sing a tool. It's
nice to have three choices where once there was only one.
Best Regards,
Brian Wiley
Wiley Electronics LLC
On 9/9/2010 7:00 PM, Skip Towne wrote:
I checked out this instrument when it came out a couple years ago. In
my opinion, there were two fatal flaws with it.
com>This e-mail address is being
protected from spambots. You need JavaScript enabled to view it .
Best Regards,
Brian Wiley
Wiley Electronics LLC
On 9/13/2010 2:50 PM, Marco Mangelsdorf wrote:
One point of clarification regarding SunPower Corp. and WEEBs having just
had communication wit
ground when you remove any module.
Best Regards,
Brian Wiley
Wiley Electronics LLC
845.247.6163
www.we-llc.com
On 9/14/2010 1:31 AM, Andrew Truitt wrote:
2 points:
1) For the sake of clarity: there are WEEB LUGS
<http://www.we-llc.com/Datasheets/204-0404-03.pdf> and WEEB CLIPS
Hi Mick,
WEEB lugs can use either solid or stranded. One wire up to 6 AWG or two
wires of 10AWG.
Best Regards,
Brian Wiley
Wiley Electronics LLC
On 1/14/2011 8:15 PM, Mick Abraham wrote:
Kindly bear with me as I go "back to basics". #10 cu has been my old
standby for bonding
Mr. Miller,
With regard to which frames will work with the Acme clips, I think you
should request the 2.5 frame and not the 2.0 frame.
http://www.solarworld-usa.com/system-designers/~/media/Global/PDFs/datasheets/sunmodule-solar-panel-245-poly-ds.pdf
--
Best Regards,
Brian Wiley
Wiley
ction.
Best Regards,
Brian Wiley
On 1/15/2013 2:11 PM, August Goers wrote:
Hi John,
I definitely see your point and that is why I was somewhat questioning the
use of WEEBs with Enphase below. Enphases's instructions (link posted in
thread below) seem to indicate a support of running the
consisting of multiple distributed inverters, you can do so with a
reversible connection, typically a listed lug, anywhere on the PV system.
Best Regards,
Brian Wiley
On 1/17/2013 10:58 AM, John Berdner wrote:
Jay:
You raise an interesting question.
I believe the structure would have to b
Hi Bob,
I have tried this experiment on Sharp 175s. I backfed them at their
rated current, but never got any heating effect. Not sure why it didn't
work.
Best Regards,
Brian Wiley
Wiley Electronics LLC
boB wrote:
I was discussing this off-line with Ron (Copied below). I cc'
plus thread forming screw does not.
Best Regards,
Brian Wiley
North Texas Renewable Energy Inc wrote:
6) I think John Wiles recommended the star
washer / bolt /
weather resistant lug combination as a solution in the absence of a
module manufacture's specific instruc
9 matches
Mail list logo
