On 14/07/2015 16:38, Rafał Miłecki wrote:
> On 14 July 2015 at 16:05, Günther Kelleter
> wrote:
>> This patch set is a backport of svn commits 46338..46342 from trunk to CC.
>> It adds support for devolo devices:
>> dLAN pro 500 Wireless+
>> dLAN pro 1200+ WiFi ac
>
> There is a nice 1-line sc
On 14/07/2015 17:05, Bruno Randolf wrote:
> On 07/14/2015 03:34 PM, John Crispin wrote:
>>
>>
>> On 14/07/2015 14:41, Bruno Randolf wrote:
>>> On 07/14/2015 12:43 PM, Jernej Izak wrote:
>>>> ifneq (y,)
>>>>
>>>> bash: -c: line 0:
On 14/07/2015 17:18, Bruno Randolf wrote:
> On 07/14/2015 04:07 PM, John Crispin wrote:
>> its not about blaming but about figuring out what went wrong.
>
> Right, same here :)
>
>> i will be
>> on the laptop that i used for merging in abotu an hour and will see i
On 14/07/2015 20:00, Karl Palsson wrote:
> We're adding support for gpio irqs to all of ar71xx this late in the CC
> release?
i was not planning on merging the irq patch
> No possible side affects here?
see above
> Are the gpio irqs required
> for these platforms?
no
> What makes these t
How did you call menuconfig ... using "make kernel_menuconfig
CONFIG_TARGET=subtarget" ?
On 14/07/2015 20:33, Álvaro Fernández Rojas wrote:
> With the previous setup if you called kernel_menuconfig it resulted in
> totally breaking the target config for both subtargets.
>
> El 14/07/2015 a las 2
On 14/07/2015 20:15, Álvaro Fernández Rojas wrote:
> Device tree exports board name/model and device LEDs.
>
this patch makes no sense to me and removes functionality. DT does not
provide this functionality at all.
John
> Signed-off-by: Álvaro Fernández Rojas
> ---
> .../brcm2708/b
On 14/07/2015 20:15, Álvaro Fernández Rojas wrote:
> Device tree exports board name/model and device LEDs.
>
this patch makes no sense to me and removes functionality. DT does not
provide this functionality at all.
John
> Signed-off-by: Álvaro Fernández Rojas
> ---
> .../brcm2708/b
On 14/07/2015 20:15, Álvaro Fernández Rojas wrote:
> - Add upstream (bcm2835) modules and improve downstream ones (bcm2708)
> - Override disabled device tree module status from config.txt
>
> Signed-off-by: Álvaro Fernández Rojas
> ---
> target/linux/brcm2708/image/config.txt | 6 +++
> targe
although this is not common practice i find the default way of handling
config files sub optimal and error prone. this is why i do what you
proposed for ramips already. lets see if anyone else complains otherise
i am fine with this change
On 14/07/2015 20:15, Álvaro Fernández Rojas wrote:
> Sign
On 15/07/2015 09:21, Guenther Kelleter wrote:
>
>> -Original Message-
>> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On
>> Behalf
>> Of John Crispin
>> Sent: Tuesday, July 14, 2015 8:47 PM
>> To: openwrt-devel@lists.ope
erent matter to resolve.
> El 15/7/2015, a las 7:31, John Crispin <mailto:blo...@openwrt.org>> escribió:
>
>>
>>
>> On 14/07/2015 20:15, Álvaro Fernández Rojas wrote:
>>> Device tree exports board name/model and device LEDs.
>>>
>>
On 15/07/2015 12:23, Jonas Gorski wrote:
> On Wed, Jul 15, 2015 at 7:59 AM, Rafał Miłecki wrote:
>> On 15 July 2015 at 07:05, Cezary Jackiewicz
>> wrote:
>>> @@ -6,6 +6,25 @@
>>> model = "Huawei EchoLife HG553";
>>> compatible = "huawei,hg553", "brcm,bcm6358";
>>>
>>> + g
On 15/07/2015 19:41, Matti Laakso wrote:
>> Hi,
>>
>> how is the testing going ? i would like to also pull this intot he CC
>> which means there is not that much time left.
