le}"
mflag -F "${mailfile}" > /dev/null 2>&1
fi
fi
done < <(find ~/Mail/To-do -type f -print)
It adds a custom header X-TODO, based on which I mark respective
messages with color:
color index white red "~h '^X-TODO: OVERDUE$'"
To prop
int something
different depending on what it was.
But that's where I run out of ideas. I don't *think* you can embed ANSI color
commands in the index format, and I don't know of a way to run shell commands
in the pattern for color commands.
Maybe this inspires someone else that
Hi all,
I have some messages with a subject line containing the "due:[here
goes some date]" text. I want mutt to color these messages differently
and dynamically (at every opening or refreshing the mailbox) according
to whether the date in the subject is in the past or the future
com
ever, after cataract surgery I'm considering using a dark
> > > background scheme.
> > >
> > > Has anyone a technique for defining multiple color schemes and
> > > toggling among them while using mutt?
While talking about colors, I'd like to suggest to have a
hlight=mail -P PDF -a 1"
set ?print_command
So each redefines ^P to source the *next* one in the round-robin. When
sourced, it changes, then echos, the print_command, to remind me where I am in
the rotation. Probably not needed for something immediately visible like the
color scheme.
--
Ed Blackman
* Jon LaBadie [2021-09-08 01:20:27 -0400]:
I've always preferred a black letters on white background scheme.
However, after cataract surgery I'm considering using a dark
background scheme.
Has anyone a technique for defining multiple color schemes and
toggling among them while usin
heme.
> > > However, after cataract surgery I'm considering using a dark
> > > background scheme.
> > >
> > > Has anyone a technique for defining multiple color schemes and
> > > toggling among them while using mutt?
> > >
> > >
y I'm considering using a dark
background scheme.
Has anyone a technique for defining multiple color schemes and
toggling among them while using mutt?
I already keep my color scheme in a separate file and source
that file from ~/.muttrc. To extend that, I created two
files for light and dark s
s anyone a technique for defining multiple color schemes and
toggling among them while using mutt?
I already keep my color scheme in a separate file and source
that file from ~/.muttrc. To extend that, I created two
files for light and dark schemes and separate macros (,l and ,d)
to source them while ru
hnique for defining multiple color schemes and
toggling among them while using mutt?
I already keep my color scheme in a separate file and source
that file from ~/.muttrc. To extend that, I created two
files for light and dark schemes and separate macros (,l and ,d)
to source them while running mutt.
I
On Wed, Sep 08, 2021 at 01:20:27AM -0400, Jon LaBadie wrote:
I've always preferred a black letters on white background scheme.
However, after cataract surgery I'm considering using a dark
background scheme.
Has anyone a technique for defining multiple color schemes and
toggling among
On Wed, Sep 08, 2021 at 01:20:27AM -0400, Jon LaBadie wrote:
> I've always preferred a black letters on white background scheme.
> However, after cataract surgery I'm considering using a dark
> background scheme.
>
> Has anyone a technique for defining multiple col
I've always preferred a black letters on white background scheme.
However, after cataract surgery I'm considering using a dark
background scheme.
Has anyone a technique for defining multiple color schemes and
toggling among them while using mutt?
I already keep my color scheme in
document.dump.color_mode to 0, which disables color and basically sets
monochrome mode. document.colors.use_document_colors 0 and 1 have the same
light gray text but no highlighting.
nks for html display
>
> text/html; /usr/bin/elinks -localhost 1 -no-connect 1 -force-html
> -dump '%s' ; copiousoutput
>
> The terminal is gnome-terminal which defaults to TERM=xterm, supports
> 80 colors according to tput, and muttrc sources a terminal-specific
> file wi
-connect 1 -force-html -dump '%s' ;
copiousoutput
The terminal is gnome-terminal which defaults to TERM=xterm, supports 80 colors
according to tput, and muttrc sources a terminal-specific file with color
settings the original source of which I don't remember.
color header red
On Tue, Apr 27, 2021 at 08:04:48AM +1000, Cameron Simpson wrote:
On 26Apr2021 16:32, Jon LaBadie wrote:
I can't figure out the correct configuration for my desired
3 color scheme for the index.
I can get New messages one color and Read messages a second.
My third color would be for de
On 26Apr2021 16:32, Jon LaBadie wrote:
>I can't figure out the correct configuration for my desired
>3 color scheme for the index.
>
>I can get New messages one color and Read messages a second.
>
>My third color would be for deleted messages. It works fine
>for Read
I can't figure out the correct configuration for my desired
3 color scheme for the index.
I can get New messages one color and Read messages a second.
