Re: [sane-devel] Epson V600 Photo - error message

ivers, the V600 > photo scanner works perfectly under the VueScan (not-free) software, BUT > under Linux-mint, the XSANE Scan program fails. Why? > > Best, > > George T. Diller > ---- > > On 04/05/2017 0

Re: [sane-devel] Epson V600 Photo - error message

The error message reports a failure to open the ICM profile of the scanner (profile, profil in French, is incorrectly translated as profit!) The original message (from xsane?) is something like > Error during CMS conversion: Could not open scanner ICM profile: If epkowa is not providing a colou

[sane-devel] troubles with driver to scanner fujitsu fi-7160

Hi, I have a scanner fujtisu fi-7160 and I'm trying to install in Ubuntu 14.04 32 and 64 bits using a SANE, but I didn´t get it. Do you have a solution? Thanks J. Claudio -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-dev

Re: [sane-devel] Getting "Error from scsi_read: End of file reached" from hp6200 again

anyway, Marshall On Fri, Jan 29, 2016 at 9:57 AM, Marshall Jose wrote: > I've been using a 6200-series scanner to scan piano rolls, which involves > the repetitious scanning of successive sections of the roll. This process > worked well for more than a year, but then gradually I got t

[sane-devel] Getting "Error from scsi_read: End of file reached" from hp6200 again

I've been using a 6200-series scanner to scan piano rolls, which involves the repetitious scanning of successive sections of the roll. This process worked well for more than a year, but then gradually I got the "Error from scsi_read: End of file reached" failure an increasing number of times during

[sane-devel] How get scanner commands on kds.log with a Kodak i1440 USB scanner

ve all the code to the backend level. Thanks Jose Osuna -Mensaje original- De: m. allan noah [mailto:kitno455 at gmail.com] Enviado el: Mi?rcoles, 22 de Octubre de 2008 05:16 p.m. Para: Jose Guadalupe Osuna Chavez CC: sane-devel at lists.alioth.debian.org Asunto: Re: [sane-devel]

[sane-devel] How get scanner commands on kds.log with a Kodak i1440 USB scanner

ET) = (TWRC_SUCCESS/TWCC_SUCCESS,0) ***Exit*** " Nothing like a GetConfig o GetWindow command or a wr_cwirebae module. ?Somebody knows another method? Thank you Jose Gpe Osuna Chavez

[sane-devel] backend Kodak i260 Image depth 48 bits stream. How is coded?

lt a label with aFrontCameraYCCOutput:1 and aFrontCameraYRGBOutput:0. YCC is a Kodak image format, isn't? Later I'll post an URL to a RAW image file scanned (without graphic format header). Thanks a lot. Jose Osuna This is the result of inquiry command

[sane-devel] backend Kodak i260 Image depth 48 bits stream. How is coded?

dows don't care what the image settings are; always scan to 48 bpp and might be converting the image to target afterwards. Thank you for you help, I'll post any result.. Jose Osuna P.S. This is the SetConfig settings on windows and I did emulate on Linux. wr_cwirebase

[sane-devel] backend Kodak i260 Image depth 48 bits stream. How is coded?

80 0a 0b 80 80 0b 0b 80 80 09 09 80 80 [kodak] 060: 0b 0a 80 80 09 08 80 80 09 09 80 80 0a 0b 80 80 .. Jose Osuna Coordinaci?n T?cnica CRDC Cd. Obregon Vangent de Mexico, S.A. de C.V. -- next part -- An HTML attachment was scrubbed... URL: http://list

[sane-devel] backend Kodak i260

0b 80 80 0b 0b 80 80 09 09 80 80 [kodak] 060: 0b 0a 80 80 09 08 80 80 09 09 80 80 0a 0b 80 80 .. Jose Osuna Coordinaci?n T?cnica CRDC Cd. Obregon Vangent de Mexico, S.A. de C.V. -- next part -- An HTML attachment was scrubbed... URL: http://lists.alioth.

