This patch fixes the following warning messages coming out of
'drivers/net/smc9.h' when compiled for 'vexpress_aemv8a':
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Currently this issue seems to surface when SMSC is compiled for 64-bit
ARMv8 platforms, so th
On 29/01/14 17:04, Minkyu Kang wrote:
> Because of the list of peripherals is not sequential,
> such a routine does not check for valid correctly.
> Error check will be done when call the exynos_pinmux_config function.
>
> Signed-off-by: Minkyu Kang
> ---
> arch/arm/cpu/armv7/exynos/pinmux.c |
On 29/01/14 17:03, Minkyu Kang wrote:
> Signed-off-by: Minkyu Kang
> ---
> arch/arm/include/asm/arch-exynos/periph.h |2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/include/asm/arch-exynos/periph.h
> b/arch/arm/include/asm/arch-exynos/periph.h
> index 30c7f1
On 29/01/14 17:03, Minkyu Kang wrote:
> The value of PERIPH_ID_COUNT was wrong, and unnecessary.
>
> Signed-off-by: Minkyu Kang
> ---
> arch/arm/cpu/armv7/exynos/clock.c |2 +-
> arch/arm/include/asm/arch-exynos/periph.h |1 -
> 2 files changed, 1 insertion(+), 2 deletions(-)
>
ARM has specific clk entries which should be also setup.
Signed-off-by: Michal Simek
---
Changes in v2:
- Freq is expected to be in MHz
- Use different DDR clock input
arch/arm/cpu/armv7/zynq/clk.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/cpu/armv7/zynq/clk.c b/arch/ar
On Tuesday, February 04, 2014 at 06:02:38 PM, Mateusz Zalega wrote:
> Preprocessor definitions and hardcoded implementation selection in
> g_dnl core were replaced by a linker list made of (usb_function_name,
> bind_callback) pairs.
>
> Signed-off-by: Mateusz Zalega
> Cc: Lukasz Majewski
> Cc: M
On 02/04/2014 09:35 PM, Tom Rini wrote:
> On Tue, Feb 04, 2014 at 04:59:45PM +0100, Michal Simek wrote:
>
>> This patch is here because of:
>> "arm: keep all sections in ELF file"
>> (sha1: 47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7)
>>
>> Our tools expect to have elf with only LOAD header.
>> Witho
On 02/05/2014 04:00 AM, Masahiro Yamada wrote:
> Hello Michal,
>
>
>> @@ -224,4 +226,5 @@
>> #define CONFIG_CMD_MII
>> #define CONFIG_CMD_TFTPPUT
>>
>> +
>> #endif /* __CONFIG_ZYNQ_COMMON_H */
>> --
>> 1.8.2.3
>>
>
>
> Please do not double empty lines.
Sure.
Just sent v2.
Thanks,
Michal
This patch is here because of:
"arm: keep all sections in ELF file"
(sha1: 47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7)
Our tools expect to have elf with only LOAD header.
Without this fix also PHDR, INTERP and DYNAMIC headers
are available in ELF.
Signed-off-by: Michal Simek
---
Changes in v2:
-
The reason is enabling tftpput command where
tftp shorcut stops to work for tftpboot.
Signed-off-by: Michal Simek
---
include/configs/zynq-common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 36b9508..f0
FMAN microcode image address range on NOR flash changed from
(0xeff0 to 0xebf1) to (0xeff1 to 0xeff1)
The change has been done
- to support FMAN microcode flashing via promjet mechanism as
promjet uses address based on offsets. Based on this
address of FMAN microcode flash on pro
Hi All,
CCing Jaehoon Chung.
Regards,
Rajeshwari
On Wed, Feb 5, 2014 at 10:48 AM, Rajeshwari Shinde
wrote:
> From: Rajeshwari S Shinde
>
> This patch corrects the divider value written to CLKDIV register.
> Since SDCLKIN is divided inside controller by the DIVRATIO value set
> in the CLKSEL re
From: Rajeshwari S Shinde
This patch corrects the divider value written to CLKDIV register.
Since SDCLKIN is divided inside controller by the DIVRATIO value set
in the CLKSEL register, we need to use the same output clock value to
calculate the CLKDIV value.
as per user manual: cclk_in = SDCLKIN
Fix build error due to missing include of serial.h and a trivial typo.