My third color would be for deleted messages. It works fine
for Read messages that are deleted, but has no affect on New
messages. They
Quoting Francesco Ariis from 02 Mar (a Tuesday in 2021) at 0335 hours...
> Il 01 marzo 2021 alle 17:37 M.R.P. zensky ha scritto:
> > Hello running ubuntu linux have mutt installed and I am wondering
> > if I can change the color scheme?
>
> Sure! The `color` directive is use
Il 01 marzo 2021 alle 17:37 M.R.P. zensky ha scritto:
> Hello running ubuntu linux have mutt installed and I am wondering
> if I can change the color scheme?
Sure! The `color` directive is used like
color indicator yellow black
and does what you ask. More info:
http://www.mutt.o
Hello running ubuntu linux have mutt installed and I am wondering if I can
change the color scheme?
Hi Matthias,
that might be:
color compose header fgcolor bgcolor
Best,
JJ
On 2020-12-07 08:01, Matthias Apitz wrote:
Hello,
I'm struggling with a color problem in mutt 2.0.2: In the last menu
before sending the
Hello,
I'm struggling with a color problem in mutt 2.0.2: In the last menu
before sending the mail:
-
y:Send q:Abort t:To c:CC s:Subj a:Attach file d:Descrip ?:Help
From: Matthias Apitz
To: Matthias
I have downloaded latest 1.12.2 via Homebrew. And when I launched, all
colours were gone. Have the defaults changed in 1.12.2?
--
Pankaj Jangid
oking mutt with an empty
config file (as I have a .muttrc with color statements already):
touch .argaerg
mutt -F .argaerg
Have you tried copying the supplied sample.muttrc to $HOME/.muttrc and then
running mutt? It'll at least show you colour if $TERM is xterm-256color
If you installe
On Thu, Aug 22, 2019 at 08:14:28PM EDT, Tim Chase wrote:
> I'm a bit stuck trying to figure out why colors aren't working for me
> on FreeBSD (where I understand that termcap is used rather than
> terminfo).
According to the configure script it appears all you need for color is
$ echo $TERM
xterm-256color
$ tput Co pa
256
32767
Attempting to set the color in mutt with
color status blue white
works as expected on my Linux boxes but does nothing on my FreeBSD
box.
Colors work fine in vim and weechat. Likewise
$ tput AF 4; echo hello ; tput me
works, as does
On 07Feb2018 20:35, Scott Kostyshak wrote:
Example (untested):
message-hook . 'set my_hdr_colour=green'
message-hook ~p!~l 'set my_hdr_colour=yellow'
message-hook . 'color header $my_hdr_colour default'
so that a colour is chosen per message, then applied to
On Wed, Feb 07, 2018 at 10:00:33PM +, Cameron Simpson wrote:
> On 07Feb2018 01:05, Scott Kostyshak wrote:
> > I would like to color all header lines in the pager if a message pattern
> > matches.
> >
> > As an example, I can use the following to color the index i
On 07Feb2018 01:05, Scott Kostyshak wrote:
I would like to color all header lines in the pager if a message pattern
matches.
As an example, I can use the following to color the index if a message
was sent to me and not sent to a list:
color index yellow black ~p!~l
But I cannot do the
I would like to color all header lines in the pager if a message pattern
matches.
As an example, I can use the following to color the index if a message
was sent to me and not sent to a list:
color index yellow black ~p!~l
But I cannot do the following:
color header yellow black ~p!~l
to
On Sun, Feb 12, 2017 at 06:22:20PM +0100, ilf wrote:
> Kevin J. McCarthy:
> > > I am trying to color the "Security:" line in the compose menu. Is
> > > that possible?
> > Sorry ilf, that part is not currently colorable.
>
> Okay, that's what I assum
Kevin J. McCarthy:
I am trying to color the "Security:" line in the compose menu. Is that
possible?
Sorry ilf, that part is not currently colorable.
Okay, that's what I assumed.
What do you think of this idea? Does it sound useful to you?
I for one would really like a colo
On Sat, Feb 11, 2017 at 04:29:01PM +0100, ilf wrote:
> I am trying to color the "Security:" line in the compose menu. Is that
> possible?
Sorry ilf, that part is not currently colorable.
--
Kevin J. McCarthy
GPG Fingerprint: 8975 A9B3 3AA3 7910 385C 5308 ADEF 7684 8031 6BDA
I am trying to color the "Security:" line in the compose menu. Is that
possible?
