ated with "make kernel_menuconfig".
Signed-off-by: Evgeniy Didin
Cc: Alexey Brodkin
Cc: John Crispin
---
target/linux/arc770/Makefile | 2 +-
target/linux/arc770/{config-4.9 => config-4.14}| 47 --
...stmmac-Disable-frame-filtering-completely.
On 22/05/18 19:04, Pierre Lebleu wrote:
In order to allow the mounting of the filesystem with the zlib compression,
a new CMake option (eg: CMAKE_OVL_MOUNT_COMPRESS_ZLIB) has been added.
Signed-off-by: Pierre Lebleu
---
v2: change the option name
CMakeLists.txt | 6 ++
libfstools
On 22/05/18 19:04, Pierre Lebleu wrote:
In order to allow the mounting of the filesystem with full access time
accounting, a new CMake option (eg: CMAKE_OVL_MOUNT_FULL_ACCESS_TIME)
has been added.
Signed-off-by: Pierre Lebleu
---
v2: change the option name
CMakeLists.txt | 6 ++
On 24/05/18 17:29, Hannu Nyman wrote:
Increasing the reserved kernel space in master from 2MB to 4MB due to
kernel 4.14 for many ipq806x devices like R7800 has broken the
sysupgrade possibility from 17.01, 18.06 or an earlier master snapshot
build to the current master build. Same goes for th
On 24/05/18 17:42, Hannu Nyman wrote:
John Crispin kirjoitti 24.5.2018 klo 18:36:
On 24/05/18 17:29, Hannu Nyman wrote:
Increasing the reserved kernel space in master from 2MB to 4MB due
to kernel 4.14 for many ipq806x devices like R7800 has broken the
sysupgrade possibility from 17.01
On 27/05/18 18:45, Christian Lamparter wrote:
On Thursday, May 24, 2018 9:06:55 PM CEST Hauke Mehrtens wrote:
We would like to create a lede 17.01.5 release soon, the last release,
lede 17.01.4, was done on 18. October 2017 which was a long time ago.
We are planning to do the build by end of n
On 28/05/18 15:29, Jo-Philipp Wich wrote:
Hi,
This does not make sense, is the alternative to write off openwrt?
Because if ADSL + PPPoA do not work, then it is useless.
Indeed, if OpenWrt does not work for your device then you should look
for alternatives or try to dig into the issue yourse
On 28/05/18 14:35, Bjørn Mork wrote:
I just tried to follow a link I had referred to in another dicussion
( http://lists.infradead.org/pipermail/lede-dev/2018-April/011701.html )
and got "403 Forbidden". I note that the article now is available as
http://lists.infradead.org/pipermail/openwrt
On 28/05/18 17:40, wnr200...@memeware.net wrote:
I reported here an issue with the build system creating too big
images:
https://forum.lede-project.org/t/help-required-to-fix-bug-porting-from-legacy-to-generic-build-form-wnr2000v3-4-32-device/14693
Borromini then reported this here:
https:/
On 27/05/18 13:43, Christo Nedev wrote:
Fix brcm2710 image boot issues.
please describe the issues and how they are fixed.
John
Signed-off-by: Christo Nedev
---
package/kernel/brcm2708-gpu-fw/Makefile | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git
On 30/05/18 07:41, murug...@codeaurora.org wrote:
Hi OpenWRT team,
This is Sathishkumar working for ath10k WLAN driver and came across below
OpenWRT hostapd/wpa_s patches which are added for supporting AP+STA mode in
OpenWRT supported platforms.
•
https://github.com/openwrt/openwrt/blob/maste
On 01/06/18 02:04, Achim Gottinger wrote:
Am 31.05.2018 um 20:12 schrieb Achim Gottinger:
Am 31.05.2018 um 19:12 schrieb Achim Gottinger:
Hello List,
Since the commit
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c00e5a4f09115ec976fac7dc380f576ef6a24fab
strongswan is broken
On 28/05/18 00:23, Christo Nedev wrote:
New package brcmfmac-firmware-43455-sdio.
Content:
brcmfmac43455-sdio.bin
brcmfmac43455-sdio.clm_blob
brcmfmac43455-sdio.txt
Source:
https://github.com/RPi-Distro/firmware-nonfree.git
Bit newer from CYPRESS here:
https://community.cypress.com/servlet/J
On 29/05/18 11:43, michael.g...@lantisproject.com wrote:
From: Michael Gray
The console bootarg is being corrupted on boot, causing various issues
including broken sysupgrade.
