Friends:
I am repairing a site with NEP PVG RSD devices. We will be removing all of the modules and finding out why the system is underperforming and why 2 of the units are not reporting. The quick start guide includes this line: PVG’s PV-lead pairs must be connected to PV modules before connecting homerun cables between RSD device. I find this wording confusing. Homerun cables do not connect between RSD devices, home runs connect to the PV input on an inverter (Soul-Arc in this case). I wish to rail mount the PVG RSD devices, connect the series wiring between these modules and then connect the PV. Can I interconnect the PVG units prior to connecting the PV modules? This sure would make the process easier. Thanks in advance for in any input on working with these units. William Miller Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com CA Lic. 773985
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
