you used the wrong prefix, i fixed it manually, please double check it
next time
John
On 13/09/2015 00:33, Lars Kruse wrote:
> The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
> following:
> * Ubiquiti Nanostation M XM: Pin 8
> * Ubiquiti Nanostation M XW: Pin 2
>
> The previous definition of the pins was mixed up between XM and XW model.
>
> Signed-off-by: Lars Kruse <li...@sumpfralle.de>
> ---
> target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
> b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
> index 81d3982..b41f275 100644
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_gpio-switches
> @@ -10,10 +10,10 @@ board=$(ar71xx_board_name)
>
> case "$board" in
> nanostation-m)
> - ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
> + ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8"
> ;;
> nanostation-m-xw)
> - ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "8"
> + ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
> ;;
> cpe510)
> ucidef_set_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