Signed-off-by: Axel Lin
---
Hi Tom,
This patch was sent on
http://lists.denx.de/pipermail/u-boot/2014-January/171093.html
I don't get any feedback from NIOS2 maintainers so far.
Maybe you can pick up this serial
(or at least p
The implementation of oc_serial_setbrg() for CONFIG_SYS_NIOS_FIXEDBAUD and
!CONFIG_SYS_NIOS_FIXEDBAUD are very similar.
Add a baudrate variable and set it to either CONFIG_BAUDRATE or gd->baudrate.
Then we can unify the code for both cases.
Signed-off-by: Axel Lin
---
drivers/serial/opencores_ya
The Pi has no flash to store an environment in the usual fashion. However,
the user may wish to customize the environment. We know that the SD card
must be present, since that's where the boot ROM has loaded U-Boot from.
So, load uEnv.txt from there early during boot. This allows the user to
e.g. c
pxe.c provides both the "pxe" command which relies on a network, and the
"sysboot" command which doesn't. Fix the file to compile when network
support isn't enabled. This is useful e.g. on the Raspberry Pi which has
no network support yet, but will soon support the sysboot command.
Signed-off-by:
Modify the rpi_b board to include the "distro defaults" header, so that
all the config options distros expect are enabled. Remove any #defines
that enable the same options from the rpi_b.h.
Signed-off-by: Stephen Warren
---
Patches 2/4 and 4/4 depend on various patches in u-boot/master, so that
w
Rework rpi_b's bootcmd (and sub-commands) to match Tegra's bootcmd as
much as possible. This will aid in a future patch which will create a
common header e.g. config_distro_bootcmd.h.
While at it, enable booting from extlinux.conf using the sysboot command.
The iteration and componentization curr
Hello Otavio,
> Does this version address Simon's build time increase? Or did it been
> identified?
Updates in v9 are unrelated with Simon's anxiety about Kbuild
performance.
In my view, preformance regression by Kbuild is not so big.
And its cause was identified.
Please read my analysis.
http
Hello Michal,
> @@ -224,4 +226,5 @@
> #define CONFIG_CMD_MII
> #define CONFIG_CMD_TFTPPUT
>
> +
> #endif /* __CONFIG_ZYNQ_COMMON_H */
> --
> 1.8.2.3
>
Please do not double empty lines.
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boo
On Tuesday, February 04, 2014 at 10:49:24 PM, Lukasz Majewski wrote:
[...]
> > > Maybe other ARM architectures shall have the cache management code
> > > updated to work in a similar way to cache_v7.c ?
> >
> > Not all CPUs are ARM architecture ... there're others, you know ;-)
> :
> :-) ... but
Unlike Linux Kernel, U-Boot historically had *.dts files under
board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/.
I think arch/$(ARCH)/dts dicretory is a better location
to store both *.dts and *.dtsi files.
For example, before this commit, board/xilinx/dts directory
had both Microbla
It is convenient to have all device trees on the same SoC compiled.
It allows for later easy repackaging without the need to re-run
the make file.
- Build device trees with the same SoC under arch/$(ARCH)/dts
- Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or
DEVICE_TREE=... to dts
Useful rules in scripts/Makefile.lib allows us to easily
generate a device tree blob and wrap it in assembly code.
We do not need to parse a linker script to get output format and arch.
This commit deletes ./u-boot.dtb since it is a copy of dts/dt.dtb.
Signed-off-by: Masahiro Yamada
---
Change
1/3 re-writes dts/Makefile more simply.
It does not change the behavior except removal of ./u-boot.dts
2/3 moves *.dts from board/$(VENDOR)/dts to arch/$(ARCH)/dts
3/3 adds multipe DTBs generation
(Multiple DTBs generation was suggested by Simon.)
This patch uses my Kbuild series as a prerequis
On 01/28/2014 10:41 PM, Stephen Warren wrote:
> U-Boot names the Raspberry Pi board rpi_b. This means that the common
> expression for DTB filename ${soc}-${board}.dtb expands to
> bcm2835-rpi_b.dtb. However, the DTB generated by the Linux kernel is
> bcm2835-rpi-b.dtb. Set $fdtfile in U-Boot's env
On 01/28/2014 10:42 PM, Stephen Warren wrote:
> The entries in config.mk were needed so that U-Boot could be built
> with an old version of the Raspberry Pi Foundation's toolchain. Without
> them, the build would error out with:
>
> ...-ld: error: .../libgcc.a(_bswapsi2.o) uses VFP register argume
tools/kernel-doc/docproc.c and tools/kernel-doc/kernel-doc are
files imported from Linux Kernel.
