On 11/24/20 4:26 AM, Johannes Kimmel wrote:
> By setting 'auto', the zero address or the empty string as source
> address (option ipaddr, option ip6addr), vxlan will choose one
> dynamically. This helps in setups where a wan ip or prefix changes.
>
> This corresponse to setting up an vxlan tunnel
On 1/23/21 1:58 AM, David Bauer wrote:
Enable support for the Ubiquiti UniFi Outdoor+ RF filter via
device-tree. The old way of using platform data is not required anymore,
as it was only used on the now removed ar71xx target.
Signed-off-by: David Bauer
---
.../ath/551-ath9k_ubnt_uap_plus_hsr
by name and use the last entry
by default, so "foo" would be used to satisfy a dependency on "bar".
Change the logic to prefer the actual package "bar" in this case.
Signed-off-by: Matthias Schiffer
---
libopkg/pkg_hash.c | 14 --
1 file changed, 12 insertion
On 3/13/21 3:52 AM, Daniel Golle wrote:
On Sat, Mar 13, 2021 at 02:00:40AM +0100, Matthias Schiffer wrote:
When one package "provides" another non-virtual package, prefer to use
the original package instead of the providing package.
Example:
Consider packages "foo" a
Building the loader in Image/Build/TPLINK-SAFELOADER would break the image
builder as no target compiler is available in that stage.
Fixes #19580
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/image/Makefile | 8 ++--
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a
he TP-LINK CPE series).
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/image/Makefile | 22 ++
1 file changed, 22 insertions(+)
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index e4f6c71..06e2c0d 100644
--- a/target/linux/ar71xx/
This also changes the MAC address to one of the adresses actually used by the
stock firmware on one of the ethernet interfaces.
Signed-off-by: Matthias Schiffer
---
target/linux/mpc85xx/base-files/etc/uci-defaults/02_network| 2 --
target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl
Signed-off-by: Matthias Schiffer
---
.../101-NET-add-of_get_mac_address_mtd.patch | 76 ++
.../102-net-gianfar-use-mtd-mac-address.patch | 19 ++
2 files changed, 95 insertions(+)
create mode 100644
target/linux/mpc85xx/patches-3.18/101-NET-add
This will make these files much more maintainable.
Signed-off-by: Matthias Schiffer
---
.../files/arch/powerpc/boot/cuboot-tl-wdr4900-v1.c | 168 +++
.../files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts | 212
.../arch/powerpc/platforms/85xx/tl_wdr4900_v1.c| 145 ++
.../140
On 04/30/2015 11:59 AM, Jonas Gorski wrote:
> Hi,
>
> On Thu, Apr 30, 2015 at 4:00 AM, Matthias Schiffer
> wrote:
>> Signed-off-by: Matthias Schiffer
>> ---
>> .../101-NET-add-of_get_mac_address_mtd.patch | 76
>> ++
>> ...
The ability to read MAC addresses from MTD is useful for other targets besides
ramips and lantiq as well.
Signed-off-by: Matthias Schiffer
---
.../681-NET-add-of_get_mac_address_mtd.patch | 75 +
.../681-NET-add-of_get_mac_address_mtd.patch | 75
Signed-off-by: Matthias Schiffer
---
.../101-net-gianfar-use-mtd-mac-address.patch | 19 +++
1 file changed, 19 insertions(+)
create mode 100644
target/linux/mpc85xx/patches-3.18/101-net-gianfar-use-mtd-mac-address.patch
diff --git
a/target/linux/mpc85xx/patches-3.18
This will make these files much more maintainable.
Signed-off-by: Matthias Schiffer
---
.../files/arch/powerpc/boot/cuboot-tl-wdr4900-v1.c | 168 +++
.../files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts | 212
.../arch/powerpc/platforms/85xx/tl_wdr4900_v1.c| 145 ++
.../140
This also changes the MAC address to one of the adresses actually used by the
stock firmware on one of the ethernet interfaces.
