[sane-devel] Visioneer 4800 USB scanner

ner. Which is correct? I have a feeling that it's the website as despite the light being on, if I try to get a preview, nothing happens (other than an error). TTFN Paul --=20 "It is often said that something cannot be libel if it is the truth. This has had to be amended to 'someth

[sane-devel] Writing a backend (Visioneer 4800)

a backend for it? TTFN Paul --=20 "It is often said that something cannot be libel if it is the truth. This has had to be amended to 'something cannot be libel if it is the truth or if the bank balance says otherwise'" - US Today --=-r1thsS9qDMhQIDgT6/Re Content-Type: a

[sane-devel] Canon IX-4015

Has anyone any experience getting the old Canon IX-4015 to work with sane? I've searched for a while for some answers on the net but to no avail. Any info is appreciated. -Paul

[sane-devel] SANE_Handle question

w I could use the kscan library, but I'd rather not (for a couple of reasons). www.scribus.net TTFN Paul --=20 Homer: Donut?=20 Lisa: No, thanks. Do you have any fruit?=20 Homer: This has purple stuff inside. Purple is a fruit. --=-ZDp8vv5vFSIyEv7Xlepw Content-Type: application/pgp-signature;

[sane-devel] SANE_Handle question

v/sg0' will not work, because Sane does not=20 > know in this case, which backend should be used; 'mustek:/dev/sg0' might=20 > work.=20 I'll give it a spin and see what happens. Thanks for the tips. I have no doubt I'll be back to ask for more... TTFN Paul --=20 Ho

[sane-devel] Calculating maxlen

ne or is it found from sane_get_parameters (SANE_Params *params->size)? TTFN Paul --=20 Homer: Donut?=20 Lisa: No, thanks. Do you have any fruit?=20 Homer: This has purple stuff inside. Purple is a fruit. --=-EyBgZc7L2eK+2KbXNi9a Content-Type: application/pgp-signature; name=signature.asc

[sane-devel] Calculating maxlen

ks like I multiply bytes_per_line * pixels_per_line * lines * depth to accomodate everything. I'm currently toying with the code so I know what has to be done when it comes to implementing the code for real. TTFN Paul --=20 Homer: Donut?=20 Lisa: No, thanks. Do you have any fruit?=20 Homer: This

[sane-devel] sanei_usb.c

e number for each device attached. Thanks for listening - I hope to have some patches (and probably some more questions!!) soonish :) Cheers, Paul.

[sane-devel] sanei_usb.c

Hi Gerald, On 28/6/2005, "Gerald Murray" wrote: >Quoting Paul Smedley : >> One query I have though is about devname >>=20 >> I see in sanei_usb.h that the libusb format for this is libusb:busno:devno >>=20 >> Is this defined for all devices or jus

[sane-devel] sanei_usb.c

2. I have a usb scanner, which is supported through Tame (http://www.os2world.com/goran/tame.htm) which includes a special build of sane that works with usb on os/2 with the epson & snapscan backends, however the person working on that seems to have vanished, so I'm trying to bring things up to date. Cheers, Paul.

[sane-devel] sanei_usb.c

Hi All, On 3/7/2005, "Henning Meier-Geinitz" wrote: >Hi, > >On Tue, Jun 28, 2005 at 10:24:36PM +0930, Paul Smedley wrote: >> OS/2 doesn't have libusb, but has a library usbcalls that provides >> similar functionality, albeit most of the calls use different sy

[sane-devel] Problem with plustek & SANE_FIX on OS/2

y other scanners... Anyone have any ideas on likely causes? Cheers, Paul.

[sane-devel] patch for OS/2 USB Support in sanei_usb.c

calls.. This shouldn't break anything on other platforms This isn't perfect yet, but works on quite a few usb scanners - see http://smedley.info/sane.html for details. Cheers, Paul. -- next part -- --- sanei_usb-cvs.c Sat Apr 16 06:18:24 2005 +++ sane

[sane-devel] patch for OS/2 USB Support in sanei_usb.c

Hi! Henning Meier-Geinitz wrote: > Hi, > > On Mon, Jul 18, 2005 at 08:50:16PM +0930, Paul Smedley wrote: >> I know this may be too late for 1.0.16 - but thought I'd submit it anyway. > > Thanks. I'll commit your code after the release. I hope the next release w

[sane-devel] Hangs after scan completes with Plustek backend on OS/2

same directory as scanimage is run from. Cheers, Paul.

