Hey I have an issue and I ran out of ideas.
I have two virtual servers, one running debian with compiled php and one
running server 2008 with php non thread safe version.
Both have 5.5.3 version installed and both have almoust the same config and
modules, with opcache enabled.
However I ran the b
, including pspell if the configure worked
properly.
Also double check that the configure line it shows at the top of the
page shows your configure line. If not the PHP MAMP is running isn't
the one you built.
paul
--
Paul Reinheimer
saved in plain text, but instead either RTF, or some other format with
extra stuff (which is what you're seeing with your web browser). Could
you try looking at the file in notepad or similar, and make sure when
you save it you've told it to save in "plain text" not "RTF" or "Rich
Text Format".
paul
Hi Eric,
Two basic questions, but as I'm the first to reply I'll give it a
shot. Is there anything in the php error log? Also, could you ensure
display startup errors is on?
Paul
--
Paul Reinheimer
Zend Certified Engineer
> After a restart it's impossible to reach the local server via Browser.
What does it say in the apache error log?
paul
--
Paul Reinheimer
Zend Certified Engineer
ons and ISAPI setup,
and folder permissions.
I have been recycling the application pools as well as net stop iisadmin and
net start w3svc.
--
Paul Barham
(816) 679-8010
Problem fixed.
recompiled php with ./configure --with-gd=/usr/local/
previously used --with-gd which I think is compiled with default gd in
php installation.
On Sat, Oct 3, 2009 at 4:54 PM, Paul Shi wrote:
> I have compiled PHP with GD with JPEG support, but it doesn't work.
> Us
I have compiled PHP with GD with JPEG support, but it doesn't work.
Using command "php -info" shows JPEG is successfully enabled in the GD
section, but phpinfo() under GD section doesn't show JPEG status. What could
be the possible cause to this problem?
I NEED HELP
I've been trying to install PHP to my Apache 1.3.22 server during the
past year without success. Does anyone have a working PHP 4 or 5 for my
Apache which has been running flawlessly for 6+ years. What I need is a
binary distribution of PHP 4/5 to work with my binary (w. DSO
Hi Jonathan,
Before compiling PHP at the command line run export CFLAGS=-O1, then
use your ./configure line.
You may wish to make clean before this.
paul
Good Morning,
One of the side effects of running --enable-debug is that it exports a
few CFLAGS, including -O1 or -O0 or the like. Do you
want to try setting that flag manually, then rebuilding PHP? See if
the same errors occur.
paul
or directory)
open("/usr/local/bin/php.ini", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/local/lib/php.ini", O_RDONLY) = 3
to tell you where it is eventually looking for the file. In my case,
as we can see on the last
line, it found it in "/usr/local/lib/php.ini"
paul
/php-5.2.5/php.ini-recommended
/usr/local/src/php-5.2.5/tmp-php.ini
Copy one to the aformentioned directory, rename it to php.ini,
edit it to your needs, and restart your webserver
best of luck
paul
ension=/usr/local/zo/4_3/ZendOptimizer.so
You're running PHP 5, but pased on the path, I might presume that Zend Optimizer
was built for an earlier version of PHP. Try disabling that extension,
or looking
for a more recent version on disk (/usr/local/zo/5_3/ZendOptimizer.so ?)
paul
--
Paul Reinheimer
a without any difference. The FAQ says to consult
"installation chapter" to added extra stuff to EXTRA_LIBS but that
chapter had nothing about it.
I was having not expecting to install PHP because I thought I already
had it.
Can someone help me out here ? What stuff should be in EX
implementaiton under IIS, follow the steps and see if there's something
that wasn't done. I think I used this same tutorial to get things set up on my
Windows box.
http://learn.iis.net/page.aspx/272/installing-php-on-windows-vista-with-fastcgi/
paul
--
Paul Reinheimer
I'm a total newbie to all this and I want to downgrade from PHP 5.2.4 to PHP
4.3.9. Does anyone know how to do this or if there are some tutorials out
there to show you how to do this.
Cheers
Paul
Hi
I would like to use Dreamweaver CS3 with my PHP and MySQL but have found it
will not work with this later version of PHP so I am informed on the forums
the easiest way to achieve this is to downgrade to Version PHP 4.3.9. But
how do I uninstall PHP?