Signed-off-by: Matthias Schiffer
---
target/linux/mpc85xx/base-files/etc/uci-defaults/02_network| 2 --
target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl
On 03/21/2015 10:16 AM, Stefan Rompf wrote:
> Hi Sergey,
>
>> You should be a wizard to reveal hw protocol without touching hw :)
>
> I cannot say 'Mischief managed!' by now, but it's slowly making progress ;-)
>
>> Unlikely that iwconfig changes something directly, I would bet on the
>> driver.
Ping?
On 04/29/2015 11:38 PM, Matthias Schiffer wrote:
> Building the loader in Image/Build/TPLINK-SAFELOADER would break the image
> builder as no target compiler is available in that stage.
>
> Fixes #19580
>
> Signed-off-by: Matthias Schiffer
> ---
> target/linux/a
The v1 identifies as v10 internally. As there is no TL-WA830RE v10, add a
workaround to avoid confusing users.
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/base-files/lib/ar71xx.sh | 4
1 file changed, 4 insertions(+)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
On 06/10/2015 02:01 PM, Bastian Bittorf wrote:
> * thomas.lan...@lantiq.com [10.06.2015 13:59]:
>> I think this will not work, as /etc/profile (and these additional files) is
>> expected to be executed in the current shell context.
>> Otherwise adding shell variables or extending $PATH will not w
On 06/10/2015 04:27 PM, Hendrik Lüth wrote:
> Am 10.06.2015 um 14:31 schrieb Bastian Bittorf:
>> * Matthias Schiffer [10.06.2015 14:26]:
>>> Why should errors in these files cause login issues? This is shell and
>>> there's no -e, problematic lines will print an
On 06/08/2015 05:47 PM, Daniel Petre wrote:
> TP-Link ships wr740n v5.0 to Romania (so probably everywhere except
> China) with 4 MB flash and 32 MB memory (confirmed by their local
> support). This patch adds support for the v5.0 clone of v4, i just
> tested it on my own v5.0 router and it works.
This device is identical to the TL-WR740N v5, it even uses the same HWID (which
wasn't the case for older TL-WR741ND revisions).
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/image/Makefile | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/target/
On 07/02/2015 08:49 AM, miaoq...@qti.qualcomm.com wrote:
> From: Miaoqing Pan
>
> Patch cherry-picked from the following location:
> https://www.codeaurora.org/cgit/quic/qsdk/oss/system/openwrt/commit/?h=release/coconut_ioe4531_2.0&id=5c357bf6c763e4140dddcc9a3bc5f005525a9c0e
>
> Changelist,
>
On 07/04/2015 10:32 PM, Christian Mehlis wrote:
> Am 02.07.2015 um 23:10 schrieb Matthias Schiffer:
>> I've fixed it
>> up using the following snippet, the Compex WPJ531 will probably need the
>> same fix (it uses pretty much the same initialization code).
>
The initialization routines for these boards were relying on some (wrong)
defaults for the QCA953x ethernet. Make these defaults explicit to prevent
breaking them when the QCA953x defaults are fixed.
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n
Matthias Schiffer (1):
ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link
TL-WR841N/ND v9, Compex WPJ531)
Miaoqing Pan (2):
ar71xx: rework patch for qca953x/956x
ar71xx: add support for ap143
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target
From: Miaoqing Pan
Signed-off-by: Miaoqing Pan
---
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
target/linux/ar71xx/config-3.18| 1 +
.../ar71xx/files/arch/mips/ath79/mach-ap143.c | 142 +++
GPIO pin count to 18
- fix chained irq disabled
- fix GMAC0/GMAC1 initial
- fix WMAC irq number to 47
- merge the changes of dev-eth.c from the patch to file.
Signed-off-by: Miaoqing Pan
Signed-off-by: Matthias Schiffer
---
.../linux/ar71xx/files/arch/mips/ath79/dev-eth.c |
used) and ensures netinet/ether.h
is included early.
Signed-off-by: Matthias Schiffer
---
A similar fix is necessary in the 15.05 tree, but as r46161 has not been
backported, this patch won't work without changes. Of course, one option
would be to remove musl and all musl-related patches from
On 07/08/2015 07:42 PM, Bruno Randolf wrote:
> Hi!
