Em 05-04-2012 03:42, Vaclav Peroutka escreveu:
I am using STM32F4 Discovery kit with CodeLite and OpenOCD from Freddie's pages
and it works pretty good.
Do you know of any tutorial for configuring CodeLite as cross
compiler/Debugger? I am using Eclipse but CodeLite is so much better...
Al
I just want to add that there is a tcl hook that gets called when gdb
connects. Depending on how you use openocd/gdb, that one can be more
convenient for doing a reset init than with monitor commands from within
gdb.
As has been said already, openocd (and gdb) should do as little as possible
to th
On Thu, Nov 24, 2011 at 3:59 AM, Mashal al-shboul wrote:
> Hi Xiaofan ,Thanks for replying
> i use libftd2xx0.4.16 and openOCD 0.5.0
> actually my target is to run "make intelmote2 install openocd" which halts
> at " starting openOCD...".
> i installed the follwoing packages(from software center)
We're switching to checkpatch's coding standard and gerrit will automatically
do all the checks now, so a whitespace fix snuck into this patch.
We plan to do a wholesale reformatting after next release, meanwhile we require
all new patches to be checkpatch clean.
The plan is to get the entire Ope
On Tue, Nov 1, 2011 at 3:30 PM, wrote:
> This is an automated email from Gerrit.
>
> ?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to
> Gerrit, which you can find at http://openocd.zylin.com/156
>
> -- gerrit
>
> commit 09b17046aaca462496d634508567e3a543719c17
> Author: Øy
This is an automated email from Gerrit.
Spencer Oliver (s...@spen-soft.co.uk) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/167
-- gerrit
commit b6d2fa6a9f0892500b5c632dccc46f0f24cb6031
Author: Spencer Oliver
Date: Thu Nov 3 23:33:37 2011 +
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/166
-- gerrit
commit 4d060d29f5cbafd6703bd36d3ce096d19bdc3a9e
Author: Ãyvind Harboe
Date: Thu Nov 3 21:51:31 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/165
-- gerrit
commit 4f112d1b8d93eed59fa5e41b4937475cb52b05ac
Author: Ãyvind Harboe
Date: Thu Nov 3 21:49:59 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/164
-- gerrit
commit 1307ca49a71a8977e76818ecd062498f608acd51
Author: Ãyvind Harboe
Date: Thu Nov 3 21:48:04 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/163
-- gerrit
commit 8a04e8e3c997a8ce0808af0ddf3f4702e16e3cd7
Author: Ãyvind Harboe
Date: Thu Nov 3 21:45:38 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/162
-- gerrit
commit b311a1a7920d24b7436be3e390b8139700d3ba18
Author: Ãyvind Harboe
Date: Thu Nov 3 21:43:31 2011 +0100
This is an automated email from Gerrit.
Spencer Oliver (s...@spen-soft.co.uk) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/161
-- gerrit
commit 6a59e2bbe6089b74828bfeab681ae84ccc70ced2
Author: Spencer Oliver
Date: Thu Nov 3 20:42:50 2011 +
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/159
-- gerrit
commit 4a9cbe6c424a6b40f04a6657c71914cd851f500c
Author: Ãyvind Harboe
Date: Thu Nov 3 21:34:00 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/160
-- gerrit
commit 68f4516e3aa75a29ed3c16a812e4219209f40fab
Author: Ãyvind Harboe
Date: Thu Nov 3 21:39:23 2011 +0100
On Tue, Nov 1, 2011 at 11:16 PM, Tomek CEDRO wrote:
> Hey does this code is related anyhow to arm_adi_v5 or this is totally
> alternative solution?
>
>
Yes, it *uses* arm_adi_v5.
/Andreas
___
Openocd-development mailing list
Openocd-development@lists.b
This is an automated email from Gerrit.