>>
>> also the patch sent was missing proper subject and SoB.
>>
>> John
>
> Hi John,
>
> Sorry about the delay, it s
On 16/07/2015 18:31, Daniel Golle wrote:
> On Thu, Jul 16, 2015 at 04:39:58PM +0200, Steven Barth wrote:
>> The OpenWrt developers are proud to announce the third release candidate of
>> OpenWrt Chaos Calmer.
>> ...
>> ** Improvements since RC 2 **
>> * brcmfmac: support for BCM43602
>> * mt76:
On 16/07/2015 18:59, Arturo Rinaldi wrote:
> please give me the exact *git commit HASH* of 15.05-rc3. I need to make
> my own snapshot based on that.
>
> Kind Regards, Arturo
>
171f0fd10830acd3259f7c229f1b65b95595f388
___
openwrt-devel mailing li
On 17/07/2015 14:31, Christian Beier wrote:
>
> Hi there,
>
> I see that an image for the EnGenius EPG5000 is generated for snapshots
> (https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/openwrt-ar71xx-generic-epg5000-squashfs-sysupgrade.bin),
> but there's none for rc-3. Are there c
On 20/07/2015 22:38, Felix Fietkau wrote:
> On 2015-07-20 18:49, Maciej Soltysiak wrote:
>> Hi guys,
>>
>> Would s/rc2/rc3/ on the opkg.conf lead to a clean upgrade or is it
>> better to reflash?
> Upgrading via opkg doesn't work. You need to reflash.
>
> - Felix
> __
On 21/07/2015 01:59, Bill wrote:
> Folks-
>
> I would REALLY like to see ticket 19085
> (https://dev.openwrt.org/ticket/19085) fixed before we finalize CC. It
> is a showstopper for a piece of popular hardware I use frequently.
>
> I haven't seen any progress reports on it in a couple of weeks,
On 20/07/2015 22:19, Daniel Petre wrote:
> Hey guys,
> i am wondering why are the nexx wt3020 images being built for CC if they are
> broken?
>
> https://downloads.openwrt.org/chaos_calmer/15.05-rc3/ramips/mt7620/
>
> Also can the maintainer of the nexx wt3020 patchset take a look at the issue
On 21/07/2015 07:24, John Crispin wrote:
>
>
> On 20/07/2015 22:19, Daniel Petre wrote:
>> Hey guys,
>> i am wondering why are the nexx wt3020 images being built for CC if they are
>> broken?
>>
>> https://downloads.openwrt.org/chaos_calmer/15.0
On 15/07/2015 19:57, John Crispin wrote:
>
>
> On 15/07/2015 19:41, Matti Laakso wrote:
>>> Hi,
>>>
>>> how is the testing going ? i would like to also pull this intot he CC
>>> which means there is not that much time left.
>>>
>
On 20/07/2015 19:45, Lawrence D'Anna wrote:
>
>>
>> What prereq can be forced that makes force even a worthwhile option? If
>> it works anyway, why not just drop the prereq check? If it still won't
>> work, what's the point in allowing a force?
>>
>
> In my case it was because the prereq chec
On 17/07/2015 19:18, Bruno Randolf wrote:
> diff --git a/target/linux/brcm2708/Makefile b/target/linux/brcm2708/Makefile
> index 30f6e1d..37ff204 100644
> --- a/target/linux/brcm2708/Makefile
> +++ b/target/linux/brcm2708/Makefile
> @@ -19,7 +19,8 @@ SUBTARGETS:=bcm2708 bcm2709
> KERNEL_PATCHVER
On 16/07/2015 22:20, Matthias Schiffer wrote:
> -BOARDS:= \
> - sun4i-a10-cubieboard \
> - sun4i-a10-olinuxino-lime \
> - sun4i-a10-pcduino \
> - sun5i-a13-olinuxino \
> - sun6i-a31-colombus \
> - sun6i-a31-m9 \
> - sun7i-a20-bananapi \
> - sun7i-a20-bananapro \
>
Hi,
fails to apply after other backport. please rebase and resend once i
pushed my tree
John
On 22/07/2015 13:37, L. D. Pinney wrote:
> This patch adds support for the Onion Omega.
