Quoting Andrew Lunn :
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
> From: linux-rdma-ow...@vger.kernel.org ow...@vger.kernel.org> On Behalf Of Jason Gunthorpe
>
> On Thu, Jul 25, 2019 at 07:34:15PM +, Michal Kalderon wrote:
> > > > + ibdev_dbg(ucontext->device,
> > > > + "mmap: obj[0x%p] key[%#llx] addr[%#llx] len[%#llx]
> > > removed\
On Thu, Jul 25, 2019 at 10:30:51AM -0700, Jonathan Lemon wrote:
>
>
> On 25 Jul 2019, at 8:56, Richardson, Bruce wrote:
>
> >> -Original Message-
> >> From: Jonathan Lemon [mailto:jonathan.le...@gmail.com]
> >> Sent: Thursday, July 25, 2019 4:39 PM
> >> To: Laatz, Kevin
> >> Cc: netdev@
[ Please CC me I am not subscribed to this ML ]
Hi Andy,
unfortunately, I did not found a cover-letter on netdev mailing-list.
So, I am answering here.
What are the changes v2->v3?
Again, unfortunately I throw away all v2 out of my local linux Git repository.
So, I could have looked at the diff
On Thu, Jul 25, 2019 at 4:44 AM Neil Horman wrote:
>
> On Wed, Jul 24, 2019 at 04:12:43PM -0300, Marcelo Ricardo Leitner wrote:
> > On Wed, Jul 24, 2019 at 04:05:43PM -0300, Marcelo Ricardo Leitner wrote:
> > > On Wed, Jul 24, 2019 at 02:44:56PM -0400, Neil Horman wrote:
> > > > On Wed, Jul 24, 20
From: Thierry Reding
The Tegra EQOS driver already resets the MDIO bus at probe time via the
reset GPIO specified in the phy-reset-gpios device tree property. There
is no need to reset the bus again later on.
This avoids the need to query the device tree for the snps,reset GPIO,
which is not par
From: Thierry Reding
The stmmaceth clock is specified by the slave_bus and apb_pclk clocks in
the device tree bindings for snps,dwc-qos-ethernet-4.10 compatible nodes
of this IP.
The subdrivers for these bindings will be requesting the stmmac clock
correctly at a later point, so there is no need
On Thu, 2019-07-25 at 21:27 +, Saeed Mahameed wrote:
> On Thu, 2019-07-25 at 14:25 +0200, Davide Caratti wrote:
> > On Wed, 2019-07-24 at 20:47 +, Saeed Mahameed wrote:
> > > On Wed, 2019-07-24 at 16:02 +0200, Davide Caratti wrote:
> > > > ensure to call netdev_features_change() when the dr
On Fri 26 Jul 2019 at 09:17, we...@ucloud.cn wrote:
> From: wenxu
>
> move tc indirect block to flow_offload and rename
> it to flow indirect block.The nf_tables can use the
> indr block architecture.
>
> Signed-off-by: wenxu
> ---
> v2: make use of flow_block from Pablo
> flow_indr_rhashta
On Fri, Jul 26, 2019 at 10:54:22AM +0200, Sedat Dilek wrote:
> [ Please CC me I am not subscribed to this ML ]
>
> Hi Andy,
>
> unfortunately, I did not found a cover-letter on netdev mailing-list.
> So, I am answering here.
>
> What are the changes v2->v3?
I combined my 11 patches with 1 from
On Fri, Jul 26, 2019 at 12:24 AM Saeed Mahameed wrote:
>
> On Thu, 2019-07-25 at 19:24 +0800, we...@ucloud.cn wrote:
> > From: wenxu
> >
> > The flow_cls_common_offload prio is zero
> >
> > It leads the invalid table prio in hw.
> >
> > Error: Could not process rule: Invalid argument
> >
> > kern
在 2019/7/26 20:19, Or Gerlitz 写道:
> On Fri, Jul 26, 2019 at 12:24 AM Saeed Mahameed wrote:
>> On Thu, 2019-07-25 at 19:24 +0800, we...@ucloud.cn wrote:
>>> From: wenxu
>>>
>>> The flow_cls_common_offload prio is zero
>>>
>>> It leads the invalid table prio in hw.