They originally resided under scripts/ directory in Linux Kernel.
This commit moves them to the original location.
Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
---
Changes in v2:
- fix t
Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
---
Changes in v2:
- update also .gitignore
doc/DocBook/.gitignore | 1 -
doc/DocBook/stylesheet.xsl | 1 -
scripts/docproc.c | 72 +++-
scripts/kernel-doc | 74 +++
- Delete fs.xml from DOCBOOKS to fix an error.
Commit e3ff797c added fs.xml to DOCBOOKS
but missed to add doc/DocBook/fs.tmpl.
- Fix the location of include guard in include/linker_lists.h.
Signed-off-by: Masahiro Yamada
Reported-by: Abraham Varricatt
Acked-by: Simon Glass
---
Th
"make %docs" have not worked for a while.
This problem was reported by Abraham Varricatt.
"make htmldocs" gives error:
http://u-boot.10912.n7.nabble.com/quot-make-htmldocs-quot-gives-error-td168840.html
This series adjusts kernel doc stuff to the current build system
and fixes errors.
By applyi
Commit bb02c536 stopped creaing a symbolic link include/asm.
Signed-off-by: Masahiro Yamada
---
include/.gitignore | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/.gitignore b/include/.gitignore
index 7cd3e90..bf142fc 100644
--- a/include/.gitignore
+++ b/include/.gitignore
@@ -1,5 +1
Albert,
Please pull u-boot-tegra/master into ARM/master. Thanks!
./MAKEALL -s tegra AOK, checkpatch.pl is clean, and ./MAKEALL -a arm only
shows failures that were already present in ARM/master.
The following changes since commit e97f9d817e600cd6f43d1d0da76f5787e33a5c56:
Merge branch 'u-boot-
From: Stephen Warren
Update the common Tegra boot scripts in the default environment to
a) Make use of the new "exists" shell command to avoid some error
messges.
b) Allow booting using the sysboot command and extlinux.conf. This
allows easy creation of boot menus, and provides a simple i
From: Stephen Warren
Modify all Tegra boards to include the "distro defaults" header, so that
all the config options distros expect are enabled. Remove any #defines
that enable the same options from the Tegra files.
Signed-off-by: Stephen Warren
---
v3: No change.
v2: No change.
Note: These pa
From: Stephen Warren
This retrieves a PXE config file over the network, and executes it. This
allows an extlinux config file to be retrieved over the network and
executed, whereas the existing bootcmd_dhcp retrieves a U-Boot script.
Signed-off-by: Stephen Warren
---
v3: No change.
v2: No chang
On Tue, Feb 04, 2014 at 05:25:47AM -0600, Dennis Gilmore wrote:
> describe a set of default features that distros can rely on being available.
> having this common definition means that distros can easily support systems
> implementing them.
>
> Signed-off-by: Dennis Gilmore
Applied to u-boot/m
On Tue, Feb 04, 2014 at 05:25:46AM -0600, Dennis Gilmore wrote:
> Signed-off-by: Dennis Gilmore
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Tue, 2014-02-04 at 01:41 -0600, Bansal Aneesh-B39320 wrote:
> > -Original Message-
> > From: Wood Scott-B07421
> > Sent: Tuesday, February 04, 2014 4:32 AM
> > To: Bansal Aneesh-B39320
> > Cc: u-boot@lists.denx.de; Sun York-R58495; Gupta Ruchika-R66431
> > Subject: Re: [PATCH][v3] powerp
On Mon, Feb 03, 2014 at 01:21:10PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This hooks into the generic "file exists" support added in an earlier
> patch, and provides an implementation for the FAT filesystem.
>
> Signed-off-by: Stephen Warren
> Acked-by: Simon Glass
Applied t
On Mon, Feb 03, 2014 at 01:21:09PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This hooks into the generic "file exists" support added in an earlier
> patch, and provides an implementation for the ext4 filesystem.
>
> Signed-off-by: Stephen Warren
> Acked-by: Simon Glass
Applied
On Mon, Feb 03, 2014 at 01:21:08PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> Since the generic ls command no longer segfaults sandbox, enable it.