[sane-devel] Piano roll scanning

I have some piano rolls (recently purchased for a trifling sum) which I thought might be scan-able with my 11x17 sized ADF scanner, given a little modification. The industrious lads at http://www.iammp.org have been scanning them using their own homemade imagers, but I thought a sane-and-scanne

[sane-devel] help with Scanner cannon N1240U USB

Hello, please help me Sane configure scanner, but scanner not response, please help, can i do ? sane version 0.991 version Lunux Ubuntu 7.04 feisty (Gnome and kde) Scanner Cannon N1240U Thanks at all

[sane-devel] help with Scanner cannon N1240U USB

Hello, please help me Sane configure scanner, but scanner not response, please help, can i do ? sane version 0.991 version Lunux Ubuntu 7.04 feisty (Gnome and kde) Scanner Cannon N1240U Thanks at all ---

[sane-avision] Re: [sane-devel] re: Minolta Dimage scan dual II

On Friday 09 June 2006 14:17, Rene Rebe wrote: > Hi, > > > > The device already contains some comments that it might be neded, look at > this: > > { "MINOLTA", "FS-V1", > 0x0638, 0x026a, > "Minolta", "Dimage Scan Dual II", > AV_FILMSCANNER}, /* maybe AV_ONE_CALIB_CMD */ >

[sane-devel] re: Minolta Dimage scan dual II

On Thursday 25 May 2006 09:03, Jose Paulo Moitinho de Almeida wrote: >... > > Using the version in the package (build 182) I had problems that seemed > very similar to your log, but with a (much) older version (build 99) I > could a scan without problems. From files that I foun

[sane-devel] Minolta dimage Scan Dual II format

On Thursday 25 May 2006 19:24, Dietmar Segbert wrote: > Hello Jose, > hello Rene, > > my next question is, how can i vonvert the scanned negativ to a positive? > My brother said, that the scanned negativ ist "egativ", so i must convert > it to an positiv. > >

[sane-devel] re: Minolta Dimage Scan Dual II

On Tuesday 23 May 2006 20:47, Dietmar Segbert wrote: > Hello Rene and Jose, > hello list, > > now i have tested the following commands: > > scanimage -d avision >test.pnm 2>error.asc > (door was closed an no film holder) > > scanimage -d avision --frame 1 --resol

[sane-devel] Canon MP450 and TWAIN

Hi! Regarding the Canon MP450, I've just red its .INF file. This file describes the family of the scanner as: "TWAIN Scanners". Can this fact facilitate the reverse engineering process? If so, how? Regards. __ Jose Juan Iglesias

[sane-devel] usbsnoop for colorpage slim 1200

Henning Meier-Geinitz wrote: >Hi, > >On Thu, Dec 29, 2005 at 03:15:33AM +0100, Juan Jose Pablos wrote: > > >>I managed to get a log for the usb transation for this scanner. I do not >> >> > >Which scanner exactly? The "Genius Colorpage Slim 1200&

[sane-devel] genesys backend

Henning Meier-Geinitz wrote: > You can also set SANE_DEBUG_SANEI_USB=255 to see why the command fails > exactly. > Here is the output: [sanei_usb] sanei_usb_open: trying to open device `libusb:004:004' [sanei_usb] sanei_usb_open: configuration nr: 0 [sanei_usb] sanei_usb_open: interface nr:

[sane-devel] genesys backend

Henning Meier-Geinitz wrote: > It won't work out of the box with the CVS code but you can try to get > it running by adding it's id to genesys.conf and to genesys_devices.c > (near the end, e.g. exchange the one of the LiDE 60). Most probably > it's necessary to adjust the respective canon_lide_*

[sane-devel] Genius: ColorPage-Slim 1200 USB2 support

This is what is needed for this scanner to be detected. It is a copy from the cannon scanner, and I would like to find out which values should requiered for this to work, please help! Cheers, cheche -- next part -- ? cpslim1200.diff Index: genesys.conf ===