[sane-devel] ENABLE_LOCKING

anged such that ENABLE_LOCKING is not set on os/2.. I could also workaround this by patching sanei_access.c with something like: #ifdef HAVE_OS2_H # undef ENABLE_LOCKING #endif /* HAVE_OS2_H */ Any thoughts on how to accomplish with configure? Cheers, Paul.

[sane-devel] Hangs after scan completes with Plustek backend on OS/2

Hi Gerhard Gerhard Jaeger wrote: > On Sunday 24 July 2005 13:19, Paul Smedley wrote: >> Hi All, >> Wondering if anyone has any ideas on what could be causing hangs after a >> scan completes with Plustek-backend USB scanners on OS/2. >> >> This is the only backen

[sane-devel] Hangs after scan completes with Plustek backend on OS/2

Hi All, Gerhard Jaeger wrote: > Hi Paul, > > On Sunday 24 July 2005 13:19, Paul Smedley wrote: >> Hi All, >> Wondering if anyone has any ideas on what could be causing hangs after a >> scan completes with Plustek-backend USB scanners on OS/2. >> >> Thi

[sane-devel] Epson Perfection 2400 Problems

failed: Error during device I/O Full log is at http://smedley.info/epson2400debugoutput.zip Any ideas appreciated. Cheers, Paul.

[sane-devel] Epson Perfection 2480 Problems

My bad - I meant Epson Perfection 2480 Karl Heinz Kremer wrote: > The Perfection 2400 is supported by the EPSON backend and not the > SNAPSCAN backend. You are using the wrong configuration. > > On Aug 6, 2005, at 4:48 AM, Paul Smedley wrote: > >> Hi All, >> Wonderi

[sane-devel] patch for OS/2 USB Support in sanei_usb.c

Hi! Henning Meier-Geinitz wrote: > Hi, > > On Tue, Jul 19, 2005 at 06:51:04PM +0930, Paul Smedley wrote: >> Updated patch, along with patch for configure.in attached: > > Your code is in CVS now. Thanks - some small changes in attached patch. Cheers, Paul. ---

[sane-devel] ENABLE_LOCKING

Hi Gerhard Gerhard Jaeger wrote: > On Monday 25 July 2005 02:49, Paul Smedley wrote: >> Hi all, >> >> On OS/2 - enable_locking gets enabled by configure, however as far as I >> can tell, this is only used in sanei_access.c, and then, only by the >> plustek backe

[sane-devel] Anon cvs problems

selected via `cvs -R'. Cheers, Paul.

[sane-devel] Plustek hangs on OS/2 - part II

rarer, sometimes scanimage -L doesn't beep at all, nor does it hang - a log of this condition is at http://smedley.info/lide20debugoutput-scan-good.txt Anyone have any clues at all? Cheers, Paul.

[sane-devel] Plustek hangs on OS/2 - part II

e calibration file is set... Hope this helps it make more sense :) Paul Smedley wrote: > Hi All, > Wonder if anyone has any ideas on the semi-random LiDE20 hangs on OS/2. > > Most of the time - if I run scanimage -L it hangs scanimage.exe. When > it runs - I get a single beep

[sane-devel] Re: Plustek hangs on OS/2 - part II

r. > > What does the beep mean? On Linux scanimage -L neither beeps, nor > it hangs. I have no idea what the beep means.. I was hoping something in the plustek backend issued a beep and you'd know what it means :P > On Tuesday 09 August 2005 10:06, Paul Smedley wrote: >>

