Dear Rajeshwari and Simon,
On 12/03/13 15:13, Rajeshwari Birje wrote:
> Hi Minkyu,
>
> Yes it is based on the following patches submitted by Simon Glass and
> link for the same.
>
> "sf: Add spi_flash_alloc() to create a new SPI flash struct"
> http://patchwork.ozlabs.org/patch/208228/
>
> "sf:
On Wednesday 27 March 2013 10:41 AM, Sricharan R wrote:
On Wednesday 27 March 2013 09:55 AM, Lokesh Vutla wrote:
EMIF supports a global warm reset mode, during which the
EMIF keeps the SDRAM content. But if leveling is enabled
at the time of warm reset for DDR3, the following steps
needs to be d
Dear Amar,
On 27/03/13 14:18, Amarendra Reddy wrote:
> Dear Minkyu,
>
please don't top posting.
> The definition of "RX_WMARK" is present in "[PATCH V7 04/10] EXYNOS5: DWMMC:
> Added FDT support for DWMMC".
>
> Here is the URL,
> http://www.mail-archive.com/u-boot@lists.denx.de/msg107515.htm
Dear Minkyu,
Please refer to the latest version of emmc patchset, which is V7 patchset.
The function definition 'exynos_dwmci_init()' has been changed when
compared to V1 patchset.
Here is the URL for latest version.
http://www.mail-archive.com/u-boot@lists.denx.de/msg107511.html
Thanks & Regar
Dear Minkyu,
The definition of "RX_WMARK" is present in "[PATCH V7 04/10] EXYNOS5:
DWMMC: Added FDT support for DWMMC".
Here is the URL,
http://www.mail-archive.com/u-boot@lists.denx.de/msg107515.html
Thanks & Regards
Amarendra Reddy
On 27 March 2013 10:33, Minkyu Kang wrote:
> Dear Amar,
>
>
Dear Amar,
On 05/12/12 22:31, Amar wrote:
> This patch defines the call back required by dw mmc driver to get the
> clock value. It also adds function to set the dw mmc clock divider ratio.
>
> Signed-off-by: Amarendra Reddy
> ---
> drivers/mmc/exynos_dw_mmc.c | 14 +-
> 1 files c
On Wednesday 27 March 2013 09:55 AM, Lokesh Vutla wrote:
> EMIF supports a global warm reset mode, during which the
> EMIF keeps the SDRAM content. But if leveling is enabled
> at the time of warm reset for DDR3, the following steps
> needs to be done after warm reset:
> 1) Keep EMIF in self refres
Dear Amar,
On 05/12/12 22:31, Amar wrote:
> The current implementation of fifo size computation was giving improper
> values for eMMC channel. Modified the computation as per user manual.
>
> Signed-off-by: Amarendra Reddy
> ---
> drivers/mmc/dw_mmc.c |2 ++
> 1 files changed, 2 insertions(
Please test the Patch. It is very simple on a Beagleboard. I guess you
have flashed the actual SPL and u-boot and Beagleboard boots correctly.
Now press and hold 'User' button and connect power. SPL should hang.
You can see some symbols on the console from the ROM code.
Install the Patch, compile
EMIF supports a global warm reset mode, during which the
EMIF keeps the SDRAM content. But if leveling is enabled
at the time of warm reset for DDR3, the following steps
needs to be done after warm reset:
1) Keep EMIF in self refresh mode.
2) Reset PHY to bring back the PHY to a known state.
3) Sta
Hi Nishanth,
On Tuesday 26 March 2013 08:50 PM, Nishanth Menon wrote:
> This series helps standardize register parameters for TWL4030, 6030 and 6035
> used in various OMAP3,4,5 based platforms.
