-users mailing list
>> >> sr-users@lists.sip-router.org
>> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>> >
>> >
>> >
>> > ___
>> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-user
and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses
> and other defects.
>
>
>
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
&g
-tp151639p151995.html
> Sent from the Users mailing list archive at Nabble.com.
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/li
an get the INVITE processed without this issue?
>
> Regards,
> Owais
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
Hi Rodrigo,
There should be done logging before those lines. Could you please enable
debug and send the log file
On 11 Aug 2016 2:52 AM, "Rodrigo Moreira"
wrote:
> Hello Carsten Bock,
>
> I got to advance in the event REGISTER, but now face the following
> problem:
>
> When I type the command:
t; OK in my opinion.
>
> Best Regards,
> Kristian
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
*Jason
-bin/mailman/listinfo/sr-users
>
>
> --
> Federico Favaro
> R&D Department
> Athonet s.r.lfederico.fav...@athonet.com
>
>
> _______
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.
64-linux-gnu/libm.so.6 (0x7fefa349f000)
>
> /lib64/ld-linux-x86-64.so.2 (0x55f20aace000)
>
>
> and this is the mpath set in kamailio.cfg
>
> mpath="/usr/local/lib64/kamailio/modules/"
>
>
> Thanks
>
> On Thu, Jun 30, 2016 at 12:45
list
>>> sr-users@lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> ___
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>
Control process
> exited, code=exited status=1
> Jun 29 17:08:20 kamailio1 systemd[1]: Failed to start Kamailio SIP Server.
> -- Subject: Unit kamailio.service has failed
>
> Thanks
>
> _______
> SIP Express Router (SER) and Kamailio (Op
enstag, 07. Juni 2016 um 16:48 Uhr
> *Von:* "Christoph Valentin"
> *An:* "Jason Penton"
> *Cc:* "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List"
> *Betreff:* Re: [SR-Users] S-CSCF (kamailio) crashes after dere
@Christoph,
please use master - I have just committed a patch. Daniel, could you please
backport? is there a howto on how to backport a commit to previous versions?
Cheers
Jason
On Thu, Jun 2, 2016 at 4:11 PM, Jason Penton
wrote:
> Yes, agreed,
>
> should not crash ;) - I see the bug
activate in later step)
> >2) deactivated presence DB (want to activate in a later step)
> >
> > Thanks for help,
> > Christoph
> >
> > Gesendet: Dienstag, 31. Mai 2016 um 08:25 Uhr
> > Von: "Jason Penton"
> > An: "SIP Router - Kamailio (
ly one fits to kamailio.pid, but I
> did two backtraces.
>
> Two suspects:
>1) deactivated the dispatchers (want to activate in later step)
>2) deactivated presence DB (want to activate in a later step)
>
> Thanks for help,
> Christoph
>
> *Gesendet:* Dienstag, 31. Mai
Will look into this for you later today. Any chance of a gdb backtrace in
the meantime?
On 31 May 2016 8:07 AM, "Christoph Valentin"
wrote:
> I'm experimentally using kamailio 4.4.0-12.1 as an S-CSCF, connected via
> Cx to an HSS and connected via Mw to a Zoiper Client.
>
> I installed following
p url.
>
> Can you reproduce it?
>
> Cheers,
> Daniel
>
> On 30/05/16 09:35, Jason Penton wrote:
>
> Hi,
>
> Has anyone experienced segfault using http_async_query from
> http_async_client module? Here is BT:
>
> #0 __GI_fgets_unlocked (buf=0x7fca2
Hi,
Has anyone experienced segfault using http_async_query from
http_async_client module? Here is BT:
#0 __GI_fgets_unlocked (buf=0x7fca23ffe660 "127.0.0.1", n=n@entry=1032,
fp=0x7fca23ffe660) at iofgets_u.c:53
53 iofgets_u.c: No such file or directory.
(gdb) bt
#0 __GI_fgets_unlocked (buf
dpeventprocessor.c:318]: free_cdp_cb_event():
>> about to free string from cdp CB event [proxy1.sw.example.com
>> ;2463925226;1]
>> 0(21693) ALERT: [main.c:739]: handle_sigs(): child process 21757
>> exited by a signal 11
>> 0(21693) ALERT: [main.c:742]: handle_sig
on,
>>
>> It is always better when code "guru" shares his opinion :)
>>
>> Cheers gents !