>
> I have the below change to add rudimentary support for sysupgrade on the
> Raspberry Pi. I looked at the way platform_copy_config() is implemented
> for x86 and tried to do the same, but I get the following error on mount:
>
> mount: mounting
Hi,
I've noticed that OpenWrt currently uses the soft-float ABI in the
Raspberry Pi images. Is there a specific reason hard float is not used,
even though most other distributions like Raspbian have switched to it?
I tried adding "fpu" to FEATURES to enable hard-float, and the generated
images see
On 07/11/2015 07:21 PM, Florian Fainelli wrote:
> Le 11 juil. 2015 09:52, "Matthias Schiffer"
> a écrit :
>>
>> Hi,
>> I've noticed that OpenWrt currently uses the soft-float ABI in the
>> Raspberry Pi images. Is there a specific reason hard
The ext4 images are huge uncompressed.
Signed-off-by: Matthias Schiffer
---
target/linux/sunxi/image/Makefile | 4
1 file changed, 4 insertions(+)
diff --git a/target/linux/sunxi/image/Makefile
b/target/linux/sunxi/image/Makefile
index 19ab935..d3f4409 100644
--- a/target/linux/sunxi
Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix the
ImageBuilder. Similar fixes are necessary for many (all?) other uboot
targets.
Also remove the DTS copy command, BIN_DIR was unnecessarily cluttered with
DTS files unrelated to the chosen profile.
Signed-off-by: Matthias
As I wrote in my last mail, using the same toolchain build/staging dirs
with different float ABIs seems broken to me and should be fixed before
any further work is done towards adding hard float support to BCM270x.
After thinking a bit more about this, I came to the conclusion that the
whole CONFI
On 07/17/2015 07:18 PM, Bruno Randolf wrote:
> Signed-off-by: Bruno Randolf
> ---
> target/linux/brcm2708/image/Makefile | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/target/linux/brcm2708/image/Makefile
> b/target/linux/brcm2708/image/Makefile
> index e70bdd0..90d54bb 100644
> --
first non-printable character and explicitly
setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will
definitely work like this, even when awk supports locales and LANG is set).
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/base-files/lib/ar71xx.sh | 2 +-
1 file changed, 1
On 07/24/2015 09:30 AM, John Crispin wrote:
>
>
> On 16/07/2015 22:20, Matthias Schiffer wrote:
>> -BOARDS:= \
>> -sun4i-a10-cubieboard \
>> -sun4i-a10-olinuxino-lime \
>> -sun4i-a10-pcduino \
>> -sun5i-a13-olinuxino \
>> -
Hi,
I'd like to propose to split the current "base" opkg repo into two, one
for userspace applications and one for kernel modules. This would
greatly simplify providing your own kernel module repository with
modules for a customized kernel, while still being able to rely on the
upstream "base" repo
On 07/25/2015 03:55 PM, John Crispin wrote:
>
>
> On 25/07/2015 14:46, Matthias Schiffer wrote:
>> Hi,
>> I'd like to propose to split the current "base" opkg repo into two, one
>> for userspace applications and one for kernel modules. This would
>
On 07/25/2015 06:16 PM, Florian Fainelli wrote:
> On Jul 25, 2015 7:39 AM, "Matthias Schiffer"
> wrote:
>>
>> On 07/25/2015 03:55 PM, John Crispin wrote:
>>>
>>>
>>> On 25/07/2015 14:46, Matthias Schiffer wrote:
>>>> Hi,
>>&
On 07/31/2015 06:06 PM, Zoltan HERPAI wrote:
> On Sun, 26 Jul 2015, Zoltan HERPAI wrote:
>
>> On Fri, 24 Jul 2015, John Crispin wrote:
>>
>>> On 16/07/2015 22:20, Matthias Schiffer wrote:
>>>> -BOARDS:= \
>>>> -sun4i-a10-cubieboard \
>&
and no USB...).
Fix this by adding proper support for the device.
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
.../ar71xx/base-files/etc/uci-defaults/01_leds | 9 ++
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/
Please ignore this patch for now, the WLAN isn't working correctly, I'll
have a look at that first.