[sane-devel] Genius: ColorPage-Slim 1200 USB2 support

Henning Meier-Geinitz wrote: > Your sane-find-scanner output clerly says that it's a Genesys GL841 > chipset. So the genesys backend should be used. > > ok, I did download the experimental genesys-new cvs code and modify genesys.conf && genesys_devices.c to fake this scanner with canon_lide_50

[sane-devel] Genius: ColorPage-Slim 1200 USB2 support

Hi guys, I had opened a bug about this scanner, and I had put all the information that I could find as you suggested on your documents: https://alioth.debian.org/tracker/index.php?func=detail&aid=302515&group_id=30186&atid=410366 now, I do not know how to continue. It looks like the chip is a

[sane-devel] BearPaw descriptions problems!!

Hi, I think that I have just found a problem in the gt68xx.desc : :model "BearPaw 1200 CU Plus" :interface "USB" :status :good :comment "Product id 0x021c" :model "BearPaw 1200 CU Plus" :interface "USB" :status :untested :comment "Procuct id 0x021b" The same scanner with differents idxproducts?

[sane-devel] using usb ids

El vie, 06-08-2004 a las 10:01, Erik P. Olsen escribió: > On Fri, 2004-08-06 at 09:38, jose wrote: > [snip] > > http://linuxhw.sf.net > > Not found. Wrong URL? > sorry, try this: http://sourceforge.net/projects/linuxhard > [snip] > > -- > Regards, > Erik P. Olsen >

[sane-devel] using usb ids

Hi guys! We are working in building a unified database hardware for linux components as you can see in our Sourceforge project: http://linuxhw.sf.net Our main targets are: 1. Make the hardware just work for the user. 2. Have as many details as possible about all the hardware users could want t

[sane-devel] umax.desc problem

Hi, I have making a data base of scanner using the info in the desc files and I have found this problem in umax.desc: :model "Jade" :interface "SCSI" :status :good :comment "OK, SCSI-ID=LinoHell Office" :model "Jade" :interface "SCSI" :status :good :comment "OK, SCSI-ID=LinoHell JADE" both scann

[sane-devel] sane-desc to xml (new patch)

--=-V9ECFqTA5PamXiz3OKtM Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi again, I have a new patch for the XML output of sane-desc: - Now the XML document have a XML root. - New tag for the document marked as "new". - Some bug fixed... I have being using the XML output for make a per

[sane-devel] sane-desc to xml (new patch)

--=-2Lh951dPA2P4JNpiqmF0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi again, I have a new patch for the XML output of sane-desc: - Now the XML document have a XML root. - New tag for the document marked as "new". - Some bug fixed... I have being using the XML output for make a per

[sane-devel] Which are the modules to load for a scsi scanner in the kernel 2.6

rything went ok, however, I tried loading the modules and I had the same error. Thanks Jose

[sane-devel] Which are the modules to load for a scsi scanner in the kernel 2.6

Hi, I recently migrated from SUSE 9.0 Kernel 2.4.20 to SUSE 9.1 Kernel 2.6.4. I want to install my scsi scanner but I don't find the modules that I used to load before (onscsi and ppscsi). Could someone tell me which modules I have to load now? thanks Jose

[sane-devel] a new function for sane-desc!

--=-iNgj46R6siZP/InxV0Si Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi, finally I have made a new function in sane-desc to get an xml output. I think that only have to send the patch, if there is any problem please email me, this is the first time that I make something similar.. B

[sane-devel] sane-desc to xml

Hi again, thanks for te information about sane-desc, very usefull tool. No Im thinking on add a new function to sane-desc to get a output in XML format (very easy to parser). I have the code done it but I need to know what should I do... I guess that I have to send the patch and then you say that

[sane-devel] Backends Database

Hello, Im a developer of the Linux Hardware Database Unification Project(http://sourceforge.net/projects/linuxhard/), a part of this Database will include information about scanners and backends. I would like to know if there is some DB about this or if all the information is included on the frame