>
> For historical reasons, we have been following val, reg as the order of
> parameters while we have
Dear Arkadiusz Wlodarczyk,
On 18/02/13 19:18, a.wlodarc...@samsung.com wrote:
> From: Arkadiusz Wlodarczyk
>
> Signed-off-by: Arkadiusz Wlodarczyk
> Signed-off-by: Kyungmin Park
> Tested-by: Arkadiusz Wlodarczyk
> Cc: Minkyu Kang
> ---
> Changes
> Switch on USB gadget mass storage and ums co
Dear Arkadiusz Wlodarczyk,
On 18/02/13 19:18, a.wlodarc...@samsung.com wrote:
> From: Arkadiusz Wlodarczyk
>
> Signed-off-by: Arkadiusz Wlodarczyk
> Signed-off-by: Kyungmin Park
> Tested-by: Arkadiusz Wlodarczyk
> Cc: Minkyu Kang
> ---
> Changes
> This change encompasses set of adjustments i
Often it happens that patches include tags which don't have aliases. It
is annoying that patman fails in this case, and provides no option to
continue other than adding empty tags to the .patman file.
Correct this by adding a '-t' option to ignore tags that don't exist.
Print a warning instead.
S
A few of the help messages are not quite right, and there is a typo
in the README. Fix these.
Signed-off-by: Simon Glass
Reviewed-by: Doug Anderson
---
Changes in v2: None
tools/patman/README| 2 +-
tools/patman/patman.py | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --g
This comment is less than helpful. Since multiple tags are supported, add
an example of how multiple tags work.
Signed-off-by: Simon Glass
Reviewed-by: Doug Anderson
---
Changes in v2: None
tools/patman/commit.py | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/pa
For some series with lots of changes it is annoying that duplicate change
log items are not caught. It is also helpful sometimes to sort the change
logs.
Add a Series-process-log tag to enable this, which can be placed in a
commit to control this.
The change to the Cc: line is to fix a checkpatch
At present something like:
Revert "arm: Add cache operations"
will try to use
Revert "arm
as a tag. Clearly this is wrong, so fix it.
If the revert is intended to be tagged, then the tag can come before
the revert, perhaps. Alternatively the 'Cc' tag can be used in the commit
messages.
Especially with the Linux kernel, it takes a long time (a minute or more)
to test-apply the patches, so patman becomes significantly less useful.
The only real problem that is found with this apply step is trailing spaces.
Provide a -a option to skip this step, for those working with clean patches.
checkpatch has a new type of warning, a 'CHECK'. At present patman fails
with these, which makes it less than useful.
Add support for checks, making it backwards compatible with the old
checkpatch.
At the same time, clean up formatting of the CheckPatches() output,
fix erroneous "internal error"
Since checkpatch has changed in U-Boot, patman no longer detects errors
properly. It seems like a good oppotunity to fix some of the bugs and
annoying habits of patman that people have mentioned on the list.
If I have missed any bugs / problems in this sweep, please let me know.
Changes in v2:
-
Hi Doug,
On Thu, Mar 21, 2013 at 10:09 AM, Doug Anderson wrote:
> Simon,
>
> Nothing critical and this could go in as-is, but a few nits below.
>
>
> On Wed, Mar 20, 2013 at 7:42 PM, Simon Glass wrote:
>> -raw += LookupEmail(item, alias)
>> +raw += LookupEmail(item, alias, raise_
Hi Doug,
On Thu, Mar 21, 2013 at 10:51 AM, Doug Anderson wrote:
> Simon,
>
> On Wed, Mar 20, 2013 at 7:43 PM, Simon Glass wrote:
>> For some series with lots of changes it is annoying that duplicate change
>> log items are not caught. It is also helpful sometimes to sort the change
>> logs.
>>
>
Hi Doug,
On Thu, Mar 21, 2013 at 9:50 AM, Doug Anderson wrote:
> Simon,
>
> On Wed, Mar 20, 2013 at 7:42 PM, Simon Glass wrote:
>> # Separates a tag: at the beginning of the subject from the rest of it
>> -re_subject_tag = re.compile('([^:]*):\s*(.*)')
>> +re_subject_tag = re.compile('([^:"]*):
Hi Doug,
On Thu, Mar 21, 2013 at 9:35 AM, Doug Anderson wrote:
> Simon,
>
> On Wed, Mar 20, 2013 at 7:42 PM, Simon Glass wrote:
>> checkpatch has a new type of warning, a 'CHECK'. At present patman fails
>> with these, which makes it less than useful.