[sane-devel] Plustek hangs on OS/2 - part II

Hi Gerhard, Gerhard Jaeger wrote: > Hi Paul, > > On Tuesday 09 August 2005 12:27, Paul Smedley wrote: >> Oh & I forgot to mention - in the logs that 'beep' there's a return code >> (32772) from usbbulkread that says 'less data than requested return

[sane-devel] configure.in patch for OS/2

Last patch hopefully to get OS/2 USB support working out of the box... Cheers, Paul. -- next part -- --- configure.inFri Aug 19 20:23:42 2005 +++ configure.in.modFri Aug 19 20:23:08 2005 @@ -135,14 +135,11 @@ ]) AC_CHECK_HEADER(usbcalls.h

[sane-devel] Curious about status of Lexmark X75 Linux Driver

I'm wondering if anyone in the linux community has made any efforts in the Lexmark X75 driver. I've found out that Lexmark does provide a developers kit but I've been told it uses binary libraries which Sane cannot include. http://www.lexmark.com/US/products/info/linux/download.html I am new to t

[sane-devel] Re: Build system changes -- please test!

be built and > >installed on your system (especially OpenBSD and MacOS X). > > still builds on OS/2 :-) Also confirmed here as still OK on OS/2 :) -- Cheers, Paul.

[sane-devel] Scanning multipage documents with an ADF

Torfinn Ingolfsen wrote: > Hi, > > On Tue, Mar 30, 2010 at 2:20 PM, Sigurd Stordal > wrote: > > Why not use the gscan2pdf tool, it's created for exactly this kind of > thing, google it or search the mail archive for it. > > > Here it is: http://gscan2

[sane-devel] Kodak ESP all in one scan data format?

I would like to write a backend for this range of all in one printers. (I have Kodak ESP 5250) I have made some progress with the protocol and can aquire a scan. But It's not obvious how the data in the scan is organised. Does anyone recognise it? The protocol has 8 byte commands, for example a s

[sane-devel] anyone working on Lexmark X2330 support?

Hi all, [Please CC me in all replies] I've had a Lexmark X2330 sitting next to the family Windows box for a couple of years, figured it was time to make it work in Linux. Is anyone else working on Lexmark X2330 support? The protocol seems fairly simple at first glance, so it shouldn't be much w

[sane-devel] anyone working on Lexmark X2330 support?

?[Please CC me in all replies] On Sat, 2008-06-14 at 14:22 +0200, Gerard Klaver wrote: > Seems the Dell 810 has the same usb endpoints as the X2330 and other > Lexmarks. > > For some Dell 810 inside picture see http://gkall.hobby.nl/dell-810.html Interesting, thanks for the info. I'm not really

[sane-devel] anyone working on Lexmark X2330 support?

On Sat, 2008-06-14 at 15:42 +0200, Gerard Klaver wrote: > Let me know when you have something. Ok, the attached c file works with my scanner. I haven't tested it exhaustively yet, there are timing issues in general (grabbing the data too slowly or too quickly leads to badness and the need for res

[sane-devel] HP 8250 ADF

ng here unfortunately. I am using xsane under OpenSUSE 10.3. I haven't found a solution so far. Especially not being able to use duplex scanning is very annoying. Regards, Paul. -- View this message in context: http://www.nabble.com/HP-8250-ADF-tp20451949p20646098.html Sent from the SANE - Dev mailing list archive at Nabble.com.

[sane-devel] iscan and apt dependencies

't install or upgrade anything else because apt thinks iscan is broken, and keeps insisting on trying to remove it when it performs any other action. any ideas on how to work around this? paul =- paul fox, pgf at foxharp.boston.ma.us (arlington, ma, where it's 29.8 degrees)

[sane-devel] iscan and apt dependencies

at least > one package in the Ubuntu universe (multiverse?) that suffers from > the same problem. sigh. thanks for the explanation, even if it wasn't the one i wanted. :-) paul =- paul fox, pgf at foxharp.boston.ma.us (arlington, ma, where it's 22.3 degrees)

[sane-devel] Avision.c copyrights

e. The same > would be true for any other backends that you looked at or borrowed > from. "looked at"? i don't believe that's true. that implies there's some sort of unpublished trade secret in play. copyright applies to expression, not concept. paul =- paul fox, pgf at foxharp.boston.ma.us (arlington, ma, where it's 25.3 degrees)

[sane-devel] SANE protocol over USB as new USB scanner device class?