In the manual, I cannot find "compose" in "object":
http://www.mutt.org/doc/manual/#color
So, something like this does not work:
color compose red default "None"
co
revious example works with LKML and g...@vger.kernel.org
It also works on perl5-port...@perl.org where patches are sent
as attachments.
color body cyan black ^[+].*$
color body magenta black ^-.*$
Hi Steve,
On 21-06-2016 13:17:59, steve wrote:
> I use colordiff.
>
> In my ~/.mailcap, I have
>
> text/x-diff; cat %s | colordiff; copiousoutput
> text/x-patch; cat %s | colordiff; copiousoutput
>
That sounds nice, though it does not work for example for the LKML...
(which isn't your fau
Hi Matthias,
I use colordiff.
In my ~/.mailcap, I have
text/x-diff; cat %s | colordiff; copiousoutput
text/x-patch; cat %s | colordiff; copiousoutput
Best,
Steve
Matthias Beyer wrote:
> can someone tell me how to color diffs in a PATCH mail when viewing
> the mail contents with mutt?
I use the following:
color body cyan black ^[+].*$
color body magenta black ^-.*$
It's not perfect and highlights some things unnecessarily,
but
On 20.06.16 14:01, Matthias Beyer wrote:
> can someone tell me how to color diffs in a PATCH mail when viewing
> the mail contents with mutt?
>
> Is it even possible?
Dunno. Once a patch has been delivered, I figure we've left the email
world. But you could:
set editor=vi
Hi,
can someone tell me how to color diffs in a PATCH mail when viewing
the mail contents with mutt?
Is it even possible?
--
Mit freundlichen Grüßen,
Kind regards,
Matthias Beyer
Proudly sent with mutt.
Happily signed with gnupg.
signature.asc
Description: PGP signature
llo Xu,
> not tested but I'd play around with the patterns ~p and ~l (~p!~l
> maybe, adding ~c if you need carbon copies too).
> Once you tested your pattern (with, say, limit) and it does what expected,
> modify colouring with
>
> color index green black yourpattern
&g
need carbon copies too).
Once you tested your pattern (with, say, limit) and it does what expected,
modify colouring with
color index green black yourpattern
Ask again if you have troubles with patterns!
I am part of many mailing lists. I would like to know when:
1. I am CC'ed or in the To field of an email address
2. When (1) is true *and* there is no mailing list in the CC or To field.
(2) is specifically important to me because I need to be absolutely
sure I don't miss these emails and that I
Dear list,
is it possible to set the indicator color dependant on the message
status?
Just now, I have set in my .muttrc:
color indicator brightblack yellow# active line with cursor
color index bluedefault "~N" # new messages
If the indicator is on a new messag
names, color for HTML links, etc. w3m does this when it
displays the page
interactively, but not when the -dump switch is used. Lynx likewise dumps only
the plainest of plain text.
I know mutt can colorize portions of text/plain messages, but is there any text
format that mutt would recogni
On Sat, Jan 11, 2014 at 05:22:58AM +0100, Kim Christensen wrote:
> On Sat, Jan 11, 2014 at 05:16:51AM +0100, Kim Christensen wrote:
> > On Fri, Jan 10, 2014 at 10:41:57AM +0800, Techlive Zheng wrote:
> > > Hey,
> > >
> > > I want to highlight the parent message of a thread in index mode, how
> > >
On Sat, Jan 11, 2014 at 05:16:51AM +0100, Kim Christensen wrote:
> On Fri, Jan 10, 2014 at 10:41:57AM +0800, Techlive Zheng wrote:
> > Hey,
> >
> > I want to highlight the parent message of a thread in index mode, how
> > can I accomplish that?
>
> You could match for the following pattern:
>
>
On Fri, Jan 10, 2014 at 10:41:57AM +0800, Techlive Zheng wrote:
> Hey,
>
> I want to highlight the parent message of a thread in index mode, how
> can I accomplish that?
You could match for the following pattern:
!~h In-Reply-To:
This will only match non-replies (parent messages) and should wor
Hey,
I want to highlight the parent message of a thread in index mode, how
can I accomplish that?
Regards,
Techlive Zheng
Hi,
I am using the solarized mutt color scheme
(https://github.com/altercation/mutt-colors-solarized) with Mutt 1.5.21
as shipped on Ubuntu 12.10.
When I mark a collapsed thread as read (ctrl+r), the thread shows up as
being only partially read until I either save the mailbox or uncollapse
and
Mac 10.old (something less than 10.9) has a term type of
xterm-color. 10.9 splits that into xterm-16color and xterm-256color.
I tried various different TERM values and none of them clear up the
ESC and gray color, but my bet is now on the new Mac Term doing
something unfriendly. Since this 10.9 T
een
sessions.
