Dear Wolfgang,
On Wednesday 13 July 2011 08:41 PM, Daniel Schwierzeck wrote:
[snip ..]
> gccincdir := $(shell $(CC) -print-file-name=include)
>
> +# Use section garbage collect for SPL if enabled by board config
> +# and current ARCH, CPU or SOC did not enable it already
> +ifeq ($(CONFIG_SPL_
Hi David,
On Thu, Jun 23, 2011 at 5:03 PM, Simon Glass wrote:
> Hi David,
>
> Thanks for the patch - I have tried this and things still work, but I
> don't think I have a Belkin F5D5055 Gig USB to test with. No matter.
>
> Please see below form comments.
>
> On Tue, May 31, 2011 at 5:58 AM, David
I have a question about how u-boot handles NAND blocks going bad over
time, for example when uncorrectable ECC errors or erase failures are
encountered for blocks which are not already in the Bad Block Table. I
know that u-boot properly skips already known bad blocks, but I can't
seem to find wher
Signed-off-by: Shaohui Xie
---
arch/powerpc/cpu/mpc8xxx/fdt.c |3 ++-
board/freescale/corenet_ds/corenet_ds.c |1 +
include/configs/corenet_ds.h|2 ++
3 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/
My client Late Engr. Jürgen Krügger bequeathed to you is will sum of USD
$30,100.000.00.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
This fixes up the SDRAM memory detection code to work with the
latest relocation code, moves it all into dram_init() and
activates memory size detection for the Integrator AP.
Signed-off-by: Linus Walleij
---
board/armltd/integrator/integrator.c | 17 +++--
include/configs/integrat
The Integrator AP with CM920T (ARM920T) does not boot without
D-cache disabled throughout, the actual problem comes at "bootm",
at this point U-Boot tries to disable D-cache which doesn't work
on this machine for some reason. The result is usually an
illegal instruction trap or similar as the PC go
This erratum doesn't exist on this processor, and the workaround
spins on a non-existent register, causing boot to hang.
Signed-off-by: Becky Bruce
---
include/configs/MPC8548CDS.h |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/include/configs/MPC8548CDS.h b/include/con
Rewrite the mxc_i2c driver.
* This version is much closer to Linux implementation.
* Fixes IPG_PERCLK being incorrectly used as clock source
* Fixes behaviour of the driver on iMX51
* Clean up coding style a bit ;-)
Based on commit: e39428d53d080ad2615b772d7f99d2a70c2aaab2
Date: Mon Jun 21 0
On Wednesday, July 13, 2011 03:56:45 PM Stefano Babic wrote:
> On 07/13/2011 11:53 AM, Marek Vasut wrote:
> > Rewrite the mxc_i2c driver.
> >
-- snip --
> > - while (!(readw(I2C_BASE + I2SR) & I2SR_IBB) && --timeout)
> > + while (timeout--) {
> > + if (readb(I2C_BASE + I2SR) & I2SR_I
Dear Marek Vasut,
In message <1310591152-3791-1-git-send-email-marek.va...@gmail.com> you wrote:
> Rewrite the mxc_i2c driver.
> * This version is much closer to Linux implementation.
> * Fixes IPG_PERCLK being incorrectly used as clock source
> * Fixes behaviour of the driver on iMX51
> * Cle
On Wednesday, July 13, 2011 03:49:00 PM Stefano Babic wrote:
> On 07/12/2011 02:16 AM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut
> > ---
> >
> > common/usb.c |2 +-
> > 1 files changed, 1 insertions(+), 1 deletions(-)
> >
> > diff --git a/common/usb.c b/common/usb.c
> > index 4f7c52
Rewrite the mxc_i2c driver.
* This version is much closer to Linux implementation.