>
> https://onion.io/omega
>
> Signed-off-by: L. D. Pinney
> Acked-by: Boken Lin
> Tested-by: Jacky Hua
Hi,
patch fails to apply to my tree in combination with other backports.
please rebase and resend once i pushed my tree
On 15/07/2015 11:04, Jaehoon You wrote:
> backport of r46248.
>
> Signed-off-by: Jaehoon You
> ---
> target/linux/ar71xx/base-files/etc/diag.sh | 1 +
> .../ar71xx
On 24/07/2015 11:19, Matti Laakso wrote:
> The fix will be in 4.2, so we still need the patch for 4.1.
can you prepare a patch and send it over ?
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailma
On 24/07/2015 11:24, Bruno Randolf wrote:
> On 07/24/2015 08:12 AM, John Crispin wrote:
>> On 17/07/2015 19:18, Bruno Randolf wrote:
>>> diff --git a/target/linux/brcm2708/Makefile b/target/linux/brcm2708/Makefile
>>> index 30f6e1d..37ff204 100644
>>>
On 24/07/2015 12:17, John kerry wrote:
> Hi,
>
> There is one issue, normally whenever i open GUI its ask for user name
> and password, again close the browser and open GUI it ask for UN and
> Password, but there is problem when i do factory reset it stop asking UN
> and Password for GUI anymore
On 25/07/2015 14:46, Matthias Schiffer wrote:
> Hi,
> I'd like to propose to split the current "base" opkg repo into two, one
> for userspace applications and one for kernel modules. This would
> greatly simplify providing your own kernel module repository with
> modules for a customized kernel,
Hi
your patches cause a build failure on the mikrotik subtarget
please send a fix asap
LD init/built-in.o
arch/mips/built-in.o: In function `epg5000_get_mac':
/home/buildbot/slave-local/ar71xx_mikrotik/build/build_dir/target-mips_34kc_uClibc-0.9.33.2/linux-ar71xx_mikrotik/linux-3.18.18/ar
On 25/07/2015 16:34, John Crispin wrote:
> Hi
>
> your patches cause a build failure on the mikrotik subtarget
>
> please send a fix asap
>
> LD init/built-in.o
> arch/mips/built-in.o: In function `epg5000_get_mac':
> /home/buildbot/slave-local/ar71xx
ralink,function = "nand";
> + ralink,function = "nand2";
> };
> };
> sdhci_pins: sdhci {
> diff --git
> a/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patc
On 26/07/2015 18:24, Piotr Dymacz wrote:
> The following changes fix different mistakes in ramips target and
> try to make the code more clean and consistent.
>
> The patches affect:
> * dts{,i} files
> * base-files/* scripts
> * image Makefile
>
> Piotr Dymacz (13):
> ramips: fix indentat
On 31/07/2015 11:23, Sven Eckelmann wrote:
> On Friday 31 July 2015 10:33:59 John Crispin wrote:
> [...]
>>> What about the other problems like wrong settings width, wrong settings
>>> position and missing settings? Should I resend them?
>>
>> which patch exa
On 15/08/2015 16:37, Hauke Mehrtens wrote:
> On 08/09/2015 05:50 AM, Daniel Dickinson wrote:
>> On RedHat/Fedora and derivatives we must use the system liblzma
>> from xz-devel because the liblzma in tools/xz breaks these
>> systems due to system tools (which use liblzma) having
>> missing symbol
Hi,
the series is in patchwork several times. some mails are duplicated 8
times. others exist twice, have identical content but 2 different
subjects. i marked all 25 patches as invalid. can you please work out
what we should merge and just resend it as a clean series against trunk
please.