Matthias
On 08/06/2015 02:40 AM, Matthias Schiffer wrote:
> The images currently generated for the TL-WR941ND v6 try to treat it like
> a TL-WDR3500, which doesn't make any
Hi,
as I've already written on the OpenWrt ML, I'm currently porting OpenWrt
to the TP-LINK TL-WR941ND v6, which uses a TP9343 SoC (which is
confusingly part of the QCA956x series). The WMAC identifies as QCA9561
(0x600 rev 0).
I'm unable to get the WLAN working at all. The TX seems to work fine (
Using the postinst script for sanity checks and expecting opkg to fail
if the postinst didn't return 0 was possible in Barrier Breaker, propagate
the real postinst return code through default_postinst to restore this
behaviour.
Signed-off-by: Matthias Schiffer
---
package/base-files/file
The DTS files aren't useful (other targets don't copy them either) and
clutter BIN_DIR with files unrelated to the chosen profile.
Signed-off-by: Matthias Schiffer
---
target/linux/sunxi/image/Makefile | 30 +-
1 file changed, 5 insertions(+), 25 deletion
Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix
ImageBuilder. Similar fixes are necessary for many (all?) other uboot
targets.
Signed-off-by: Matthias Schiffer
---
package/boot/uboot-sunxi/Makefile | 14 +++---
target/linux/sunxi/image/Makefile | 4 ++--
2 files
Signed-off-by: Matthias Schiffer
---
target/linux/sunxi/image/Makefile | 4
1 file changed, 4 insertions(+)
diff --git a/target/linux/sunxi/image/Makefile
b/target/linux/sunxi/image/Makefile
index 45e8dea..905188b 100644
--- a/target/linux/sunxi/image/Makefile
+++ b/target/linux/sunxi
d-off-by: Matthias Schiffer
---
target/linux/sunxi/image/Makefile | 16 ++--
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/target/linux/sunxi/image/Makefile
b/target/linux/sunxi/image/Makefile
index 19ab935..45e8dea 100644
--- a/target/linux/sunxi/image/Makefile
Hi,
these two patches allow building OpenWrt in its default configuration
without having to download and build libopenssl (which seems desirable as
the OpenSSL download links break so often).
Matthias Schiffer (2):
opkg: work around unconditional libopenssl build dependency
hostapd: work
As the OpenWrt build system only resolves build dependencies per directory,
all hostapd variants were causing libopenssl to be downloaded and built,
not only wpad-mesh. Fix this by applying the same workaround as in
ustream-ssl.
Signed-off-by: Matthias Schiffer
---
package/network/services
As the OpenWrt build system only resolves build dependencies per directory,
all opkg variants were causing libopenssl to be downloaded and built,
not only opkg-smime. Fix this by applying the same workaround as in
ustream-ssl.
Signed-off-by: Matthias Schiffer
---
package/system/opkg/Makefile
On 09/01/2015 06:21 AM, miaoq...@qti.qualcomm.com wrote:
> From: Miaoqing Pan
>
> This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
> 2015-August/034979.html. As the peak detect calibration is set
> incorrectly.
>
> Signed-off-by: Miaoqing Pan
Tested-
Your .config doesn't match the current OpenWrt trunk (the musl version
number is set in .config). Just run `make oldconfig` (or `make
menuconfig` and save without changing anything) to fix it.
On 09/06/2015 12:23 AM, Derek Werthmuller wrote:
> Not sue where the Makefile is for this package, but I
On 02/07/2016 05:29 AM, Sven Roederer wrote:
> The hardware of the v3 is identical to the v2.
>
> Based-on-patch-by: nbd (b9d5ee8)
>
> - Backport to CC
> - add TPL-WR1043v3 to list of supported boards in config-menu
> - was tested for all 3 boards by freifunk-community Berlin
>
> Signed-off-by:
Hi,
I've noticed that the DIR-505 has a very weird network setup:
(1) The kernel sets up eth0 and eth1; the DIR-505 has only one ethernet
port though, so eth0 is always dead. /etc/config/network is setup to
only use eth1.
(2) The single status LED is currently abused as ethernet traffic
indicator.