>>>
>>> Error: Could not proces
On 26/07/2019 15:02, Horatiu Vultur wrote:
> Hi Nikolay,
>
> The 07/26/2019 12:26, Nikolay Aleksandrov wrote:
>> External E-Mail
>>
>>
>> On 26/07/2019 11:41, Nikolay Aleksandrov wrote:
>>> On 25/07/2019 17:21, Horatiu Vultur wrote:
Hi Nikolay,
The 07/25/2019 16:21, Nikolay Aleksand
The command
ip -details link show can0
prints in the last line the value of the clock frequency attached
to the name of the following value "numtxqueues", e.g.
clock 4950numtxqueues 1 numrxqueues 1 gso_max_size
65536 gso_max_segs 65535
Add the missing space after the c
On Fri, Jul 26, 2019 at 07:19:56AM +, René van Dorst wrote:
> Quoting Andrew Lunn :
>
> >>+ gmac0: mac@0 {
> >>+ compatible = "mediatek,eth-mac";
> >>+ reg = <0>;
> >>+ phy-mode = "sgmii";
> >>+
> >>+ fixed-link {
> >>+ speed = <2500>
On Fri, Jul 26, 2019 at 03:16:04PM +0200, Andrew Lunn wrote:
> Are you sure it is using SGMII and not 2500BaseX? Can you get access
> to the signalling word? SGMII is supposed to indicate to the MAC what
> speed it is using, via inband signalling. So there should not be any
> need for a fixed-link.
On Fri, Jul 26, 2019 at 08:42:07AM +, Michal Kalderon wrote:
> > > But we don't free entires from the xa_array ( only when ucontext is
> > > destroyed) so how will There be an empty element after we wrap ?
> >
> > Oh!
> >
> > That should be fixed up too, in the general case if a user is
> >
> I didn't compile it on this tree, same code is just compiled and tested on
> kernel v4.14.
For kernel development work, v4.14 is dead. It died 12th November
2017. It gets backports of bug fixes, but kernel developers otherwise
don't touch it.
> We are working on one google project, all the chan
From: wenxu
This series patch make nftables offload support the vlan and
tunnel device offload through indr-block architecture.
The first patch mv tc indr block to flow offload and rename
to flow-indr-block.
Because the new flow-indr-block can't get the tcf_block
directly. The second patch provi
From: wenxu
move tc indirect block to flow_offload and rename
it to flow indirect block.The nf_tables can use the
indr block architecture.
Signed-off-by: wenxu
---
v3: subsys_initcall for init_flow_indr_rhashtable
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 10 +-
.../net/ethernet/n
From: wenxu
Because the new flow-indr-block can't get the tcf_block
directly.
It provide a callback to find the tcf block immediately
when the device register and contain a ingress block.
Signed-off-by: wenxu
---
v3: no change
include/net/flow_offload.h | 4
net/core/flow_offload.c|
From: wenxu
nftable support indr-block call. It makes nftable an offload vlan
and tunnel device.
nft add table netdev firewall
nft add chain netdev firewall aclout { type filter hook ingress offload device
mlx_pf0vf0 priority - 300 \; }
nft add rule netdev firewall aclout ip daddr 10.0.0.1 fwd
On Fri, Jul 26, 2019 at 08:39:43PM +0800, wenxu wrote:
>
> 在 2019/7/26 20:19, Or Gerlitz 写道:
> > On Fri, Jul 26, 2019 at 12:24 AM Saeed Mahameed wrote:
> >> On Thu, 2019-07-25 at 19:24 +0800, we...@ucloud.cn wrote:
> >>> From: wenxu
> >>>
> >>> The flow_cls_common_offload prio is zero
> >>>
> >>
Quoting Andrew Lunn :
On Fri, Jul 26, 2019 at 07:19:56AM +, René van Dorst wrote:
Quoting Andrew Lunn :
>>+ gmac0: mac@0 {
>>+ compatible = "mediatek,eth-mac";
>>+ reg = <0>;
>>+ phy-mode = "sgmii";
>>+
>>+ fixed-link {
>>+
On Mon, Jul 15, 2019 at 01:59:33PM +0300, Artem Bityutskiy wrote:
> From: Artem Bityutskiy
>
> Decode 'RR2DCDELAY' register which Linux kernel provides starting from version
> 5.3. The corresponding commit in the Linux kernel is:
> cd502a7f7c9c igb: add RR2DCDELAY to ethtool registers dump
>
On 7/26/19 1:26 AM, Sedat Dilek wrote:
> Hi,
>
> I have opened a new issue in the ClangBuiltLinux issue tracker.