Hi,
just merged the whole lot. thanks a lot. what do you want to do next
lantiq or ar71xx ? :) personally i would prefer ar71xx ;)
John
On 05/08/2015 20:30, Piotr Dymacz wrote:
> The following changes fix different mistakes in ramips target and try to make
> the code more clean and cons
Hi,
I have various issues with this patch
On 31/07/2015 10:53, Dmitry Ivanov wrote:
> Do not wait for scan results if scan request failed.
>
> Signed-off-by: Dmitry Ivanov
> ---
> iwinfo_nl80211.c | 14 ++
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/iwinfo_
On 10/08/2015 17:16, YuheiOKAWA wrote:
> This patch add support for Planex DB-WRT01. DANBOARD route on
> the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
> DANBOARD is Cartoon character.
>
> Signed-off-by: YuheiOKAWA
Hi,
i merged a huge 25 patch series today that clean
Hi,
On 16/08/2015 13:08, Sergiy Kibrik wrote:
> Race is possible in ulog_kmsg: if no /dev/kmsg exists
> (e.g. while /dev gets re-mounted) regular file created instead.
> From this point system goes without kernel logger:
> special character file can't be created anymore, all clients keep
> overwri
Hi Tobias,
Thanks for the patch. unfortunately its line mangled and white space
broken. also it seems you sent a HTML email. If you take a few minutes
to setup git, you can use "git send-email" to avoid these issues.
John
On 15/08/2015 10:08, Tobias Welz wrote:
> Hello OpenWrt Developer
On 17/08/2015 22:37, Sergiy Kibrik wrote:
> hi John,
>
>> the patch is quite invasive. how about just using "r+"
>>
>> from the man page --> "r+ Open for reading and writing. The stream
>> is positioned at the beginning of the file."
>>
>> could you try the following and not apply any othe
Hi,
On 15/08/2015 23:38, Mathias Kresin wrote:
> Am 24.07.2015 um 01:20 schrieb Martin Blumenstingl:
>> On Fri, Jul 24, 2015 at 1:00 AM, Aleksander Wałęski
>> wrote:
>>> Actually, it just dawned on me that they can be doing just that. In
>>> the bootloader. This is the only part of firmware we ar
On 17/08/2015 23:25, Karl Palsson wrote:
> Personally I'd like to see Gainstrong mentioned _somewhere_ in the patch
> itself.
>
>> +--- a/arch/mips/ath79/machtypes.h
>> b/arch/mips/ath79/machtypes.h
>> +@@ -74,6 +74,7 @@ enum ath79_mach_type {
>> +ATH79_MACH_JA76PF2, /* jjPl
On 18/08/2015 12:21, Karl Palsson wrote:
> John Crispin wrote:
>
>
>> On 17/08/2015 23:25, Karl Palsson wrote:
>>> Personally I'd like to see Gainstrong mentioned _somewhere_ in the patch
>>> itself.
>>>
>>>> +--- a/arch/mip
> In fact, I have tested my patch with both AP scan turned on and off.
fair enough, will have a closer look later, thanks
> On Mon, Aug 17, 2015 at 1:18 PM, John Crispin wrote:
>> Hi,
>>
>> I have various issues with this patch
>>
>> On 31/07/2015 10:53, Dm
Hi Mathew,
patch content is fine however the patch is generated against the wrong
basee. please use git to respin the patch and resend it.
John
On 21/08/2015 03:19, Matthew Reeve wrote:
> This patch adds kernel and userspace support for the Ubiquiti Networks
> airGateway Pro.
>
> Sign
Hi,
Patch looks fine now, however the subject is missing the "ar71xx:" prefix
John
On 18/08/2015 21:44, Stijn Segers wrote:
> This patch adds Gainstrong Minibox v1.0 into trunk. I have addressed the
> following issues:
> - all caps prefix
> - added vendor
>
> I have built images and ask
On 21/08/2015 11:49, Jonas Gorski wrote:
> On Fri, Aug 21, 2015 at 3:34 AM, Mathieu Olivari
> wrote:
>> This new build target can be used to generate a ubinized.bin file,
>> including the kernel and the FS specified as an argument.
