Dear Xiaofan,
what is the actual directeory when you run
../configure
<DOT><DOT>/configure
How did you manage the jimtcl problem on MinGW, I still end with
=== configuring in jimtcl (/home/maresv/openocd-0.5.0/jimtcl)
configure: running /bin/sh ./configure.gnu --disable-option-checking
'--prefix=/home/maresv/openocd_dist_050' '--enable
-parport' '--enable-parport-giveio' '--enable-ft2232_ftd2xx'
'--with-ftd2xx-win32-zipdir=/home/maresv/drivers_ftdi' --ca
che-file=/dev/null --srcdir=.
The system cannot find the path specified.
autosetup/system.tcl:150: Error:
in procedure 'use' called at file "auto.def", line 5
in procedure 'use' called at file "autosetup/cc.tcl", line 29
in procedure 'config_guess' called at file "autosetup/system.tcl", line 150
Try: 'configure --debug' for a full stack trace
configure: error: ./configure.gnu failed for jimtcl
Thank you very much.
Best regards
Vit
2011/8/11 Xiaofan Chen <xiaof...@gmail.com>:
>
> Here is another test binary build of OpenOCD-0.5.0.
> http://code.google.com/p/picusb/downloads/detail?name=openocd_0.5.0_mingw_new.zip
>
> This is a test build of OpenOCD-0.5.0 release under MinGW. YMMV.
>
>
> The build is configured with the following option so that only the following
> hardware are supported.
> ../configure --enable-ft2232_libftdi --enable-presto_libftdi \
> --enable-arm-jtag-ew --enable-jlink --enable-rlink \
> --enable-usbprog --enable-vsllink --enable-usb_blaster_libftdi \
> --disable-shared --disable-werror
>
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
