Hi,
patch fails to apply to my tree in combination with other backports.
please rebase and resend once i pushed my tree
On 15/07/2015 11:04, Jaehoon You wrote:
> backport of r46248.
>
> Signed-off-by: Jaehoon You <teslam...@gmail.com>
> ---
> target/linux/ar71xx/base-files/etc/diag.sh | 1 +
> .../ar71xx/base-files/etc/uci-defaults/01_leds | 8 ++
> .../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../base-files/lib/preinit/05_set_iface_mac_ar71xx | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-3.18 | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c | 133
> +++++++++++++++++++++
> target/linux/ar71xx/generic/profiles/d-link.mk | 10 ++
> target/linux/ar71xx/image/Makefile | 9 ++
> .../610-MIPS-ath79-openwrt-machines.patch | 25 +++-
> 11 files changed, 189 insertions(+), 6 deletions(-)
> mode change 100644 => 100755
> target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> create mode 100644
> target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
>
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> b/target/linux/ar71xx/base-files/etc/diag.sh
> index 4bdb53d..b1195a3 100644
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -57,6 +57,7 @@ get_status_led() {
> dir-505-a1 |\
> dir-600-a1 |\
> dir-615-e1 |\
> + dir-615-i1 |\
> dir-615-e4)
> status_led="d-link:green:power"
> ;;
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> index 19814f4..3cafc6f 100644
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> @@ -145,6 +145,14 @@ dir-825-b1)
> ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
> ;;
>
> +dir-615-i1)
> + ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
> + ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0"
> + ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0"
> + ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
> + ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
> + ;;
> +
> dir-825-c1)
> ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
> ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g"
> "phy0tpt"
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> old mode 100644
> new mode 100755
> index 4fe951e..8cf3b3b
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> @@ -213,6 +213,7 @@ tl-wr941nd)
>
> r6100 |\
> smart-300 |\
> +dir-615-i1 |\
> tl-mr3420-v2 |\
> tl-wr841n-v8 |\
> tl-wr842n-v2 |\
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 8f4bb40..711f2b0 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -405,6 +405,9 @@ ar71xx_board_detect() {
> *"DIR-615 rev. E4")
> name="dir-615-e4"
> ;;
> + *"DIR-615 rev. I1")
> + name="dir-615-i1"
> + ;;
> *"DIR-825 rev. B1")
> name="dir-825-b1"
> ;;
> diff --git
> a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
> b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
> index b40dff5..c39169a 100644
> --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
> +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
> @@ -29,6 +29,9 @@ preinit_set_mac_address() {
> fetch_mac_from_mtd config lan_mac wan_mac
> echo 1 >
> /sys/class/leds/dir-615-c1:green:wancpu/brightness
> ;;
> + dir-615-i1)
> + fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
> + ;;
> r6100)
> mac_lan=$(mtd_get_mac_binary caldata 0)
> [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index ade47fb..34ae5a5 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -205,6 +205,7 @@ platform_check_image() {
> dir-615-c1 | \
> dir-615-e1 | \
> dir-615-e4 | \
> + dir-615-i1 | \
> dir-825-c1 | \
> dir-835-a1 | \
> dragino2 | \
> diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
> index 05c98eb..cce377e 100644
> --- a/target/linux/ar71xx/config-3.18
> +++ b/target/linux/ar71xx/config-3.18
> @@ -51,6 +51,7 @@ CONFIG_ATH79_MACH_DHP_1565_A1=y
> CONFIG_ATH79_MACH_DIR_505_A1=y
> CONFIG_ATH79_MACH_DIR_600_A1=y
> CONFIG_ATH79_MACH_DIR_615_C1=y
> +CONFIG_ATH79_MACH_DIR_615_I1=y
> CONFIG_ATH79_MACH_DIR_825_B1=y
> CONFIG_ATH79_MACH_DIR_825_C1=y
> CONFIG_ATH79_MACH_DRAGINO2=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
> new file mode 100644
> index 0000000..64fe438
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