All help appreciated.
Thanks
Paul
Hi
I would like to use Dreamweaver CS3 with my PHP and MySQL but have found it
will not work with this later version of PHP so I am informed on the forums
the easiest way to achieve this is to downgrade to Version PHP 4.3.9. But
how do I uninstall PHP?
All help appreciated.
Thanks
Paul
et it all over with in one swell foop"
is certainly a significant incentive.
~~~~
Paul Blondé
Web Programmer
enTel Communications Inc
<mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED]
250.633.5151
866.633.2644
-Original Message-
From: Jesse
nd Google chokes on even a quoted search for that.
Paul Blondé
Web Programmer
enTel Communications Inc
[EMAIL PROTECTED]
250.633.5151
866.633.2644
e to directly
view the source code in your include files.
(sorry for the double Jesse but I figured it would be better to reply to the
whole list rather than just to you)
Paul Blondé
Web Programmer
enTel Communications Inc
<mailto:[EMAIL PROTECTED]&
reads
"Apache 2.0.x on Microsoft Windows".
~~~~
Paul Blondé
Web Programmer
enTel Communications Inc
[EMAIL PROTECTED]
250.633.5151
866.633.2644
-Original Message-
From: RodgerW [mailto:[EMAIL PROTECTED]
Sent: Friday, August 10, 2007 2:33
Add the user INET_USER to the security permissions on all files you want to
be viewable from a browser, and give read and read+execute permissions to
the file.
Paul Blondé
Web Programmer
enTel Communications Inc
<mailto:[EMAIL PROTECTED]>
site (or should not be, since that would give anyone in the
world the rights to at least read your entire hard disk, and possibly run or
even, if the permissions allow it, write anything anywhere on your hard
disk).
Paul Blondé
-Original Message
Do note that only the .php extension is really necessary, unless you
specifically use the extensions .php4 and .php5 because you have both
versions of PHP installed, or have encoded scripts from a third party
(.phtml).
Paul Blondé
Web Programmer
enTel
an "I see you but I can't touch
you" situation.
Paul Blondé
-Original Message-
From: Keith Roberts [mailto:[EMAIL PROTECTED]
Sent: Friday, July 27, 2007 9:55 AM
To: php-install@lists.php.net
Subject: Re: [PHP-INSTALL] help wi
if
not all of the details here:
http://ca.php.net/manual/en/install.windows.php
~~~~
Paul Blondé
-Original Message-
From: Ralph Hulslander [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 24, 2007 12:41 PM
To: php-install@lists.php.net
Subject: [PHP-INSTALL]
*eyes crossing*
ok, you are getting into stuff that is way beyond me, but if you get it
working do let us know how you managed it.
Paul Blondé
-Original Message-
From: Tony Shadwick [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 24, 2007 2:03 PM
with
Apache+PHP that would respond to, for instance, includes from multiple other
servers to provide data from the database without having to run PHP and
MySQL on each web server, but you still have to have an httpd on the PHP
machine I think.
Paul Blondé
and php on seperate machines.
> I don't even know if you can connect to php remotely, say like MySQL on
> a specified port?
>
> Kind Regards
>
> Keith Roberts
>
> On Tue, 24 Jul 2007, Paul Blondé wrote:
>
>> To: php-install@lists.php.net
>> From:
wait...are you saying that you are hosting your PHP on one machine, and your
Apache on another?
Does Apache+PHP support remoting like that?
Paul Blondé
-Original Message-
From: Tony Shadwick [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 24, 2007
ni so try
this:
http://www.bblog.com/forum/viewtopic.php?t=2689
Paul Blondé
Web Programmer
enTel Communications Inc
[EMAIL PROTECTED]
250.633.5151
866.633.2644
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, Ju
TIA
~~~
Paul
Response
** This is an automated reply to your message to Email Abuse.
**
Your message has been delivered to our email abuse department. This
department handles complaints from users that are receiving unwanted email.
We try our best
Looks like a missing header file, or one that does not match the rest of the
package, at first glance.
-Original Message-
From: Randall Perry [mailto:[EMAIL PROTECTED]
Sent: Saturday, June 23, 2007 1:54 PM
To: php-install@lists.php.net
Subject: [PHP-INSTALL] Make fails when building wit
debug file:
debug.log
Description: Binary data
Thanks in advance for your help.