Signed-off-by: Matthias Schiffer
---
tools/firmware-utils/Makefile| 2 +-
tools/firmware-utils/src/mkfwimage.c | 12 +---
2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
index 7a4403c..2573d8c 100644
The ubdev01 profile defines its own MTDPARTS with smaller firmware
partition, so give it its own UBNT_BOARD in mkfwimage.
Signed-off-by: Matthias Schiffer
---
target/linux/ar71xx/image/Makefile | 2 +-
tools/firmware-utils/src/mkfwimage.c | 6 ++
2 files changed, 7 insertions(+), 1
ffect.)
Fix all of this by setting the correct flash layout also used by the stock
firmware. Flashing has been tested from both firmware 5.5.x and 5.6.x. The
fixed layout also matches the mtdparts defined by OpenWrt.
Signed-off-by: Matthias Schiffer
---
tools/firmware-utils/src/mkfwimage.c | 2 +-
of this code
will be used.
Reported-by: Hante Meuleman
Signed-off-by: Hauke Mehrtens
[Backport of r47467. The recent mac80211 backport was missing this patch,
breaking the build of the brcmfmac module]
Signed-off-by: Matthias Schiffer
---
This fixes the compile failure of the brcmfmac module
Hi,
nbd asked for suggestions for patches to backport to CC, so here I deliver
the set of patches we're currently carrying in Gluon and that I deem worthy
for backporting. See below for some additional comments regarding the
patches.
We also carry two kernel bugfixes backported from 4.x to 3.18. W
This device is identical to the TL-WR740N v5, it even uses the same HWID (which
wasn't the case for older TL-WR741ND revisions).
Signed-off-by: Matthias Schiffer
Backport of r46238
---
target/linux/ar71xx/image/Makefile | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
TP-Link ships wr740n v5.0 to Romania (so probably everywhere except
China) with 4 MB flash and 32 MB memory (confirmed by their local
support). This patch adds support for the v5.0 clone of v4, i just
tested it on my own v5.0 router and it works.
Signed-off-by: Daniel Petre
Backport of r46115
--
The DTS files aren't useful (other targets don't copy them either) and
clutter BIN_DIR with files unrelated to the chosen profile.
Signed-off-by: Matthias Schiffer
Backport of r46604
---
target/linux/sunxi/image/Makefile | 30 +-
1 file changed, 5 inserti
Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix
ImageBuilder. Similar fixes are necessary for many (all?) other uboot
targets.
Signed-off-by: Matthias Schiffer
Backport of r46605
---
package/boot/uboot-sunxi/Makefile | 15 ---
target/linux/sunxi/image/Makefile
Signed-off-by: Matthias Schiffer
Backport of r46608
---
target/linux/sunxi/image/Makefile | 4
1 file changed, 4 insertions(+)
diff --git a/target/linux/sunxi/image/Makefile
b/target/linux/sunxi/image/Makefile
index 19ab935..d3f4409 100644
--- a/target/linux/sunxi/image/Makefile
+++ b
Signed-off-by: Steven Barth
Backport of r46408
---
package/network/ipv6/odhcp6c/Makefile| 2 +-
package/network/ipv6/odhcp6c/files/dhcpv6.script | 2 +-
package/network/ipv6/odhcp6c/files/dhcpv6.sh | 6 --
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/package
Using the postinst script for sanity checks and expecting opkg to fail
if the postinst didn't return 0 was possible in Barrier Breaker, propagate
the real postinst return code through default_postinst to restore this
behaviour.
Signed-off-by: Matthias Schiffer
Backport of r46653
---
pa
Better synchronize RA & DHCPv6 events
Accumulate some events to avoid flooding
Restart softwires for address and prefix changes
Signed-off-by: Steven Barth
Backport of r46518
---
package/network/ipv6/odhcp6c/Makefile| 4 ++--
package/network/ipv6/odhcp6c/files/dhcpv6.script | 7
There is no reason for the internal functions not to be static.
Signed-off-by: Matthias Schiffer
Backport of r47210
---
tools/firmware-utils/src/tplink-safeloader.c | 22 +++---
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/tools/firmware-utils/src/tplink
The hardware is identical to version 1.0, add the new models to the support
list.