Utilising the bootargs mangle patch from other targets, hardcode the console
arguments and fetch the rootfs from the
On 17/06/18 16:09, Magnus Kroken wrote:
Signed-off-by: Magnus Kroken
Hi,
patch collides with another one i just merged, please rebase/send this one
John
---
Runtime-tested on
* powerpc/mpc85xx (with 4.14 support patches by Achim Gottinger)
* mips/ath79
include/kernel-version.mk
On 11/06/18 00:42, Christo Nedev wrote:
brcmfmac-firmware-43455-sdio
Content:
brcmfmac43455-sdio.bin
brcmfmac43455-sdio.clm_blob
brcmfmac43455-sdio.txt
Source:
https://github.com/RPi-Distro/firmware-nonfree.git
Signed-off-by: Christo Nedev
Hi,
sorry for the late reply, patch fails to app
On 18/06/18 09:06, Alexandru Ardelean wrote:
On Mon, Jun 18, 2018 at 5:07 AM, Eneas U de Queiroz via openwrt-devel
wrote:
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the origi
This problem was introduced in your commit:
https://git.openwrt.org/c00e5a4f09115ec976fac7dc380f576ef6a24fab
Hauke
Acked-by: John Crispin
looks good, but does not apply. please rebase/send. I'll merge a V2.
John
diff --git a/target/linux/mpc85xx/config-4.9
b/target/linux/mpc85xx/config-
On 20/06/18 10:39, Lucian Cristian wrote:
On 20.06.2018 11:26, Robert Marko wrote:
You are missing CONFIG_NET_DSA_TAG_QCA
Thanks but it doesn't help !
Regards
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.
On 21/06/18 22:58, Rosen Penev wrote:
error: ‘%d’ directive output may be truncated writing between 2 and 10
bytes into a region of size 3 [-Werror=format-truncation=]
snprintf(fd_buf, sizeof(fd_buf), "%d", wdt_fd);
^~~
note: directive argument in the range
On 24/06/18 10:19, Rafał Miłecki wrote:
From: Rafał Miłecki
Having "select PACKAGE_zoneinfo-core" wasn't enough for builds without
php7-cli=y or php7-cgi=y. It didn't result in installing zoneinfo-core
when using "opkg install" (during runtime or when building images with
CONFIG_TARGET_PER_DE
On 23/06/18 22:49, Rosen Penev wrote:
From: NeilBrown
The MT7621 documentation says that the sys clock - also known
as OCP clock for the Open Core Protocol - can be configured to
1/3 or 1/4 of the CPU clock.
Testing on my hardware, using the fact that the SPI clock is
based on the OCP clock a
gawd, merging your patches is becoming a drag
On 27/06/18 22:21, Koen Vandeputte wrote:
Refreshed all patches
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte
---
include/kernel-version.mk| 4 ++--
.../ar71xx/patches-4.9/
On 28/06/18 22:47, Jouke Witteveen wrote:
+ set_default utf8_ssid 1
does this not make it use utf8 by default ?
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On 12/07/18 04:36, Luis Araneda wrote:
From: Christian Schoenebeck
Override the default shutdown action (stop) and close all processes
of dropbear
Since commit 498fe85, the stop action only closes the process
that's listening for new connections, maintaining the ones with
existing clients.
T
On 06/07/18 14:13, Florian Eckert wrote:
If a "+" is in the version string of a kernel package then the package could
not get installed by opkg with ftp. Because the file could not get found.
"kmod-wireguard_4.4.135%2b0.0.20180519-1_mips_24kc.ipk: No such file or
directory"
The problem is that
On 12/07/18 18:18, Luis Araneda wrote:
Hi John,
On Thu, Jul 12, 2018 at 2:49 AM John Crispin wrote:
does this break sysupgrade when run via ssh ?
No, it works as expected, as sysupgrade is done in stages now.
I just tested with an Asus RT-AC58U connected with a serial console
and an SSH
Signed-off-by: John Crispin
---
vlan.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/vlan.c b/vlan.c
index 067f624..43526d8 100644
--- a/vlan.c
+++ b/vlan.c
@@ -104,6 +104,9 @@ static struct device *get_vlan_device(struct device *dev,
int id, bool create)
struct vlan_device
On 19/07/18 20:08, Thibaut wrote:
On 19 Jul 2018, at 19:52, Mathias Kresin wrote:
2018-07-19 19:26 GMT+02:00 Thibaut VARÈNE :
faf94d926e2810f895f2a98d4a49ee2fe8f673e8 added "support" for a hacked
device where the original boot loader (routerboot) has been replaced
by u-boot.