It's not the new Mac's interpretation of the linux screen colors, I am
sure, because I have been using the new Mac for several days with the
same colors as with the old Mac. If this Mac change has any part in
the color change, it's in combination with the mutt change or
On Sat, Nov 30, 2013 at 12:25:42PM -0800, fe...@crowfix.com wrote:
> ...recently upgraded a few packages...
> ...
> Is this a known change in 1.5.22? What else could cause this change?
> I didn't see any 'color' notes in ChangeLog or NEWS.
The colors in mutt are AFA
I run mutt under gentoo, and recently upgraded a few packages, including mutt
to 1.5.22-r1 from 1.5.21-r12. I use the sidebar. Now mutt shows an odd
coloration. My color config is pretty simple:
color attachment black white
color body black white .
color bold black white
Stefan Wimmer wrote on Sat-09-Feb 13 10:57PM
> * Brendan Cully [2013-02-09 22:38]:
> >On Saturday, 09 February 2013 at 13:27, Gary Johnson wrote:
> >>On 2013-02-09, Brendan Cully wrote:
> >>
> >>>Elinks does work fine to view attachments in color. You can&#
* Brendan Cully [2013-02-09 22:38]:
On Saturday, 09 February 2013 at 13:27, Gary Johnson wrote:
On 2013-02-09, Brendan Cully wrote:
Elinks does work fine to view attachments in color. You can't get
color when autoviewing though -- in this case, the elinks output is
recolorized by the
On Saturday, 09 February 2013 at 13:27, Gary Johnson wrote:
> On 2013-02-09, Brendan Cully wrote:
>
> > Elinks does work fine to view attachments in color. You can't get
> > color when autoviewing though -- in this case, the elinks output is
> > recolorized by the
On 2013-02-09, Brendan Cully wrote:
> Elinks does work fine to view attachments in color. You can't get
> color when autoviewing though -- in this case, the elinks output is
> recolorized by the pager using color body rules, which mangle the
> underlying color.
Even if
eople. Recently,
> > while in the chaos ahead of a deadline I missed some
> > important email where answers to my questions where inserted
> > inline in a red color.
> >
> > I have never managed to render color in html email, how is this
> > possible?
>
> T
mail where answers to my questions where inserted
> inline in a red color.
>
> I have never managed to render color in html email, how is this
> possible?
This is a function of the external program used to render HTML as
text. The two that seem to be the most popular, lynx and w3m, don
Am Fri, Feb 08, 2013 at 05:23:23PM +0100, Eric Smith wrote:
> I have never managed to render color in html email, how is this
> possible?
Yes, this is a question, which would interest me too. I also have
sometimes this problem.
--
:: Igor Sosa Mayor :: joseleopoldo1...@gma
Hi.
(For those deeply offended by manifestations of html in emails,
please look away now).
I mainly receive email from non-technical people. Recently,
while in the chaos ahead of a deadline I missed some
important email where answers to my questions where inserted
inline in a red color.
I have
On 2012-07-18 15:03:04 +0200, Dennis Guhl wrote:
> On Wed, Jul 18, 2012 at 08:27:50AM -0300, Leonardo M. Ramé wrote:
>
> [..]
>
> > color index yellow black "~r"
>
> >From the fine manual:
>
> ~r [MIN]-[MAX]messages with “date-received” in a D
On Wed, Jul 18, 2012 at 08:27:50AM -0300, Leonardo M. Ramé wrote:
[..]
> color index yellow black "~r"
>From the fine manual:
~r [MIN]-[MAX] messages with “date-received” in a Date range
~Q messages which have been replied to
Dennis
--
Dennis Guhl
() ascii
As the subject says, I would like to change the color of my responded
mails, those marked with an "r" at right side.
I've tried with the following, but ti didn't work:
color index yellow black "~r"
--
Leonardo M. Ramé
http://leonardorame.blogspot.com
Sometimes, we will see some embedded code in mail body.
I want to know is there a way to show syntax color for those embedded code.
Use external tool, or outside something. and so on.
Any way, don't make the implement method complex.
I know that vim can display corresponding syntax colo
On Tuesday 10/25/11 12:27:20 CST, du yang wrote:
> If you want to color mails from someone special, you can try the
> expression '~t x...@xyx.com' in color command. It is case-insensitive.
>
Sorry again. the expression should like this '~f x..
On Tuesday 10/25/11 12:06:10 CST, du yang wrote:
> On Tuesday 10/25/11 11:46:48 CST, stardiviner wrote:
> > I want to color one special mail in a thread from one mailing list.
> > for example:
> > Subject .