>
> Signed-off-by: Stephen Warren
> Acked-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Di
On Tue, 4 Feb 2014 21:21:16 +0100
Marek Vasut wrote:
> On Tuesday, February 04, 2014 at 08:29:49 AM, Lukasz Majewski wrote:
> > Hi Marek,
> >
> > > On Monday, February 03, 2014 at 12:06:59 PM, Lukasz Majewski
> > > wrote:
> > > > Hi Marek,
> > > >
> > > > > On Saturday, February 01, 2014 at 12:
On Mon, Feb 03, 2014 at 01:21:04PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> Currently, ! can only be parsed as the first operator in an expression.
> This prevents the following from working:
>
> $ if test ! ! 1 -eq 1; then echo yes; else echo no; fi
> yes
> $ if test ! 1 -eq 2 -
On Mon, Feb 03, 2014 at 01:21:07PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This hooks into the generic "file exists" support added in an earlier
> patch, and provides an implementation for the sandbox test environment.
>
> Signed-off-by: Stephen Warren
> Acked-by: Simon Glass
On Mon, Feb 03, 2014 at 01:21:06PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This is much like a regular shell's -e operator, except that it takes
> multiple arguments to specify the device type and device/partition ID
> in addition to the usual filename:
>
> if test -e mmc 0:1 /
On Mon, Feb 03, 2014 at 01:21:00PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This could be used in scripts such as:
>
> if test -e mmc 0:1 /boot/boot.scr; then
> load mmc 0:1 ${scriptaddr} /boot/boot.scr
> source ${scriptaddr}
> fi
>
> rather than:
>
> if load mmc 0:1 ${
On Mon, Feb 03, 2014 at 01:21:03PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This better mirrors the behaviour of bash, for example:
>
> $ if test -z = -z; then echo yes; else echo no; fi
> yes
>
> This is parsed as a string comparison of "-z" and "-z", since the check
> for the
On Mon, Feb 03, 2014 at 01:21:02PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> do_test() currently uses strcmp() twice to determine which operator is
> present; once to determine how many arguments the operator needs, then
> a second time to actually decode the operator and implement
On Mon, Feb 03, 2014 at 01:21:05PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This emulates bash:
> $ if test; then echo yes; else echo no; fi
> no
>
> Currently, the code sets expr = -1 in this case, which gets mapped to
> 0 (true) at the end of do_test() by the logical -> shell e
On Mon, Feb 03, 2014 at 01:21:01PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> FAT and ext4 expect that the passed in block device descriptor not be
> NULL. This causes problems on sandbox, where get_device_and_partition()
> succeeds for the "host" device, yet passes back a NULL devi
On Mon, Feb 03, 2014 at 01:20:59PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> Fix a few issues with the generic "save" shell command, and fs_write()
> function.
>
> 1) fstypes[].write wasn't filled in for some file-systems, and isn't
>checked when used, which could cause crashe
On Mon, Feb 03, 2014 at 01:24:24PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> I recently re-wrote cmd_test() to add new features. Add a bunch of unit-
> tests to make sure I didn't break anything.
>
> Suggested-by: Simon Glass
> Signed-off-by: Stephen Warren
Applied to u-boot/ma
On Mon, Feb 03, 2014 at 01:24:23PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> "env default -f" doesn't work any more; replace it with
> "env default -f -a". This avoids the following when running the ut
> command:
>
> do_ut_cmd: Testing commands
> env - environment handling command
On Fri, Jan 24, 2014 at 08:46:37PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> This enables generic filesystem commands such as load and ls, which
> automatically work with multiple filesystem types, without having to
> be told which is present, unlike e.g. ext2load, fatls.
>
> Sign
On Tue, Jan 28, 2014 at 02:50:10PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> People who write (or scripts that auto-generate) extlinux.conf don't
> want to know about HW-specific information such as FDT filenames. Create
> a new extlinux.conf tag "fdtdir" that specifies only the di
On Mon, Feb 03, 2014 at 09:04:42AM -0800, York Sun wrote:
> Tom,
>
> The following changes since commit 07e2822d158940a0e8ba45b6ab0344ffa1011a07:
>
> board: nios2: Check if flash is configured before calling
> early_flash_cmd_reset() (2014-01-29 16:44:18 -0500)
>
> are available in the git re
On Tue, Jan 28, 2014 at 02:50:09PM -0700, Stephen Warren wrote:
> From: Stephen Warren
>
> The specification for extlinux.conf[1] states that "fdt" is an alias for
> "devicetree". To date, U-Boot only implements "fdt". Rectify that.