Support for thi
On 21/07/18 09:44, Thibaut wrote:
Le 21 juil. 2018 à 09:24, John Crispin a écrit :
On 19/07/18 20:08, Thibaut wrote:
On 19 Jul 2018, at 19:52, Mathias Kresin wrote:
2018-07-19 19:26 GMT+02:00 Thibaut VARÈNE :
faf94d926e2810f895f2a98d4a49ee2fe8f673e8 added "support" for a hac
On 27/07/18 17:26, Torbjorn Jansson wrote:
Hello.
Probably over a year ago i built a rasperry pi and made a custom build
of openwrt and added a small patch for myself to make module for htu21
temp and humidity sensor available.
the patch i made i'm not sure if it is correct or not and even
On 29/07/18 11:07, Thibaut VARÈNE wrote:
This patch improves 5684d087418d176cfdef4e045e1950ca7ba3b09f by correcting
the partition scheme for the "RouterBoot" section of the flash.
This section is subdivided in several segments, as they are on ar71xx
RB devices, albeit with different offsets an
On 30/07/18 17:37, Thibaut VARÈNE wrote:
QCA9533 built-in switch can be configured
is this a backport ? if so, please reference the master commit hash.
John
Tested-by: Thibaut VARÈNE
Signed-off-by: Thibaut VARÈNE
---
target/linux/ar71xx/base-files/etc/board.d/02_network | 4 ++--
1
Hi,
comments inline
On 29/06/2014 10:13, Sergey Korolew wrote:
> Hello !
>
> Bosch Sensortec is one of most popular pressure sensors for
> building home weather stations, its cheap and easy to use. I
> decided to add two packages for each bus type because device
> usually have only one barometer
On 28/06/2014 15:49, Alpha Sparc wrote:
> I notice that support for lantiq mips34kc is also rather flaky,
> router somethings hangs and reboots abruptly... Is it possible to
> port the 34kc patches from TP-Link TD-W8970 SDK to OpenWRT? Is
> there a licensing issue. They have neatly place all t
On 29/06/2014 12:38, Jonas Gorski wrote:
> On Sun, Jun 29, 2014 at 8:58 AM, John Crispin
> wrote:
>> Hi,
>>
>> blogic@debian:/openwrt/ubox$ git am 5748 Applying: validate: fix
>> indentation blogic@debian:/openwrt/ubox$ git am 5749 Applying:
>> validate: fix
Hi,
patchwork seems to not have picked up this patch.
http://patchwork.openwrt.org/project/openwrt/list/
i can only see the previous version
John
On 29/06/2014 20:11, Sergey Korolew wrote:
> Hello !
>
> Here is the v2 of the patch, with suggestions from John Crispin.
On 30/06/2014 12:00, Jonas Gorski wrote:
> On Mon, Jun 30, 2014 at 10:01 AM, John Crispin
> wrote:
>> Hi,
>>
>> patchwork seems to not have picked up this patch.
>>
>> http://patchwork.openwrt.org/project/openwrt/list/
>>
>> i can only see th
On 30/06/2014 12:07, Marco Antonio Mauro wrote:
> On Wed, Apr 23, 2014 at 8:10 PM, John Crispin
> wrote:
>> looking at the patch, this was not the tool that depended on
>> some compression lib.
>>
>> i will have a look in the morning to figure out why
On 30/06/2014 12:32, Marco Antonio Mauro wrote:
> On Mon, Jun 30, 2014 at 12:12 PM, John Crispin
> wrote:
>> a74c1bb5ca2cf9156ac8cf1d3a91cc6759c4d7ad
>
> I missed that, I'm sorry! Thanks again!
>
>
:) you got
Hi,
please resend with the patches inline, it is not possible to comment
when they are attached.
also, my first impression is that the patches are really messy and the
commit text only partially matches what is inside the patches.
1/4 seems to have a pile of unrelated white space fixes.