* Fixes IPG_PERCLK being incorrectly used as clock source
* Fixes behaviour of the driver on iMX51
* Clean up coding style a bit ;-)
Signed-off-by: Marek Vasut
---
drivers/i2c/mxc_i2c.c | 424
如果该邮件无法正常显示，请点击这里
(http://www.webinternational.com.cn/makechanges/reg.aspx?ADID=457897&CityID=-1)
碰到老外的问路，你会憋到脸通红么？
回答外企HR的英文面试题，你只能说sorry么？
跟大洋彼岸的客户对发邮件，你把词典都翻烂了么？
当你的孩子碰到英文问题，你只会想到自己的英语挂了么？
即将出国留学，害怕自己英文学了10年，但一句都说不出来么？
(http://www.webinternational.com.cn/makechanges/reg.aspx?ADID=457897&CityID=-
> Dear Marek Vasut,
>
> In message <201107131912.45580.marek.va...@gmail.com> you wrote:
> >
> > > You have added an array with fixed values as indicated in the
> > > Freescale's manual (Table 26-7 for i.MX31, Table 40-7 for MX51, Table
> > > 41-12 for MX53). What about to add also some comments
Dear Marek Vasut,
In message <1310578117-7687-1-git-send-email-marek.va...@gmail.com> you wrote:
> Rewrite the mxc_i2c driver.
> * This version is much closer to Linux implementation.
> * Fixes IPG_PERCLK being incorrectly used as clock source
> * Fixes behaviour of the driver on iMX51
> * Cle
Dear Marek Vasut,
In message <201107131912.45580.marek.va...@gmail.com> you wrote:
>
> > You have added an array with fixed values as indicated in the
> > Freescale's manual (Table 26-7 for i.MX31, Table 40-7 for MX51, Table
> > 41-12 for MX53). What about to add also some comments about these cha
Dear Susan,
In message you wrote:
>
> Hi Chuck,
Hm... I'm not Chuck, hope this is OK as well.
> Can up update an outdated link on this page:
> http://lists.denx.de/pipermail/u-boot/2005-December/012848.html
Sorry, but this cannot be done. We don;t have a time machine yet, so
we cannot change
Rewrite the mxc_i2c driver.
* This version is much closer to Linux implementation.
* Fixes IPG_PERCLK being incorrectly used as clock source
* Fixes behaviour of the driver on iMX51
* Clean up coding style a bit ;-)
Signed-off-by: Marek Vasut
---
drivers/i2c/mxc_i2c.c | 414
On Wednesday, July 13, 2011 03:56:45 PM Stefano Babic wrote:
> On 07/13/2011 11:53 AM, Marek Vasut wrote:
> > Rewrite the mxc_i2c driver.
> >
> > * This version is much closer to Linux implementation.
> > * Fixes IPG_PERCLK being incorrectly used as clock source
> > * Fixes behaviour of the dri
On Wed, Jul 13, 2011 at 4:28 AM, Detlev Zundel wrote:
> Hi Anton,
>
> [...]
>
>> The only problem with this is that there is one piece of missing
>> information, which is how do you get the value of the field that is
>> masked as if it were a 4-bit or 3-bit number. That is, if I want the
>> IPS_D
Hi Chuck,
Can up update an outdated link on this page:
http://lists.denx.de/pipermail/u-boot/2005-December/012848.html
Please change http://www.ultsol.com/faq_p308.htm
TO
http://www.ultsol.com/index.php?option=com_jefaqpro&view=category&layout
=categorylist&task=lists&catid=9&Itemid=17
On 07/13/2011 05:23 PM, Fabio Estevam wrote:
> Hi Stefano,
>
Hi Fabio,
> On Wed, Jul 13, 2011 at 10:59 AM, Stefano Babic wrote:
> ...
>> -extern u32 mx31_get_ipg_clk(void);
>> -#define imx_get_uartclk mx31_get_ipg_clk
>> +enum mxc_clock {
>> + MXC_ARM_CLK = 0,
>> + MXC_IPG_CLK,
>> +
Hi Stefano,
On Wed, Jul 13, 2011 at 10:59 AM, Stefano Babic wrote:
...
> -extern u32 mx31_get_ipg_clk(void);
> -#define imx_get_uartclk mx31_get_ipg_clk
> +enum mxc_clock {
> + MXC_ARM_CLK = 0,
> + MXC_IPG_CLK,
> + MXC_CSPI_CLK,
> + MXC_UART_CLK,
I think the '= 0' can be
Le 13/07/2011 17:11, Daniel Schwierzeck a écrit :
> This patch series is the final proposal from Aneesh and myself for a
> generic SPL framework. The implementation already works and have been
> tested with in-tree and out-of-tree builds. The latest feedback
> from ML is already included.