Hi all, [Please CC me in all replies] I've been thinking it would be cool if the SANE project didn't have to write new scanner drivers for each and every new USB scanner that comes out. The way to do this would be to define some USB protocol and have it standardised by the USB Implementers Forum

[sane-devel] SANE protocol over USB as new USB scanner device class?

[Please CC me in all replies] On Sun, 2008-12-28 at 10:23 +0100, Julien BLACHE wrote: > Paul Wise wrote: > > The way to do this would be to define some USB protocol and have it > > standardised by the USB Implementers Forum, then use that to influence > > the OEM sca

[sane-devel] SANE protocol over USB as new USB scanner device class?

On Sun, 2008-12-28 at 15:28 -0800, David Poole wrote: > > http://www.usb.org/developers/defined_class/#BaseClass06h > www.usb.org/developers/devclass_docs/usb_still_img10.pdf > Thanks. > When we were developing our scanners, we looked into the USB still > imaging device. The spec is huge and, I

[sane-devel] SANE protocol over USB as new USB scannerdevice class?

On Sun, 2008-12-28 at 16:20 -0800, David Poole wrote: > > Sounds like you would be the kind of manufacturer to publish > > protocol specs, do you plan to do that, or have you done so? > > Me, personally, I'd love to be able to do that. I've talked with my > managers and no go. As a previous pos

[sane-devel] scanimage OK, but problems with xsane

892): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated strace -f gives 25000 lines... nothing easily interpreted from me. What should I look for on the trace? Any hint is welcomed!Thanks, Paul PS Should I attach the strace file? -- n

[sane-devel] which OS for photo scanning with V500?

s made using sane vs. using windows software from epson? bear in mind that i'm not a practiced gimp user at all, so if the linux vs. windows results will be comparable, but easier for a scanning neophyte to attain under windows, i may go that route in any case... thanks, paul

[sane-devel] Lide35 shade of blue and painfully slow

Hi frieds, now I have installed ubuntu on my Pc. I use a Canon Lide35 scanner with xsane. But I have really problems: the result of a white page is blue. Correction with the pipette of the prescan is not the resolution. The next is that the scan with 300 ppi or higher is painfully slow (in comp

[sane-devel] Lide35 shade of blue and painfully slow

Hi friends, after the deletion of the home/.sane directory the speed is now ok, but the blue shade is already existing. hans-peter -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser

[sane-devel] informing the user they need to turn on the power?

Hi all, [Please CC me, I'm not subscribed] The scanner I'm working on (Lexmark X2330) shows up in USB when the scanner has wall power but the blue LED embedded in the power on button is off. When in that state, the scanner returns an specific error code indicating what I can only assume is "pleas

[sane-devel] unsubsrcibe

Hi, please unsubscribe me from the mailing list. Thanx hans-peter -- Preisknaller: GMX DSL Flatrate f?r nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02

[sane-devel] Scanning multipage documents with an ADF

to scan to (say) 99, and then scan a 15 page document, it creates a separate PDF document for every single page. What am i doing wrong? I'm using xsane version 0.996-2ubuntu1.1 on Ubuntu Linux 9.10 (karmic) 64-bit. Thanks in advance, Paul

[sane-devel] HP5590 problems

90] SANE backed for HP ScanJet 4500C/4570C/5500C/5550C/5590/7650 1.0.5 [hp5590] (c) Ilia Sotnikov [hp5590] sane_hp5590_get_devices, local only: 0 [hp5590] Found 0 devices scanimage: sane_start: Invalid argument [hp5590] sane_hp5590_exit Any ideas? Thanks in advance, Paul Schenkeveld

[sane-devel] Genius SF2600

looking at the afe parameters in /etc/sane.d/gt68xx.conf but trial and error did not make any difference. Can anyone help? Thanks! Paul Anderson

