When the fogged over display window gets to the point where you can not see anything it can lead to the homeowner simply relying on the Green Led for operation verifying.A very common failure can go undetected if only the Green Led is used.No errors, solid Green Led but not pushing power!Home owner
ssage from your computer system. Thank you.
From: RE-wrenches on behalf of
frenergy
Sent: Saturday, May 12, 2018 10:25:21 AM
To: re-wrenches@lists.re-wrenches.org
Subject: Re: [RE-wrenches] SMA Sunny Boy Display Window
Is all the polishing done on the outside o
I now put HVAC foil tape over all windows to keep the sun off when I
install.
On Fri, May 11, 2018 at 4:00 PM, Ray wrote:
> I've also used some special 3M sanding pads that go up to 10,000 grit.
> They are used for polishing airplane wind shields. Enough elbow grease,
> you can get any result y
I've also used some special 3M sanding pads that go up to 10,000 grit.
They are used for polishing airplane wind shields. Enough elbow grease,
you can get any result you want.
Ray Walters
Remote Solar
303 505-8760
On 5/11/18 1:48 PM, Jerry Shafer wrote:
Wayne
We use automotive grade polishe
Wayne
We use automotive grade polisher after a run with 1200 then 1800 the 2400
wet sand paper, you must clean the surface before attempting to polish and
then you need a powered cotton wheel, that works for us
Jerry
On Fri, May 11, 2018, 4:48 AM Wayne Irwin
wrote:
> We have installed quite a fe
e environment before printing this email.
From: RE-wrenches On Behalf Of
Marco Mangelsdorf
Sent: Friday, May 11, 2018 10:33 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] SMA Sunny Boy Display Window
Toothpaste.
On Friday, May 11, 2018, Wayne Irwin mailto:pureenergyso...@hotmail.co
Toothpaste.
On Friday, May 11, 2018, Wayne Irwin wrote:
> We have installed quite a few SB's over the years and are seeing a growing
> number of fogged over display lenses.
>
> We've tried headlight polish with limited success.
>
> Other than purchasing a new lid from SMA does anyone have anothe
7 matches
Mail list logo