Shane,
Just looking at your config I see you have already set the flag. Can you
perhaps send me a log file and I will take a look for you. This is exactly
how we, and others (ng voice) use it in our IMS setups so it should work....
Cheers
Jason
On Thu, Feb 5, 2015 at 8:48 PM, Jason Penton <jason.pen...@smilecoms.com>
wrote:
> Hi Shane,
>
> dialog_ng started as a prototype by us quite a while ago to form the basis
> of dialogs in our IMS implementation using Kamailio. We took quite a lot
> from the existing dialog module at the time and then built the additional
> functionality on top. There were some things (like dlg_manage) that we did
> not move across.... and this is bad.... so I apologise.
>
> Right now to get a dialog recorded you need to define a flag in the
> modparam:
> modparam("dialog_ng", "dlg_flag", 10)
>
> And then when you want to track a dlg do something like:
>
> if (is_method("INVITE")) {
> setflag(10);
> ...
> }
>
> We have had a lot of other work to focus on and haven't spent too much
> time on dialog_ng but we will certainly put some effort into making it
> easier to use and more complete.
>
> Cheers
> Jason
>
> On Thu, Feb 5, 2015 at 8:03 PM, Shane Harrison <shane.harri...@imgtec.com>
> wrote:
>
>>
>> Thanks Daniel - that clarity helps. Apologies if I should have been able
>> to glean that from the docs - I just didn't see it in my reading. FYI,
>> dialog-ng has deprecated the dlg_mange() function.
>>
>> Can anybody who has used or involved in writing the dialog-ng module shed
>> some light on what the new mechanism is for creating an early dialog
>> structure?
>>
>> Cheers and thanks
>> Shane
>>
>> ________________________________________
>> From: sr-users [sr-users-boun...@lists.sip-router.org] on behalf of
>> Daniel-Constantin Mierla [mico...@gmail.com]
>> Sent: 06 February 2015 00:02
>> To: Kamailio (SER) - Users Mailing List
>> Subject: Re: [SR-Users] Using dialog_ng
>>
>> Hello,
>>
>> I haven't used the dialog_ng module, but (as expected based on the
>> dialog module) if you only set the FLT_DIALOG flag, then the dialog is
>> created when calling t_relay(). The dialog module has dlg_manage()
>> function which creates the dialog immediately, maybe that's in dialog_ng
>> as well.
>>
>> Cheers,
>> Daniel
>>
>> On 04/02/15 05:28, Shane Harrison wrote:
>> > Hi all,
>> >
>> > I think the lack of response to my previous thread is probably because
>> it was too complicated. I have now narrowed my problem down after further
>> archive readings .
>> >
>> > I am trying to use the dialog_ng module along with the
>> ims_charging_module. Upon reception of an INVITE, a call to the Ro_CCR()
>> from the request_route script is made. That function does a check that the
>> dialog record exists (binds to dialog module and does a "get_dlg(msg)"
>> call) - this fails i.e. dialog is not found.
>> >
>> > Running kamailio 4.2.2 and relevant sections of kamailio.cfg are:
>> > modparam("dialog_ng", "dlg_flag", FLT_DIALOG)
>> > modparam("dialog_ng", "timeout_avp", "$avp(DLG_TIMEOUT_AVP)")
>> > modparam("dialog_ng", "detect_spirals", 1)
>> > modparam("dialog_ng", "profiles_no_value", "orig ; term")
>> >
>> > request_route {
>> > # NAT detection
>> > route(NATDETECT);
>> >
>> > # Set DLG flag to track dialogs using dialog2
>> > if (!is_method("REGISTER|SUBSCRIBE"))
>> > setflag(FLT_DIALOG);
>> >
>> > # handle requests within SIP dialogs
>> > route(WITHINDLG);
>> >
>> > ### only initial requests (no To tag)
>> >
>> > # CANCEL processing
>> > if (is_method("CANCEL"))
>> > {
>> > if (t_check_trans())
>> > t_relay();
>> > exit;
>> > }
>> >
>> > t_check_trans();
>> >
>> > if (is_method("INVITE"))
>> > {
>> > set_dlg_profile("orig");
>> > Ro_CCR("CHARGING_CCR_REPLY", "orig", "SCUR", "",
>> "30","CCR_location");
>> > }
>> >
>> >
>> > So my question is, "should the above logic create a dialog record on
>> the initial INVITE?" and if yes then "what possible reasons might there be
>> for the Ro_CCR() function not be able to detect it exists?"
>> >
>> > Cheers
>> > Shane Harrison
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> > sr-users@lists.sip-router.org
>> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>> --
>> Daniel-Constantin Mierla
>> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>> Kamailio World Conference, May 27-29, 2015
>> Berlin, Germany - http://www.kamailioworld.com
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
>
>
> --
>
> *Jason Penton**Senior Manager: Applications and Services**Smile
> Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
> jason.barry.pentonjason.pen...@smilecoms.com <name.surn...@smilecoms.com>
> www.smilecoms.com
>
>
>
--
*Jason Penton**Senior Manager: Applications and Services**Smile
Communications Pty (Ltd)**Mobile:*+27 (0) 83 283 7000*Skype:*
jason.barry.pentonjason.pen...@smilecoms.com <name.surn...@smilecoms.com>
www.smilecoms.com
--
This email is subject to the disclaimer of Smile Communications at
http://www.smilecoms.com/home/email-disclaimer/
<http://www.smilecoms.com/disclaimer>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