[sane-devel] Help with usb AGFA 1212U an libusb

ccess, but it don't work well absolutely. I think that the problem is in th count of the urb read packets, and perhaps there is a better solution to make the number of packets even. I attach the patch. Thanks. Jose Alberto Reguero. --Boundary-00=_WwDdAZYOumXfd5e Content-Type: text/x-diff

[sane-devel] HP 7450C USB scanner failure with ADF

On Tuesday 24 June 2003 10:49, Jose Paulo Moitinho de Almeida wrote: > On Monday 23 June 2003 18:12, TomF wrote: >. > > Without the logs it is difficult to tell. But the current version of the > backend uses libusb, so (probably) the hpusbsci module is necessary for > that s

[sane-devel] HP 7450C USB scanner failure with ADF

On Monday 23 June 2003 18:12, TomF wrote: > On Redhat 9.0 with all Up2date patches installed, I uninstalled > sane-backends and installed sane-backends-1.0.12-1asp.i386.rpm. When I > ran xsane with ADF enabled, my HP7450C scanner, which is connected > via usb, fed about 5 inches of the first docum

[sane-devel] Microtek SlimScan C3, output always a black image

d I really appreciate your work. Sincerely, Jose Karsten Festag wrote: >Hi Jose, > >ok, I think I found and solved the problem. I put the changed code on my >homepage www.karstenfestag.gmxhome.de, it's the latest version. You will have >to remove the SUSE packages and compile SAN

[sane-devel] Microtek SlimScan C3, output always a black image

so I will continue and see what happends. Thanks Jose Karsten Festag wrote: >Hi Jose, > >ok, I think I found and solved the problem. I put the changed code on my >homepage www.karstenfestag.gmxhome.de, it's the latest version. You will have >to remove the SUSE packages

[sane-devel] Microtek SlimScan C3, output always a black image

e: scanimage: argument without option: `y20' However, I ran it again exactly as before and I was looking for that line and I don't find it. I attached the zip file with the scanned image, the new log file and the config file. I hope this will help in something, tell me what

[sane-devel] Microtek SlimScan C3, output always a black image

rrectly, I mean, it is cut and streched in some parts. I rescan the image several times until the image is acquire correclty. Do you have any idea how should I correct that error. Thanks Jose

[sane-devel] Microtek SlimScan C3, output always a black image

Hi Karsten, thanks for the answer. >Hi Jose, > >which frontend did you use ( xsane, scanimage, xscanimage, kooka...)? Did you >try another frontend and other modes (color, grayscale and lineart scans)? > I used xscanimage and xsane, and in the two of them I have teh same p

[sane-devel] Microtek SlimScan C3, output always a black image

ng, I tested the scanner in windows and it works fine. Thanks Jose

[sane-devel] Re: Affordable film scanner supported by SANE

On Wednesday 19 March 2003 00:32, Major A wrote: >... > > Then we would have to add focusing and exposure options to the SANE > standard as well-known options because they are vital for film > scanning. > I think this is a critical point to make things move. ZP

[sane-devel] Normal or destructive behaviour when SANE starts?

On Friday 14 March 2003 13:03, Alisdair wrote: > .. > > 1. The scanner spends about 15 seconds making rather worrying grinding > noises (the scan head does not move at this time); >

[sane-devel] avision: Out of memory (was: scanimage: sane_start: Out of memory)

On Tuesday 04 February 2003 08:50, Henning Meier-Geinitz wrote: > Hi, > ... > > > These are the current modules loaded: > > > > hp5300 16240 0 > > Looks like this one is the hpusbscsi module. Maybe an early version? I > don't think hpusbscsi was included in 2.4.10, so that's proba