Glad to know clang 9 has asm goto support and now It can compile
kernel again.
>
> I am seeing a problem in the area bpf/seccomp causing
> systemd/journald/udevd services to fail.
The patch series adds support for managing the NVM config attributes.
Patch (1) adds functionality to update config attributes via MFW.
Patch (2) adds driver interface for updating the config attributes.
Changes from previous versions:
---
v2: Removed unused API.
Pleas
The patch adds driver interface for reading the NVM config request and
update the attributes on nvm config flash partition.
This API can be used by ethtool flash update command (i.e., ethtool -f) to
update config attributes in the NVM flash parition.
Signed-off-by: Sudarsana Reddy Kalluru
Signed-
The patch adds API for configuring the NVM config attributes using
Management FW (MFW) interfaces.
Signed-off-by: Sudarsana Reddy Kalluru
Signed-off-by: Ariel Elior
---
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 17 +++
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 35 +++
Hi netdev,
quick question: is there a recommended setup to get a send-only packet
socket? I've been reading net/packet/af_packet.c up and down and don't
see an explicit way, so I ended up binding to ("lo", ETH_P_LOOP)
instead. (Nothing special about ETH_P_LOOP, I just grabbed a random
value tha
This series adds a new map type, devmap_hash, that works like the existing
devmap type, but using a hash-based indexing scheme. This is useful for the use
case where a devmap is indexed by ifindex (for instance for use with the routing
table lookup helper). For this use case, the regular devmap nee
From: Toke Høiland-Jørgensen
When we changed the device and CPU maps to use linked lists instead of
bitmaps, we also removed the need for the map_insert_ctx() helpers to keep
track of the bitmaps inside each map. However, it seems I forgot to remove
the function definitions stubs, so remove those
From: Toke Høiland-Jørgensen
The subsequent patch to add a new devmap sub-type can re-use much of the
initialisation and allocation code, so refactor it into separate functions.
Signed-off-by: Toke Høiland-Jørgensen
Acked-by: Yonghong Song
---
kernel/bpf/devmap.c | 136 ++
From: Toke Høiland-Jørgensen
This adds selftest and bpftool updates for the devmap_hash map type.
Signed-off-by: Toke Høiland-Jørgensen
---
tools/bpf/bpftool/Documentation/bpftool-map.rst |2 +-
tools/bpf/bpftool/bash-completion/bpftool |4 ++--
tools/bpf/bpftool/map.c
From: Toke Høiland-Jørgensen
A common pattern when using xdp_redirect_map() is to create a device map
where the lookup key is simply ifindex. Because device maps are arrays,
this leaves holes in the map, and the map has to be sized to fit the
largest ifindex, regardless of how many devices actual
From: Toke Høiland-Jørgensen
This adds the definition for BPF_MAP_TYPE_DEVMAP_HASH to libbpf_probes.c in
tools/lib/bpf.
Signed-off-by: Toke Høiland-Jørgensen
Acked-by: Yonghong Song
---
tools/lib/bpf/libbpf_probes.c |1 +
1 file changed, 1 insertion(+)
diff --git a/tools/lib/bpf/libbpf_p
From: Toke Høiland-Jørgensen
This adds the devmap_hash BPF map type to the uapi headers in tools/.
Signed-off-by: Toke Høiland-Jørgensen
Acked-by: Yonghong Song
---
tools/include/uapi/linux/bpf.h |1 +
1 file changed, 1 insertion(+)
diff --git a/tools/include/uapi/linux/bpf.h b/tools/inc
On Fri, Jul 26, 2019 at 03:16:22PM +, René van Dorst wrote:
> Quoting Andrew Lunn :
> > On Fri, Jul 26, 2019 at 07:19:56AM +, René van Dorst wrote:
> > > Quoting Andrew Lunn :
> > >
> > > >>+ gmac0: mac@0 {
> > > >>+ compatible = "mediatek,eth-mac";
> > > >>+
This series adds support for Microchip KSZ87xx switches, which are
slightly simpler compared to KSZ9xxx .