[sane-devel] Backend for Kodak Aio scanner, proposal

I have managed to deduce the protocol sufficiently to aquire uncompressed scan data from my Kodak ESP 5250 Aio. I have written a python program that aquires a scan over the wifi network interface. So I propose to try and write a SANE backend, unless someone already has? Any suggestions for a goo

[sane-devel] sane backend build system - help

I want to write a new backend. Currently the main obstacle is that I find the backend build system very intimidating. I have no experience of autoconf, automake, or libtool. On my system (ubuntu 10.10) I can run autoreconf and ./configure apparently OK, but when I run make I get these errors: li

[sane-devel] sane backend build system - help

autoreconf -i -f seems to have enabled me to make the backends. So now I am trying the approach of adding a new backend (copy of an existing one) to the backends to see if I can install that. Paul - Original Message - From: "Chris Bagwell" To: "Paul Newall" Cc:

[sane-devel] sane backend build system - help

files: emptybackend.c emptybackend.h emptybackend.conf with lots of comments in about what you should add in various places. - Original Message - From: "Paul Newall" To: Sent: Sunday, April 24, 2011 8:26 PM Subject: Re: [sane-devel] sane backend build system - help >

[sane-devel] Recent NM-1000

/var/lib/misc/usb.ids. Any thoughts on which sane driver and firmware file I should try? (I've tried a couple with no luck) Thanks, Paul I do not authorize any party to give away, publish or sell this e-mail address. Its use is only for correspondence with me. I also do not consent to receivin

[sane-devel] Recent NM-1000

Is "Couldn't set configuration: could not set config 1: Operation not permitted" as permissions issue or a configuration issue? (Or should I ignore it?) Thanks, Paul I do not authorize any party to give away, publish or sell this e-mail address. Its use is only for correspondence with

[sane-devel] Recent NM-1000

: stef Subject: Re: [sane-devel] Recent NM-1000 To: sane-devel at lists.alioth.debian.org Cc: "Paul Ericson" Received: Saturday, June 4, 2011, 2:58 AM Le jeudi 2 juin 2011 20:05:25 Paul Ericson, vous avez ?crit : > Removed all old sane and compiled and installed 1.0.22. > Tried a cou

[sane-devel] Fujitsu ScanSnap S1100

I am trying to test this scanner shown as supported through the epjitsu backend. http://www.sane-project.org/cgi-bin/driver.pl?manu=fujitsu&model=scansnap&bus=any&v=&p= However Xsane does not detect any scanning device attached however it does see the usb connection I am running Ubuntu 11.04 Usin

[sane-devel] Best way to release a development version of a new backend for testing?

that? Or should I be trying to get it added to sane backends as soon as possible? - I hesitate to do that because I guess it will need quite a bit of tidying up before it's really ready for that. Paul Newall -- next part -- An HTML attachment was scrubbed

[sane-devel] Version of net-snmp

in 5.6 ? Do many backends need 5.6 ? Am I likely to sucessfully detect an aio printer/scanner using 5.4.3 if I ignore the variable passed from configure? Thanks Paul

[sane-devel] Backend for Kodak ESP and Hero AIOs

. It seems unreliable when the data is large. Paul Newall

[sane-devel] Version of net-snmp

stall cups. Whereas Ubuntu for example has net-snmp 5.4.3 and not 5.6 This backend now works very nicely with network connection of the aio. But not so well with USB, since I have some problems with the bulk transfer failing Paul - Original Message - From: "Reinhold Kainhofer&q

[sane-devel] Implementing a raster driver for CMYKk inks

I have a filter that works OK with CMYK inks. But the printer (Kodak AiO) actualy also has grey (or light black) ink Can anyone tell me what I should do to use the grey ink? Or better still is there any existing backend that has CMYK and grey inks, that I could imitate? Paul Newall