Mark Vels (mark.v...@team-embedded.nl) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/158
-- gerrit
commit 2fb67e0d442b3e00e81df5fadd4eedc930e3bd6d
Author: Mark Vels
Date: Tue Nov 1 13:29:11 2011 +0100
tx27
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/157
-- gerrit
commit aa9bc05890f74e51599e38d5ad195bb7af848261
Author: Ãyvind Harboe
Date: Wed Nov 2 10:48:44 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/156
-- gerrit
commit 09b17046aaca462496d634508567e3a543719c17
Author: Ãyvind Harboe
Date: Tue Nov 1 23:28:10 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/155
-- gerrit
commit 9ed94239e8e1113c0aeb249cc6882be0d994282d
Author: Ãyvind Harboe
Date: Tue Nov 1 23:20:49 2011 +0100
Hey does this code is related anyhow to arm_adi_v5 or this is totally
alternative solution?
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listin
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/154
-- gerrit
commit 4a81c9d741a4743a09c01ca3aac8167ac245ce53
Author: Ãyvind Harboe
Date: Tue Nov 1 22:59:17 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/153
-- gerrit
commit 20f3092a5c78c284fa4da3fe1816610c8cdaab13
Author: Ãyvind Harboe
Date: Tue Nov 1 22:56:28 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/152
-- gerrit
commit 96c3cbfab96ef837464189de0cbc66ce3400172a
Author: Ãyvind Harboe
Date: Tue Nov 1 22:53:54 2011 +0100
This is an automated email from Gerrit.
Spencer Oliver (s...@spen-soft.co.uk) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/151
-- gerrit
commit 701fc7bac5ff533a887c07a00c661a6a734b804d
Author: Spencer Oliver
Date: Tue Nov 1 21:13:54 2011 +
This is an automated email from Gerrit.
Spencer Oliver (s...@spen-soft.co.uk) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/150
-- gerrit
commit 6bcdf461c1b4f0c6a72aaa15a909d828547f2e92
Author: Spencer Oliver
Date: Tue Nov 1 21:12:58 2011 +
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/149
-- gerrit
commit 9416d087f9555d3b28ca7688ba95992dc1e24cc4
Author: Ãyvind Harboe
Date: Tue Nov 1 22:10:54 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/148
-- gerrit
commit 4aa87793756ce82541d1c142e63b30c1c0fcc4a6
Author: Ãyvind Harboe
Date: Tue Nov 1 22:00:46 2011 +0100
This is an automated email from Gerrit.
Spencer Oliver (s...@spen-soft.co.uk) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/146
-- gerrit
commit 459b9f8334c55ae38f5d1bb1110dc242a1947b5b
Author: Spencer Oliver
Date: Mon Oct 31 22:20:06 2011 +
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/145
-- gerrit
commit ac49319f38c6d8bd7d3a236b4b677e1e7470b0c7
Author: Ãyvind Harboe
Date: Mon Oct 31 22:03:49 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/144
-- gerrit
commit 3be00928f3d407c4476590dcadd3c707ba915c3b
Author: Ãyvind Harboe
Date: Mon Oct 31 21:52:10 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/143
-- gerrit
commit 87ad830a0b9f6e2d8104f93f3e074b92aba4ef5f
Author: Øyvind Harboe
Date: Mon Oct 31 21:26:28 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/142
-- gerrit
commit 91a30acedbbd5477e7a22aba4785d7eb5e6b81b2
Author: Øyvind Harboe
Date: Mon Oct 31 21:21:35 2011 +0100
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/141
-- gerrit
commit c527ebb4f303816a2fa2211379443590ce8659c2
Author: Øyvind Harboe
Date: Thu Oct 27 23:51:50 2011 +0200
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/140
-- gerrit
commit 8cb99c45f508b20fbac9aa9649374b774cb647d8
Author: Øyvind Harboe
Date: Sun Oct 30 18:36:47 2011 +0100
ger...@openocd.zylin.com wrote:
> +++ b/tcl/target/atmega128.cfg
> @@ -1,12 +1,12 @@
> # for avr
>
> - set _CHIPNAME avr
> - set _ENDIAN little
> + set _CHIPNAME avr
> + set _ENDIAN little
Why keep indent here?