>>
>> Add support for checks, making it back
Allow the user to specify two UBI volumes to use for the environment
Signed-off-by: Joe Hershberger
---
Changes in v2:
- Added curly braces on "multi-line" statements
README| 6 +++
common/env_ubi.c | 117 ++
include/environ
The env in UBI needs to look up the mtd partition as part of relocation,
which happens before relocation. Make the mtdparts code capable of
working on the default env to start with.
The code tries to set values in the env as well, but again, the env
isn't there yet, so add a check to setenv to no
The unwind code was not reversing operations correctly and was causing
a hang on any error condition.
Signed-off-by: Joe Hershberger
---
Changes in v2:
- Fixed error handling bug that prevents fail-over to default env on error
drivers/mtd/ubi/build.c | 8
drivers/mtd/ubi/wl.c| 1 +
NAND is not good at handling absolute addresses to sectors for storing
particular data. The current implementation of the NAND env support
works around this in several ways such as storing a pointer to the
sector in the OOB of the first sector (interferes with some CRC) or
supporting a range of se
UBI is a better place for the environment on NAND devices because it
handles wear-leveling and bad blocks.
Gluebi is needed in Linux to access the env as an MTD partition.
Signed-off-by: Joe Hershberger
---
Changes in v2: None
README| 15
common/Makefile | 1 +
Part, Read, and Write functionality that will be used by env_ubi.
Signed-off-by: Joe Hershberger
---
Changes in v2:
- Added curly braces on "multi-line" statements
- Added extern consistently in header
common/cmd_ubi.c| 150 +---
include/ubi_u
The prints are out of control. SILENCE!
Signed-off-by: Joe Hershberger
---
Changes in v2:
- Cleaned up the msg print silencing
common/cmd_ubi.c | 3 +++
drivers/mtd/mtdpart.c | 14 --
drivers/mtd/ubi/ubi.h | 4
fs/ubifs/ubifs.h | 4
4 files changed, 19 insert
Signed-off-by: Benoît Thébaudeau
---
Changes in v3:
- New patch.
Changes in v2: None
doc/README.imx25 | 10 ++
doc/README.imx27 | 10 ++
doc/README.imx5 |6 ++
doc/README.imx6 | 10 ++
4 files changed, 36 insertions(+)
create mode 100644 doc/README.imx2
Signed-off-by: Benoît Thébaudeau
---
Changes in v3: None
Changes in v2:
- Rebase against latest master.
arch/powerpc/cpu/mpc512x/Makefile |1 -
arch/powerpc/cpu/mpc512x/iim.c | 394 ---
board/davedenx/aria/aria.c |2 +-
board/esd/
This can be useful for fuse-like hardware, OTP SoC options, etc.
Signed-off-by: Benoît Thébaudeau
---
Changes in v3:
- Rebase against latest u-boot-imx/master.
- Update copyright years.
- Rename the "ovride" command to "override" as it is nicer to read.
- For obvious safety reasons, ask the u
This allows to test the iim driver in the mainline tree.
Signed-off-by: Benoît Thébaudeau
---
Changes in v3:
- New patch.
Changes in v2: None
include/configs/mx51evk.h |4
1 file changed, 4 insertions(+)
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index cb3d93
Add a fsl_iim driver common to i.MX and MPC.
Signed-off-by: Benoît Thébaudeau
---
Changes in v3:
- Update copyright years.
- Rename "row" to "word" since it is less confusing and it is vocabulary common
to iim and ocotp in the reference manuals.
- Add doc/README.fsl_iim.
Changes in v2:
-
IIM:
- Homogenize prg_p naming (the reference manuals are not always self-consistent
for that).
- Add missing SCSx and bank registers.
- Fix the number of banks on i.MX53.