-- John-Paul Mead
[EMAIL PROTECTED]
-
From: Janet Valade [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 20, 2007 5:35 PM
To: Paul Blondé
Cc: php-install@lists.php.net
Subject: Re: [PHP-INSTALL] Trying to set up a test server on my localhost
Paul Blondé wrote:
> OK so I installed Apache2.2.4 and it worked fine, then I unpac
OK so I installed Apache2.2.4 and it worked fine, then I unpacked the Win32
executable (not MSI installer) to C:\PHP5 and put this in my httpd.conf:
LoadModule php5_module "c:/php5/php5apache2.dll"
and lower down:
AddType application/x-httpd-php .php
I've tried it without the quotes, I'
Take a look at mod_rewrite, you can use it to rewrite requests as they come
in and direct them
to a PHP script
paul
On 11/15/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
I'm trying to set up a server that will take every single request, no
matter what it looks like, and hand
olved.
Paul G. Brown ^.
.^
IBM/INFORMIX(oo)
___oink!
(408) 927-1463 Like the signature? Then buy the books!
http://www.amazon.com/exec/obidos/ASIN/1558604529
A quick check - is this a known problem?
I can compile and use php fine, but when I try to link libphp5.so
into the apache httpd process, it tells me there are some undefined
symbols. These functions (_emalloc also - see below) are implemented
in the PHP/Zend/zend_alloc.c, but aren't f
You want to add to what you had already.
2)
cut_string($row["comment"],"1/10"," Read More>>>");
should just be
cut_string($row["comment"],10,"
Read More>>>");
You're not using the 1 anywhere, and it can only confuse your for
loop. Now it's also an integer, not a string.
paul
report for? Am I likely to be able to provide enough
information for this to be looked at?
thanks again to all
paul
I do the grep
Rasmus suggested I invariably get
[EMAIL PROTECTED] php-5.1.2]# grep libxml2 config.log
configure:19773: checking libxml2 install dir
configure:88107: gcc -o conftest -I/usr/include -g -O2
-I/usr/local/include/libxml2 -I/usr/local//include
-I/usr/local/include -I/usr/src/php-5.1.
l -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto -lresolv -ldl -lz -lz -lxml2 -lz -lm -lxml2 -lz -lm 1>&5
Do I need to find a non-rpm copy of the -devel packages? Or somehow convince my system to upgrade it's RPMs?
paul
On 2/25/06, Rasmus Lerdorf <[EMAIL PROTECTED]> wrote:
any non .rpm -devel
packages so the install was attempted without one.
paul
(to put a face to a name, we met at PHP|Works, I sat across from you
at the speakers dinner)
On 2/25/06, Rasmus Lerdorf <[EMAIL PROTECTED]> wrote:
> Paul Reinheimer wrote:
> > Hi, I'm trying to compil
nable-dba=shared' '--with-db4'
'--disable-eapi' '--with-xsl' '--enable-memory-limit'
'--with-libxml-dir=/usr/local/lib/'
make ends with
collect2: ld returned 1 exit status
make: *** [sapi/cli/php] Error 1
anyone got any ideas, or hints on what information I should be giving
to make diagnosis easier/possible?
The full output of make is available here:
http://example.preinheimer.com/phpbuild.txt
thanks
paul
--
Paul Reinheimer
Did I ask this in the wrong list?
- Original Message -
From: "Paul Gardiner" <[EMAIL PROTECTED]>
To:
Sent: Monday, February 13, 2006 2:46 PM
Subject: [PHP-INSTALL] pear install fine, but pecl install not, on SuSE 10.0
Hi,
I want to install Fileinfo for use with h
:
PHP Api Version: 20020918
Zend Module Api No: 20020429
Zend Extension Api No: 20050606
ERROR: `phpize' failed
Anyone any idea how I can fix it, or even just get more info
about the error?
Cheers,
Paul.
A bit of background, originally, alt
At 04:09 PM 2/2/2006, Tim Burgan wrote:
I'm wondering if you can outline, or direct me to a resource that
explicitly notes the benefits of php5 over php4.