>
> [1] http://freedesktop.org/wiki/Specifications/BootLoaderS
On Tue, Feb 04, 2014 at 04:47:39PM +0100, Michal Simek wrote:
> Hi Joe,
>
> I have two pending patches for xilinx ethernet drivers.
> Can you please add them to your net tree?
>
> Thanks,
> Michal
>
>
> The following changes since commit b44bd2c73c4cfb6e3b9e7f8cf987e8e39aa74a0b:
>
> Prepare
On Tue, Feb 04, 2014 at 04:53:06PM +0100, Michal Simek wrote:
> Hi Tom,
>
> I have one pending uartlite patch which I would like to add to the mainline.
> Can you please add it to your tree?
>
> Thanks,
> Michal
>
>
> The following changes since commit b44bd2c73c4cfb6e3b9e7f8cf987e8e39aa74a0b:
On Tue, 2014-02-04 at 12:50 +, Hannes Petermaier wrote:
> 2)
> a line ist limited to 80 characters (maybe thus comes from very old days
> where displays couldn't show more than this and scrolling was very
> expensive). is this state of the art ?
Even on a fairly nice, modern screen, I find 80
On Tue, Feb 04, 2014 at 04:36:08PM +0100, Michal Simek wrote:
> Hi Tom,
>
> please pull this one patch to your tree. It is adding new clk command
> which I want to use for zynq. When it is applied I will prepare
> zynq specific patches which will go through arm tree.
>
> i.MXes are other users fo
On Tue, Feb 04, 2014 at 04:41:50PM +0100, Michal Simek wrote:
> Hi Tom,
>
> please pull these Microblaze changes to your tree.
>
> Thanks,
> Michal
>
> The following changes since commit 07e2822d158940a0e8ba45b6ab0344ffa1011a07:
>
> board: nios2: Check if flash is configured before calling
On Tue, 2014-02-04 at 13:43 +0100, Michal Simek wrote:
> Hi Scott and others,
>
> I have a question regarding BBT position and number of blocks allocated
> for BBT.
>
> Did you face the issue with last 4 blocks broken in any NAND flash
> device since the default option in Linux/u-boot BBM is last
On Tue, Feb 04, 2014 at 04:59:45PM +0100, Michal Simek wrote:
> This patch is here because of:
> "arm: keep all sections in ELF file"
> (sha1: 47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7)
>
> Our tools expect to have elf with only LOAD header.
> Without this fix also PHDR, INTERP and DYNAMIC headers
Dear Hannes,
In message <29703.213.33.116.113.1391525447.squir...@petermaier.org> you wrote:
>
> The 80 character thing is reported from checkpatch.pl as WARNING, not as
> ERROR - so there will be a chance of the patch to become accepted by a
> custodian.
It is better for your reputation ere on
On Tuesday, February 04, 2014 at 05:06:14 PM, Jagannadha Sutradharudu Teki
wrote:
> - Shrink spi_slave {}
> - Shrink spi_flash_params {}
> - Documentation for sf features
>
> Signed-off-by: Jagannadha Sutradharudu Teki
> ---
> doc/SPI/README.sf-features| 121 +
>
On Tuesday, February 04, 2014 at 05:06:13 PM, Jagannadha Sutradharudu Teki
wrote:
> Squash the malloc()+memset() combo in favor of calloc().
>
> Signed-off-by: Jagannadha Sutradharudu Teki
Acked-by: Marek Vasut
btw your CC list seems bugged for some reason ...
Best regards,
Marek Vasut
_
On Tuesday, February 04, 2014 at 08:29:49 AM, Lukasz Majewski wrote:
> Hi Marek,
>
> > On Monday, February 03, 2014 at 12:06:59 PM, Lukasz Majewski wrote:
> > > Hi Marek,
> > >
> > > > On Saturday, February 01, 2014 at 12:05:29 PM, Lukasz Majewski
> > > >
> > > > wrote:
> > > > > On Sat, 1 Feb 2
Dear Hannes,
In message <11685.213.33.116.116.1391518218.squir...@petermaier.org> you wrote:
>
> I've read on the U-Boot website about coding style. They say 'All
> contributions to U-Boot should conform to the Linux kernel coding style'.
