Hi Albert, please pull from u-boot-imx.
The following changes since commit 79642098a8345e2506ab0ff02e8c7ac4da405d0c: Add support for Network Space v2 and parents (2011-07-04 10:55:28 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master Fabio Estevam (2): mx31pdk: cosmetic: Fix line over 80 characters mx27: Make the UART port number explicit Jana Rapava (2): EfikaMX: Use correct imximage.cfg EfikaMX: Add missing CONFIG_SYS_TEXT_BASE Marek Vasut (1): EfikaMX: Enable EXT2 booting Matthias Weisser (7): build: Add targets for auto gen of asm-offsets.h and use it in imx35 imx: Add get_tbclk() function for imx25 imx: Use correct imx25 reset.c imx: Add support for USB EHCI on imx25 imx: Add auto generation of asm-offsets.h for imx25 imx: Make imx25 compatible to mxc_gpio driver and fix in tx25 imx: Add support for zmx25 board Stefano Babic (2): MX5: Update to autogenerated asm-offsets.h MX27: Update to autogenerated asm-offsets.h Torsten Koschorrek (1): ARM: Update maintainer of board scb9328 MAINTAINERS | 7 +- arch/arm/cpu/arm1136/mx35/Makefile | 11 -- arch/arm/cpu/arm926ejs/mx25/Makefile | 8 +- arch/arm/cpu/arm926ejs/mx25/asm-offsets.c | 60 ++++++++ arch/arm/cpu/arm926ejs/mx25/timer.c | 12 ++ arch/arm/cpu/arm926ejs/mx27/Makefile | 2 + arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 45 ++++++ arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +- arch/arm/cpu/armv7/mx5/Makefile | 2 + arch/arm/cpu/armv7/mx5/asm-offsets.c | 76 ++++++++++ arch/arm/include/asm/arch-mx25/imx-regs.h | 49 ++++++- arch/arm/include/asm/arch-mx25/macro.h | 64 ++++++++ arch/arm/include/asm/arch-mx27/asm-offsets.h | 16 -- arch/arm/include/asm/arch-mx27/imx-regs.h | 2 +- arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +- arch/arm/include/asm/arch-mx5/asm-offsets.h | 55 ------- arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++ board/karo/tx25/tx25.c | 26 ++-- board/logicpd/imx27lite/imx27lite.c | 2 +- board/syteco/zmx25/Makefile | 51 +++++++ board/syteco/zmx25/lowlevel_init.S | 110 ++++++++++++++ board/syteco/zmx25/zmx25.c | 203 ++++++++++++++++++++++++++ boards.cfg | 3 +- drivers/usb/host/ehci-mxc.c | 33 +++- include/configs/efikamx.h | 3 + include/configs/mx31pdk.h | 6 +- include/configs/zmx25.h | 180 +++++++++++++++++++++++ include/mxc_gpio.h | 5 + rules.mk | 10 ++ 29 files changed, 944 insertions(+), 119 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/mx25/asm-offsets.c create mode 100644 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c create mode 100644 arch/arm/cpu/armv7/mx5/asm-offsets.c create mode 100644 arch/arm/include/asm/arch-mx25/macro.h delete mode 100644 arch/arm/include/asm/arch-mx27/asm-offsets.h delete mode 100644 arch/arm/include/asm/arch-mx5/asm-offsets.h create mode 100644 board/syteco/zmx25/Makefile create mode 100644 board/syteco/zmx25/lowlevel_init.S create mode 100644 board/syteco/zmx25/zmx25.c create mode 100644 include/configs/zmx25.h Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot