Dear Arkadiusz Wlodarczyk,
On 18/02/13 19:18, a.wlodarc...@samsung.com wrote:
> From: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
>
> Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> Tested-by: Arkadiusz Wlodarczyk <a.wlodarc...@samsung.com>
> Cc: Minkyu Kang <mk7.k...@samsung.com>
> ---
> Changes
> This change encompasses set of adjustments in the configuration
> of the u-boot in the include/configs/s5p_goni.h, particularly
> change of rootfs type, change in kernel booting method and added DFU
> support. All those changes are connected with adjusting of existing
> goni configuration to latest changes in kernel.
> ---
> board/samsung/goni/goni.c | 7 +++++++
> include/configs/s5p_goni.h | 37 ++++++++++++++++++++++++++++++++-----
> 2 files changed, 39 insertions(+), 5 deletions(-)
>
> diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
> index ff76963..3c53106 100644
> --- a/board/samsung/goni/goni.c
> +++ b/board/samsung/goni/goni.c
> @@ -155,4 +155,11 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
> .regs_otg = S5PC110_OTG_BASE,
> .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
> };
> +
> +void board_usb_init(void)
> +{
> + debug("USB_udc_probe\n");
> + s3c_udc_probe(&s5pc110_otg_data);
> +}
I think, this is unrelated changes to subject.
> +
> #endif
> diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
> index 56e8347..8a824c7 100644
> --- a/include/configs/s5p_goni.h
> +++ b/include/configs/s5p_goni.h
> @@ -86,6 +86,17 @@
> #define CONFIG_CMD_ONENAND
> #define CONFIG_CMD_MTDPARTS
> #define CONFIG_CMD_MMC
> +#define CONFIG_CMD_DFU
> +
> +/* USB Composite download gadget - g_dnl */
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_MMC
> +
> +/* USB Samsung's IDs */
> +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
> +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
> +#define CONFIG_G_DNL_MANUFACTURER "Samsung"
>
> #define CONFIG_BOOTDELAY 1
> #define CONFIG_ZERO_BOOTDELAY_CHECK
> @@ -105,9 +116,13 @@
> ",60m(qboot)"\
> ",-(UBI)\0"
>
> +#define CONFIG_DFU_ALT \
> + "u-boot mmc 80 400;" \
> + "uImage fat 0 2\0" \
> +
> #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
>
> -#define CONFIG_BOOTCOMMAND "run ubifsboot"
> +#define CONFIG_BOOTCOMMAND "run mmcboot"
>
> #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
>
> @@ -137,7 +152,7 @@
> "onenand erase 0x01560000 0x1eaa0000;" \
> "onenand write 0x32000000 0x1260000 0x8C0000\0" \
> "bootk=" \
> - "onenand read 0x30007FC0 0xc00000 0x600000;" \
> + "run loaduimage;" \
> "bootm 0x30007FC0\0" \
> "flashboot=" \
> "set bootargs root=/dev/mtdblock${bootblock} " \
> @@ -156,21 +171,28 @@
> "set bootargs " CONFIG_RAMDISK_BOOT \
> " initrd=0x33000000,8M ramdisk=8192\0" \
> "mmcboot=" \
> - "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
> + "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
> + "rootfstype=${rootfstype}" \
> CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
> CONFIG_COMMON_BOOT "; run bootk\0" \
> "boottrace=setenv opts initcall_debug; run bootcmd\0" \
> "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
> "verify=n\0" \
> - "rootfstype=cramfs\0" \
> + "rootfstype=ext4\0" \
> "console=" CONFIG_DEFAULT_CONSOLE \
> "mtdparts=" MTDPARTS_DEFAULT \
> "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
> + "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
> + "mmcdev=0\0" \
> + "mmcbootpart=2\0" \
> + "mmcrootpart=5\0" \
> "mmcblk=/dev/mmcblk1p1\0" \
> "bootblock=9\0" \
> "ubiblock=8\0" \
> "ubi=enabled\0" \
> - "opts=always_resume=1"
> + "opts=always_resume=1\0" \
> + "dfu_alt_info=" CONFIG_DFU_ALT
> +
>
> /* Miscellaneous configurable options */
> #define CONFIG_SYS_LONGHELP /* undef to save memory */
> @@ -211,6 +233,10 @@
>
> #define CONFIG_DOS_PARTITION 1
>
> +/* FAT */
> +#define CONFIG_CMD_FAT
> +#define CONFIG_FAT_WRITE
> +
> #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
>
> #define CONFIG_SYS_CACHELINE_SIZE 64
> @@ -233,5 +259,6 @@
> #define CONFIG_USB_GADGET
> #define CONFIG_USB_GADGET_S3C_UDC_OTG
> #define CONFIG_USB_GADGET_DUALSPEED
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
>
> #endif /* __CONFIG_H */
>
Thanks,
Minkyu Kang.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
