laurentiu Tudor
Add a define with a value for the missing debug stream ID.
Signed-off-by: Laurentiu Tudor
---
arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h
b/arch/
From: Laurentiu Tudor
QMAN_BAR{E} register setup was disabled on ARM platforms, however the
register does need to be set. Enable the code also on ARMs and fix the
CONFIG_SYS_QMAN_MEM_PHYS define to the correct value so that the newly
enabled code works.
Signed-off-by: Laurentiu Tudor
---
arch/
From: Laurentiu Tudor
Add infrastructure for ICID setup and device tree fixup on ARM
platforms. This include basic ICID setup for several devices.
Signed-off-by: Laurentiu Tudor
---
arch/arm/cpu/armv8/fsl-layerscape/Makefile| 1 +
arch/arm/cpu/armv8/fsl-layerscape/icid.c | 110 +
From: Laurentiu Tudor
Add support for ICID setting of qman portals and the required device
tree fixups. Also fix an endiness issue in portal setup code.
Signed-off-by: Laurentiu Tudor
---
.../arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 16 +++
.../asm/arch-fsl-layerscape/fsl_portals.h
From: Laurentiu Tudor
Add support for ICID setting of fman ports and the required device
tree fixups.
Signed-off-by: Laurentiu Tudor
---
arch/arm/cpu/armv8/fsl-layerscape/icid.c | 82 +++
.../arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 30 +++
.../asm/arch-fsl-layersca
From: Laurentiu Tudor
Add support for SEC ICID configuration and apply it for ls1046a.
Also add code to make the necessary device tree fixups.
Also included in this patch, while adding the new required JR
defines sanitize the preexisting ones by dropping the CONFIG_
prefixes.
Signed-off-by: Laur
From: Laurentiu Tudor
Add defines for the edma and qdma register block base addresses.
Signed-off-by: Laurentiu Tudor
---
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
b/arc
From: Laurentiu Tudor
The QMan IP block in this SoC is version 3.2 so advertise
this in the SoC configuration header.
Signed-off-by: Laurentiu Tudor
---
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/include/asm/arch-fsl-layerscap
From: Laurentiu Tudor
This patch series adds the required devices setup and device tree
fixups for SMMU enablement on LS1046A chips. The approach taken tries
to mimic the implementation of PAMU LIODN setup on booke powerpc.
First 4 patches contain some fixes and add some missing bits & pieces.
L
Hi,
On 20.7.2018 18:17, Luis Araneda wrote:
> Hi Michal,
>
> On Fri, Jul 20, 2018 at 6:38 AM Michal Simek wrote:
>> On 20.7.2018 01:37, Luis Araneda wrote:
>>> Hi Michal,
>>>
>>> On Thu, Jul 19, 2018 at 2:23 AM Michal Simek
>>> wrote:
>> We need that functionality first but then enable it for
Hi Stefano,
On 23.07.2018 10:09, Stefano Babic wrote:
Hi Marcin,
On 19/07/2018 13:37, Marcin Niestroj wrote:
ERR05 in IMX6UL errata says to use OCRAM memory above
0x908000 (instead of 0x907000) for silicon revision 1.2 shipped
prior date code 1740.
As we cannot check affected targets in r
There is no reason to limit gzip usage only for OS_BOOT and kernel image
type.
Signed-off-by: Michal Simek
---
common/spl/spl_fit.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 9eabb1c1058b..dbf5ac33a845 100644
--- a/c
1 - 100 of 180 matches
Mail list logo