OCOTP:
- Rename iim to ocotp in order to avoid confusion.
- Rename fuse_data to read_fuse_data, and sticky to sw_stick
Define the UID (SoC unique ID) fuses, and the fuses available for the user.
Signed-off-by: Benoît Thébaudeau
---
Changes in v3:
- Add i.MX6 GP2.
Changes in v2:
- Rebase against latest master.
arch/arm/include/asm/arch-mx25/imx-regs.h | 11 ++-
arch/arm/include/asm/arch-mx31/imx-reg
Hi,
access to part->start_sect in pmbr_part_valid() (form disk/part_efi.c) and
propably other positions/fields causes an unaligned access on ARM (tegra in my
case) and a uboot crash. This was introduced by commit fae2bf22 [1] which
changed le32_to_int (which is a byte access) to le32_to_cpu (wh
Hi Eric,
On Tue, Mar 26, 2013 at 12:24 PM, Eric Nelson
wrote:
> Since this convention is shared among at least SABRE Lite, SABRE SD,
> Nitrogen6x and Wandboard, wouldn't a weak function in imx-common/cpu.c
> be a better choice?
>
> +#ifdef CONFIG_REVISION_TAG
> +u32 __weak get_board_rev(void)
>
On Tue, Mar 26, 2013 at 10:52 AM, Tom Warren wrote:
> Some 3rd-party flash tools use the -v (verify) option of crc32 command.
>
> Signed-off-by: Tom Warren
Acked-by: Simon Glass
> ---
> include/configs/tegra-common.h | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/include/configs/t
Some 3rd-party flash tools use the -v (verify) option of crc32 command.
Signed-off-by: Tom Warren
---
include/configs/tegra-common.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 036ded0..30dc736 100644
--- a/include/c
Dear Alexandre,
In message <1822628084.945501.1364317027872.javamail.r...@openwide.fr> you
wrote:
>
> In fact I would like to keep the bootcount value after a shutdown
> to handle update failures. Some embedded systems have only network
> access for administration and if you install an updated sy
Hi Dirk,
On Tue, Mar 26, 2013 at 12:43 PM, Dirk Behme wrote:
> Hi Fabio,
>
>
> On 26.03.2013 13:54, Fabio Estevam wrote:
>>
>> Currently when booting a mx6 solo processor get_cpu_rev() returns 0x62xxx,
>> which
>> is an invalid mx6 CPU revision.
>
>
> Do you have somewhere a list of valid CPU rev
> > Hi,
> >
>
> Hi Alexandre,
Hi Stefano,
> > I'm working on an open source automatic updater for embedded
> > systems. The goal of this project is to split a flash memory or
> > disk in multiple partition (2 or more) and install a new root
> > filesystem on an empty or outdated partition.
> >
Hi Fabio,
On 26.03.2013 13:54, Fabio Estevam wrote:
Currently when booting a mx6 solo processor get_cpu_rev() returns 0x62xxx, which
is an invalid mx6 CPU revision.
Do you have somewhere a list of valid CPU revisions? From two points of
view:
a) the i.MX6 hardware spec
b) the VPU library
On Monday 25 March 2013 20:29:23 Anatolij Gustschin wrote:
> Hi,
>
> On Sun, 24 Mar 2013 01:53:08 +0100
>
> Anatolij Gustschin wrote:
> > From: Pali Rohár
> >
> > The "bootmenu" command uses U-Boot menu interfaces and
> > provides a simple mechanism for creating menus with several
> > boot ite
On 03/26/2013 08:24 AM, Eric Nelson wrote:
Hi Fabio,
>
>
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -330,7 +330,7 @@ int board_mmc_init(bd_t *bis)
u32 get_board_rev(void)
{
-return 0x63000;
+return get_cpu_rev();
}
#ifdef CON
Hi Fabio,
On 03/15/2013 02:06 PM, Fabio Estevam wrote:
From: Fabio Estevam
As nitrogen6x boards support different i.MX6 flavors (quad, dual-lite and solo)
the correct CPU revision needs to passed to the kernel, so call get_cpu_rev()
instead of hardcoding it.