Please,
Signed-off-by: Aneesh V
Signed-off-by: Daniel Schwierzeck
---
spl/Makefile | 11 +++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/spl/Makefile b/spl/Makefile
index f20092f..957825a 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -36,6 +36,17 @@ endif
LIBS-y += board
Signed-off-by: Aneesh V
Signed-off-by: Daniel Schwierzeck
---
spl/Makefile |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/spl/Makefile b/spl/Makefile
index 957825a..fda4049 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -47,6 +47,13 @@ LIBS-$(CONFIG_SPL_SPI_SUPPO
From: Aneesh V
replace all occurences of CONFIG_PRELOADER with CONFIG_SPL_BUILD
Signed-off-by: Aneesh V
---
README|2 +-
arch/arm/cpu/arm1136/start.S | 20 +-
arch/arm/cpu/arm1176/start.S |4 +-
arch/arm/cp
From: Aneesh V
Signed-off-by: Aneesh V
---
arch/arm/lib/Makefile |2 ++
common/Makefile |9 ++---
drivers/serial/Makefile |3 +++
fs/fat/Makefile |6 +-
lib/Makefile| 11 +++
5 files changed, 23 insertions(+), 8 deletions(-)
diff
From: Aneesh V
Signed-off-by: Aneesh V
---
arch/arm/config.mk | 11 ---
1 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 788d4c1..9184d06 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -56,9 +56,14 @@ PLATFORM_CP
Signed-off-by: Aneesh V
Signed-off-by: Daniel Schwierzeck
---
Makefile |5 +
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/Makefile b/Makefile
index 9478059..0707036 100644
--- a/Makefile
+++ b/Makefile
@@ -348,6 +348,7 @@ ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.b
Signed-off-by: Aneesh V
Signed-off-by: Daniel Schwierzeck
---
Makefile |3 ++-
config.mk | 36 +++-
2 files changed, 37 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index 62c2078..9478059 100644
--- a/Makefile
+++ b/Makefile
@@ -104,10 +1
Signed-off-by: Aneesh V
Signed-off-by: Daniel Schwierzeck
---
spl/.gitignore |4 ++
spl/Makefile | 101
2 files changed, 105 insertions(+), 0 deletions(-)
create mode 100644 spl/.gitignore
create mode 100644 spl/Makefile
diff --g
Signed-off-by: Daniel Schwierzeck
---
Makefile | 20 ++--
arch/blackfin/config.mk|2 +-
board/pcs440ep/config.mk |2 +-
board/spear/spear300/config.mk |2 +-
board/spear/spear310/config.mk |2 +-
board/spear/spear320/config.mk
This patch series is the final proposal from Aneesh and myself for a
generic SPL framework. The implementation already works and have been
tested with in-tree and out-of-tree builds. The latest feedback
from ML is already included.
How it works
There is a new directory TOPDIR/spl which contains
Hi Lukasz,
On 07/13/2011 06:29 PM, Lukasz Majewski wrote:
> This commit provides UDC driver support for Samsung's SoC
> family of processors.
>
[...]
> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
> index 7d5b504..6717e4f 100644
> --- a/drivers/usb/gadget/Makefile
> +++
This patch adds the USB Mass Storage Gadget to u-boot
New command called "ums" is implemented to provide access
to on-device embedded persistent memory.
USB Mass Storage is supposed to work on top of the USB
Gadget framework
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu
This patch adds support for USB Mass Storage Gadget on the
Samsung's GONI reference target
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Remy Bohmer
Cc: Minkyu Kang
---
board/samsung/goni/goni.c | 68
include/configs/s5p_goni.h
This commit is enabling support for USB Gadgets support
at GONI reference target
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang
Cc: Remy Bohmer
---
arch/arm/include/asm/arch-s5pc1xx/cpu.h|4 ++
arch/arm/include/asm/arch-s5pc1xx/hs_otg.h | 32
Presented patches provide Linux USB Gadget support for U-boot running
on the Samsung's SoC family of processors.
This patch series include UDC driver and example USB Mass Storage
gadger implementation.