> # jtag speed
> adapter_khz 4500
>
> -reset_config srst_only
> +res
This is an automated email from Gerrit.
Uwe Hermann (u...@hermann-uwe.de) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/138
-- gerrit
commit 2533760c5219527a8887c560babc75087f8b6074
Author: Uwe Hermann
Date: Sun Oct 30 01:44:18 2011 +0200
interf
This is an automated email from Gerrit.
Uwe Hermann (u...@hermann-uwe.de) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/139
-- gerrit
commit b2c9a43fba25257c692ff78101613aa309b76923
Author: Uwe Hermann
Date: Sun Oct 30 01:45:11 2011 +0200
interf
This is an automated email from Gerrit.
Uwe Hermann (u...@hermann-uwe.de) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/136
-- gerrit
commit 6ada46d8639bb44800e526111291172506122c0d
Author: Uwe Hermann
Date: Sat Oct 29 22:58:12 2011 +0200
config
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/135
-- gerrit
commit ccbf006b0af960d6c8462774e76ddc7df933c2b8
Author: Øyvind Harboe
Date: Sat Oct 29 17:37:42 2011 +0200
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/134
-- gerrit
commit 620ba7e6cd57c951fafa0f1ffab2db102fe2a60f
Author: Øyvind Harboe
Date: Sat Oct 29 10:55:02 2011 +0200
This is an automated email from Gerrit.
?yvind Harboe (oyvindhar...@gmail.com) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/133
-- gerrit
commit 1533d9d1fbb0c09e1fcc8d42a02402adaa4011ad
Author: Øyvind Harboe
Date: Fri Oct 28 17:22:32 2011 +0200
Jason wrote:
> 1.) Threading versions of a patch series together.
I think Gerrit already does this. Did you try it?
//Peter
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-deve
Alex,
On Mon, Oct 17, 2011 at 04:04:21PM -0500, Austin, Alex wrote:
> > -Original Message-
> > From: openocd-development-boun...@lists.berlios.de [mailto:openocd-
> > development-boun...@lists.berlios.de] On Behalf Of Jason
> >
> > ...
> >
> > 1.) Threading versions of a patch series toge
> -Original Message-
> From: openocd-development-boun...@lists.berlios.de [mailto:openocd-
> development-boun...@lists.berlios.de] On Behalf Of Jason
>
> ...
>
> 1.) Threading versions of a patch series together. So, when the
> maintainer has a chance to look at the thread, he/she can j
Peter,
On Wed, Oct 12, 2011 at 01:21:44PM +0200, Peter Stuge wrote:
> Jason wrote:
> > Is there any intent to integrate gerrit back into the ML?
>
> Sending email is easy. Receiving and parsing email is not as easy.
Agreed, I've been thinking through the obstacles, from a submitter pov,
and I've
Hi Jean-Christophe,
the whole point of Gerrit is that the contributors can manage patches instead
of the maintainers.
We even want/plan to have automated checks on checkpatch.pl and
building the patch checking for warnings so maintainers can ignore patches
that don't pass those tests.
The mainta
Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > how about using patchwoek simply as done for the kernel ML?
> >
> > One significant benefit of Gerrit is that it integrates really
> > well with git. Gerrit takes input from git, and output from
> > Gerrit goes to git.
..
> I prefer to manage git by my
On 19:31 Wed 12 Oct , Peter Stuge wrote:
> Jean-Christophe PLAGNIOL-VILLARD wrote:
> > how about using patchwoek simply as done for the kernel ML?
>
> One significant benefit of Gerrit is that it integrates really well
> with git. Gerrit takes input from git, and output from Gerrit goes to
> g
Jean-Christophe PLAGNIOL-VILLARD wrote:
> how about using patchwoek simply as done for the kernel ML?
One significant benefit of Gerrit is that it integrates really well
with git. Gerrit takes input from git, and output from Gerrit goes to
git. This helps everyone who is working with the code.