>>
>>
>>
>> On 04/23/2016 01:35 AM, Jason Penton wrote:
>>
>> Hi gents,
>>
>> we do not support the preliminary service information. S
Hi gents,
we do not support the preliminary service information. So for now you can
only call Rx_AAR when you have SDP in the replies. So for VoLTE
(preconditions), for example you can call on 183 SP whilst using plain SIP
you will have to call on the first reply you get that has SDP (either 183SP
We use svn to manage the cfgs. The prod instances regularly update svn.
On 02 Mar 2016 7:39 PM, "Alex Balashov" wrote:
> On 03/02/2016 12:38 PM, Daniel Tryba wrote:
>
> This problem has been solved by the many configuration management tools
>> readily available.
>>
>
> +1, from my vantage point.
Hi Kamailio users and Devs.
I am interested to know if any of you are using SST module with DIALOG
module and sharing the timeout avp between the two - expecting the call to
be torn down if no in-dialog requests are processed. If you are using it,
is it working as you expect?
To me it seems that
e some many years ago ...
>
> Cheers,
> Daniel
>
> On 10/02/16 16:56, Jason Penton wrote:
>
> Hi Kamailio users and Devs.
>
> I am interested to know if any of you are using SST module with DIALOG
> module and sharing the timeout avp between the two - expecting the call to
> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda -
> http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
ine [rtpengine.c:1622]: rtpp_test(): proxy responded with
> invalid response
>
> Any advise would be nice.
>
> Thank you
> Fred
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@l
eah.net/preview?mid=1tbiGA7gBFXMT8KYUQAAsv&part=4&sign=192300c0a2e4b6c09dc76eb140fe54a1&time=1451549902&uid=langsir%40yeah.net>
>>
>> ___
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>
Agreed
On 16 Dec 2015 10:36 AM, "Carsten Bock" wrote:
> Hi,
>
> I agree, if the dialog_ng module is only used with IMS deployments, it
> may be confusing that it's called dialog_ng (despite the original
> ideas/thoughts, Richard mentioned).
> I have no objections renaming it to ims_dialog; if we
------>PCSCF
>> REGISTER
>> [src ip:127.0.0.1:8008]
>> Contact:sip:user@127.0.0.1:8008
>>
>>
>> On Tue, Nov 24, 2015 at 5:41 PM, Jason Penton > > wrote:
>>
>>> Hi Prashant,
>>>
>>> Often the P-CSCF ha
> Daniel-Constantin Mierlahttp://twitter.com/#!/miconda -
> http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.com
> Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
>
>
> ___
What errors are you getting? Perhaps we can assist you. There is no pre
configured vm at the moment
On 17 Nov 2015 8:38 am, "krantikumara" wrote:
> Hi Carsten,
>
> I am very newbie to install OpenIMs and Kamailio. I am getting so many
> errors. Could you please share any VM image is available wit
ericht: Amtsgericht Hamburg, HRB 120189
> Geschäftsführer: Carsten Bock
> Ust-ID: DE279344284
>
> Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
> http://www.ng-voice.com/imprint/
>
> _______
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>
__
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
*Jason Penton**Senior Manager: Applications and Services**Smile
Communica
ts.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com
www.smilecoms.co
sers mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
--
*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.
_
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
*Jason Penton**Senior Manager: Applications and Services**Smile
Comm
-
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
> Kamailio World Conference, May 27-29, 2015
> Berlin, Germany - http://www.kamailioworld.com
>
>
> _______
> SIP Express Router (SER) and Kamailio (Op
Hi Shane,
Please make sure you create a new transaction using t_newtran() if
t_check_trans() fails. Dialog will not be tracked if there is no
transaction.
Cheers
Jason
On Sun, Feb 8, 2015 at 11:42 PM, Shane Harrison
wrote:
> Hi Jason,
>
>
>
> Appreciate the reply. Below is my log file for pr
Shane,
Just looking at your config I see you have already set the flag. Can you
perhaps send me a log file and I will take a look for you. This is exactly
how we, and others (ng voice) use it in our IMS setups so it should work
Cheers
Jason
On Thu, Feb 5, 2015 at 8:48 PM, Jason Penton
ne Harrison
> >
> >
> >
> >
> > ___
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> > sr-users@lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierl
Yeah, would be cool to see what compiler Charles is using.