---
Changes for v2:
- Patches have been divided in a more logical way
- Some #d
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 79642098a8345e2506ab0ff02e8c7ac4da405d0c:
Add support for Network Space v2 and parents (2011-07-04 10:55:28 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2
The patch provide the same API used with other i.MX
processors and get rid of mx31_ functions.
Signed-off-by: Stefano Babic
CC: Marek Vasut
---
arch/arm/cpu/arm1136/mx31/generic.c| 21 -
arch/arm/include/asm/arch-mx31/clock.h | 11 +--
drivers/spi/mxc_spi.c
On 07/13/2011 11:53 AM, Marek Vasut wrote:
> Rewrite the mxc_i2c driver.
> * This version is much closer to Linux implementation.
> * Fixes IPG_PERCLK being incorrectly used as clock source
> * Fixes behaviour of the driver on iMX51
> * Clean up coding style a bit ;-)
>
> Signed-off-by: Marek
On 07/13/2011 03:47 PM, Wolfgang Denk wrote:
>> No, I mean branch in u-boot-pxa ... since they are unrelated.
>
> Patches are normally picked up by the respective custodian. If you
> are anot the responsible custodian, you normally don't have to care
> about patches - actually this is usually eve
On 07/12/2011 02:16 AM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut
> ---
> common/usb.c |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/common/usb.c b/common/usb.c
> index 4f7c520..8e84266 100644
Hi Marek,
this should be checked by the USB maintainer, also i
Dear Marek Vasut,
In message <201107131529.21828.marek.va...@gmail.com> you wrote:
>
> > I'm a bit surprised by thi squestion. Yes, if you have any patches in
> > the pxa repository that shall go intoi mainline, then you are supposed
> > to send a pull request to Albert. Otherwise nothing will h
On 07/12/2011 02:16 AM, Marek Vasut wrote:
> From: Jana Rapava
>
> Signed-off-by: Jana Rapava
> ---
> include/configs/efikamx.h |2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
===
On 07/12/2011 02:16 AM, Marek Vasut wrote:
> From: Jana Rapava
>
> Signed-off-by: Jana Rapava
> ---
> boards.cfg |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
===
On 07/12/2011 02:16 AM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut
> ---
> include/configs/efikamx.h |1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
On 07/13/2011 03:29 PM, Marek Vasut wrote:
> On Wednesday, July 13, 2011 03:27:11 PM Wolfgang Denk wrote:
>> Dear Marek Vasut,
>>
>> In message <201107131503.59381.marek.va...@gmail.com> you wrote:
This has no place in the u-boot-pxa reporistory. Please make sure to
remove it there befor
On Wednesday, July 13, 2011 03:27:11 PM Wolfgang Denk wrote:
> Dear Marek Vasut,
>
> In message <201107131503.59381.marek.va...@gmail.com> you wrote:
> > > This has no place in the u-boot-pxa reporistory. Please make sure to
> > > remove it there before you send any pull requests to Albert.
> >
Dear Marek Vasut,
In message <201107131503.59381.marek.va...@gmail.com> you wrote:
>
> > This has no place in the u-boot-pxa reporistory. Please make sure to
> > remove it there before you send any pull requests to Albert.
>
> Shall I prepare a branch with the stuff I want up and send pull rq to
On Wednesday, July 13, 2011 02:32:41 PM Stefano Babic wrote:
> On 07/13/2011 01:58 PM, Wolfgang Denk wrote:
> > Dear Stefano Babic,
> >
> > In message <1310557095-18522-1-git-send-email-sba...@denx.de> you wrote:
> >> Wrong name in boards.cfg for the efikamx board
> >> makes that some files of the
On Wednesday, July 13, 2011 02:29:03 PM Wolfgang Denk wrote:
> Dear Marek Vasut,
>
> In message <201107131424.07581.marek.va...@gmail.com> you wrote:
> > On Wednesday, July 13, 2011 01:38:15 PM Stefano Babic wrote:
> > > Wrong name in boards.cfg for the efikamx board
> > > makes that some files of
On 07/13/2011 01:58 PM, Wolfgang Denk wrote:
> Dear Stefano Babic,
>
> In message <1310557095-18522-1-git-send-email-sba...@denx.de> you wrote:
>> Wrong name in boards.cfg for the efikamx board
>> makes that some files of the mx51evk instead of
>> efikamx are used.