Freescale 3.0.35 kernel assumes th
u-boot standard i2c read prototype is
i2c_read(addr, reg, 1, &buf, 1)
twl4030_i2c_read_u8(u8 addr, u8 *val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-boot i2c operations:
twl4030_i2c_read_u8(u8 addr, u8 reg, u8 *val)
Signed-off-by: Nishanth Meno
u-boot standard i2c register write prototype is
i2c_reg_write(u8 addr, u8 reg, u8 val)
twl4030_i2c_write_u8(u8 addr, u8 val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-boot i2c operations:
twl4030_i2c_write_u8(u8 addr, u8 reg, u8 val)
Signed-off-
twl6030_i2c_[read|write]_u8 can be used else where to access
multi-function device such as twl6030, so move the register access
functions to the common twl6030.h header file.
Signed-off-by: Nishanth Menon
---
V2: http://patchwork.ozlabs.org/patch/230259/
Changes since v2:
- no change
dri
Add an header guard to common header file to prevent multiple
includes messing things up.
Signed-off-by: Nishanth Menon
---
V2: http://patchwork.ozlabs.org/patch/230264/
Changes since V2:
- use PALMAS instead of TWL6035
include/palmas.h |4
1 file changed, 4 insertions(+)
diff
TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs
Rename twl6035 to palmas to allow reuse across multiple current and
future platforms
As part of this change, change the CONFIG_TWL6035_POWER to
CONFIG_PALMAS_POWER and update usage of header file accordingly.
Signed-off-by: Nishant
Since TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs,
rename twl6035_init_settings with an more generic palmas_init_settings
Signed-off-by: Nishanth Menon
---
V3: new patch
board/ti/omap5_evm/evm.c |2 +-
drivers/power/palmas.c |2 +-
include/palmas.h |2
Add an header guard to common header file to prevent multiple includes
messing things up.
Signed-off-by: Nishanth Menon
---
V2: http://patchwork.ozlabs.org/patch/230265/
Changes since v2:
- no change
include/twl6030.h |5 +
1 file changed, 5 insertions(+)
diff --git a/include/tw
Since TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs,
rename twl6035_mmc1_poweron_ldo by a more generic palmas_mmc1_poweron_ldo
function.
Signed-off-by: Nishanth Menon
---
V3: new patch
drivers/mmc/omap_hsmmc.c |2 +-
drivers/power/palmas.c |2 +-
include/palmas.h
u-boot standard i2c register access prototype is
i2c_read(addr, reg, 1, &buf, 1)
i2c_reg_write(u8 addr, u8 reg, u8 val)
twl6030_i2c_read_u8(u8 addr, u8 *val, u8 reg)
twl6030_i2c_write_u8(u8 addr, u8 val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-
This series helps standardize register parameters for TWL4030, 6030 and 6035
used in various OMAP3,4,5 based platforms.