1/4 add
Hi,
i would prefer it to be all in 1 patch with no unrelated whitespace
fixes. that makes it less work to merge and its self contained. if
there was more code then splitting it up might make sense, however its
only a few lines that get patched
ok, so it is the same uC as on the UBER ... i saw a
On 30/06/2014 13:40, Ben Mulvihill wrote:
> Hello Daniel and John,
>
> Could you have a look at this patch, and let me know if this is the
> best approach? I have defined new make targets for lantiq called
> Image/BuildNAND/squashfs and Image/BuildNAND/ubifs, making use of
> the UbinizeImage mac
at 3:34 PM, Jonas Gorski
> wrote:
>> On Mon, Jun 30, 2014 at 2:26 PM, John Crispin
>> wrote:
>>> Hi,
>>>
>>> i would prefer it to be all in 1 patch with no unrelated
>>> whitespace fixes. that makes it less work to merge and its self
>>&g
On 30/06/2014 18:50, Roman Yeryomin wrote:
> So... I've tried the old tree with suggested fix and ended up
> rebasing my patches to trunk, adding all the fixes and cleaning
> them up. Attaching the patches for now. John, Helmut, what do you
> think, can we apply them to the trunk (I will send the
>> i think this is the same is inside the 5390 pci chip ? i have one
>> of those, will verify tomorrow.
>
> Would be good!
>
we will figure it out, otherwise we ask the rt2x00 people for help
>> please tell me which patches to test/merge .. this is really
>> good news, thanks a lot to everyon
grade work.
the homehub should work the same way i believe
https://dev.openwrt.org/changeset/41131/
>
> On Mon, 2014-06-30 at 14:43 +0200, John Crispin wrote:
>>
>> On 30/06/2014 13:40, Ben Mulvihill wrote:
>>> Hello Daniel and John,
>>>
>>> Coul
i renamed the api after r41131, so make sure to use the correct one.
https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/base-files/lib/upgrade/platform.sh?rev=41222#L308
On 30/06/2014 20:40, John Crispin wrote:
>
>
> On 30/06/2014 20:32, Ben Mulvihill wrote:
>> Great
NAK, xway is a unified kernel target and we wont change that upstream.
i am fine with the cpu override bit but i wont take the KConfig part,
sorry,
John
On 01/07/2014 02:37, José Vázquez Fernández wrote:
> This draft adds cpu-feature-overrides.h using the FALCON one as
> base. Due to th
uffalo whr-300hp2.
>
> Thanks in advance.
>
> Kazuki Shimada
>
>
> (2014/07/01 2:36), Roman Yeryomin wrote:
>> On 30 June 2014 20:30, John Crispin wrote:
>>>
>>>>> i think this is the same is inside the 5390 pci chip ? i
>>>>> have o
Hi,
comments inline
>
> From c01a10928d2f27f89ff712896c948f549827acbe Mon Sep 17 00:00:00
> 2001 From: Drasko DRASKOVIC Date: Sun,
> 9 Feb 2014 03:46:43 +0100 Subject: [PATCH 1/2] weio: adding WeIO
> profile for OpenWrt
>
> More changes on WeIO profile
>
> Corrected board name detection in /t
Hi,
please make a patch that will default vid == vlan nr. this way we have
a sane default hat user can override with higher vid if needed.
Thanks
John
On 01/07/2014 08:57, Xiongfei(Alex) GUO wrote:
> hi, Roman,
>
> simply try these commands in OpenWrt, then the ethernet will start
> to
On 30/06/2014 19:34, Roman Yeryomin wrote:
> This adds support for mt7620 SoC. Tested with Asus RT-N14U only.
>
> Thanks to everybody who participated in this effort. Epecially Miko
> Hissa and Сергей Василюгин.
>
>
> Roman Yeryomin (4): [mac80211] add support for mt7620 [mac80211]
> enable dr
x c5d6623..6eb624f 100644
> ---
> a/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
>
>
+++
b/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
> @@ -2814,7 +2814,7 @@ Signed-off-by: John Crispin
> +#endif --- /
ah , i rejected the wrong one in patchwork, will fix it up in a sec
thanks for reporting this
On 01/07/2014 13:40, José Vázquez wrote:
> 2014-06-30 21:46 GMT+02:00, José Vázquez Fernández
> :
>> Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget.
>>
>> These drivers are not needed for
Hi,
2 comments inline
On 01/07/2014 13:44, Jon Suphammer wrote:
> Signed-off-by: Jon Suphammer ---
> target/linux/ar71xx/base-files/etc/diag.sh | 3 +
> .../ar71xx/base-files/etc/uci-defaults/02_network | 14 ++
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../a
On 01/07/2014 13:40, José Vázquez wrote:
> 2014-06-30 21:46 GMT+02:00, José Vázquez Fernández
> :
>> Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget.