They've got everything you need at php.net:*
Appendix B. Migrating from PHP 4 to PHP 5
http://php.net/manual/en/migration5.php
* to para
You need to adjust the error reporting:
http://uk2.php.net/error_reporting
Try:
error_reporting(E_ALL ^ E_NOTICE);
Paul
On 7/10/05, freddy <[EMAIL PROTECTED]> wrote:
> Hi There everyone
>
> This is my first post here so please forgive me if i don't give all the
>
nable to load dynamic library '/usr/lib/php4/mysql.so'
- /usr/lib/mysql/libmysqlclient.so.10: symbol __fprintf_chk, version
GLIBC_2.3.4 not defined in file libc.so.6 with link time reference in
...
Anyone know a solution to this?
Thank you very much,
Paul
I am running:
./configure --with-imap=/usr/local/src/imap-2004a
--with-imap-ssl=/usr/bin/openssl --with-apache=/usr/include/apache-1.3/
--enable-modules --enable-mods-shared --enable-so
Thanks in advance for your help,
- Paul
-lxml2 -lm -lxml2
-lm -lcrypt -lxml2 -lm -lcrypt -o libphp5.la
/usr/bin/ld: cannot find -lltdl
collect2: ld returned 1 exit status
make: *** [libphp5.la] Error 1
What is happening here?
I would be really helpful of some help!
Thanks in advance.
Andrew
--- Andrew Lee Paul <[EMAIL PROTECTED]>
Hello All
I am trying to compile PHP 5.0.2 on a freshly
installed Fedora Core 3.
This is my PHP configure:
./configure \
--with-mysql=/usr/local/mysql \
--with-apxs=/usr/local/apache/bin/apxs \
--with-mcrypt=/usr/local/lib \
--enable-trans-sid \
--enable-t
hi
what im using is in the subject
but not been able to execute the php files
means publishing
when i adds the line
Loadmodule for php in apache conf file
the apache moniter says
requested operation failed
it tells me this just for module loading nothing else
someone please help
===
Just one problem. The traditional "Hello World," program that my book
starts off with includes a PHP function called, phpinfo()--prefaced by a
print command. It's supposed to print out a rather large amount of
information in the form of a table.
Have you ever head of this function? It won't
Anthony Marlow wrote:
Hi,
I just bought a book called, "PHP 5/MySQL Programming for the Absolute
Beginner," by Andy Harris. I'm brand new to PHP, Apache and MySQL,
and I'm stuck on chapter One, which covers configuring Apache to work
with PHP.
In the book, on page 11, he says to open the Apach
".
Then we ran ldconfig again (you could also just reboot), and the error
message went away.
- Paul
Paul Baranowski wrote:
I just downloaded and tried to build & install PHP 5.0.1. Everything went fine until the install, wh
nstaller] Error 127
make: *** [install-pear] Error 2
Any help will be greatly appreciated. Thanks!
- Paul Baranowski
[EMAIL PROTECTED]
Title: Message
I would appreciate
any help or suggestions I can get.
I have Win XP, 2.8
GHz, 1G RAM and have Apache2 installed and running. I tried initially to install
PHP as a module. However, Apache2 wouldn't start and it appears that the reason
is that the line AddModule mod_php4.c in
n your webtree.. and go to it
>via the web. see if it works. if so your good.. and something to do
>with post-nuke.
>
>if it doesn't.. then see what status gives you.. maybe that will lead to
>the problem.
>
>--mike terzo
>
Paul Furman wrote:
I also cannot get mail t
I also cannot get mail to work. I'm tinkering with a php package
post-nuke that registers users & gets submissions. It's set up on my
home win2k box with apache server and as I understand php has a mail
server but maybe I need to also install a mail server. I changed SMTP in
my php.ini from the
After I associated php with my html editor, or maybe something odd about
running php thru an apache server on my machine, I cannot view this php
generated page that is supposed to download some real video:
http://majestic.ipolis.net/ops/tplgen.php?X=C1001&T=sfgtv&S=R4-330
if I open in a new wind
OK I got it working. I really don't know what I had wrong or what I did.
I posted the files that worked here:
http://www.edgehill.net/html/php
hurah!
: - )
Paul Furman wrote:
I'm charting my progress installing on a win2k machine here:
http://www.edgehill.net/html/php/instal
ror messages, it just doesn't do anything. View source shows my php
code:
I've never set these things up before so maybbe I'm missing something
obvious?