For historical reasons, we have been following val, reg as the order of
parameters while we have reg, val in every other i2c apis including i2c
mw/mr command @ u-boot cmd line, w
commit 21144298 (power: twl6035: add palmas PMIC support)
introduced twl6035_i2c_[read|write]_u8
Then, commit dd23e59d (omap5: pbias ldo9 turn on)
introduced palmas_[read|write]_u8 for precisely the same access
function. TWL6035 belongs to the palmas family, so instead of having
an twl6035 API, we
Hi Fabio,
On 03/26/2013 05:54 AM, Fabio Estevam wrote:
Currently when booting a mx6 solo processor get_cpu_rev() returns 0x62xxx, which
is an invalid mx6 CPU revision. This causes run-time problems when trying to use
VPU library in the kernel, as this library loads the VPU firmware according
to
On Thu, Mar 21, 2013 at 03:00:04PM +0100, Peter Korsgaard wrote:
> Gets rid of warnings from omap_gpio:
> ERROR : check_gpio: invalid GPIO -1
>
> (and undefined behaviour as the -1 error code is interpreted as gpio value)
>
> Signed-off-by: Peter Korsgaard
Applied to u-boot-ti/master (and alre
On Thu, Mar 21, 2013 at 04:30:02AM -, Tom Rini wrote:
> Tested-by: Rao Bodapati
> Signed-off-by: Tom Rini
Applied to u-boot-ti/master (and already pulled into u-boot-arm),
thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot
On Fri, Mar 15, 2013 at 02:32:35AM -, Enric Balletbo i Serra wrote:
> From: Enric Balletbo i Serra
>
> With v3.9 and later of the Linux Kernel defaulting to multi-platform
> images with omap2plus_defconfig, uImage isn't builtable anymore by
> default. Add CONFIG_CMD_BOOTZ so that we can sti
On Fri, Mar 15, 2013 at 01:35:37AM -, Enric Balletbo i Serra wrote:
> From: Enric Balletbo i Serra
>
> Just fix a typo displaying the CPU info. With CONFIG_DISPLAY_INFO we see
> something like AMAM335X-GP rev 0 instead of AM335X-GP rev 0.
>
> Signed-off-by: Enric Balletbo i Serra
> Reviewe
On Thu, Mar 14, 2013 at 09:11:16PM -, hvaib...@ti.com wrote:
> Enable DDR PHY dynamic power down bit, which enables
> powering down the IO receiver when not performing read.
>
> This also helps in reducing overall power consumption in
> low power states (suspend/standby).
>
> Signed-off-by:
On Thu, Mar 14, 2013 at 11:15:25AM -, Tom Rini wrote:
> - In arch/arm/cpu/armv7/omap-common/timer.c,
> drivers/mtd/nand/omap_gpmc.c and drivers/net/cpsw.c add #include files
> that the driver needs but had been relying on to bring in.
> - In arch/arm/cpu/armv7/omap-common/lowlevel_init.S
On Fri, Mar 08, 2013 at 07:40:58AM -, Tom Rini wrote:
> From: Steve Kipisz
>
> The original write to sdram_config is correct for DDR3 but incorrect
> for DDR2 so SPL was hanging. For DDR2, the write to sdram_config
> should be after the writes to ref_ctrl. This was working for DDR3
> because
On Thu, Mar 14, 2013 at 06:49:04AM -, Tom Rini wrote:
> All of these platforms have memory starting at 0x8000, so this is
> the correct CONFIG_STANDALONE_LOAD_ADDR for all of them.
>
> Signed-off-by: Tom Rini
> Acked-by: Peter Korsgaard
Applied to u-boot-ti/master (and already pulled i
On Thu, Mar 14, 2013 at 05:55:19AM -, Tom Rini wrote:
> From: Koen Kooi
>
> Cc: Matt Porter
> Cc: Nishanth Menon
> Signed-off-by: Koen Kooi
> Signed-off-by: Tom Rini
> Acked-by: Matt Porter
> Acked-by: Peter Korsgaard
> Acked-by: Nishanth Menon
Along with the rest of the series, appl
On Mon, Mar 04, 2013 at 01:27:20AM -, Mark Jackson wrote:
> Allow AM335x MPU core clock speed to be specified in the board config file.
> To use, add the following to the board's config file:-
>
> #define CONFIG_SYS_MPUCLK
>
> Signed-off-by: Mark Jackson
> Acked-by: Peter Korsgaard
A
On Thu, Feb 21, 2013 at 02:49:38AM -, Mark Jackson wrote:
> Currently WAIT0 irq is reset and then WAIT1 irq is enabled.
> Fix it such that WAIT0 irq is enabled instead.
>
> Signed-off-by: Mark Jackson
> Acked-by: Peter Korsgaard
Applied to u-boot-ti/master (and already pulled into u-boot-a
On Sat, Dec 22, 2012 at 09:03:48PM -, Nikita Kiryanov wrote:
> Add support for loading splash image from NAND
>
> Signed-off-by: Nikita Kiryanov
> Signed-off-by: Igor Grinberg
Applied to u-boot-ti/master (and already pulled into u-boot-arm),
thanks!