[sane-devel] New backend kodakaio for kodak AiO devices - adding to sane-backends

s all the changes. Regards, Paul Newall -- next part -- A non-text attachment was scrubbed... Name: kodakaio-patch Type: application/octet-stream Size: 153022 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20120617/

[sane-devel] New backend kodakaio for kodak AiO devices - adding tosane-backends

I had a few suggestions for improvements. In a few days I will made a new version of the patch. Any other suggestions would be gratefully received. Regards, Paul Newall - Original Message - From: "Paul Newall" To: Sent: Sunday, June 17, 2012 12:10 AM Subject: [sane-devel] N

[sane-devel] New backend kodakaio for kodak AiO devices - adding tosane-backends

A new patch is attached. This patch should modify the current git to add kodakaio for the kodak ESP , ESP Cnnn, and Hero series of AiOs Regards, Paul Newall - Original Message - From: "Paul Newall" To: Sent: Sunday, June 17, 2012 9:21 PM Subject: Re: [sane-devel] N

[sane-devel] New backend kodakaio for kodak AiO devices - adding tosane-backends

h to emails to this mailing list? or would it be better to point people to a website where they can download it? Thank you for all the comments, Paul Newall - Original Message - From: "m. allan noah" To: "Paul Newall" Cc: Sent: Thursday, June 21, 2012 12:56 AM Su

[sane-devel] New backend kodakaio for kodak AiO devices - adding tosane-backends

ption. Since I based this backend on magicolor. Made a new patch, which is attached. This patch applies to the git version of 28 july 2012. Regards, Paul Newall - Original Message - From: "m. allan noah" To: "Paul Newall" Cc: Sent: Thursday, June 21, 2012 10:21 PM

[sane-devel] New backend kodakaio for kodak AiO devices -adding tosane-backends

Woops! This patch applies to the git version of 28 june 2012. (not july) - Original Message - From: "Paul Newall" To: "m. allan noah" Cc: Sent: Friday, June 29, 2012 6:44 PM Subject: Re: [sane-devel] New backend kodakaio for kodak AiO devices -adding tosane-ba

[sane-devel] Newbie questions

script, that adds a new backend to the build system with an arbitrary name. I think the best approach to distributing test versions is to distribute a complete version of sane. You still have to provide a lot of support to users on compiling and setting up sane. Regards, Paul - Original

[sane-devel] Replacement .desc file for kodakaio backend

I want to update the .desc file for the recently added backend kodaio. In order to add usbid entries. I guess that's an appropriate change now? as a documentation change. Do I go ahead and try to replace the file in the git version? Or is it better to post it here? Regards, Paul Newall

[sane-devel] Minor typo - release of sane-backends 1.0.23

ll in the process of releasing 1.0.23 ? Paul

[sane-devel] sane-backends 1.0.23 in ubuntu 12.10

n the set up of the "machine" that does the compiling, and not on the set up of the user's machine. Paul Newall

[sane-devel] (bugreport) sane-backends-1.0.23 compilation QA notice

the uri. I will work on it. Since it seems that more new devices are being made with their own network connection, it might be nice if one day some network scanner autodetect functions were added to sanei to avoid repeating the process in many backends. Paul - Original Message - From

[sane-devel] canoscan lide 700f - calibration howto

arget" and calibration software (lprof???). I have 2 questions? 1) am I going into good direction (all this seems to be too complicated), ie. do You calibrate Your scanners for scanning documents? 2) if calibration is nneded, how to do it in easier way? best regards, paul

[sane-devel] (bugreport) sane-backends-1.0.23 compilation QAnotice

I changed the kodakaio backend to use avahi instead of cups for network auto discovery. That meant changing backends/Makefile.am I'm not sure of the normal routine when Makefiles get changed. I did the following: git pull I edited some files including Makefile.am. autoreconf git add . git commit

[sane-devel] Paper size selection or detection using adf moving paper past fixed scan sensor

add white space until the required scan dimensions were met. But are there any more elegant solutions to this problem? For example is it possible for sane_read to return with something like END_PAGE_NOW_STATUS ? Then the front end makes the best use that it can of the data returned so far? Paul Newall