Thanks Daniel
On 28 Aug 2014 22:25, "Daniel-Constantin Mierla" wrote:
> Hello,
>
> On 28/08/14 20:32, Jason Penton wrote:
>
> Hey Daniel,
>
> I am puzzled by how this could make any difference? Could y
nce Park, Birmingham B7 4BB.
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Const
delete this e-mail and any
> attachment and all copies and inform the sender. Thank you for
> understanding.
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.s
ilman/listinfo/sr-users
> >
>
>
>
> --
> Carsten Bock
> CEO (Geschäftsführer)
>
> ng-voice GmbH
> Schomburgstr. 80
> D-22767 Hamburg / Germany
>
> http://www.ng-voice.com
> mailto:cars...@ng-voice.com
>
> Office +49 40 34927219
> Fax +49 40
ing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-route
t; sip_msg* _m, udomain_t* _d) in ims_registrar_pcscf/service_routes.c. I will
> try to do other tests searching on which attribute the check fails.
> Meanwhile, if you don't mind, please tell me if the it is a known bug or
> no, so maybe i can fix it :)
>
> Andrea
>
>
> On
y inserted in the contact table of the scscf DB
>>> (alice in scscf and bob in scscf2)
>>>
>>> However, as you can see, i'm not able to make a call. But if i set
>>> db_mode to 0 (for ims_usrloc_pcscf) everything work fine. What am i
>>> missing? I
r that right now the "usrloc-registrar
>> engine" for both pcscf and scscf isn't able to manage db access. Has
>> someone already make some tests about that?
>>
>> Andrea
>>
>>
>>
>> On Fri, Apr 4, 2014 at 10:35 AM, Jason Penton > >
:13 AM, Andrea Meroni wrote:
>
>> Ok, thank you very much
>>
>>
>> On Fri, Apr 4, 2014 at 10:06 AM, Jason Penton > > wrote:
>>
>>> master, yes
>>>
>>> utils/kamctl/mysql/
>>>
>>>
>>> On Fri, Apr 4, 2014 at
master, yes
utils/kamctl/mysql/
On Fri, Apr 4, 2014 at 11:02 AM, Andrea Meroni wrote:
> Many many thanks ... Is it in examples/pcscf? In the master branch?
>
>
> On Fri, Apr 4, 2014 at 10:00 AM, Jason Penton
> wrote:
>
>> Hi Andrea,
>>
>> I ha
27;aor' in 'field list'
>>
>> What am i missing? Consider then when i created the DB i answer yes to
>> all the questions about creating additional tables ...
>>
>> Andrea
>>
>
>
> _______
>
t;
>
> On 03/07/2014 10:21 AM, Jason Penton wrote:
>
> Hey Daniel,
>
> Please check this commit. I think you are running before this was added?
>
> commit 1d6b1d8765d7a6d21c291d2076a3a80a1710c11c
> Author: Jason Penton
> Date: Fri Feb 14 09:57:45 2014 +0
Hey Daniel,
Please check this commit. I think you are running before this was added?
commit 1d6b1d8765d7a6d21c291d2076a3a80a1710c11c
Author: Jason Penton
Date: Fri Feb 14 09:57:45 2014 +0200
lib/ims:modules/ims_charging,ims_icscf,ims_qos,ims_registrar_scscf:
fixed pkg_mem leak
figs + /var/log/messages) privately .. but generally
> speaking config is almost identical with configs from samples directory for
> p-cscf.
>
> Dan
>
>
>
> On 03/03/2014 04:02 PM, Jason Penton wrote:
>
> Hi Daniel,
>
> no we have not seen that... Can you provide d
you are not an
> intended recipient then please promptly delete this e-mail and any
> attachment and all copies and inform the sender. Thank you for
> understanding.
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-use
0x7fff61e98118) at main.c:2533
> cfg_stream = 0x1970010
> c = -1
> r = 0
> tmp = 0x7fff61e98148 "\211\236\351a\377\177"
> tmp_len = 0
> port = 5
> proto = 0
> options = 0x5de800
> ":f:cm:M:dVIh
macy based on marketing material.
>>
>> Is there possibly some truly technical-based comparison? I tried to look
>> it up in the archive but did not find some.
>>
>> Melanie
>>
>>
>> _______
>> SIP Express Router (SER) and Kamailio
Haproxy also very powerful for this
---
This mail was sent using my phone and may be brief, to the point, or
contain typos
---
On 21 Feb 2014 19:29, "Peter Dunkley"
wrote:
> No that is not currently possible. Kamailio is not an HTTP load-balancer.