Signed-off-by: Marek Vasut
Cc: Andrew Lunn
Cc: David S. Miller
Cc: Florian Fainelli
Cc: Tristram Ha
Cc: Vivien Didelot
Cc: Woojung Huh
Marek Vasut (1):
dt-bindings: net: dsa: ksz: do
Document Microchip KSZ87xx family switches. These include
KSZ8765 - 5 port switch
KSZ8794 - 4 port switch
KSZ8795 - 5 port switch
Signed-off-by: Marek Vasut
Cc: Andrew Lunn
Cc: David S. Miller
Cc: Florian Fainelli
Cc: Rob Herring
Cc: Tristram Ha
Cc: Vivien Didelot
Cc: Woojung Huh
Cc: devic
From: Tristram Ha
Add DSA tag code for Microchip KSZ8795 switch. The switch is simpler
and the tag is only 1 byte, instead of 2 as is the case with KSZ9477.
Signed-off-by: Tristram Ha
Signed-off-by: Marek Vasut
Cc: Andrew Lunn
Cc: David S. Miller
Cc: Florian Fainelli
Cc: Tristram Ha
Cc: Vi
From: Tristram Ha
Add Microchip KSZ8795 DSA driver.
Signed-off-by: Tristram Ha
Signed-off-by: Marek Vasut
Cc: Andrew Lunn
Cc: David S. Miller
Cc: Florian Fainelli
Cc: Tristram Ha
Cc: Vivien Didelot
Cc: Woojung Huh
---
V2: - Use reverse xmas tree for variable declaration
- Use BIT() m
--
--
Hello My Dear
Calvary Greetings in the name of the ALMIGHTY
I am Mrs Monica Gabriele from Switzerland I am married to Late
Mr.Gabriele Joseph who is a wealthy business man here in Burkina Faso
we were married for many years without a child before he died after a
brief illness. Before h
Attn Dear Atm Card beneficiary.
GOOD NEWS,
This is to inform you that i have paid the delivery fees for your ATM
Master Card
I paid it because our bank director stated that before, they
So contact Dr. William Roberts, Director DHL Courier
Company Benin to receive your delivery ATM Visa Card amount
From: "Matthew Wilcox (Oracle)"
I typo'd the conversion to skb_frag_t in the Octeon driver, but didn't
notice because you can only build it on MIPS, and the buildbots seem
overloaded right now.
So I've constructed some stubs which let me build it on x86. I'm sure
somebody could do a better job
From: "Matthew Wilcox (Oracle)"
Compile fix from skb_frag_t conversion.
Signed-off-by: Matthew Wilcox (Oracle)
---
drivers/staging/octeon/ethernet-tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/octeon/ethernet-tx.c
b/drivers/staging/octeon/ethernet-tx
From: "Matthew Wilcox (Oracle)"
Add compile test support by moving all includes of files under
asm/octeon into octeon-ethernet.h, and if we're not on MIPS,
stub out all the calls into the octeon support code in octeon-stubs.h
Signed-off-by: Matthew Wilcox (Oracle)
---
drivers/staging/octeon/Kc
ConnectX-3 Pro can offload transmission of VLAN packets with VXLAN inside:
enable tunnel offloads in dev->vlan_features, like it's done with other
NIC drivers (e.g. be2net and ixgbe).
It's no more necessary to change dev->hw_enc_features when VXLAN are added
or removed, since .ndo_features_check()
On Wed, 24 Jul 2019 09:18:38 +0100
Sergei Trofimovich wrote:
> On sys/queue.h does not exist linux-musl targets and
> fails build as:
>
> devlink.c:28:10: fatal error: sys/queue.h: No such file or directory
>28 | #include
> | ^
>
> The change pulls in
On Wed, 24 Jul 2019 21:12:18 +0200
Matteo Croce wrote:
> ip link can set parameters both via the 'set' and 'change' keyword.