>>
>> Signed-off-by: Stefano Bab
Dear Marek Vasut,
In message <201107131424.07581.marek.va...@gmail.com> you wrote:
> On Wednesday, July 13, 2011 01:38:15 PM Stefano Babic wrote:
> > Wrong name in boards.cfg for the efikamx board
> > makes that some files of the mx51evk instead of
> > efikamx are used.
>
> Jana fixed this some t
On Wednesday, July 13, 2011 01:38:15 PM Stefano Babic wrote:
> Wrong name in boards.cfg for the efikamx board
> makes that some files of the mx51evk instead of
> efikamx are used.
Jana fixed this some time ago ... I have it in my tree and I send it recently
to
he ML ...
http://git.denx.de/?p=u
Dear Stefano Babic,
In message <1310557095-18522-1-git-send-email-sba...@denx.de> you wrote:
> Wrong name in boards.cfg for the efikamx board
> makes that some files of the mx51evk instead of
> efikamx are used.
>
> Signed-off-by: Stefano Babic
> CC: Marek Vasut
> ---
> boards.cfg
In message <20110713105743.0c2c116f1...@gemini.denx.de> Wolfgang Denk wrote:
>
> > In my preloader some exception vector were setted to print message. So
> > it seems uboot.bin had some illegal asm code in it.
>
> Are you sure that your preloader analyses the binary image it loads
> and that it wo
Hi Helmut,
> On 07/12/2011 11:22 AM, Detlev Zundel wrote:
>
>> > i did go through the level of detail and showed the call graphs ...
>> > none of
>> > which should allow a driver tested as working to even once hit the
>> > NULL path.
>>
>> As I said, these are the call graphs currently existing..
Wrong name in boards.cfg for the efikamx board
makes that some files of the mx51evk instead of
efikamx are used.
Signed-off-by: Stefano Babic
CC: Marek Vasut
---
boards.cfg|2 +-
include/configs/efikamx.h |2 ++
2 files changed, 3 insertions(+), 1 deletions(-)
diff --gi
On 07/06/2011 12:28 PM, Matthias Weisser wrote:
> zmx25 is a board based on imx25 SoC, 64 Megs of LPDDR, 32 Megs of NOR flash,
> an
> optional NAND flash.
>
> Signed-off-by: Matthias Weisser
Applied to u-boot-imx, thanks
Best regards,
Stefano Babic
--
On 07/06/2011 12:28 PM, Matthias Weisser wrote:
> Adding support for mxc_gpio driver for imx25 and fix names of registers in
> tx25
> board.
>
> Signed-off-by: Matthias Weisser
> ---
Applied to u-boot-imx, thanks
Best regards,
Stefano Babic
--
On 07/06/2011 12:28 PM, Matthias Weisser wrote:
> Offsets to registers may be needed in asm code. This patch adds automated
> generation of these offsets form C structures.
>
> Signed-off-by: Matthias Weisser
> ---
Applied to u-boot-imx, thanks
Best regards,
Stefano Babic
--
=
On 07/06/2011 12:28 PM, Matthias Weisser wrote:
> Adding support for USB host on imx25 using the internal PHY. Changing the name
> of base address define for imx31 to get some unification.
>
> Signed-off-by: Matthias Weisser
Applied to u-boot-imx, thanks
Best regards,
Stefano Babic
--
===
Hi Mike,
[...]
> not really. i consider this to be "garbage-in garbage-out". imo,
> u-boot isnt a C library that should be padded with garbage checking
> all over. the result only helps broken systems (edge cases) while
> hindering the rest.
>
> i wouldnt have a problem with adopting an NDEBUG
On 07/06/2011 12:28 PM, Matthias Weisser wrote:
> imx25 used the wrong reset.c from imx27
>
> Signed-off-by: Matthias Weisser
Appplied to u-boot-imx, thanks
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH,
On 07/06/2011 12:28 PM, Matthias Weisser wrote:
> Need this function for autoboot keyd
>
> Signed-off-by: Matthias Weisser
> ---
> arch/arm/cpu/arm926ejs/mx25/timer.c | 12
> 1 files changed, 12 insertions(+), 0 deletions(-)
>
Appplied to u-boot-imx, thanks
Best regards,
Stefan
Hi Anton,
[...]