Paul Furman wrote:
I'm charting my progress installing on a win2k machine here:
http://www.edgehill.net/html/php/ins
messages to look at, I don't know what else to do
besides reading about the manual install which is pretty much over my
head though I'm trying. I'm running the machine as administrator so
permissions shouldn't be a problem.
Thanks,
Paul
Can anyone please look at my website. It contains all these strange errors I
didnt have before reinstalling my compo. Allthough, everything is identical
(except for newer gallery-version)
I have no idea of how to solve it..
http://palleman.mine.nu/gallery
Best Regards
Paul
x27;--with-freetype-dir=/usr/lib'
'--enable-gd-native-ttf' '--with-ldap' '--with-mime-magic' '--enable-ftp'
'--enable-exif' '--with-java=/usr/local/java1.4'
I'm thinking that I might need to add something to the library pa
Hi,
My apache webserver is working perfectly..
I follow the instructions to install php but its not working.
It wont load PHP when starting apache again.
Can anyone help me?
Rgds
Paul
Hi,
I'm trying to install php 4.3.3 with support for mssql server on a Slackware
8.1 box (kernel 2.4.20)
I've installed freeTDS library from http://www.freetds.org/
When i'm trying to run Apache server i got Segmentation fault
Anyone can help me plz ?!
--
I have been having fun trying to get PHP up and running on Win2003. I have
used the same install package (php-4.3.1-installer.exe) as I have in the
past for Win2k and WinXP systems (with no issues) but get no results from
server 2003...
Has anyone had similar issues by any chance?
Thanks, PK
still not
getting the phpinfo displayed - the apache screen http://localhost appears
correctly, can anyone help. I am not sure which area the fault lies any help
appreciated
Regards
Paul Myers
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
f PHP 4.3.0 and Apache 1.3 running on a
RH80 box with httpd2 removed. I'd pick stability over bells & whistles any
day. Thats why we run on *nix and not Windoze ;o)
Regards,
- Paul -
- Original Message -
From: "Goetz Lohmann" <[EMAIL PROTECTED]>
To: <[EMAIL PROTEC
oved all traces of Apache 2
first. The PHP version I use is 4.3.0.
Regards,
- Paul -
- Original Message -
From: "Mitch Pirtle" <[EMAIL PROTECTED]>
To: "Paul Gardiner" <[EMAIL PROTECTED]>; "Lukasz Karapuda"
<[EMAIL PROTECTED]>; <[EMAIL PRO
th the informix side of things
but everything seems to work.
I've included my stripped down build process below for you to have a look
at.
Regards,
- Paul -
# INFORMIX
#!/bin/sh
#
# buildinformix.sh
#
# This script re-builds $INFORMIXDIR/lib/esql/libifgen.so from libifgen.a
# to enable ph
Linux RH 7.3
Apache 2.0.43
php 4.3
configure --with-mysql --with -apxs
but it fails on startup
Suggestions?
I have seen the problem in the list but no solutions?
Starting httpd: Syntax error on line 231 of
/usr/local/apache2/conf/httpd.conf:
Cannot load /usr/local/apache2/libexec/libphp4.so int
<<...OLE_Obj...>>
> I am installing on AIX version 4.3. 3, and I get the error above.
> I used the following configure options:
>
> ./configure --with-mysql=/usr/local/sql
>
> Thanks
> PKE
>
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net
> I am installing on AIX version 4.3. 3, and I get the error above.
> I used the following configure options:
>
> ./configure --with-mysql=/usr/local/sql
>
> Thanks
> PKE
>
>
> <<...OLE_Obj...>>
>
>
>
>
>
>
>
>
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe
> <<...OLE_Obj...>>
>
>
I am installing on AIX version 4.3. 3, and I get the error above.
I used the following configure options:
./configure --with-mysql=/usr/local/sql
Thanks
PKE
>
>
>
>
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http:/
ta from the
database just the output file is never created. Please Please help . I would
like to think I will become better at installs etc later and could help
others on the webs
Thanks very much,
Paul Trimming
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
they are using that are working nicely
together? Just reply in this newsgroup plz.
Paul
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
> register_global is off by default, you have read that at the end of the
configure script :).
Merci Pierre, discovered this just after I posted :) It's been a looong day
..