> Further i've read this link and there are at least 2 thi
Hi Jagan,
As there are no further comments, would need your help to apply this
patch. Thanks and appreciate for your support.
Chin Liang
On Fri, 2014-01-10 at 11:39 -0600, Chin Liang See wrote:
> To add the Cadence SPI driver support for Altera SOCFPGA. It
> required information such as clocks
Hi Albert,
As there are no further comments, would need your help to apply this
patch. Thanks and appreciate for your support.
Chin Liang
On Wed, 2013-12-18 at 17:54 -0600, Chin Liang See wrote:
> The pll_config.h will be consumed by Clock Manager driver
>
> Signed-off-by: Chin Liang See
> Cc
Hi Scott,
As there are no further comments, would need your help to apply this
patch. Thanks and appreciate for your support.
Chin Liang
On Wed, 2013-12-18 at 15:18 -0600, Chin Liang See wrote:
> To add the Denali NAND driver support into U-Boot. It required
> information such as register base
Hi Albert,
As there are no further comments, would need your help to apply this
patch. Thanks and appreciate for your support.
Chin Liang
On Wed, 2013-12-18 at 17:54 -0600, Chin Liang See wrote:
> Clock Manager driver will be called to reconfigure all the
> clocks setting based on user input. T
The IOCSR handoff files will be consumed by Scan Manager driver.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Wolfgang Denk
CC: Pavel Machek
Cc: Tom Rini
Cc: Albert Aribaud
Signed-off-by: Chin Liang See
---
Changes for v2
- rebase with latest v2014.01-rc1
---
board/altera/socfpga/ioc
Scan Manager driver will be called to configure the IOCSR
scan chain. This configuration will setup the IO buffer settings
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Wolfgang Denk
CC: Pavel Machek
Cc: Tom Rini
Cc: Albert Aribaud
Signed-off-by: Chin Liang See
---
Changes for v2
- reb
Hi Albert,
As there are no further comments, would need your help to apply this
patch. Thanks and appreciate for your support.
Chin Liang
On Wed, 2013-12-18 at 16:23 -0600, Chin Liang See wrote:
> To add the DesignWare watchdog driver support. It required
> information such as register base add
Enhance the DesignWare I2C driver to support address length more
than 1 byte. This enhancement is required as some I2C slave
device such as EEPROM chip might have 16 bit address byte.
Signed-off-by: Chin Liang See
Acked-by: Alexey Brodkin
Cc: Tom Rini
cc: Armando Visconti
Cc: Stefan Roese
Cc:
Hi Heiko,
On Thu, 2014-01-30 at 06:20 +0100, Heiko Schocher wrote:
> Hello Chin,
>
> Am 22.01.2014 16:37, schrieb Chin Liang See:
> > Thanks Alexey.
> >
> > Hi Heiko,
> >
> > I believe this patch should be good for apply. Would need your help
> > then. :) Thanks
> >
> > Chin Liang
> >
> >
> > On
Tom Rini writes:
> When we tell the compiler to optimize for ARMv7 it assumes a default of
> unaligned accesses being supported at the hardware level and can make
> use of this to perform what it deems as an optimization in any case,
> including allowing for data to become unaligned. We explicit
On 02/04/2014 04:25 AM, Dennis Gilmore wrote:
> describe a set of default features that distros can rely on being available.
> having this common definition means that distros can easily support systems
> implementing them.
The series,
Reviewed-by: Stephen Warren
Tested-by: Stephen Warren
A cha
On Wed, Jan 22, 2014 at 2:18 PM, Michal Simek wrote:
> Timeout calculation should be out of the data loop.
> This patch increase spi bandwidth for 30%.
>
> Signed-off-by: Michal Simek
> ---
>
> drivers/spi/xilinx_spi.c | 8 +---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --gi
In some cases MMC was still uninitialized while media capacity check,
leading to broken ums command.
Tested on Samsung Goni.
Signed-off-by: Mateusz Zalega
Cc: Minkyu Kang
---
Changes since v1:
- patch conforms to kernel coding style
- moved mmc_init() check to ums_init()
---
board/samsung/comm
When we tell the compiler to optimize for ARMv7 it assumes a default of
unaligned accesses being supported at the hardware level and can make
use of this to perform what it deems as an optimization in any case,
including allowing for data to become unaligned. We explicitly disallow
this hardware f
mmc_init() doesn't call get_timer() anymore if MMC is already
initialized.