[sane-devel] Infrastructure: Rename sane-devel to sane-discuss

, it would be great if the Mailing lists Web page [1] could be restructured to have a short overview at the very top with the descriptions from the Alioth list overview page [2]. Thanks, Paul [1] http://www.sane-project.org/mailing-lists.html [2] https://alioth.debian.org/mail/?group_id=30186

[sane-devel] Handling of bug reports and patches

is to get patches in, should I bring the issues up to this list or should I just wait and leave them in the Alioth tracker? Thanks, Paul [1] https://alioth.debian.org/tracker/index.php?func=detail&aid=314016&group_id=30186&atid=410366 [2] http://lists.alioth.debian.org/pipermai

[sane-devel] Current project status

been improved) so that quality assurance can be done by machines, so that developers/contributors can focus their time on development. Did somebody offer such a service to the SANE project already? Or do I talk complete nonsense and everything is fine? Thanks, Paul [1] http

[sane-devel] Infrastructure: Rename sane-devel to sane-discuss

Dear Stef, thank you for your answer. Am Donnerstag, den 07.02.2013, 22:04 +0100 schrieb Stef: > On 07/02/2013 12:52, Paul Menzel wrote: > > I just subscribed to the list and I am sorry to start with that topic > > which has probably already been discussed. > > > &g

[sane-devel] Handling of bug reports and patches

Dear Stef, Am Donnerstag, den 07.02.2013, 22:42 +0100 schrieb Stef: > On 07/02/2013 12:59, Paul Menzel wrote: > > yesterday I created several new tickets and attached patches to some of > > them, like [1]. > > > > [#314016] Cppcheck: [backend/hp-device.c:351,

[sane-devel] My patches and issues in Alioth

;atid=410366&aid=314015&group_id=30186 (Input of knowledgeable developers appreciated. I am going to bring it up to the list otherwise.) https://alioth.debian.org/tracker/?func=detail&atid=410366&aid=314016&group_id=30186 Thanks, Paul -- next part -

[sane-devel] support for Canoscan LIDE 80 expected?

Thanks and sorry for not giving you better news, Paul [1] http://www.canon.de/Support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_80.aspx [2] http://www.sane-project.org/sane-backends.html [3] http://www.sane-project.org/unsupported/canon-lide-80.html [4] https://launchpad.net

[sane-devel] [plustek] follow-up for Epson Perfection 1250/Photo 64-bit issue

the tracker please always mention the bugs right away. G?erard means issue #314019 [2] in the Alioth bug tracker. > and got a comment by Paul Menzel > <https://alioth.debian.org/users/paulepanter-guest/>: > "I think the tracker is not used a lot anymore by the current developers. &g

[sane-devel] Git best practices for proper application of patches

not introduce regressions and to make it easy for sporadic developers to get an overview over latest developments. I hope I do not step on anyone toes, but in my opinion such things are *very* important for FLOSS projects or any software project! Thanks and sorry for another long post, Paul [1

[sane-devel] Git best practices for proper application of patches

Dear Stef, sorry for stepping on toes. I do not want to fight and want the SANE project to prosper! Am Montag, den 11.02.2013, 20:32 +0100 schrieb stef: > Le 11/02/2013 11:15, Paul Menzel a ?crit : [?] > if you are upset because attribution for the trailing whitespace > remov

[sane-devel] Git best practices for proper application of patches

good for Stef, you and myself. ;-)) Seeing that my intended help causes more harm than good, I am going to only find the cause of the Simple Scan crash my parents experience with the HP Photosmart 2610 and will not disturb you any longer. Good luck to you all and SANE. Thanks, Paul > [1] &

[sane-devel] [plustek] follow-up for Epson Perfection 1250/Photo 64-bit issue

s. Oh, last thing that comes to my mind. Does the problem depend also on the resolution? If you take a higher resolution, does the problem start to occur earlier or later? These are just guesses. So please do not have too high hopes. [?] Thanks, Paul > > [1] http://en.opensuse.or

