[PATCH net-next] r8169: align setting PME with vendor driver

[Heiner Kallweit]

Align setting PME with the vendor driver. PMEnable is writable on
RTL8169 only, on later chip versions it's read-only. PME_SIGNAL is
used on chip versions from RTL8168evl with the exception of the
RTL8168f family.

Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
 drivers/net/ethernet/realtek/r8169_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c 
b/drivers/net/ethernet/realtek/r8169_main.c
index e1e1c89fb..5c337234b 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -1414,18 +1414,22 @@ static void __rtl8169_set_wol(struct rtl8169_private 
*tp, u32 wolopts)
        }
 
        switch (tp->mac_version) {
-       case RTL_GIGA_MAC_VER_02 ... RTL_GIGA_MAC_VER_17:
+       case RTL_GIGA_MAC_VER_02 ... RTL_GIGA_MAC_VER_06:
                options = RTL_R8(tp, Config1) & ~PMEnable;
                if (wolopts)
                        options |= PMEnable;
                RTL_W8(tp, Config1, options);
                break;
-       default:
+       case RTL_GIGA_MAC_VER_34:
+       case RTL_GIGA_MAC_VER_37:
+       case RTL_GIGA_MAC_VER_39 ... RTL_GIGA_MAC_VER_51:
                options = RTL_R8(tp, Config2) & ~PME_SIGNAL;
                if (wolopts)
                        options |= PME_SIGNAL;
                RTL_W8(tp, Config2, options);
                break;
+       default:
+               break;
        }
 
        rtl_lock_config_regs(tp);
-- 
2.22.0