>>
>> These drivers are not needed for ASE, Danube and AR9. As side
>> effect PHY11G and PHY22F firmwares are not included in the ker
On 01/07/2014 16:11, Roman Yeryomin wrote:
> On 1 July 2014 13:57, John Crispin wrote:
>>> Great,
>>>
>>> Roman can you test / confirm that this fixes the problem on
>>> rt-n14 ? i don't have that unit myself so i cannot test.
> Yes, it fix
Thanks, applied in r41452
John
On 01/07/2014 20:15, Cezary Jackiewicz wrote:
> After r41444 wifi working on WRTnode. Tested.
>
> Signed-off-by: Cezary Jackiewicz
> ---
>
> Index: target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
> ==
o it in the morning. which
ever you prefer :)
>
> On Mon, 2014-06-30 at 20:44 +0200, John Crispin wrote:
>> i renamed the api after r41131, so make sure to use the correct
>> one.
>>
>> https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/base-files/lib/upgrade/pla
On 02/07/2014 08:33, Ben Mulvihill wrote:
> On Tue, 2014-07-01 at 22:17 +0200, John Crispin wrote:
>>
>> On 01/07/2014 22:12, Ben Mulvihill wrote:
>>> Hello again,
>>>
>>> I have just tried sysupgradeNAND on the BTHOMEHUBV2B, and it
>>> fails
On 02/07/2014 16:46, michael lee wrote:
> From: michael
>
> Signed-off-by: michael
Thanks, applied in r41475 and r41476
John
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/
On 02/07/2014 08:37, Ben Mulvihill wrote:
> New make target in lantiq to use UbinizeImage and SysupgradeNand.
> Only enabled for BTHOMEHUBV2B for the moment but should be useable
> for other lantiq nand boards.
>
> Signed-off-by: Ben Mulvihill ---
Thanks, applied in r41474 .. and i pushed th
applied in r41505
On 04/07/2014 00:24, Roman Yeryomin wrote:
> On 16 April 2014 11:17, Bastian Bittorf
> wrote:
>> * Roman Yeryomin [16.04.2014 09:34]:
>>> Also pci seems to be broken as neither miniPCI slots nor VIA
>>> ethernet ports are not working:
>
> I've tested this and it works fine:
>
i stopped bb-builder2 and pointed it at AA instead of BB. i will
update strongswan, openssl and gnutls during the day.
sorry for the delay, the old AA builders HDD died half way through the
build 2 weeks ago and i was busy with BB and simply forgot.
sorry for the delay
On 06/07/2014 17:41, Noe
On 09/07/2014 08:42, Ben Mulvihill wrote:
> Hello Daniel,
>
> I have got SysupgradeNAND working on the BTHOMEHUBV2B with an
> all-ubifs rootfs, with a patch which I'll submit in another email,
> once I've recompiled with the latest trunk and made sure that
> everything is working, but in the
not grow. Perhaps rootfs_data should always be
> recreated in the update process. If interested I could also supply
> a patch.
>
please send a patch
John
> Kind regards,
>
> André
>
>
> On 09.07.2014 09:02, John Crispin wrote:
>>
>>
>>
libopenssl/strongswan - AA binary feed update
libopenssl was updated from 1.0.1g to 1.0.1h.
strongswan was updated from 5.0.0 to 5.1.3.
We updated the AA binary release. The Packages index was also updated.
If you use openssl or strongswan on your unit you need to run :
# opkg update
# opkg upgr
On 10/07/2014 08:27, Ben Mulvihill wrote:
> On Wed, 2014-07-09 at 16:27 +0200, Daniel Golle wrote:
>> On Wed, Jul 09, 2014 at 04:10:52PM +0200, Ben Mulvihill wrote:
JFFS2 works on bare MTD devices (originally NOR only, hackish
NAND support exists in the wild though YAFFS2 is more
c
Hi,
i just checked the BB builder and the rpi images get built there.
are you testing on HEAD ?
John
On 10/07/2014 17:10, smile...@gmail.com wrote:
> After compression of the rootfs, there is a failure.