> In fact, 'change' is an alias for 'set'.
> Document this in the help and manpage.
>
> Fixes: 1d93483985f0 ("iplink: use netlink for link configuration")
> Signed-off-by:
On Tue, 23 Jul 2019 21:36:00 +0200
Jiri Pirko wrote:
> Tue, Jul 23, 2019 at 07:54:01PM CEST, step...@networkplumber.org wrote:
> >On Tue, 23 Jul 2019 13:25:37 +0200
> >Jiri Pirko wrote:
> >
> >> From: Jiri Pirko
> >>
> >> One cannot depend on *argv being null in case of no arg is left on the
On July 26, 2019 8:25:14 PM GMT+02:00, Stephen Hemminger
wrote:
> On Wed, 24 Jul 2019 21:12:18 +0200
> Matteo Croce wrote:
>
> > ip link can set parameters both via the 'set' and 'change' keyword.
> > In fact, 'change' is an alias for 'set'.
> > Document this in the help and manpage.
> >
> > F
Align setting PME with the vendor driver. PMEnable is writable on
RTL8169 only, on later chip versions it's read-only. PME_SIGNAL is
used on chip versions from RTL8168evl with the exception of the
RTL8168f family.
Signed-off-by: Heiner Kallweit
---
drivers/net/ethernet/realtek/r8169_main.c | 8 +
On 24.07.2019 22:02, Heiner Kallweit wrote:
> On 24.07.2019 10:19, Jian-Hong Pan wrote:
>> Hi all,
>>
>> We have got a consumer desktop equipped with Realtek RTL8125 2.5GB
>> Ethernet [1] recently. But, there is no related driver in mainline
>> kernel yet. So, we can only use the vendor driver [2
ipv6_find_hdr() prints a non-rate limited error message
when it cannot find an ipv6 header at a specific offset.
This could be used as a DoS, so just remove it.
Signed-off-by: Jonathan Lemon
---
net/ipv6/exthdrs_core.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/ip
On Tue, 23 Jul 2019 13:25:37 +0200
Jiri Pirko wrote:
> From: Jiri Pirko
>
> One cannot depend on *argv being null in case of no arg is left on the
> command line. For example in batch mode, this is not always true. Check
> argc instead to prevent crash.
>
> Reported-by: Alex Kushnarov
> Fixes
This series:
- delegates more tasks from the driver to the core
- enables HW csum and TSO per default
- copies quirks for buggy chip versions from vendor driver
Heiner Kallweit (4):
r8169: set GSO size and segment limits
r8169: implement callback ndo_features_check
r8169: remove r8169_csum_w
Set GSO max size and max segment number as in the vendor driver.
Signed-off-by: Heiner Kallweit
---
drivers/net/ethernet/realtek/r8169_main.c | 13 -
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c
b/drivers/net/ethernet/realte
Implement callback ndo_features_check and move all feature checks there.
This will allow us to get rid of r8169_csum_workaround() completely in
a subsequent step. Like in the vendor driver disable HW csum for short
packets on RTL8168b.
Signed-off-by: Heiner Kallweit
---
drivers/net/ethernet/real
The loop in r8169_csum_workaround is called only if in
msdn_giant_send_check a copy of the skb header needs to be made and
we don't have enough memory. Let's simply drop the packet in that case
so that we can remove r8169_csum_workaround.
Signed-off-by: Heiner Kallweit
---
drivers/net/ethernet/r
Enable HW csum and TSO per default except on known buggy chip versions.
Realtek confirmed that RTL8168evl has a HW issue with TSO.
Signed-off-by: Heiner Kallweit
---
drivers/net/ethernet/realtek/r8169_main.c | 16 +++-
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/dr
This patch changes how test output is printed out. By default, if test
had no errors, the only output will be a single line with test number,
name, and verdict at the end, e.g.:
#31 xdp:OK
If test had any errors, all log output captured during test execution
will be output after test completes.
Expose each BPF verifier scale test as individual sub-test to allow
independent results output and test selection.