>
> If you want a WebSocket load-balancer I sug
run.
>
>
>
> Any configuration we are missing. Anyone can help?
>
>
>
> Regards,
>
> Shankar
>
>
>
> *From:* Shankar [mailto:shankar...@plintron.com]
> *Sent:* Tuesday, January 21, 2014 3:09 PM
> *To:* 'Jason Penton'; 'SIP Router - Kamai
A-RD-W167A last message repeated 5 times
>
>
>
> Any configuration changes can help here?
>
>
>
> Regards,
>
> Shankar
>
>
>
> *From:* Shankar [mailto:shankar...@plintron.com]
> *Sent:* Wednesday, January 15, 2014 1:26 PM
> *To:* 'Jason Penton'
Great! Thanks Jose!
I will ask Daniel to back-port. Daniel, when you get a chance can you
back-port please? ;)
Cheers
Jason
On Thu, Jan 16, 2014 at 4:46 PM, José Seabra wrote:
> Hi Jason,
>
> I tested your patch and it is working well.
>
> Thank you
>
> Regards
>
&g
Hi Jose,
I've just pushed a patch to master. Please can you test and get back to me.
Cheers
Jason
On Thu, Jan 16, 2014 at 12:39 PM, Jason Penton
wrote:
> Ok, that makes sense. I have made a patch. I am just going to do some
> tests to confirm all is okay and then will push to mast
using async sleep function, within my failure route.
>
> Regards
>
>
>
> 2014/1/16 Jason Penton
>
>> Hi Jose,
>>
>> Are you using any async functions in your config file? Or is this just
>> standard failure route handling?
>>
>> Cheers
on"
>>>
>>>
>>> Thanks for your help
>>>
>>> --
>>> Regards
>>> José Seabra
>>>
>>
>> --
>> Daniel-Constantin Mierla - http://www.asipto.com
>> http://twitter.com/#!/miconda - http://www.linkedin.com/in
which forwards the sip message to another sip
> node.
>
> >
>
> >
>
> >
>
> > In the step (6) above, we see t_newtran() allocates one more time
>
> > shared memory for the same transaction.
>
> >
>
> >
>
> >
>
> > We
syslog for this run.
>
>
>
> Regards,
>
> Shankar
>
>
>
>
>
> _______
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/
ailio ready to be used as an IMS core?
>
> Thanks in advance. Best regards,
>
> Bruno C.
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-route
Apologies for this guys. This was our mistake. Thanks Daniel for resolving.
We will test the async replies in master today.
---
This mail was sent using my phone and may be brief, to the point, or
contain typos
---
On 24 Oct 2013 08:17, "Daniel-Constantin Mierla" wrote:
> Hello,
>
> can you give
Sorry, I meant to ask Olle if you have published the doc we shared with you?
On Tue, Apr 23, 2013 at 6:20 PM, Jason Penton wrote:
> Thanks Carsten.
>
> We have also started some other docs with Richard and Olle. Olle have you
> managed to publish the doc Rich and I shared with yo
ntivirus.
>
> ** **
>
> http://www.eset.sk
>
>
> __ Informacia od ESET NOD32 Antivirus, verzia databazy 8255
> (20130422) __
>
> Tuto spravu preveril ESET NOD32 Antivirus.
>
> http://www.eset.sk
>
>
> Contact field contains my local IP address. How can I still receive
> incoming call ?
>
>
> On Mon, Apr 1, 2013 at 8:10 PM, Jason Penton
> wrote:
>
>> 2
>>
>> --
>> This email has been sent using my phone. It may be brief, to the point or
>> con
2
--
This email has been sent using my phone. It may be brief, to the point or
contain typos.
--
On 1 Apr 2013 14:57, "Khoa Pham" wrote:
> Hi, when client send REGISTER message to Kamalio. Kamailio will save that
> client's IP to database.
> But what is this IP ? Is is 1,2 or 3 ?
> 1. The IP fro
By the way, the best clients we have found for IMS are imsdroid (for
Android) and Boghe (for windows). These are all based off of the doubango
multiplatform core. www.doubango.org.
Cheers
Jason
On Fri, Mar 22, 2013 at 9:19 AM, Jason Penton wrote:
> Perfect,
>
> Thanks Trey, I have a
e Users mailing list archive at Nabble.com.