> @@ -0,0 +1,133 @@
> +/*
> + * D-Link DIR-615 rev. I1 board support
> + * Copyright (C) 2013-2015 Jaehoon You <teslam...@gmail.com>
> + *
> + * based on the DIR-600 rev. A1 board support code
> + * Copyright (C) 2010-2012 Gabor Juhos <juh...@openwrt.org>
> + * Copyright (C) 2012 Vadim Girlin <vadimgir...@gmail.com>
> + *
> + * based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code
> + * Copyright (C) 2012 Gabor Juhos <juh...@openwrt.org>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/platform_device.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +#define DIR_615_I1_GPIO_LED_WPS 15
> +#define DIR_615_I1_GPIO_LED_POWER_AMBER 14
> +#define DIR_615_I1_GPIO_LED_POWER_GREEN 4
> +#define DIR_615_I1_GPIO_LED_WAN_AMBER 22
> +#define DIR_615_I1_GPIO_LED_WAN_GREEN 12
> +#define DIR_615_I1_GPIO_LED_WLAN_GREEN 13
> +
> +#define DIR_615_I1_GPIO_BTN_WPS 16
> +#define DIR_615_I1_GPIO_BTN_RESET 17
> +
> +#define DIR_615_I1_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL (3 *
> DIR_615_I1_KEYS_POLL_INTERVAL)
> +
> +#define DIR_615_I1_LAN_PHYMASK BIT(0)
> +#define DIR_615_I1_WAN_PHYMASK BIT(4)
> +#define DIR_615_I1_WLAN_MAC_ADDR 0x1fffffb4
> +
> +static struct gpio_led dir_615_i1_leds_gpio[] __initdata = {
> + {
> + .name = "d-link:green:power",
> + .gpio = DIR_615_I1_GPIO_LED_POWER_GREEN,
> + }, {
> + .name = "d-link:amber:power",
> + .gpio = DIR_615_I1_GPIO_LED_POWER_AMBER,
> + }, {
> + .name = "d-link:amber:wan",
> + .gpio = DIR_615_I1_GPIO_LED_WAN_AMBER,
> + }, {
> + .name = "d-link:green:wan",
> + .gpio = DIR_615_I1_GPIO_LED_WAN_GREEN,
> + .active_low = 1,
> + }, {
> + .name = "d-link:green:wlan",
> + .gpio = DIR_615_I1_GPIO_LED_WLAN_GREEN,
> + .active_low = 1,
> + }, {
> + .name = "d-link:blue:wps",
> + .gpio = DIR_615_I1_GPIO_LED_WPS,
> + .active_low = 1,
> + }
> +};
> +
> +static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = {
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = DIR_615_I1_GPIO_BTN_RESET,
> + .active_low = 1,
> + }, {
> + .desc = "wps",
> + .type = EV_KEY,
> + .code = KEY_WPS_BUTTON,
> + .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = DIR_615_I1_GPIO_BTN_WPS,
> + .active_low = 1,
> + }
> +};
> +
> +static void __init dir_615_i1_setup(void)
> +{
> + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
> + u8 mac[ETH_ALEN];
> +
> + ath79_register_mdio(0, 0x0);
> + ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK));
> +
> + ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR),
> mac);
> + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
> + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
> +
> + /* GMAC0 is connected to the PHY0 of the internal switch */
> + ath79_switch_data.phy4_mii_en = 1;
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> + ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK;
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
> +
> + /* GMAC1 is connected to the internal switch */
> + ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK;
> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> +
> + ath79_register_eth(0);
> + ath79_register_eth(1);
> +
> + ath79_register_m25p80(NULL);
> +
> + /* Disable JTAG, enabling GPIOs 0-3 */
> + /* Configure OBS4 line, for GPIO 4*/
> + ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
> + AR934X_GPIO_FUNC_CLK_OBS4_EN);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio),
> + dir_615_i1_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(dir_615_i1_gpio_keys),
> + dir_615_i1_gpio_keys);
> +
> + ath79_register_wmac(eeprom, mac);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1",
> + dir_615_i1_setup);
> diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk
> b/target/linux/ar71xx/generic/profiles/d-link.mk
> index 0909df5..f782a41 100644
> --- a/target/linux/ar71xx/generic/profiles/d-link.mk
> +++ b/target/linux/ar71xx/generic/profiles/d-link.mk
> @@ -93,6 +93,16 @@ endef
>
> $(eval $(call Profile,DIR615E4))
>
> +define Profile/DIR615IX
> + NAME:=D-Link DIR-615 rev. I1
> + PACKAGES:=
> +endef
> +
> +define Profile/DIR615IX/Description
> + Package set optimized for the D-Link DIR-615 rev. I1.