Test run results now look like this:
$ sudo ./test_progs -t verif/
#3/1 loop3.o:OK
#3/2 test_verif_scale1.o:OK
#3/3 test_verif_scale2.o:OK
#3/4 test_verif_scale3.o:OK
#3/
Make test_progs test runner own libbpf logging. Also introduce two
levels of verbosity: -v and -vv. First one will be used in subsequent
patches to enable test log output always. Second one increases verbosity
level of libbpf logging further to include debug output as well.
Signed-off-by: Andrii N
Apprently listing header as a normal dependency for a binary output
makes it go through compilation as if it was C code. This currently
works without a problem, but in subsequent commits causes problems for
differently generated test.h for test_progs. Marking those headers as
order-only dependency
Refactor test_progs to allow better control on what's being run.
Also use argp to do argument parsing, so that it's easier to keep adding
more options.
Signed-off-by: Andrii Nakryiko
---
tools/testing/selftests/bpf/Makefile | 8 +--
tools/testing/selftests/bpf/test_progs.c | 84
Convert send_signal set of tests to be exposed as three sub-tests.
Signed-off-by: Andrii Nakryiko
---
tools/testing/selftests/bpf/prog_tests/send_signal.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal.c
b/tools/te
Hi Yonghong Song,
On Fri, Jul 26, 2019 at 5:45 PM Yonghong Song wrote:
>
>
>
> On 7/26/19 1:26 AM, Sedat Dilek wrote:
> > Hi,
> >
> > I have opened a new issue in the ClangBuiltLinux issue tracker.
>
> Glad to know clang 9 has asm goto support and now It can compile
> kernel again.
>
Yupp.
> >
This patch set makes a number of changes to test_progs selftest, which is
a collection of many other tests (and sometimes sub-tests as well), to provide
better testing experience and allow to start convering many individual test
programs under selftests/bpf into a single and convenient test runner.
libbpf_swap_print allows to restore previously set print function.
This is useful when running many independent test with one default print
function, but overriding log verbosity for particular subset of tests.
Signed-off-by: Andrii Nakryiko
---
tools/lib/bpf/libbpf.c | 8
tools/lib/b
Add ability to specify either test number or test name substring to
narrow down a set of test to run.
Usage:
sudo ./test_progs -n 1
sudo ./test_progs -t attach_probe
Signed-off-by: Andrii Nakryiko
---
tools/testing/selftests/bpf/test_progs.c | 43 +---
1 file changed, 39 ins
Allow tests to have their own set of sub-tests. Also add ability to do
test/subtest selection using `-t /` and `-n
/`, as an extension of existing -t/-n
selector options. For the format: it's a comma-separated
list of either individual test numbers (1-based), or range of test
numbers. E.g., all of
Em Thu, Jul 18, 2019 at 10:30:21AM -0700, Andrii Nakryiko escreveu:
> hashmap.h depends on __WORDSIZE being defined. It is defined by
> glibc/musl in different headers. It's an explicit goal for musl to be
> "non-detectable" at compilation time, so instead include glibc header if
> glibc is explici
On Thu, 2019-07-25 at 16:27 +0200, Antoine Tenart wrote:
> This patch adds support for PTP Hardware Clock (PHC) to the Ocelot
> switch for both PTP 1-step and 2-step modes.
>
> Signed-off-by: Antoine Tenart
> ---
> drivers/net/ethernet/mscc/ocelot.c | 394
> ++-
> drive
sys/queue.h does not exist on linux-musl targets and fails build as:
devlink.c:28:10: fatal error: sys/queue.h: No such file or directory
28 | #include
| ^
The change ports to list.h API and drops dependency of 'sys/queue.h'.
The API maps one-to-one.
Bu
From: René van Dorst
Date: Wed, 24 Jul 2019 21:23:40 +0200
> @@ -186,165 +187,219 @@ static void mtk_gmac0_rgmii_adjust(struct mtk_eth
> *eth, int speed)
> mtk_w32(eth, val, TRGMII_TCK_CTRL);
> }
>
> -static void mtk_phy_link_adjust(struct net_device *dev)
> +static void mtk_mac_config(
On Fri, Jul 26, 2019 at 10:38 PM Sedat Dilek wrote:
>
> Hi Yonghong Song,
>
> On Fri, Jul 26, 2019 at 5:45 PM Yonghong Song wrote:
> >
> >
> >
> > On 7/26/19 1:26 AM, Sedat Dilek wrote:
> > > Hi,
> > >
> > > I have opened a new issue in the ClangBuiltLinux issue tracker.