>>
>> Signed-off-by: Mathieu Olivari
>
> I have a slightly di
On 21/08/2015 13:17, Jonas Gorski wrote:
> The stock QSDK expects the ubi to be wrapped in an itb image, so
> provide one for easy sysupgrade from QSDK.
>
> FIXME: currently does not work? Seems to flash fine, but ubi cannot
> be mounted by OpenWrt and needs to be flashed a second time.
how do
On 21/08/2015 13:28, Jonas Gorski wrote:
> On 21.08.2015 13:24, John Crispin wrote:
>>
>>
>> On 21/08/2015 13:17, Jonas Gorski wrote:
>>> The stock QSDK expects the ubi to be wrapped in an itb image, so
>>> provide one for easy sysupgrade from QSDK.
>&g
On 26/08/2015 01:00, Etienne CHAMPETIER wrote:
> This patch series rework a bit ujail,
> and add capabilities support to it
nice
>
> Seccomp filter are very powerful but not totally generic,
> each arch can have different set of syscalls,
> each libc can use different syscall for the same func
; Run-tested for [yet out of the tree] Synopsys Designware ARC AXS101.
>
> Signed-off-by: Alexey Brodkin
> Cc: Waldemar Brodkorb
> Cc: Mathieu Olivari
> Cc: Felix Fietkau
> Cc: John Crispin
> ---
> toolchain/uClibc/Config.in | 4 +
&
On 27/08/2015 10:50, Dirk Neukirchen wrote:
> On 27.08.2015 09:27, Yousong Zhou wrote:
>> On 27 August 2015 at 12:02, Dirk Neukirchen wrote:
>>> - it causes issues with qemu versions < 2.2
>>> should fix issues with Ubuntu 14.03 LTS (qemu 2.0)
>>> errors are:
>>> Kernel panic - not syncing: Atte
On 27/08/2015 11:29, John Crispin wrote:
> hjaving ne eminent need for size reduction does not mean bloat is acceptable
typo tastic ... note to self: "dont send mails on the ipad when you have
a kid in one arm" ;)
___
openwrt-devel
On 26/08/2015 18:20, Etienne Champetier wrote:
>
>
> 2015-08-26 15:48 GMT+02:00 John Crispin <mailto:blo...@openwrt.org>>:
>
>
>
> On 26/08/2015 01:00, Etienne CHAMPETIER wrote:
> > This patch series rework a bit ujail,
> > and ad
On 27/08/2015 13:25, Etienne Champetier wrote:
>
>
> 2015-08-27 12:18 GMT+02:00 John Crispin <mailto:blo...@openwrt.org>>:
>
>
>
> On 26/08/2015 18:20, Etienne Champetier wrote:
> >
> >
> > 2015-08-26 15:48 GM
ecipe for target 'stamp-5mloop' failed
> make[7]: *** [stamp-5mloop] Error 1
> >8
>
> Prerequisites are:
> [1] http://patchwork.ozlabs.org/patch/510985 which adds uClibc-ng support.
> [2] http://patchwork.ozlabs.org/patch/502022 whic
Hi,
i just skimmed over the patch quickly and ...
On 27/08/2015 13:03, Alexey Brodkin wrote:
> diff --git a/target/linux/arc/axs10x/base-files/etc/config/network
> b/target/linux/arc/axs10x/base-files/etc/config/network
> new file mode 100644
> index 000..1d46510
> --- /dev/null
> +++ b/targ
On 27/08/2015 14:15, Alexey Brodkin wrote:
> Hi John,
>
> On Thu, 2015-08-27 at 13:59 +0200, John Crispin wrote:
>> Hi Alexey,
>>
>> have you already sent these patches upstream to the gcc people ?
>
> I'm not really sure which patches you're talking
On 28/08/2015 12:35, Anselm Eberhardt wrote:
> From: Anselm Eberhardt
>
> Remove src_port from firewall.config to receive dhcpv6 replies. Fixes #20295.