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
--
Jason Penton
Senior Manager: Applications and Se
okay the problem here has to do with your config file:
your config should rather look something like this:
route[register]
{
if (!t_newtran()) {#absorb retransmissions
sl_reply("500","Could not create transaction");
exit;
}
if (!ims_www_
Hey,
I have just sent a mail to your colleague (Trey) i think ;)
I have just asked for a pcap of your registration. I suspect there are no
auth vectors being returned in your MAA from HSS but I would like to
confirm. We can fix from there.
p.s. sorry we missed this post in the users list. Wo
sed, but would it
> be a good idea to make the default bigger?
>
> -- juha
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/ma
Sorry my last reply was from my phone and a little brief.
see here -
http://kamailio.org/docs/modules/devel/modules/async.html#id2544960
you can use async_sleep in your case.
Cheers
Jason
On Mon, Oct 15, 2012 at 7:20 PM, Jason Penton wrote:
> Use the new async module.
> On Oct 15, 201
Use the new async module.
On Oct 15, 2012 3:49 PM, "pars3c" wrote:
> Hi,
>
> how can i delay sending of a message ?
>
> ** **
>
> A > proxy (after x seconds) ---> B
>
> If I use the sleep function of the cfgutils module,I block all the calls
> for the sleep time or the single on
How about a capture of the message? log file from Kamailio? You are not
going to get much help with such a little information
On Wed, Sep 26, 2012 at 8:36 AM, Cong Le Kha wrote:
> Dear Kamailio
>
> ** **
>
> I have got a problem as you with Audiocode
>
> ** **
>
> SIP/ SECurity/ MGmt/
on
non-sun hardware you will need to pay Oracle ;(
cheers
Jason
On Wed, Aug 29, 2012 at 7:46 AM, Daniel-Constantin Mierla wrote:
>
> On 8/28/12 6:09 PM, Jason Penton wrote:
>
> No. We use solaris11.
>
>
> IIRC, solaris 11 was free for evaluation purposes, has that ch
No. We use solaris11. But yes on any hardware
On Aug 28, 2012 5:56 PM, "Daniel-Constantin Mierla"
wrote:
> Hello,
>
> On 8/28/12 10:33 AM, Jason Penton wrote:
>
> Hey Daniel,
>
> We use Solaris virtualisation and it works great. The zones (VMs per se)
> are l
ingli...@pernau.at> wrote:
> Jason, are you using Solaris only as host or also as guest OS?
>
> regards
> Klaus
>
>
> On 28.08.2012 10:33, Jason Penton wrote:
>
>> Hey Daniel,
>>
>> We use Solaris virtualisation and it works great. The zones (VM
Hey Daniel,
We use Solaris virtualisation and it works great. The zones (VMs per se)
are lightweight, easy to administer and rock solid.
btw, common misconceptions are that you need sun (oracle) hardware and that
the os is not free. These are both false.
cheers
Jason
On Tue, Aug 28, 2012 at 9:5
rs...
>
> git clone --depth 1 git://git.sip-router.org/sip-router kamailio
> checkout carstenbock/ims
>
> Great work folks!!
>
> BR, Apoorv
>
> On Thu, Jul 19, 2012 at 11:44 PM, Jason Penton > wrote:
>
>> Hi Apoorv,
>>
>> We, along with Carsten and so
Hi Apoorv,
We, along with Carsten and some other guys are working on IMS extensions
for Kamailio. Right now the code sits in a staging area while we test and
improve before re-integrating it into Kamailio master. You can find the
extensions here:
http://code.google.com/p/smile-ims-extensions/
Pl
ok cool
On Thu, Jul 19, 2012 at 9:15 AM, Daniel-Constantin Mierla wrote:
> Hello,
>
> please keep the mailing list cc-ed, private emails from mailing list
> discussions will be ignored.
>
> On 7/19/12 8:28 AM, Durmuş Ali Öztürk wrote:
>
> Hi Daniel,
>
> Thank you for your advise. I have found
from the logs he has sent the mem addresses all look 64 bit. Sparc AFAIK is
only 64 bit anyway
Cheers
Jason
On Tue, Jun 12, 2012 at 8:50 AM, Daniel-Constantin Mierla wrote:
> Hello,
>
> is it 64bit architecture?