Paul
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Hi,
Re-installed php 4.2.1 with apache 1.3.26 for curl support; and now I have
to use the $_GET or $_POST globals to access variables I'm passing to php
scripts. Ie, if the URL is http://www.url.com/script.php?myvar=tangy
I have to assign $myvar = $_GET["myvar"] rather than just being able to us
usr' '--with-pgsql=shared'
'--with-snmp=shared,/usr' '--with-snmp=shared'
'--enable-ucd-snmp-hack' '--with-unixODBC=shared'
'--enable-memory-limit' '--enable-bcmath' '--enable-shmop'
'--enable-versioning' '--enable-calendar' '--enable-dbx'
'--enable-dio' '--enable-mcal' '--enable-mbstring'
'--enable-mbstr-enc-trans' '--with-apxs=/usr/sbin/apxs'
<***>GD Module<***>
GD Support enabled
GD Version 1.6.2 or higher
FreeType Support enabled
FreeType Linkage with freetype
JPG Support enabled
PNG Support enabled
WBMP Support enabled
So it seems to me that GD is enabled, and FreeType is enabled,
and yet I get warnings/errors when trying to use ImageFTText();
Is this a configuration problem on my part?
Any help/suggestions would be appreciated.
Paul
Hi Geoff,
In the php.ini file there is a line which probably reads:
register_globals=Off
if you change that to:
register_globals=On
See if that helps :)
Paul
"Geoff" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Im running
.apage.com?var1=something an empty
www.apage.com comes up indicating that the ?var1=something portion is not
being received.
The frustrating thing is that my code runs fine on other servers but not my
system.
Paul
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://w
hectl stop and apachectl start my test
script (basically a phpnifo()) confirmed that the module had not been
updated. My apache version is 1.3.something.
Am I missing something here?
Thanks,
Paul Morabito.
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.ph
Hello all,
Just trying to help a mate install php on xp but having problems. He's using
xp and Xitami web server and i've spent some time trying to get it working
but have had no luck.
Has anyone else come over this? or could suggest something to try?
Paul
--
PHP Install Mailing
s my
embedded device. I am attempting to create a web
page to aid in the control of the embedded device.
Thanks,
Paul Stevens
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
unresolved 'getspnam' . It used to be that the module had a problem but
as that's now fixed it's the CGI's turn. Sigh...
Regards,
- Paul -
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
ff list, so i thought i send it along.
>
> jeff
>
>
> Paul Watson
> <[EMAIL PROTECTED]>To: [EMAIL PROTECTED]
>cc:
> 01/30/2002 09:46 Sub
PHP was configured and I was able to query
> my LDAP database.
>
> I think as long as PHP has --with-ldap you should be good.
>
> --Tony
>
> On Wed, 2002-01-30 at 08:09, Paul Watson wrote:
> > I want to use PHP to chat away to our LDAP server (separate machine).
> &
I want to use PHP to chat away to our LDAP server (separate machine).
>From the install notes it appears I can't do this install unless I
have a locally installed LDAP system. This doesn't appear correct.
--
Paul Watson #
Oninit Ltd # G
to learn it for my own websites.
Thanks very much for any help
Paul
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
To contact the list administrators, e-mail: [EMAIL PROTECTED]
thank you -paul
--
PHP Install Mailing List (http://www.php.net/)
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
To contact the list administrators, e-mail: [EMAIL PROTECTED]
you deleted before the config.cache file
(think
> there could be a bug with overwriting it).
>
> Hope this helps!
>
> Stefan Siefert
>
> -Ursprüngliche Nachricht-
> Von: Paul [mailto:[EMAIL PROTECTED]]
> Gesendet: Montag, 22. Oktober 2001 15:56
> An:
somebody, anybody, please help :(
"Paul" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I'm trying to build php.4.0.6 from source and the first I get an error
while
> using the --with-gd switch so I
Hi Brent,
I'm afraid no idea's why you're having the problem but 4.0.6 & pdflib 4.0.1
do work.
- Paul -
- Original Message -
From: "Mark Newnham" <[EMAIL PROTECTED]>
To: "'Brent Meshier'" <[EMAIL PROTECTED]>; <[EMAIL PROT
1 - 100 of 146 matches
Mail list logo