>
>
>
>
>
> ... mcopy -i
> /home/smilebef/Downloads/OpenWRT/openwrt/build_dir/t
Hi,
On 08/07/2014 20:29, Fredrik Jonson wrote:
> +++
> b/target/linux/ar71xx/patches-3.10/714-MIPS-auth79-add-TL-WA830REv2-support.patch
s/auth79/ath79/g :)
John
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openw
On 11/07/2014 08:12, Rafał Miłecki wrote:
> 1) Please enter https://dev.openwrt.org/query 2) Click "Update"
> button
>
> This will results in:
>> Error: Bad Request Missing or invalid form token. Do you have
>> cookies enabled?
>
> Could someone take a look at this, please?
>
works for me, D
Hi,
we use factory and not devdata to store the eep data. the script needs
to be changed and not the dts file i think.
> - factory: partition@3 { -
> label = "factory"; +
> devdata: partition@3 { +
Hi,
On 10/07/2014 22:17, Cezary Jackiewicz wrote:
> Index:
> target/linux/ar71xx/patches-3.10/700-MIPS-ath79-add-TL-WA801NDv2-suport.patch
700
>
already exists. please also verify the other patch names and then
resend the patch
John
___
openw
Hi,
had to look up if i missed the newest trend but i did not ... :)
https://www.kernel.org/doc/Documentation/SubmittingPatches
The sign-off is a simple line at the end of the explanation for the
patch, which certifies that you wrote it or otherwise have the right to
pass it on as an open-sourc
Hi,
can you use brcm2708: int he subject next time ?
git am strips [foo] from the subject
John
On 04/07/2014 14:29, Álvaro Fernández Rojas wrote:
> By using uci-defaults force_link is enabled, which fixes some link
> issues if ethernet cable isn't connected when LAN is initialized.
>
On 12/07/2014 11:20, Fredrik Jonson wrote:
> Hello,
>
> I'm sorry John, I do not understand what you mean, with your
> comment.
>
> /Fjonson ___
> openwrt-devel mailing list openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman
hi,
>
> Index: target/linux/ar71xx/base-files/etc/diag.sh
> ===
>
>
--- target/linux/ar71xx/base-files/etc/diag.sh (revision 41592)
> +++ target/linux/ar71xx/base-files/etc/diag.sh(working copy)
this is also wrong. should
On 13/07/2014 10:17, Cezary Jackiewicz wrote:
> +++
> b/target/linux/ar71xx/patches-3.10/715-MIPS-ath79-add-TL-WA860RE-support.patch
when
>
i saw your V3 i thought ... darn its needs to be 715 after the
merge i did earlier :)
Thanks, applied in r41598
_
On 13/07/2014 12:39, Jonas Gorski wrote:
> On Sun, Jul 13, 2014 at 9:12 AM, John Crispin
> wrote:
>> hi,
>>
>>>
>>> Index: target/linux/ar71xx/base-files/etc/diag.sh
>>> ===
>>&
The OpenWrt developers are proud to announce the first release
candidate of OpenWrt Barrier Breaker.
___ __
| |.-.-.-.| | | |..| |_
| - || _ | -__| || | | || _|| _|
|___|| __|_|__|__||||__|
On 14/07/2014 12:59, Xiongfei Guo wrote:
> Hi, john,
>
> How is the luci, which version the luci will be used. Teh devel? or
> luci will bump to 0.12?
>
> Xiongfei Guo Credo Semi.
>
> On 07/14/2014 05:12 PM, John Crispin wrote:
>> The OpenWrt developers are proud
On 14/07/2014 13:13, Yousong Zhou wrote:
> On 14 July 2014 17:12, John Crispin wrote:
>>
>> The OpenWrt developers are proud to announce the first release
>> candidate of Op
On 14/07/2014 15:56, Alive4Ever wrote:
> On Monday, July 14, 2014 12:00:01 PM
> openwrt-devel-requ...@lists.openwrt.org wrote:
>> The OpenWrt developers are proud to announce the first release
>> candidate of OpenWrt Barrier Breaker.
> Glad to know that Barrier Breaker will be ready to rock. Wou
ok, no idea why it is not in trunk but marked as accepted but i would
assume its my fault
thanks, merged in r41653
On 14/07/2014 18:55, Claudio Leite wrote:
> Hello,
>
> * Claudio Leite (lei...@staticky.com) wrote:
>> Use pr_debug rather than pr_info since it is only relevant for
>> debugging
On 14/07/2014 19:05, Sergey Ryazanov wrote:
> John, please, could you reject this series? I will send new one.
i just marked it as "Changes Requested"
John
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.o
Hi,
lovely, works for me on the 6 boards that i tested. will merge it in a
sec.
i will look into the fixme bits.