> +endef
> +
> +$(eval $(call Profile,DIR615IX))
>
> define Profile/DIR825B1
> NAME:=D-Link DIR-825 rev. B1
> diff --git a/target/linux/ar71xx/image/Makefile
> b/target/linux/ar71xx/image/Makefile
> index a2a66b8..00fd95b 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -919,6 +919,7 @@
> cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware)
>
> cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
>
> cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
>
> cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
> +cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
>
> cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
>
> cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
>
> cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
> @@ -1100,6 +1101,10 @@ Image/Build/CameoAP99/buildkernel=$(call
> MkuImageLzma,$(2),$(3) $(cameo_ap99_mtd
> Image/Build/CameoAP99=$(call
> Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
> Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3)
> $(cameo_ap99_mtdlayout))
>
> +Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3)
> $(cameo_ap123_mtdlayout_4M))
> +Image/Build/CameoAP123_4M=$(call
> Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
> +Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3)
> $(cameo_ap123_mtdlayout_4M))
> +
> Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
> Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
> Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3)
> $(4))
> @@ -1832,6 +1837,9 @@ $(eval $(call
> SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,1
> $(eval $(call
> SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
> $(eval $(call
> SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
>
> +$(eval $(call
> SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
> +$(eval $(call
> SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
> +
> $(eval $(call
> SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
> $(eval $(call
> SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
> $(eval $(call
> SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
> @@ -1972,6 +1980,7 @@ $(eval $(call
> SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,tt
> $(eval $(call
> SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
>
> $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
> +$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
> $(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
> $(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
> $(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900))
> diff --git
> a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> index d6b6aab..41029fd 100644
> --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
> @@ -1,6 +1,6 @@
> --- a/arch/mips/ath79/machtypes.h
> +++ b/arch/mips/ath79/machtypes.h
> -@@ -16,22 +16,192 @@
> +@@ -16,22 +16,193 @@
>
> enum ath79_mach_type {
> ATH79_MACH_GENERIC = 0,
> @@ -34,6 +34,7 @@
> + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
> + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
> + ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */
> ++ ATH79_MACH_DIR_615_I1, /* D-Link DIR-615 rev. I1 */
> + ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
> + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
> + ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
> @@ -266,7 +267,7 @@
> config ATH79_MACH_AP121
> bool "Atheros AP121 reference board"
> select SOC_AR933X
> -@@ -11,62 +75,996 @@ config ATH79_MACH_AP121
> +@@ -11,62 +75,1007 @@ config ATH79_MACH_AP121
> select ATH79_DEV_M25P80
> select ATH79_DEV_USB
> select ATH79_DEV_WMAC
> @@ -582,6 +583,17 @@
> + select ATH79_DEV_WMAC
> + select ATH79_NVRAM
> +
> ++config ATH79_MACH_DIR_615_I1
> ++ bool "D-Link DIR-615 rev. I1 support"
> ++ select SOC_AR934X
> ++ select ATH79_DEV_AP9X_PCI if PCI
> ++ select ATH79_DEV_ETH
> ++ select ATH79_DEV_GPIO_BUTTONS
> ++ select ATH79_DEV_LEDS_GPIO
> ++ select ATH79_DEV_M25P80
> ++ select ATH79_DEV_WMAC
> ++ select ATH79_NVRAM
> ++
> +config ATH79_MACH_DIR_825_B1
> + bool "D-Link DIR-825 rev. B1 board support"
> + select SOC_AR71XX
> @@ -1291,7 +1303,7 @@
>
> config ATH79_MACH_UBNT_XM
> bool "Ubiquiti Networks XM/UniFi boards"
> -@@ -83,6 +1081,97 @@ config ATH79_MACH_UBNT_XM
> +@@ -83,6 +1092,97 @@ config ATH79_MACH_UBNT_XM
> Say 'Y' here if you want your kernel to support the
> Ubiquiti Networks XM (rev 1.0) board.
>
> @@ -1389,7 +1401,7 @@
> endmenu
>
> config SOC_AR71XX
> -@@ -124,7 +1213,10 @@ config ATH79_DEV_DSA
> +@@ -124,7 +1224,10 @@ config ATH79_DEV_DSA
> config ATH79_DEV_ETH
> def_bool n
>
> @@ -1401,7 +1413,7 @@
> def_bool n
>
> config ATH79_DEV_GPIO_BUTTONS
> -@@ -154,6 +1246,11 @@ config ATH79_PCI_ATH9K_FIXUP
> +@@ -154,6 +1257,11 @@ config ATH79_PCI_ATH9K_FIXUP
> def_bool n
>
> config ATH79_ROUTERBOOT
> @@ -1415,7 +1427,7 @@
> endif
> --- a/arch/mips/ath79/Makefile
> +++ b/arch/mips/ath79/Makefile
> -@@ -38,9 +38,121 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
> +@@ -38,9 +38,122 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
> #
> # Machines
> #
> @@ -1441,6 +1453,7 @@
> +obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
> +obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
> +obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
> ++obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o
> +obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
> +obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
> +obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