Signed-off-by: Mateusz Zalega
Cc: Pantelis Antoniou
Cc: Minkyu Kang
---
drivers/mmc/mmc.c | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index c6a1c23..7
Implementation made use of types defined in common.h, even though it
wasn't #included. It worked in circumstances when .c files included
every needed header (all).
Change-Id: Iafdd4f1997767e9eb84d583fd32c79c8c4d43afd
Signed-off-by: Mateusz Zalega
Cc: Minkyu Kang
Cc: Tom Rini
---
include/part.h
UMS-related defines were added to Samsung Goni config header.
Signed-off-by: Mateusz Zalega
Cc: Minkyu Kang
---
include/configs/s5p_goni.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index d25c494..7314bff 100644
--- a/include/co
Structure definition used type block_dev_desc_t, defined in part.h, which
wasn't included in mmc.h. It worked only in circumstances when common.h,
or another header using part.h was incuded in implementation files.
Signed-off-by: Mateusz Zalega
Cc: Minkyu Kang
Cc: Tom Rini
---
include/mmc.h |
Signed-off-by: Mateusz Zalega
Cc: Minkyu Kang
---
include/configs/s5p_goni.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 24a0fcc..d25c494 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -72,6 +
Future patches will make DFU too large to fit in this board's SPL build.
Signed-off-by: Mateusz Zalega
Cc: Tom Rini
Cc: Lukasz Majewski
---
include/configs/am335x_evm.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 73a9a
Preprocessor definitions and hardcoded implementation selection in
g_dnl core were replaced by a linker list made of (usb_function_name,
bind_callback) pairs.
Signed-off-by: Mateusz Zalega
Cc: Lukasz Majewski
Cc: Marek Vasut
---
Changes since v1:
- reordered
---
common/cmd_dfu.c
When user attempted to perform a raw write using DFU (vide
dfu_fill_entity_mmc) with MMC interface not initialized before,
get_mmc_blk_size() reported invalid (zero) block size - it wasn't
possible to write ie. a new u-boot image.
This commit fixes that by initializing device in get_mmc_blk_size()
Configuration file for GONI has been updated to support FAT file system,
new mmc partitioning scheme and read linux kernel from eMMC instead of
OneNAND.
Change-Id: I00e55bc970512986f50b1f943021ba9de683795e
Signed-off-by: Arkadiusz Wlodarczyk
Signed-off-by: Kyungmin Park
Signed-off-by: Mateusz Za
This is an updated version of patch series regarding DFU, MMC, USB Gadget and
Samsung Goni board, originally sent on 10 January 2014.
---
Changes since v1:
- reordered
"USB: gadget: added a saner gadget downloader registration API"
- fixed a bug related to usb_cable_connected() which broke previ
Proper adjustment for supporting DFU by Goni target has been made.
The s5p_goni.h file has been updated. Moreover, the code for low level
USB initialization has been added to Goni board code.
The malloc pool has been enlarged in order to support larger buffer
sizes needed by DFU implementation.
S
Former usb_cable_connected() patch broke compilation of boards which do
not support this feature.
Signed-off-by: Mateusz Zalega
Cc: Lukasz Majewski
---
common/cmd_usb_mass_storage.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage
On 14-02-03 11:22 PM, Heiko Schocher wrote:
> Hello Darwin,
>
> Am 03.02.2014 23:12, schrieb Darwin Rambo:
>> Add support for the Kona I2C controller found on Broadcom mobile SoCs.
>>
>> Signed-off-by: Darwin Rambo
>> Reviewed-by: Steve Rae
>> Reviewed-by: Tim Kryger
>> ---
>
> What has changed
On 14-02-03 05:12 PM, Jaehoon Chung wrote:
> On 02/04/2014 06:03 AM, Darwin Rambo wrote:
>> Add support for the Kona SDHCI found on Broadcom mobile SoCs.
>>
>> Signed-off-by: Darwin Rambo
>> Reviewed-by: Steve Rae
>> Reviewed-by: Tim Kryger
>> ---
>> drivers/mmc/Makefile |1 +
>> driv
Squash the malloc()+memset() combo in favor of calloc().
Signed-off-by: Jagannadha Sutradharudu Teki
---
drivers/mtd/spi/sf_ops.c | 8 ++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 1f1bb36..ef91b92 100644
--- a/dr
1 - 100 of 189 matches
Mail list logo