Pa
__
> Openocd-development mailing list
> Openocd-development@lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openocd-development
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
Jason wrote:
> Is there any intent to integrate gerrit back into the ML?
Sending email is easy. Receiving and parsing email is not as easy.
Thus anything actually worth calling integration takes a fair bit of
work.
> See [1] for an existing gripe.
I'm the Peter refered to there. I also like to
list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
_______
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
On 11/10/2011 20:54, Øyvind Harboe wrote:
Hi Jason,
I do share your concern that we're loosing something when we're not
using the mailing list to discuss patches.
However, I certainly still welcome discussion of patches in the mailing list
prior to pushing them to Gerrit. In fact I think that i
Hi Jason,
I do share your concern that we're loosing something when we're not
using the mailing list to discuss patches.
However, I certainly still welcome discussion of patches in the mailing list
prior to pushing them to Gerrit. In fact I think that if the entire
discussion was
in the mailing l
On Tue, Oct 11, 2011 at 01:40:28PM +0100, Spencer Oliver wrote:
> We are now testing Gerrit for use within OpenOCD.
Just a comment from a lurker. Is there any intent to integrate gerrit
back into the ML? See [1] for an existing gripe.
The main difference I see between gerrit and a mailinglist i
On Tue, Oct 11, 2011 at 5:59 PM, Tormod Volden wrote:
> On Tue, Oct 11, 2011 at 4:14 PM, Laurent Gauch wrote:
>> Why using a commercial server and a commercial url for an open source
>> project?
>
> heh, like sourceforge.net, code.google.com, github.com or launchpad.net?
>
> So that the open-sourc
On Tue, Oct 11, 2011 at 4:14 PM, Laurent Gauch wrote:
> Why using a commercial server and a commercial url for an open source
> project?
heh, like sourceforge.net, code.google.com, github.com or launchpad.net?
So that the open-source crowd can spend their valuable time on
producing free and open-
Laurent Gauch wrote:
> Why using a commercial server and a commercial url for an open
> source project?
What is "a commercial server"?
A company has donated resources to the project for running Gerrit.
I don't think the URL that is used really matters. Do you? Really?
Perhaps you can focus on t
Hi Spen,
Why using a commercial server and a commercial url for an open source project?
Regards,
Laurent
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
Spencer Oliver wrote:
> git remote add review ssh://usern...@openocd.zylin.com:29418/openocd.git
> git config remote.review.push HEAD:refs/for/master
When pushing, run:
git push review
Thanks to the remote.review.push setting this will push whatever is
currently checked out.
As always, use git
Spencer Oliver wrote:
> It is advised to keep each patch in its own branch.
I'll try to explain this a little.
If multiple commits are pushed, ie. if the branch being pushed has
more than one commit which is not in the main openocd.git repo, then
Gerrit will record that these commits form a chain
Spencer Oliver wrote:
> One addition i forgot to mention.
> Gerrit uses a Change-Id to track the change, thsi is generated client
> side using a hook.
>
> You will need to install this hook, we will look into a better solution
> scp -p -P 29418 usern...@openocd.zylin.com:hooks/commit-msg .git/hook
On 11 October 2011 13:40, Spencer Oliver wrote:
> Hi,
>
> We are now testing Gerrit for use within OpenOCD.
> A Gerrit server has been setup at the following url:
> http://openocd.zylin.com/
>
> To keep loading down on the server clone as usual:
> git clone git://openocd.git.sourceforge.net/gitroo
Hi,
We are now testing Gerrit for use within OpenOCD.
A Gerrit server has been setup at the following url:
http://openocd.zylin.com/
To keep loading down on the server clone as usual:
git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd for example
The change happens we want to su
On Wed, Oct 5, 2011 at 1:08 PM, Spencer Oliver wrote:
> mmm - must have been a long day
> Thanks for the correction
Have a great evening Spen! :-)
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
___
Openocd-development mailing list
Openocd-development
On 5 October 2011 12:20, Tomek CEDRO wrote:
> On Tue, Oct 4, 2011 at 1:26 PM, Spencer Oliver wrote:
>> Due to the recent news about Berlios closure on 31.12.2011 we are
>> moving the mailing list to sourceforge.