>
> Cheers,
> Daniel
>
>
> On 6/11/12 9:12 PM, Akan wrote:
>
>> Here is the informa
Hey Daniel,
If you want me to have a look at the solaris problem, let me know. Where
are the details for the problem?
Cheers
Jason
On Mon, Jun 11, 2012 at 9:01 AM, Daniel-Constantin Mierla wrote:
> Hello,
>
> I am going to create the GIT branch 3.3 in short time -- this branch will
> be used f
This seems like a really strange bug, what compiler are you using, gcc or
sun studio? We use gcc and don't have any issues like this. I will use sun
studio if you confirm that you are using it and will give that a go.
Cheers
Jason
On Mon, Jun 4, 2012 at 8:57 AM, Daniel-Constantin Mierla
wrote:
>
I think you mean Bria?? ;)
On Fri, Jun 1, 2012 at 10:06 AM, Alex Balashov wrote:
> This is wildly off-topic for the list.
>
> That said, I recommend Brian.
>
> --
> This message was painstakingly thumbed out on my mobile, so apologies for
> brevity and errors.
>
> Alex Balashov - Principal
> Evar
sorry that's the android version, iphone version is called idoubs -
http://code.google.com/p/idoubs/
On Fri, Jun 1, 2012 at 10:04 AM, Jason Penton wrote:
> Also check imsdroid for iphone. It works as std SIP too.
>
>
> On Fri, Jun 1, 2012 at 9:36 AM, Daniel-Constanti
Also check imsdroid for iphone. It works as std SIP too.
On Fri, Jun 1, 2012 at 9:36 AM, Daniel-Constantin Mierla
wrote:
> Hello,
>
>
> On 6/1/12 9:06 AM, Vijay Thakur wrote:
>
>> Dear All,
>>
>> Kindly suggest me the compatible client for iphone and Mac OS Leopard.
>> I have found that Jisti is
Actually, sorry I misread your capture - it is using the same address so
doubt it the problem of interfaces..
Are you are not getting any logging in debug when the ACK comes in?
On Thu, May 10, 2012 at 9:08 AM, Jason Penton wrote:
> Hey Mino,
>
> From your packet captures above
t;
> On Wed, May 9, 2012 at 4:41 PM, Jason Penton
> wrote:
>
>> Seems like a loose routing issue. Are you loose routing in your config
>> file?
>>
>>
>> On Wed, May 9, 2012 at 4:34 PM, Stoyan Mihaylov <
>> stoyan.v.mihay...@gmail.com> wrote:
&
Seems like a loose routing issue. Are you loose routing in your config file?
On Wed, May 9, 2012 at 4:34 PM, Stoyan Mihaylov wrote:
> You can use something like wireshark on Kamailio server to see if ACK
> packets go in right direction.
> I had problem with ACK and BYE, and I saw that in some ca
I can second Daniel's suggestion to rather use xmlrpc. A while back we
tested both versions and xmlrpc performance (and stability) was way better.
Cheers
Jason
On Fri, Feb 17, 2012 at 10:17 AM, Daniel-Constantin Mierla <
mico...@gmail.com> wrote:
> Hello,
>
>
> On 2/17/12 7:23 AM, Nathaniel L Ke
I am not familiar with Centos but I suspect there is another script being
run from somewhere. What I would do is move the /etc/init.d/kamailio script
somewhere safe (your home directory for eg). Then reboot and see if
kamailio still starts - if it does you need to find out whihc script is
being cal
Hi Sammy,
When you use the init script, it is starting Kamailio with the correct
arguments to get the environment you wish (-m 2048 probably). If however,
you just call kamailio these args are not there. Im not sure why you are
running with kamailio command directly. Why don't you add your init sc
Hi Austin,
Have a look at the TM module docs. You will find the appropriate commands
there.
HTH
On Nov 3, 2011 3:01 AM, "Austin Einter" wrote:
> Dear Andrew, Henning
> Thanks for sharing very useful information.
> I am bit new to kamailio, probably askingvery easy questions, please bear
> with
Hey,
U can use these docs in the meantime -
http://kamailio.org/docs/modules/stable/modules_k/dialog.html
Cheers
Jason
On Fri, Oct 28, 2011 at 11:36 AM, Timo Reimann wrote:
> Hey,
>
>
> Am 28.10.2011 um 07:29 schrieb Austin Einter:
> > I did change kamailio.cfg as below and getting some error.
1 - 100 of 111 matches
Mail list logo