>
> Signed-off-by: Anselm Eberhardt
Hi,
the patch is whitespace broken i am afraid. please use git to send the
patch to avoid these issues
Hi,
have a look here please -->
http://git.openwrt.org/?p=project/ubus.git;a=tree;f=lua;
John
On 28/08/2015 21:09, Ronaldo Afonso wrote:
> Hi all,
>
> Can anyone provide me with an example of registering an ubus namespace
> using Lua?
>
> Thanks in advance.
>
> --
> Ronaldo Af
use block-mount that is what its there for.
On 29/08/2015 21:03, Alexandru Ardelean wrote:
> procd is for service handling mostly; so, start/stop/etc
> basically you'd need to have another service that does usb-device
> handling (of that device).
>
> what i'd do, is to write a hotplug script, add
On 09/09/2015 09:35, Bachtin, Dmitri wrote:
> Signed-off-by: Dmitri Bachtin
Hi,
it is always nice if a patch has a short description that goes beyond
the subject. in this case it would be nice if you could explain why you
need to build a static version of uqmi
John
> ---
> CMakeLists.
Hi,
i dont want to ruin the fun but this is not devel chat, but user level
support. please move it to the normal mailing list or the forum. this ML
is for openwrt developemnt related issues
John
On 10/09/2015 09:50, John kerry wrote:
> Where its applying the settings, except resetting
On 11/09/2015 07:18, Rafał Miłecki wrote:
> On 9 September 2015 at 17:24, Tobias Welz wrote:
>> BTW: Why does the trunk has to be "renamed". The trunk is always recent, so
>> it could also have a persistent name like "Bleeding Edge" (BTW: is this a
>> cocktail?) and it would be always clear, tha
On 11/09/2015 01:53, Carlos Ferreira wrote:
> I have a custom build for x86_64 where CONFIG_PROC_FS is active (y) at
> the kernel configuration. /etc/fstabs has nothing and is pointing into
> an empty /tmp directory.
>
> Is there any reason that might prevent the /proc from being mounted?
> Afte
On 11/09/2015 08:39, Rafał Miłecki wrote:
> On 11 September 2015 at 07:51, John Crispin wrote:
>> On 11/09/2015 07:18, Rafał Miłecki wrote:
>>> On 9 September 2015 at 17:24, Tobias Welz wrote:
>>>> BTW: Why does the trunk has to be "renamed". The trunk
On 11/09/2015 08:53, Etienne Champetier wrote:
>
>
> 2015-09-11 8:46 GMT+02:00 John Crispin <mailto:blo...@openwrt.org>>:
>
>
>
> On 11/09/2015 08:39, Rafał Miłecki wrote:
> > On 11 September 2015 at 07:51, John Crispin <mailto:blo...@openwrt
ah indeed, i missed the IB images. will add them during the weekend
On 11/09/2015 11:27, Daniel Golle wrote:
> Hi!
>
> I'm glad to see CC is finally out!
>
> However, it seems like images for some boards got missing at least on
> lantiq and oxnas.
> See:
> http://downloads.openwrt.org/chaos_calm
Hi,
before looking at this in detail, could please send a properly formatted
patch. the patch you sent is not using the unified option when
generating it. upstream linux-wireless wont accept it otherwise and we
wont either.
also please prefix the email with "mac80211: " so that we know which
subs
; The hardware target to where I'm building OpenWRT is a Supermicro
> A1SAi-2750F server board
> <http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2750F.cfm>.
>
> I will send in annex, the configuration files.
>
>
>
>
> On 1
On 14/09/2015 09:34, pupie wrote:
> Hello everyone,
> I am so glad that openwrt 15.05 has been release.
>
> I noticed that since AA release, openwrt team neither tag the source
> tree in subversion/git after an official release nor provide the
> revision/commit sha-1 along with release note.
> I
On 14/09/2015 13:35, Alexey Brodkin wrote:
> Hi Felix,
>
> On Fri, 2015-09-11 at 15:09 +0200, Felix Fietkau wrote:
>> On 2015-08-27 13:03, Alexey Brodkin wrote:
>>> This patch series adds support for the Synopsys DesignWare ARC architecture.
