On 09/01/2015 06:21 AM, miaoq...@qti.qualcomm.com wrote:
> From: Miaoqing Pan <miaoq...@codeaurora.org>
> 
> This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
> 2015-August/034979.html. As the peak detect calibration is set
> incorrectly.
> 
> Signed-off-by: Miaoqing Pan <miaoq...@codeaurora.org>

Tested-by: Matthias Schiffer <mschif...@universe-factory.net>

Thanks a lot :)

> ---
>  ...6-ath9k_enable_hw_manual_peak_calibration.patch | 22 
> ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 
> package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch
> 
> diff --git 
> a/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch
>  
> b/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch
> new file mode 100644
> index 0000000..8606493
> --- /dev/null
> +++ 
> b/package/kernel/mac80211/patches/546-ath9k_enable_hw_manual_peak_calibration.patch
> @@ -0,0 +1,22 @@
> +--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
> ++++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
> +@@ -1249,7 +1249,8 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw 
> *ah, u8 chain, bool is_2g)
> +             REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
> +                           AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);
> + 
> +-    if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
> ++    if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) ||
> ++        AR_SREV_9561(ah)) {
> +             if (is_2g)
> +                     REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
> +                                   AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
> +@@ -1640,7 +1641,8 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
> + 
> + skip_tx_iqcal:
> +     if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
> +-            if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || 
> AR_SREV_9550(ah)) {
> ++            if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) 
> ||
> ++                AR_SREV_9561(ah)) {
> +                     for (i = 0; i < AR9300_MAX_CHAINS; i++) {
> +                             if (!(ah->rxchainmask & (1 << i)))
> +                                     continue;
> 


Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to