> >
> > Glad to know clan
On 7/26/19 1:38 PM, Sedat Dilek wrote:
> Hi Yonghong Song,
>
> On Fri, Jul 26, 2019 at 5:45 PM Yonghong Song wrote:
>>
>>
>>
>> On 7/26/19 1:26 AM, Sedat Dilek wrote:
>>> Hi,
>>>
>>> I have opened a new issue in the ClangBuiltLinux issue tracker.
>>
>> Glad to know clang 9 has asm goto support
From: Jia-Ju Bai
Date: Thu, 25 Jul 2019 17:20:21 +0800
> @@ -223,7 +223,8 @@ static void tipc_publ_purge(struct net *net, struct
> publication *publ, u32 addr)
> publ->key);
> }
>
> - kfree_rcu(p, rcu);
> + if (p)
> + kfree_rcu(p, rcu);
Please fi
From: Michal Kalderon
Date: Thu, 25 Jul 2019 13:59:55 +0300
> The hw_ver field was initialized to zero. Return the chip revision.
> This is relevant for rdma driver.
>
> Signed-off-by: Michal Kalderon
Applied.
From: René van Dorst
Date: Wed, 24 Jul 2019 21:25:49 +0200
> @@ -1167,6 +1236,10 @@ mt7530_setup(struct dsa_switch *ds)
> u32 id, val;
> struct device_node *dn;
> struct mt7530_dummy_poll p;
> + phy_interface_t interface;
> + struct device_node *mac_np;
> + struct de
On Fri, 2019-07-26 at 12:39 +0200, Davide Caratti wrote:
> On Thu, 2019-07-25 at 21:27 +, Saeed Mahameed wrote:
> > On Thu, 2019-07-25 at 14:25 +0200, Davide Caratti wrote:
> > > On Wed, 2019-07-24 at 20:47 +, Saeed Mahameed wrote:
> > > > On Wed, 2019-07-24 at 16:02 +0200, Davide Caratti w
From: Arnd Bergmann
Date: Thu, 25 Jul 2019 13:08:18 +0200
> On Wed, Jul 24, 2019 at 1:37 PM Matthew Wilcox wrote:
>>
>> From: "Matthew Wilcox (Oracle)"
>>
>> I missed a few places. One is in some ifdeffed code which will probably
>> never be re-enabled; the others are in drivers which can't cu
On 7/26/19 2:02 PM, Sedat Dilek wrote:
> On Fri, Jul 26, 2019 at 10:38 PM Sedat Dilek wrote:
>>
>> Hi Yonghong Song,
>>
>> On Fri, Jul 26, 2019 at 5:45 PM Yonghong Song wrote:
>>>
>>>
>>>
>>> On 7/26/19 1:26 AM, Sedat Dilek wrote:
Hi,
I have opened a new issue in the ClangBuiltLi
From: Claudiu Manoil
Date: Thu, 25 Jul 2019 16:33:18 +0300
> Make sure the delayed work for stats update is not pending before
> wq destruction.
> This fixes the module unload path.
> The issue is there since day 1.
>
> Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
>
> Si
On Fri, Jul 26, 2019 at 11:10 PM Yonghong Song wrote:
>
>
>
> On 7/26/19 2:02 PM, Sedat Dilek wrote:
> > On Fri, Jul 26, 2019 at 10:38 PM Sedat Dilek wrote:
> >>
> >> Hi Yonghong Song,
> >>
> >> On Fri, Jul 26, 2019 at 5:45 PM Yonghong Song wrote:
> >>>
> >>>
> >>>
> >>> On 7/26/19 1:26 AM, Seda
From: Subash Abhinov Kasiviswanathan
Date: Thu, 25 Jul 2019 12:07:12 -0600
> The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets
> so that the hardware can flip the checksum to 0x if the computed
> checksum is 0 per RFC768.