>>>
>>> DesignWare ARC700 is family of 32-bit CPUs dev
On 14/09/2015 19:28, Baptiste Clenet wrote:
> Hi,
>
> I'm using a MT7628 chip and I try to implement an I2C device which
> will use i2c-ralink adapter. I registered my i2c device with
> module_i2c_driver(i2c_device_driver);
>
> I can see it on my bus:
> ./sys/bus/i2c/drivers/i2c_device_driver
> B
On 14/09/2015 20:09, Daniel Golle wrote:
> On Mon, Sep 14, 2015 at 07:47:08PM +0200, John Crispin wrote:
>> On 14/09/2015 19:28, Baptiste Clenet wrote:
>>> Hi,
>>>
>>> I'm using a MT7628 chip and I try to implement an I2C device which
>>> will
On 02/09/2015 16:34, José Vázquez Fernández wrote:
> From a9d8a4d04c5564abb0440a3b67dd21e8645e2c43 Mon Sep 17 00:00:00 2001
> From: =?UTF-8?q?Jos=C3=A9=20V=C3=A1zquez=20Fern=C3=A1ndez?=
>
> Date: Tue, 1 Sep 2015 19:30:26 +0200
> Subject: [OpenWrt-Devel] [PATCH] [LANTIQ] ARV7519RW22 dts fix
>
>
you used the wrong prefix, i fixed it manually, please double check it
next time
John
On 13/09/2015 00:33, Lars Kruse wrote:
> The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
> following:
> * Ubiquiti Nanostation M XM: Pin 8
> * Ubiquiti Nanostation M XW: Pin 2
Hi,
On 09/09/2015 16:56, Weijie Gao wrote:
> Signed-off-by: Weijie Gao
this line should be the last line and not the first, i manually fixed
this during the merge
John
>
> This patch adds support for TP-LINK TL-WDR3320 v2.
>
> This router uses a chinese version 2 firmware header,.
>
On 15/09/2015 00:11, Etienne Champetier wrote:
>
> Just some random stuffs:
>
> -new in kernel 4.3: ambient capabilities (great explanation in the commits)
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=58319057b7847667f0c9585b9de0e8932b0fdb08
> http://git.kernel.or
Hi,
SoB is missing and
On 02/09/2015 02:14, Alexander Couzens wrote:
> similiar to import from uci cli.
> import removes all old configs and import the new config.
>
> example:
> ubus call uci import \
> '{"config": "dhcp", "values": { "srv": { ".type": "host", ".name": "srv",
> "mac":
On 31/08/2015 12:58, Attila Lendvai wrote:
> hi!
>
> resending this patch properly, including a signed-off entry.
>
> it would be nice if this could make its way into CC, because this
> fixes a regression.
>
> the obsolete copy is this: https://patchwork.ozlabs.org/patch/508527/
>
>
Hi,
th
On 28/08/2015 15:27, François Kooman wrote:
> Hi Mirko,
>
> To accompany my patch to the OpenVPN configuration module for luci [0]
> to support some extra fields here also the change to the OpenVPN init
> script.
>
> It adds the following fields:
>
> tls_version_min
> tls_version_max
> key_dir
On 15/09/2015 09:27, Rafał Miłecki wrote:
> On 15 September 2015 at 09:17, John kerry wrote:
>> Please can anyone reply
>
> Is someone here your paid support with 1h response time?
although i find this emails annoying and funny at the same time we can
probably assume that it is not him that th
On 15/09/2015 14:18, Rafał Miłecki wrote:
> We're in process of cleaning nand_do_platform_check. Currently is leaves
> a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
> path in nand_upgrade_stage1. This can be a bit confusing.
>
> The plan is to have the check function o
On 15/09/2015 20:32, Rüdiger, Christoph wrote:
> Hello,
>
> I'm quite new to OpenWrt and being faced with an existing build tree here.
> After reading nearly everything I could force Google to bubble it up to the
> top result pages, I'm still struggling with a simple question.