John
On 14/07/2014 23:13, Roman Yeryomin wrote:
> Move eeprom extraction from scripts to dts files. Additionally
> there are few other changes like: - whitespace fixes - add
On 16/07/2014 00:07, Hauke Mehrtens wrote:
> On 07/15/2014 07:06 PM, Bruno Randolf wrote:
>>> Another problem I noted when upgrading from AA to BB on MTX-1:
>>>
>>> # sysupgrade -n
>>> /tmp/openwrt-au1000-au1500-jffs2-128k-sysupgrade.bin tar:
>>> openwrt-au1000-au1500-jffs2-128k.fs: not found in
On 17/07/2014 12:53, Roman Yeryomin wrote:
> On 15 July 2014 19:40, John Crispin wrote:
>> Hi,
>>
>> lovely, works for me on the 6 boards that i tested. will merge it
>> in a sec.
>>
>> i will look into the fixme bits.
>>
>
> So, if nothing
On 17/07/2014 10:55, Bruno Randolf wrote:
> I volunteer to maintain au1000. The only devices I have are MTX-1
> though, but I believe there are not many other au1000 boards out in
> the wild anyways.
>
good
> I don't know how to fix the sysupgrade issue. Basically the name
> used in AA was wr
blem since the wndr3700v4 board_detection is identified as
> wndr4300 thus the sysupgrade works for 4300 but not for 3700v4.
>
> Regards, -paul
>
> On Tue, 2014-06-24 at 23:15 +0200, John Crispin wrote:
>>
>> On 24/06/2014 22:43, Paul Blazejowski wrote:
>>> i get &qu
Hi,
this patch is line broken.
what is the difference between this and the previous ?
John
On 19/07/2014 06:11, L. D. Pinney wrote:
>
> From: L. D. Pinney
>
> This patch adds support for the Kingston Mobilelite Wireless
> (MLW-221)
>
> http://wiki.openwrt.org/toh/kingston/mlw221
>
technically correct. however there is a dependency bug left over from
some cargo cult cleanups. this causes the image builder to not build
when ramdisk is enabled. i plan to clean this up post BB. i will
ignore this patch until said time.
John
On 19/07/2014 15:13, Ben Mulvihill wrote:
> T
g with some installation
> instructions, which at the moment are lacking!)
>
> Ben
>
> On Sun, 2014-07-20 at 08:54 +0200, John Crispin wrote:
>> technically correct. however there is a dependency bug left over
>> from some cargo cult cleanups. this causes the image builder t
essary downloads would be in one place on the official
> openwrt site.
>
> Thank you,
>
> Ben
>
> On Sun, 2014-07-20 at 11:12 +0200, John Crispin wrote:
>> i can build a ramdisk for the board for the reelase if it is
>> needed to install. we do the same for the mi
Hi Bruno
i will merge a patch post the rc2 fork that will generate old and new
images int he release branch while not doing so in the dev trunk. i
really dont want any workarounds in trunk
how about that ?
John
On 21/07/2014 15:20, Bruno Randolf wrote:
> On 07/21/2014 12:28 PM, Bruno Ra
On 21/07/2014 19:27, Bruno Randolf wrote:
> On 07/21/2014 02:22 PM, John Crispin wrote:
>>> i will merge a patch post the rc2 fork that will generate old
>>> and new images int he release branch while not doing so in the
>>> dev trunk. i really dont want any wor
? i strongly believe that the hard-coded
>> wndr4300 string somewhere in the source is the culprit of the
>> problem since the wndr3700v4 board_detection is identified as
>> wndr4300 thus the sysupgrade works for 4300 but not for 3700v4.
>>
>> Regards, -paul
>&g
Hi,
this patch has $windos style new lines. git am refuses to merge it.
i will mark the other patches you sent as rejected aswell.
please take a few hours to learn git am / git send-email.
John
On 23/07/2014 03:27, L. D. Pinney wrote:
> From: L. D. Pinney
>
> This patch sets the US
Hi,
i assume the patches was sent various times by accident ?
i could not find a difference between the various versions so i am
going to merge the last one i got. if this is wrong then please do let
me know.
John
On 23/07/2014 09:00, Yousong Zhou wrote:
>
> Signed-off-by: Yousong Zhou
901 - 1000 of 2219 matches
Mail list logo