>
> However, this bit had to be set for IPv6 UDP non
On 07/26, Andrii Nakryiko wrote:
> Apprently listing header as a normal dependency for a binary output
> makes it go through compilation as if it was C code. This currently
> works without a problem, but in subsequent commits causes problems for
> differently generated test.h for test_progs. Markin
From: Andy Shevchenko
Date: Thu, 25 Jul 2019 22:35:08 +0300
> The macro had never been used.
>
> Signed-off-by: Andy Shevchenko
> Tested-by: Sedat Dilek
...
> @@ -12,8 +12,6 @@
> * Copyright (C) 2012 Intel Corporation. All rights reserved.
> */
>
> -#define pr_fmt(fmt) KBUILD_MODNAME "
Libbpf stores associated BTF FD per each instance of bpf_program. When
program is unloaded, that FD is closed. This is wrong, because leads to
a race and possibly closing of unrelated files, if application
simultaneously opens new files while bpf_programs are unloaded.
It's also unnecessary, becau
On 07/26, Andrii Nakryiko wrote:
> Add ability to specify either test number or test name substring to
> narrow down a set of test to run.
>
> Usage:
> sudo ./test_progs -n 1
> sudo ./test_progs -t attach_probe
>
> Signed-off-by: Andrii Nakryiko
> ---
> tools/testing/selftests/bpf/test_progs.c
From: Sergej Benilov
Date: Thu, 25 Jul 2019 21:48:06 +0200
> Implement ethtool's EEPROM dump command (ethtool -e|--eeprom-dump).
>
> Thx to Andrew Lunn for comments.
>
> Signed-off-by: Sergej Benilov
Applied to net-next.
On 07/26, Andrii Nakryiko wrote:
> libbpf_swap_print allows to restore previously set print function.
> This is useful when running many independent test with one default print
> function, but overriding log verbosity for particular subset of tests.
Can we change the return type of libbpf_set_print
On Fri, Jul 19, 2019 at 07:52:26PM +, René van Dorst wrote:
> Hi Russel,
>
> If I use this patch below:
>
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 5d0af041b8f9..a6aebaa14338 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -21
On 07/26, Andrii Nakryiko wrote:
> This patch changes how test output is printed out. By default, if test
> had no errors, the only output will be a single line with test number,
> name, and verdict at the end, e.g.:
>
> #31 xdp:OK
>
> If test had any errors, all log output captured during test
From: Saeed Mahameed
Date: Thu, 25 Jul 2019 20:36:32 +
> This series introduces some fixes to mlx5 driver.
>
> 1) Ariel is addressing an issue with enacp flow counter race condition
> 2) Aya fixes ethtool speed handling
> 3) Edward fixes modify_cq hw bits alignment
> 4) Maor fixes RDMA_RX c
On Tue, 23 Jul 2019 13:25:38 +0200
Jiri Pirko wrote:
> From: Jiri Pirko
>
> When getcmdline fails, there is no valid string in line_next.
> So change the flow and don't process it. Alongside with that,
> free the previous line buffer and prevent memory leak.
>
> Fixes: 485d0c6001c4 ("tc: Add b
On Thu, 2019-07-25 at 21:48 +0200, Sergej Benilov wrote:
> Implement ethtool's EEPROM dump command (ethtool -e|--eeprom-dump).
>
> Thx to Andrew Lunn for comments.
>
> Signed-off-by: Sergej Benilov
> ---
> drivers/net/ethernet/sis/sis900.c | 68
> +++
> 1 file change
On Thu, 2019-07-25 at 13:49 -0700, Jakub Kicinski wrote:
> On Thu, 25 Jul 2019 20:36:48 +, Saeed Mahameed wrote:
> > From: Tariq Toukan
> >
> > A netdev mismatch in the processed TLS SKB should not occur,
> > and indicates a kernel bug.
> > Add WARN_ONCE to spot such cases.
> >
> > Fixes: d2
On Fri, Jul 26, 2019 at 2:21 PM Stanislav Fomichev wrote:
>
> On 07/26, Andrii Nakryiko wrote:
> > Apprently listing header as a normal dependency for a binary output
> > makes it go through compilation as if it was C code. This currently
> > works without a problem, but in subsequent commits caus
1 - 100 of 130 matches
Mail list logo