[sane-devel] OT: Scanning 6cm x 6cm Dias

On Sunday 02 February 2003 14:54, Jonathan Buzzard wrote: > ... > What I question is given you have used the high end expensive > equipment to take the photographs, why you would then used a > cheap flat bed scanner to scan them in. It just does not make > any logical sense at all. > > If you can't

[sane-devel] Calibration curves for avision scanners

Hello, We are try to figure out what curves are appropriate for the calibration of the scanners that are supported by the sane avision backend, but, as no official information is available, we will do it by "guessing" what is done by the windows drivers. I have prepared a script that does the

[sane-devel] problem in sanei_scsi.c (and hpusbscsi)

On Friday 12 April 2002 00:36, you wrote: > Hi peoeple. > > I'm currently debugging a segmentation fault in the avision backend's > calibration code. > The hpusbscsi module changed recently (now it senses errors correctly :-) In the 2.4 series the change was in 2.4.19-pre5, but not in 2.419-pre4.

[sane-devel] umax astra 4500, 6700 -> Avision OEM scanners

On Wednesday 20 March 2002 18:20, you wrote: > Hi all. > > During the CeBIT I found out that the UMAX Astra 4500, 6700 are also > Avision OEM scanners. > > They do not have the firmware in an EPROM. The scanner-driver needs to > upload it into the scanner after each power-off. > > I hope that Avisi

[sane-devel] Film holder control (and adf)

On Monday 28 January 2002 09:43, Ulrich Deiters wrote: > "Film scanner" would be more accurate in my opinion, because these > devices usually can handle slides, negative strips, and spooled film. > > Is there a film scanner with automated frame selection? On the ones I > know you have to manually p

[sane-devel] Film holder control (and adf)

Hello, If I understand correctly the summary is: - use dev->sane.type = "film scanner"; - suggest to the frontends adding a button-type option "Query scan-information from scanner"; - the options allow the backend to recognise what the scanner can do; - prepare for sane2 a way to automatically i

[sane-devel] Film holder control (and adf)

On Thursday 24 January 2002 19:54, Henning Meier-Geinitz wrote: > Hi, > >. > > > > scanimage -frame 3 > > Does this mean "move to frame 3 and then scan an image" or just "move > to frame 3"? > As far as I understand it is "move to frame 3 and then scan an image" > .. > > Looks like all th

[sane-devel] Film holder control (and adf)

Hello I have been looking at the "best way" to control film holder movement. As far as I could tell in 1.0.6 no backend was supporting this (at least the coolscan and the canon fs didn't). Today I had a look at the coolscan2 project. It allows an option -frame as in: scanimage -frame 3 My pr

[sane-devel] Re: Avision backend

On Wednesday 16 January 2002 23:44, Rene Rebe wrote: > Hi all. > > I just merged our latest updates into the official sane CVS > repository, the feature freeze is next monday - and I had to update > some URLs anyway. > I have been busy lately but, from my viewpoint, the main problems (directly an

[sane-devel] Minolta Scan Elite II

On Wednesday 12 December 2001 13:11, Hubert Figuiere wrote: > Minolta just released or is about to do so the new Scan Elite II slide > scanner. It looks like a Scan Dual II with ICE, ROC, etc, and it offers > FireWire as well as USB. I was wondering if anyone got his hands on this > model and how i

[sane-devel] Plans for an updated avision backend (HP7400+HP5300+Minolta Scan Dual II+???)

On Wednesday 14 November 2001 14:05, Martin Jelínek wrote: > Martin Jelínek, Wed Nov 14, 2001 at 02:58: > > I attach a attach.c source with parsed output at debug level 3, raw bytes > > moved to debug level 5. > > > > mates > > It looks great! I will try it tonight. Now for the resolutions: Y

[sane-devel] Re: Avision backend

--Boundary-00=_DQGQTZJ0INPIVZH9VTX1 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Hello On Monday 12 November 2001 13:00, you wrote: > > > Attached is a slightly modified avision.c (simply replace the sane-1.0.6 > one). It doesn't yet do the so

[sane-devel] Plans for an updated avision backend (HP7400+HP5300+Minolta Scan Dual II+???)