> The only problem with this is that there is one piece of missing
> information, which is how do you get the value of the field that is
> masked as if it were a 4-bit or 3-bit number. That is, if I want the
> IPS_DIV value, I probably want:
>
> (value & SCFR1_IPS_DIV_MASK) >>
Hi,
I am using a MPC8572 costume board. I am using U-boot as the boot loader. I
accidently made the bootdelay to 0 and I have the valid kernel , rootfs in
flash. The bootargs is "root=/dev/ram rw console=ttyS0,115200".
So I am not able to stop booting the board at the u-boot prompt. Can you
Hi Gururaja,
>
> For our upcoming SOC, we have a situation where in we need to
> configure UART console at runtime. Our SOC makes use of NS16550.
>
> I looked through the u-boot tree & found several references for doing the
> same.
>
> hebbar@linux- server:~/projects/u-boot-git$ gr NS16550_init *
Dear zzs,
In message <20110713104600.ga17...@greatfirst.com> you wrote:
>
> > >-F- Undef detected
> >
> > Is this the exact error message? And it gets printed by U-Boot?
> > Problem is, I cannot find any such text in mainline U-Boot.
>
> The message is printed after uboot.bin downloaded
Dear Simon Guinot,
In message <20110713103646.gb16...@kw.sim.vm.gnt> you wrote:
>
> Wolfgang, this patches are needed and there is no point to drop them
> down like this. Could you please explain how to get them mainlined ?
Sorry, but this is not at the top of my priority list at the moment.
Be
In message <20110713084043.1725516f1...@gemini.denx.de> Wolfgang Denk wrote:
> > I'am using a board similar to at91rm9200ek, u-boot version is v2011.03.
>
> Is your code in mainline? Which board configuration si this?
my code not in mainline, but I test it using the code for at91rm9200ek
> > Earl
On Fri, Jul 08, 2011 at 04:40:37PM -0400, Mike Frysinger wrote:
> On Friday, July 08, 2011 04:54:09 Simon Guinot wrote:
> > On Thu, Jun 30, 2011 at 11:35:55AM -0400, Mike Frysinger wrote:
> > > On Wed, Jun 29, 2011 at 17:16, Wolfgang Denk wrote:
> > > > Mike Frysinger wrote:
> > > >> The following
On Tuesday, January 04, 2011 09:27:39 AM Jason Liu wrote:
> This patch add I2C support for Freescale MX53 processor
>
> Signed-off-by: Jason Liu
>
-- SNIP --
>
> +#if defined(CONFIG_MX31)
> + freq = mx31_get_ipg_clk();
> /* start the required I2C clock */
> __REG(CCM_CGR0) = __R
Rewrite the mxc_i2c driver.
* This version is much closer to Linux implementation.
* Fixes IPG_PERCLK being incorrectly used as clock source
* Fixes behaviour of the driver on iMX51
* Clean up coding style a bit ;-)
Signed-off-by: Marek Vasut
---
drivers/i2c/mxc_i2c.c | 391
Dear Anton Staaf,
On 6 July 2011 13:51, Jaehoon Chung wrote:
> Tested-by : Jaehoon Chung
>
> Anton Staaf wrote:
>> I don't actually have an S5P machine to test this patch with. I wrote this
>> code while fixing an issue with the in progress Tegra MMC device driver that
>> is based on the S5P dr
Dear Dirk Behme,
On 12 July 2011 16:20, Chander Kashyap wrote:
> On 12 July 2011 00:19, Dirk Behme wrote:
>> From: Dirk Behme
>>
>> Fix compilation of mkv310_image host tool
>>
>> tools/mkv310_image.c: In function 'main':
>> tools/mkv310_image.c:67: error: 'S_IRUSR' undeclared (first use in thi
Dear zzs,
In message <20110713061040.ga5...@greatfirst.com> you wrote:
>
> I'am using a board similar to at91rm9200ek, u-boot version is v2011.03.
Is your code in mainline? Which board configuration si this?
[Otherwise: see http://article.gmane.org/gmane.linux.kernel.embedded/3534 ]
> Early I
80 matches
Mail list logo