>>
>> http://lists.sourceforge.net/mailman/listinfo/openocd-devel - was
>> http://lis
On Tue, Oct 4, 2011 at 1:26 PM, Spencer Oliver wrote:
> Due to the recent news about Berlios closure on 31.12.2011 we are
> moving the mailing list to sourceforge.
>
> http://lists.sourceforge.net/mailman/listinfo/openocd-devel - was
> http://lists.berlios.de/mailman/listinfo/openocd-development
>
Due to the recent news about Berlios closure on 31.12.2011 we are
moving the mailing list to sourceforge.
http://lists.sourceforge.net/mailman/listinfo/openocd-devel - was
http://lists.berlios.de/mailman/listinfo/openocd-development
http://lists.sourceforge.net/mailman/listinfo/openocd-commit - wa
>> Is it a bug that xscale_read_dcsr() exits with the TAP in state
>> TAP_DRPAUSE? The attached patch seems to make the "Bad value '00'"
>> messages go away.
>>
>> If this patch looks correct I'll submit a proper patch to commit.
Hi Matt,
I was on a vacation and wasn't able to check your patch
On Mon, Sep 19, 2011 at 10:13 AM, Matt Reimer wrote:
> On Tue, Sep 13, 2011 at 9:28 AM, Oliver Döring wrote:
>> Hi,
>>
>> I'm having lots of problems with this Toradex board.
>>
>> I use a custom carrier board without JTAG buffers, so I connected my
>> JTAG-USB directly to the Colibri FFC JTAG co
On Tue, Sep 13, 2011 at 9:28 AM, Oliver Döring wrote:
> Hi,
>
> I'm having lots of problems with this Toradex board.
>
> I use a custom carrier board without JTAG buffers, so I connected my
> JTAG-USB directly to the Colibri FFC JTAG connector. My JTAG adapter is
> FT2232 based and uses the OOCDLi
On Tue, Sep 13, 2011 at 9:28 AM, Oliver Döring wrote:
> Hi,
>
> I'm having lots of problems with this Toradex board.
>
> I use a custom carrier board without JTAG buffers, so I connected my
> JTAG-USB directly to the Colibri FFC JTAG connector. My JTAG adapter is
> FT2232 based and uses the OOCDLi
Hi again,
just a short follow-up: I successfully flashed a bootloader using my
hardware and Colibri Loader from Toradex under Windows. Colibri Loader
assumes an Amontec JTAG-key, which I don't have. But it worked anyway.
So it is definitely an OpenOCD problem.
Best regards,
Oliver
__
Hi Mathias,
thanks for your help.
the board already buffers the lines TMS,nTRST,TCK,TDI and TDO with a
SN74LVC16244A
I'm not using the Toradex evaluation board. I connect directly to the
Colibri module using the small flex flat cable connector.
Please post your configuration file. Is it
Hello,
Am 13.09.2011 15:28, schrieb Oliver Döring:
> I'm having lots of problems with this Toradex board.
>
> I use a custom carrier board without JTAG buffers, so I connected my JTAG-USB
> directly to the
> Colibri FFC JTAG connector. My JTAG adapter is FT2232 based and uses the
> OOCDLink lay
Hi,
I'm having lots of problems with this Toradex board.
I use a custom carrier board without JTAG buffers, so I connected my
JTAG-USB directly to the Colibri FFC JTAG connector. My JTAG adapter is
FT2232 based and uses the OOCDLink layout, which means it has NTRST and
NSRST buffers with OE.
Hello,
I am Karthick ,now I am in IDE development for cortex-M3 controller . I would
like to know some of the information regarding OpenOCD development.