On Monday 12 November 2001 08:58, Raymond Pau wrote: > Hi there, > > I have an InterScan 330p scanner (OEM Avision AV260C) and also the source > code for the window twain driver from Avision. > Most of the code is in Assembly. > > How do you intend to get started? > > Raymond Pau > r...@yahoo.com >

[sane-devel] Plans for an updated avision backend (HP7400+HP5300+Minolta Scan Dual II+???)

Hello Following my previous mail to the list I received some info, which may be "just what we want". Those interested in participating in the development/testing of the avision backend, so that it can use the scanners that are known to be manufactured by avision, but are not supported by the

[sane-devel] Minolta Scan Dual II (status report)

On Tuesday 06 November 2001 14:24, you wrote: >. > >From what I could find here, it appear that, according to the Linux USB > > scanner page that > the Minolta Scan Dual II use an Avision chipset and that the Avision > backend may be one pa

[sane-devel] HP 7400c

On Tuesday 06 November 2001 12:45, ma...@sirrah.troja.mff.cuni.cz wrote: > Ondrejov, 6.11.2001 > Hi all > > I would like to ask, whether there is any progress with the hp7400c (with > Avision chipset) to be supported by sane. > I mailed a similar question yesterday regarding the Minolta Scan Dual

[sane-devel] Minolta Scan Dual II (status report)

Hello Using the hpusbscsi driver by Oliver Neukum I managed to use this film scanner under linux using kernel 2.4.13 and vuescan 2.1. :-) It worked out of the box, the only problem being some gray cross lines ;-) For all that need imediate linux access this is probably the way to go. There may

[sane-devel] Problem with empty sense buffer in sanei_scsi (linux+hpusbscsi+vuescan)?

Hello I will try to summarize my last impressions regarding this: - vuescan is not using linked commands. But both Abel Deuring and Douglas Gilbert had the impression that it did when they looked at the logs. Could it be that there is a problem with a flag that is not properly transmited/proce

[sane-devel] Problem with empty sense buffer in sanei_scsi (linux+hpusbscsi+vuescan)?

On Monday 15 October 2001 02:37, Douglas Gilbert wrote: > Jose Paulo Moitinho de Almeida wrote: > > On Thursday 04 October 2001 21:01, abel deuring wrote: >.. > > > > masked_status 8 driver_status 0 > > Paulo, > The problem starts here, a masked_status of 8

[sane-devel] Problem with empty sense buffer in sanei_scsi (linux+hpusbscsi+vuescan)?

--Boundary-00=_LGDP714O5XTG771YA91A Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8bit On Thursday 04 October 2001 21:01, abel deuring wrote: > Jose Paulo Moitinho de Almeida wrote: > > Hello > > >. > > Jose, it

[sane-devel] Problem with empty sense buffer in sanei_scsi (linux+hpusbscsi+vuescan)?

Hello First the good news: I have managed to make my Minolta Scan Dual II work with vuescan under linux using the hpusbscsi driver in the ac series. The not so good news is that I had to introduce an hack in drivers/scsi/sg.c to achieve this. I think that the problem is related to sanei_scsi,

[sane-devel] HP Scanjet 5300C

On Thursday 20 September 2001 04:59, you wrote: > I have a FBSD 4.3 box with a HP 5300C USB scanner, I am using xsane .75 > with GIMP 1.2.1. I was looking at the documentation and saw that the > 5300C is supported and not supported. When I look at dmesg it says that > the scanner is found, but wh

[sane-devel] Re: Film scanners (was Re: Nikon Coolscan SCSI commands)

On Friday 20 July 2001 22:40, you wrote: > Jose Paulo Moitinho de Almeida wrote: > > The film type is printed of the edge of the negative. Yo can read it, but > > normally the holders on film scanners don't allow to scan it (was that > > the idea?) > > The question