>
> Our build t
On 02/09/2015 12:08, Daniel Dickinson wrote:
> The following patch series adds support for three PowerCloud devices.
> The patches have been reworked from the previous bunged up iteration
> and have been tested on the actual devices which are currently in use.
>
> There is, however, one question
Hi
On 21/08/2015 09:27, Matthew Reeve wrote:
> This patch adds kernel and userspace support for the Ubiquiti Networks
> airGateway Pro.
>
> v2: Modify file bases so that git apply will apply it.
the change log should go below the tear line
> Signed-off-by: Matthew Reeve
>
which should be he
On 02/08/2015 09:58, Daniel Dickinson wrote:
> This patch may not actually be necessary, but adds the allnet
> uboot-envtools safety checks before allow a firmware upgrade to
> and Netgear WNDR3700/3800 device.
>
> Note that the Netgear devices already have a hardware id check so
> this may be s
/shm. If there is not enough room there, execution
>>>> terminates with SIGBUS upon access. Even a single instance would
>>>> exceed
>>>> 512K.
>>>>
>>>> On Tue, 2015-07-14 at 11:50 +0200, John Crispin wrote:
>>>>> what kind of us
On 31/07/2015 11:14, Sven Eckelmann wrote:
> The pinctrl-rt2880 code doesn't support multiple functions with the same
> name. This will result in a incorrect pinmux configuration.
>
> Signed-off-by: Sven Eckelmann
> ---
> This is the patch which John Crispin wante
On 01/09/2015 14:14, Yousong Zhou wrote:
> The issue was found and reported by hynman [1] when compiling reaver for
> ar71xx
> (Big Endian MIPS).
>
> {standard input}: Assembler messages:
> {standard input}:79: Error: unrecognized opcode `wsbh $2,$2'
> {standard input}:90: Error: un
Hi,
On 14/09/2015 10:38, Zoltan HERPAI wrote:
> musl fails to build when compiled with gcc on sh3 (GCC target/#67260).
> Work it around.
>
> Signed-off-by: Zoltan HERPAI
> ---
> toolchain/musl/common.mk |5 +
> 1 file changed, 5 insertions(+)
>
> diff --git a/toolchain/musl/common.mk b
On 30/08/2015 16:37, Hannu Nyman wrote:
> 'opkg list' command only displays the available packages' name, version
> and description.
> It would be useful to also see the approximate size of the available
> package.
>
> This patch extends "opkg list" command with "--size" to optionally show
> als
On 24/08/2015 17:25, Dirk Neukirchen wrote:
> Signed-off-by: Dirk Neukirchen
> ---
> v2 : split 6/7 into two commits
>
sorry we need a v3 please this one does not apply anymore. the actual
patch looks fine
John
> package/kernel/mac80211/Makefile | 82
> -
On 23/08/2015 13:00, Dirk Neukirchen wrote:
> follow upstream module rename
> commit 3c607d27c818cf4a5d28f2c73b18a88f8fbdfa33
>
> Signed-off-by: Dirk Neukirchen
this one does not apply either. can you resend all 3 in a new series please
John
> ---
> package/kernel/mac80211/Makefile
see inline ...
On 16/09/2015 10:09, Hannu Nyman wrote:
> 'opkg list' command only displays the available packages' name, version and
> description. It would be useful to also see the approximate size of the
> available package.
>
> This patch extends "opkg list" command with "--size" to optional
On 15/09/2015 22:01, Pushpal Sidhu wrote:
> This will allow a more robust download system, especially in cases when
> building an older release where a source checkout system is gone.
>
> Signed-off-by: Pushpal Sidhu
although this looks good at first glance we notice on a closer
inspection tha
On 16/09/2015 10:22, Hannu Nyman wrote:
> On 16.9.2015 11:18, John Crispin wrote:
>> see inline ...
>>
>> On 16/09/2015 10:09, Hannu Nyman wrote:
>>> Index: package/system/opkg/Makefile
>>> =
101 - 200 of 2219 matches
Mail list logo