Also remove the empty line at the end of the support list, the current
stock images don't have it either.
Signed-off-by: Matthias Schiffer
Backport of r47212
---
tools/firmware-utils/src/tplink-safeloader.
The first 4 bytes of the support list and the vendor information are
supposed to contain the length of these fields.
Signed-off-by: Matthias Schiffer
Backport of r47211
---
tools/firmware-utils/src/tplink-safeloader.c | 47 ++--
1 file changed, 30 insertions(+), 17
The hardware of the v3 is identical to the v2.
Based-on-patch-by: Andreas Ziegler
Signed-off-by: Matthias Schiffer
Backport of r47406
---
target/linux/ar71xx/image/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux
The hwid check was wrong, causing the AR71XX_MODEL value to end with a
space (as $hwver was unset).
Signed-off-by: Matthias Schiffer
Backport of r47553
---
target/linux/ar71xx/base-files/lib/ar71xx.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/base
Signed-off-by: Felix Fietkau
Backport r47626
---
.../462-m25p80-mx-disable-software-protection.patch| 10 ++
1 file changed, 10 insertions(+)
create mode 100644
target/linux/generic/patches-3.18/462-m25p80-mx-disable-software-protection.patch
diff --git
a/target/linux/gen
fix rescue mode on wdr4900
Signed-off-by: Alexander Couzens
Backport of r48793
---
package/kernel/linux/modules/input.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/kernel/linux/modules/input.mk
b/package/kernel/linux/modules/input.mk
index 86ff33c..eed9aa2 1006
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.
The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
The initialization routines for these boards were relying on some (wrong)
defaults for the QCA953x ethernet. Make these defaults explicit to prevent
breaking them when the QCA953x defaults are fixed.
Signed-off-by: Matthias Schiffer
Backport of r46206
---
target/linux/ar71xx/files/arch/mips
In fb6f62e97733312053ab593fcf68eea47a21169e several settings
are set on the ethernet device, but they are not working.
Fix Ethernet by setting the right values.
Signed-off-by: Christian Mehlis
Backport of r46281
---
target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c | 4 ++--
1 file chang
Signed-off-by: Christian Mehlis
Backport of r46283
---
target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
index 2cc2fe8..8a2
o 18
- fix chained irq disabled
- fix GMAC0/GMAC1 initial
- fix WMAC irq number to 47
- merge the changes of dev-eth.c from the patch to file.
Signed-off-by: Miaoqing Pan
Signed-off-by: Matthias Schiffer
Backport of r46207
---
.../linux/ar71xx/files/arch/mips/ath79/dev-eth.c |
It seems there are two *different* versions on TL-WR941ND v6: Chinese
and European one. Currently supported by OpenWrt is Chinese one. Rename
firmware to make it clear.
For details see:
http://wiki.openwrt.org/toh/tp-link/tl-wr941nd
https://forum.openwrt.org/viewtopic.php?id=59295
Signed-off-by: R
OpenSSL moves old versions of the library from
http://www.openssl.org/source/ to
http://www.openssl.org/source/old/$version/ breaking the old links.
That behavior breaks the OpenWRT-build every time OpenSSL releases
a new version.
This patch adds http://www.openssl.org/source/old/$version/ to the
In order to set the multicast rate for mesh point interfaces the "mesh join"
was made explicit and moved to mac80211_setup_vif(), similar to how it is
done for IBSS interfaces.
Previously, the mesh join was made implicit in case authentication (i.e.
$key) was not used when creating the interface i
decided to completely reorganize the Kconfig patch even though only
a single section has been added.
Signed-off-by: Matthias Schiffer
Backport of r47420
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
.../ar71xx/base-files/etc/uci-defaults/01_leds | 9 ++
.../ar71xx/base-files
Signed-off-by: Christian Mehlis
Backport of r46282
---
target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c | 11 +--
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach
https://forum.openwrt.org/viewtopic.php?pid=279394
Signed-off-by: Dirk Neukirchen
Backport of r46031
---
package/kernel/linux/modules/usb.mk | 30 ++
1 file changed, 30 insertions(+)
diff --git a/package/kernel/linux/modules/usb.mk
b/package/kernel/linux/modules/us
OpenWrt should support an optional /etc/profile.d directory like
most other Linux distributions. This allows packages to install
their own scripts into /etc/profile.d/ directory.