[sane-devel] [PATCH] backend/plustek-usbscan.c: Fix typo nev*e*r in history

Date: Wed, 13 Feb 2013 12:12:08 +0100 The following commit commit b91010f24028e9d634fc93080d71a6727da01ce8 Author: Gerhard Jaeger Date: Wed Feb 13 10:31:22 2013 +0100 Cleanup, fix compilation warning conditions. introduced that typo, which is now fixed. --- Please apply t

[sane-devel] [PATCH] backend/plustek-usbdevs.c: Remove trailing whitespace

Date: Wed, 13 Feb 2013 12:17:09 +0100 The following commit introduced two trailing whitespace errors. commit 00167c20c53885c062c0e427b4141d1ac6994144 Author: Gerhard Jaeger Date: Wed Feb 13 10:32:28 2013 +0100 Added support for Q-Scan A6 - see bug report #312073 --- 1. Ple

[sane-devel] [PATCH] backend/plustek-usbhw.c: Replace 20013 by 2013 in copyright notice

Date: Wed, 13 Feb 2013 13:00:31 +0100 The following commit commit 00167c20c53885c062c0e427b4141d1ac6994144 Author: Gerhard Jaeger Date: Wed Feb 13 10:32:28 2013 +0100 Added support for Q-Scan A6 - see bug report #312073 updated the copyright years and introduced a typo. F

[sane-devel] [PATCH v2] backend/plustek-usbdevs.c: Remove trailing whitespace

Date: Wed, 13 Feb 2013 12:17:09 +0100 The following commit introduced two trailing whitespace errors. commit 00167c20c53885c062c0e427b4141d1ac6994144 Author: Gerhard Jaeger Date: Wed Feb 13 10:32:28 2013 +0100 Added support for Q-Scan A6 - see bug report #312073 --- v2: Re

[sane-devel] [plustek] follow-up for Epson Perfection 1250/Photo 64-bit issue

Bonjour Gerard, Am Dienstag, den 12.02.2013, 20:53 +0100 schrieb contact adbdr: > Gutenabend Gerhard und Paul, a small spelling mistake: it is ?Guten Abend?. ;-) > Some answers after Gerhard Jaeger's mail: > -It never occurs before the third scan, but sometimes only the fourth

[sane-devel] [PATCH v2] backend/plustek-usbdevs.c: Remove trailing whitespace

Dear Gerhard, Am Mittwoch, den 13.02.2013, 13:56 +0100 schrieb Gerhard J?ger: > On Wednesday 13 February 2013 13:25:41 Paul Menzel wrote: > > Date: Wed, 13 Feb 2013 12:17:09 +0100 > > > > The following commit introduced two trailing whitespace errors. > [...] > &

[sane-devel] [PATCH] hp.desc: Mark HP ScanJet 6100C as SCSI device type 3

Date: Wed, 13 Feb 2013 17:26:24 +0100 According to the blog post of jhansonxi [1] the HP ScanJet 6100C advertises itself as a processor device by using the value 3 for the SCSI Peripheral Device Type [2]. $ more /devices/pci:00/:00:1e.0/:01:01.0/host4/target4:0:5/4:0:5:0

[sane-devel] [PATCH v2] hp.desc: Mark HP ScanJet 6100C as SCSI device type 3

Date: Wed, 13 Feb 2013 17:26:24 +0100 According to the blog post of jhansonxi [1] the HP ScanJet 6100C advertises itself as a processor device by using the value 3 for the SCSI Peripheral Device Type [2]. $ more /devices/pci:00/:00:1e.0/:01:01.0/host4/target4:0:5/4:0:5:0

[sane-devel] [PATCH] epson{, 2}.desc/epkowa.desc: Mark Epson GT-5500 as SCSI device type 3

Date: Wed, 13 Feb 2013 18:41:54 +0100 In Alioth bug #313734 [1] Yann Cantin reported that the Epson GT-5500 advertises itself as a SCSI processor device [2]. Since it is not using the normal value 6 for scanner device [2], this has to be documented in the description file in the form :sc

  1   2   3   >