My development tools are ,
Target : Cortex -M3
Compiler : arm-none-linux-gnu-eabi-gcc (from codesourcery)
Debugger : arm-none-lin
Running openrd_load_uboot from a freshly made uboot v2011.06 tagged release
directory gives:
sudo openocd -f /opt/openocd/share/openocd/scripts/board/openrd.cfg
Open On-Chip Debugger 0.6.0-dev-00048-ge175f02 (2011-08-29-04:39)
Licensed under GNU GPL v2
For bug reports, read
http://openocd
On Thu, Aug 11, 2011 at 1:59 AM, Freddie Chopin wrote:
> Hi!
>
> I've just posted Windows packages with OpenOCD 0.5.0 on my website -
> http://www.freddiechopin.info/ - enjoy (;
BTW, your 64bit build will not work with those parallel port based
dongles. The issue is the driver used, as far as I k
On Fri, Aug 12, 2011 at 5:45 AM, Steve Bennett wrote:
> On 11/08/2011, at 8:17 PM, Xiaofan Chen wrote:
>>> I think we have to wait for the fix from Spen and Steve.
>
> Yes. We are still working on the problem.
> It's taking a while because I can't reproduce it here.
Yes it is quite strange. I jus
On 11/08/2011, at 8:17 PM, Xiaofan Chen wrote:
> On Thu, Aug 11, 2011 at 5:16 PM, Xiaofan Chen wrote:
>> On Thu, Aug 11, 2011 at 5:11 PM, Vit Mares wrote:
>>> Thank you very much but no success.
>>> It is on Windows XP Pro SP3 and fresh MinGW instalation.
>>
>> I think we have to wait for the f
On Thu, Aug 11, 2011 at 5:16 PM, Xiaofan Chen wrote:
> On Thu, Aug 11, 2011 at 5:11 PM, Vit Mares wrote:
>> Thank you very much but no success.
>> It is on Windows XP Pro SP3 and fresh MinGW instalation.
>
> I think we have to wait for the fix from Spen and Steve.
>
> In any case, you can use the
On Thu, Aug 11, 2011 at 5:11 PM, Vit Mares wrote:
> Thank you very much but no success.
> It is on Windows XP Pro SP3 and fresh MinGW instalation.
I think we have to wait for the fix from Spen and Steve.
In any case, you can use the binary from Freddie Chopin
to start using OpenOCD. Or you can u
Thank you very much but no success.
It is on Windows XP Pro SP3 and fresh MinGW instalation.
Best regards
Vit
2011/8/11 Xiaofan Chen :
> On Thu, Aug 11, 2011 at 4:33 PM, Vit Mares wrote:
> It is still a myth to me. I have one PC working (XP Pro SP3) and
> two other PCs not working (Vista 32bi
On 11 August 2011 09:18, Karthick Anand wrote:
> Hello,
>
> I would like to introduce myself as Karthick working as a Design Engineer in
> Kalycito Info tech,Coimbatore.Now i am working in STM32 Micro controller,for
> that i need to debug it via ST-Link/V2/01-0 adapter.Is this "Openocd" will
>
On Thu, Aug 11, 2011 at 12:42 AM, Mahr, Stefan wrote:
> Hi Drasko
>
>
>> Solution is more common, but the commit history is not clearer. You
>> are fixing several bugs in one patch...
>
> Serveral? Just one and a half :-)
> However, I stripped the alignment fix to a seperate patch file. Please fin
On Thu, Aug 11, 2011 at 4:33 PM, Vit Mares wrote:
> what is the actual directeory when you run
> ../configure
> /configure
mkdir build
cd build
../configure --xx
> How did you manage the jimtcl problem on MinGW, I still end with
>
> === configuring in jimtcl (/home/maresv/openocd
Dear Xiaofan,
what is the actual directeory when you run
../configure
/configure
How did you manage the jimtcl problem on MinGW, I still end with
=== configuring in jimtcl (/home/maresv/openocd-0.5.0/jimtcl)
configure: running /bin/sh ./configure.gnu --disable-option-checking
'--prefix
Hello,
I would like to introduce myself as Karthick working as a Design Engineer in
Kalycito Info tech,Coimbatore.Now i am working in STM32 Micro controller,for
that i need to debug it via ST-Link/V2/01-0 adapter.Is this "Openocd" will
support ST-Link adapter?