The file suffix should make clear, that these scripts
are (sourced) shell-snippets. If the user needs e.g. php or lua,
Signed-off-by: Felix Fietkau
Backport of r48732
---
package/kernel/brcm2708-gpu-fw/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/kernel/brcm2708-gpu-fw/Makefile
b/package/kernel/brcm2708-gpu-fw/Makefile
index eee85e0..286984b 100644
--- a/package/kernel/br
Signed-off-by: Matthias Schiffer
Backport of r48827
---
tools/firmware-utils/Makefile| 2 +-
tools/firmware-utils/src/mkfwimage.c | 12 +---
2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
index
ffect.)
Fix all of this by setting the correct flash layout also used by the stock
firmware. Flashing has been tested from both firmware 5.5.x and 5.6.x. The
fixed layout also matches the mtdparts defined by OpenWrt.
Signed-off-by: Matthias Schiffer
Backport of r48829
---
tools/firmware-u
The ubdev01 profile defines its own MTDPARTS with smaller firmware
partition, so give it its own UBNT_BOARD in mkfwimage.
Signed-off-by: Matthias Schiffer
Backport of r48828
---
target/linux/ar71xx/image/Makefile | 2 +-
tools/firmware-utils/src/mkfwimage.c | 6 ++
2 files changed, 7
This enables booting from devices that use an ATI PATA controller for
the boot device, such as the embedded CF cards in Fujitsu-Siemens Futro
thin-clients.
Signed-off-by: Felix Kaechele
Backport of r47304
---
target/linux/x86/generic/config-default | 1 +
1 file changed, 1 insertion(+)
diff --
One of the host patches introduces the new header file lnum_config.h
included by luaconf.h, but doesn't install it.
Install it to allow building C modules for the host Lua.
Signed-off-by: Matthias Schiffer
---
.../lua/patches-host/010-lua-5.1.3-lnum-full-260308.patch | 11 +
On 03/11/2016 02:46 PM, Joseph Marlin wrote:
> We certainly haven't. I've tried applying these patches -
> http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/39001
>
> to no avail. I still get hit by a "Error code 2 - Firmware Check Failed".
>
> I'm really suspecting this comes down to a
On 03/11/2016 05:15 PM, Aaron Z wrote:
> )On Fri, Mar 11, 2016 at 9:28 AM, Matthias Schiffer
> wrote:
>> PS. Completely unrelated to this issue: I noticed in your log that you used
>> the wrong image ("nanostation" instead of "bullet") for your Loco.
On 03/12/2016 02:08 PM, John Crispin wrote:
>
>
> On 11/03/2016 15:28, Matthias Schiffer wrote:
>> On 03/11/2016 02:46 PM, Joseph Marlin wrote:
>>> We certainly haven't. I've tried applying these patches -
>>> http://thread.gmane.org/gmane.comp.embed
On 03/12/2016 03:43 PM, Outback Dingo wrote:
> On Fri, Mar 11, 2016 at 3:28 PM, Matthias Schiffer <
> mschif...@universe-factory.net> wrote:
>
>> On 03/11/2016 02:46 PM, Joseph Marlin wrote:
>>> We certainly haven't. I've tried applying th
On 03/16/2016 01:06 PM, John Crispin wrote:
> The OpenWrt developers are proud to announce the minor fix release of
> OpenWrt Chaos Calmer.
>
>___ __
> | |.-.-.-.| | | |..| |_
> | - || _ | -__| || | | || _||
On 03/16/2016 02:07 PM, Matthias Schiffer wrote:
> On 03/16/2016 01:06 PM, John Crispin wrote:
>> The OpenWrt developers are proud to announce the minor fix release of
>> OpenW
1 - 100 of 352 matches
Mail list logo
