I know this has been discussed before but I couldn’t find what I needed in
archives.
If I have a single XWpro with 600v controller and all i want to do is some
programing can I use the SCP?
I just remember there were things the SCP can’t so with the PRO, but I think
its in the stacking part a
Is this a new (not installed) or existing XW pro?
Dave Angelini Offgrid Solar
"we go where powerlines don't"
[1]https://offgridsolar1.com/ [2] [1]
e-mail offgridso...@sti.net
text 209 813 0060
On 2024-11-11 2:22 pm, jay via RE-wrenches wrote:
I know this has been discussed before but I co
Jay:
I just configured a new XW Pro with an old SCP.
William Miller
Miller Solar.com
805-438-5600
www.millersolar.com
On Mon, Nov 11, 2024 at 2:23 PM jay via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:
>
> I know this has been discussed before but I couldn’t find what I needed in
As long as you use the default grid config this is fine and as long as
you do not need the advanced modes for LFP. If you need to change to
IEEE , (offgrid) you need the gateway.
Dave Angelini Offgrid Solar
"we go where powerlines don't"
[2]https://offgridsolar1.com/ [3] [2]
e-mail of
Hi NickI remember I tried to start a radian with 60kwh and it wouldn’t work. Yes just 1 power module, but with just a bit of solar connected it started right up. Obviously a nighttime restart isn’t going to work. All the other inverters I’ve used haven’t had an issue so something unique to the desi
>
> Of course, I didn't have a long enough Cat5 cable with me, nor a Cat5
> splice connector. So I had to rig something, which I did successfully to
> jumper from #2 to #4. But when I turned everything back on, #4 still would
> not work. I eventually realized that you have to change the Modbus addr
Not my design. A roughly 4 yr old system. It’s connected to the grid for battery charging as needed. No sell back. Of course who ever installed it neglected to tell them to add water to the batteries. Or that 8 of the batteries you couldn’t actually add water to due to the 3” of access above them.
Friends:
I am repairing a site with NEP PVG RSD devices. We will be removing all of
the modules and finding out why the system is underperforming and why 2 of
the units are not reporting.
The quick start guide includes this line: PVG’s PV-lead pairs must be
connected to PV modules before co
8 matches
Mail list logo