Kindly give me the information,
On Thu, Aug 11, 2011 at 9:26 AM, Xiaofan Chen wrote:
> On Thu, Aug 11, 2011 at 1:59 AM, Freddie Chopin wrote:
>> Hi!
>>
>> I've just posted Windows packages with OpenOCD 0.5.0 on my website -
>> http://www.freddiechopin.info/ - enjoy (;
>
> This is great. Thanks.
>
Here is another test binary bu
On Thu, Aug 11, 2011 at 1:59 AM, Freddie Chopin wrote:
> Hi!
>
> I've just posted Windows packages with OpenOCD 0.5.0 on my website -
> http://www.freddiechopin.info/ - enjoy (;
This is great. Thanks.
> Below I post the news article associated with this files
> __
Hi Drasko
> Solution is more common, but the commit history is not clearer. You
> are fixing several bugs in one patch...
Serveral? Just one and a half :-)
However, I stripped the alignment fix to a seperate patch file. Please find the
three new patches attached.
> Besides, I have an impressi
Hi!
I've just posted Windows packages with OpenOCD 0.5.0 on my website -
http://www.freddiechopin.info/ - enjoy (;
Below I post the news article associated with this files
OpenOCD 0.5.0 finally published!
Almost one and a half year pas
On Sat, Jul 30, 2011 at 4:26 AM, Mahr, Stefan wrote:
> Hi Drasko.
>
>> Drasko DRASKOVIC (1):
>> mips32 : Fixed memory byte access
>
> Your patch fixes the broken byte access, but not the big endian host issue.
Hi Stefan,
this is true. But my intention was not to go in changing all these
func
Hi All,
I am new to openOCD family and trying to use it for my small ARM board with
cortex m3
I installed and connected openOCD for the first time today with cortex m3.
After the connection I am trying to execute dap commands as given in the manual.
I am using 0.4.0 version as I thought the latest
On Sat, Jul 30, 2011 at 7:10 PM, Tomek CEDRO wrote:
> Hello! :-) Trying to bootstrap on FreeBSD 8.2-RELEASE fails with the
> 0.5.0-rc2 as given at:
>
>
> http://openocd.git.sourceforge.net/git/gitweb.cgi?p=openocd/openocd;a=snapshot;h=d4cd6f032015552f00bf4b5a90f25f5f958e9d9e;sf=tgz
>
> This shoul
Hello! :-) Trying to bootstrap on FreeBSD 8.2-RELEASE fails with the
0.5.0-rc2 as given at:
http://openocd.git.sourceforge.net/git/gitweb.cgi?p=openocd/openocd;a=snapshot;h=d4cd6f032015552f00bf4b5a90f25f5f958e9d9e;sf=tgz
This should probably never happen with the "real" package as configure
scrip
Andreas Fritiofson wrote:
>> +void target_buffer_get_u32_array(struct target *target, const uint8_t
>> *buffer, uint32_t count, uint32_t *dstbuf);
>> +void target_buffer_get_u16_array(struct target *target, const uint8_t
>> *buffer, uint32_t count, uint16_t *dstbuf);
>> +void target_buffer_set_u3
On Sat, Jul 30, 2011 at 4:26 AM, Mahr, Stefan wrote:
> Hi Drasko.
>
> > Drasko DRASKOVIC (1):
> > mips32 : Fixed memory byte access
>
> Your patch fixes the broken byte access, but not the big endian host issue.
> Since both problems are tied together, I would prefer a more common
> solution.
Hi Drasko.
> Drasko DRASKOVIC (1):
> mips32 : Fixed memory byte access
Your patch fixes the broken byte access, but not the big endian host issue.
Since both problems are tied together, I would prefer a more common solution.
Attached patch hopefully fixes both issues. It should also fix al
1 - 100 of 1270 matches
Mail list logo