--
Tom
signature.asc
Description: Di
On Thu, Mar 21, 2013 at 03:00:03PM +0100, Peter Korsgaard wrote:
> Let mmc_getcd() return true and mmc_getwp() false if mmc driver doesn't
> provide handlers for them.
>
> Signed-off-by: Peter Korsgaard
> ---
> drivers/mmc/mmc.c | 14 ++
> 1 file changed, 10 insertions(+), 4 delet
On Fri, Mar 15, 2013 at 04:07:01PM -0400, Matt Porter wrote:
> This series adds support for the PG1.0 TI814x EVM board. TI814x
> fits into the existing AM33XX SoC support with some refactoring
> of the AM33XX-specific emif4, clock, and mux code.
>
> It has been tested booting up a Linux kernel an
Dear egbert.e...@googlemail.com,
In message <1364288765-2637-1-git-send-email-egbert.e...@gmail.com> you wrote:
> From: Egbert Eich
>
> Devices that used to have a whole disk FAT filesystem but got then
> partitioned will most likely still have a FAT or FAT32 signature
> in the first sector as t
Dear egbert.e...@googlemail.com,
In message <1364288746-2597-1-git-send-email-egbert.e...@gmail.com> you wrote:
> From: Egbert Eich
>
> The gpt command was only implemented for mmc devices. There is no reason
> why this command should not be generalized and be applied all other
> storage device
From: Egbert Eich
Devices that used to have a whole disk FAT filesystem but got then
partitioned will most likely still have a FAT or FAT32 signature
in the first sector as this sector does not get overwritten by
a partitioning tool (otherwise the tool would risk to kill the mbr).
The current pa
On Tuesday 26 March 2013 06:55 PM, Nishanth Menon wrote:
> On 15:01-20130326, Sricharan R wrote:
>> approach we will end up creating a new tps659038.h which does exactly
>> the same thing. This does not feel correct. Can't we differentiate
>> using register nam
On 15:01-20130326, Sricharan R wrote:
> approach we will end up creating a new tps659038.h which does exactly
> the same thing. This does not feel correct. Can't we differentiate
> using register names that are passed instead ?
tps659038/twl6035/twl6037 all belong to palmas famil
From: Egbert Eich
The gpt command was only implemented for mmc devices. There is no reason
why this command should not be generalized and be applied all other
storage device classes.
This change both simplifies the implementation and eliminates a
build failure for systems that don't support mmcs.
From: Egbert Eich
This value serves as the shift value used to calculate the block number
to read in file systems when implementing aviable block sizes.
Signed-off-by: Egbert Eich
---
common/cmd_ide.c |5 +
common/cmd_sata.c |1 +
common/cmd_scsi.c |4 +
From: Egbert Eich
Disks beyond 2T in size use blocksizes of 4096 bytes. However a lot of
code in u-boot still assumes a 512 byte blocksize.
Signed-off-by: Egbert Eich
---
disk/part_efi.c| 38 ++
include/common.h | 11 +--
include/part.h
From: Egbert Eich
The 512 byte block size was hard coded in the ext4 file systems. Large
harddisks today support bigger block sizes typically 4096 bytes.
Signed-off-by: Egbert Eich
---
fs/ext4/dev.c | 60 +++
fs/ext4/ext4_common.c | 42
From: Egbert Eich
Devices that used to have a whole disk FAT filesystem but got then
partitioned will most likely still have a FAT or FAT32 signature
in the first sector as this sector does not get overwritten by
a partitioning tool (otherwise the tool would risk to kill the mbr).
The current pa
From: Egbert Eich
The gpt command was only implemented for mmc devices. There is no reason
why this command should not be generalized and be applied all other
storage device classes.
This change both simplifies the implementation and eliminates a
build failure for systems that don't support mmcs.
Currently when booting a mx6 solo processor get_cpu_rev() returns 0x62xxx, which
is an invalid mx6 CPU revision. This causes run-time problems when trying to use
VPU library in the kernel, as this library loads the VPU firmware according
to the CPU type.
Fix get_cpu_rev() so that it correctly retu
Dear Inderpal Singh,
In message <1364290670-7443-4-git-send-email-inderpal.si...@linaro.org> you
wrote:
> Arndale board is based on samsung's exynos5250 soc.
WARNING: Avoid CamelCase:
#618: FILE: board/samsung/arndale/clock_init.c:213:
+ .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTER
On Tue, Mar 26, 2013 at 1:23 AM, Alexandre Pereira da Silva
wrote:
> The netargs variable was referencing the non-existing variable
> console_mainline. Change that to console variable instead.
>
> Signed-off-by: Alexandre Pereira da Silva
Acked-by: Otavio Salvador
Thanks by spotting it, it is
Dear egbert.e...@googlemail.com,
In message <1364285735-2364-6-git-send-email-egbert.e...@gmail.com> you wrote:
> From: Egbert Eich
>
> The 512 byte block size was hard coded in the ext4 file systems. Large
> harddisks today support bigger block sizes typically 4096 bytes.
>
> Signed-off-by: Eg
Dear egbert.e...@googlemail.com,
In message <1364285735-2364-5-git-send-email-egbert.e...@gmail.com> you wrote:
> From: Egbert Eich
>
> This value serves as the shift value used to calculate the block number
> to read in file systems when implementing aviable block sizes.
>
> Signed-off-by: Egb
Dear egbert.e...@googlemail.com,
In message <1364285735-2364-2-git-send-email-egbert.e...@gmail.com> you wrote:
> From: Egbert Eich
>
> Disks beyond 2T in size use blocksizes of 4096 bytes. However a lot of
> code in u-boot still assumes a 512 byte blocksize.
>
> Signed-off-by: Egbert Eich
>
Dear egbert.e...@googlemail.com,
In message <1364284913-2277-1-git-send-email-egbert.e...@gmail.com> you wrote:
> From: Egbert Eich
>
> The gpt command was only implemented for mmc devices. There is no reason
> why this command should not be generalized and be applied all other
> storage device
Hi Inderpal Singh,
I observed even this defined twice can you please remove the same also
in your patch.
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_MAX77686
Regards,
Rajeshwari Shinde.
On Tue, Mar 26, 2013 at 3:07 PM, Inderpal Singh
wrote:
> They have been def
Hi Tom,
On Mon, 25 Mar 2013 10:43:22 -0700, Tom Warren
wrote:
> Albert,
>
> Please pull u-boot-tegra/master into ARM/master. Thanks!
>
> ./MAKEALL for all the Tegra boards is OK, running a ./MAKEALL -a arm
> now. Checkpatch.pl is clean.
>
> The following changes since commit b6379e15a70cc2e22
Not all boards based on exynos5250 have SPI flash, same serial port and might
not require the same lds script. Hence move them to board specific config file
Signed-off-by: Inderpal Singh
---
include/configs/exynos5250-dt.h |8 +---
include/configs/smdk5250.h | 12 ++--
inc
They have been defined once already. Hence remove the redundant definitions.
Signed-off-by: Inderpal Singh
---
include/configs/exynos5250-dt.h | 21 -
1 file changed, 21 deletions(-)
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 73085
The Arndale board is based on samsung's exynos5250 SOC.
First patch just removes the redundant SPI configs from common exynos5250
config file. Second patch moves the board specific configs to board specific
config file. The third adds the andale board support.
This patchset depends on [1] for tzp
Hi Minkyu,
On Thu, 21 Mar 2013 18:54:28 +0900, Minkyu Kang
wrote:
> Dear Albert,
>
> The following changes since commit 9f024f62e4604274a23213dcee30016092e32e7b:
>
> Merge branch 'fixes' of git://git.denx.de/u-boot-mips (2013-02-15 12:23:42
> -0500)
>
> are available in the git repository
1 - 100 of 113 matches
Mail list logo