> > [r] `-> (I replied here)
> > | `-&
=> On [2011-10-25 11:46:48 +0800]:
stardiviner Said:
> I want to color one special mail in a thread from one mailing list.
> for example:
> Subject .
> [r] `-> (I replied here)
> | `->
> |
> `-> (someone replied me at here, I want to
On Tuesday 10/25/11 11:46:48 CST, stardiviner wrote:
> I want to color one special mail in a thread from one mailing list.
> for example:
> Subject .
> [r] `-> (I replied here)
> | `->
> |
> `-> (someone replied me at here, I want to color th
I want to color one special mail in a thread from one mailing list.
for example:
Subject .
[r] `-> (I replied here)
| `->
|
`-> (someone replied me at here, I want to color this mail in mutt color
theme)
how to do this ?
--
stardiviner GPG: 5D9F64D
Hello, all,
I've set most colors in mutt to red on black (for night vision
reasons), when I start mutt directly by
$ mutt
I get http://tx0.org/2qx but when I open it 'in a new tab' in screen via
$ screen -t 'mutt' mutt
I get the expected http://tx0.org/2qy
What on Earth can be going on?
S
I put subscribed mailing lists and color defining in two file. then source them
in muttrc.
I tested with this style: commit all of them, then remove commit a little by a
little.
Now I find which one causes this problem.
I define a color for mailing list in color define file.
{{
color index
Quoth stardiviner on Thursday, 23 June 2011:
> problem:
> my color scheme can work before. But not, it can not work any more. all of
> mails in index are white, and mail context are white too. weird.
> I set some colors about index and body.
> I know it is fucking bad to say &qu
problem:
my color scheme can work before. But not, it can not work any more. all of
mails in index are white, and mail context are white too. weird.
I set some colors about index and body.
I know it is fucking bad to say "weird".
Here is my muttrc config in github: https://github.com
That did the trick, thanks a million.
Also useful to know about the files in /etc
-Paul
On 30 May 2011 17:44, Jamie Paul Griffin wrote:
> just to add: the setting that would change the section of the pager
> shown in your picture is -
>
> color tilde
>
just to add: the setting that would change the section of the pager
shown in your picture is -
color tilde
,
> but below that is a kind of light grey:
>
> http://i.imgur.com/jTkcW.png
>
> I'm using Mutt 1.5.20 from the Ubuntu repos and here is my current
> color settings:
>
> color normal default default
> color index brightgreen default ~N
> color error red default
&
utt 1.5.20 from the Ubuntu repos and here is my current
color settings:
color normal default default
color index brightgreen default ~N
color error red default
color tree white default
color index brightblue default "~F"
color status white blue
color header brightyellow default &
On Tue, Jan 05, 2010 at 05:37:59PM +0900, Horacio Sanson wrote:
> Currently I am using the ivy league color theme from Aaron Toponce (see link
> below) with a couple of modifications to make it work in my transparent KDE
> Konsole.
>
> http://pthree.org/2008/10/22/ivy-league
caca, ansi, utf8 with ansi escapes etc.) but
none render the color correctly.
Could this be a problem with the configuration of mutt at compile time? The
output of 'mutt -v' is as follows:
`--> mutt -v
Mutt 1.5.21 (2010-09-15)
Copyright
On Wed, Jan 26, 2011 at 03:53:22PM +0100, Eric Smith wrote:
People more and more send html with their respnses in a different
color :(
Please let me have the maicap rule that can autodisplay these
html mails in color in the pager.
Put "text/html;links -force-html %s" or somethi
People more and more send html with their respnses in a different
color :(
Please let me have the maicap rule that can autodisplay these
html mails in color in the pager.
Thanks
--
- Eric Smith
On Sun, Nov 14, 2010 at 11:28:41AM -0400, Monte Stevens wrote:
> On Sun, Nov 14, 2010 at 02:57:52PM +0800, Yue Wu wrote:
> > As the title, I want to, say, highlight all messages with the subject
> > "vim" in folder "ml-r" in color red, how to define such a color?
On Sun, Nov 14, 2010 at 07:23:45AM -0800, Michael Elkins wrote:
On Sun, Nov 14, 2010 at 02:57:52PM +0800, Yue Wu wrote:
As the title, I want to, say, highlight all messages with the subject
"vim" in folder "ml-r" in color red, how to define such a color?
You can use the c
On Sun, Nov 14, 2010 at 02:57:52PM +0800, Yue Wu wrote:
> As the title, I want to, say, highlight all messages with the subject
> "vim" in folder "ml-r" in color red, how to define such a color?
Folder hooks and color can do that.
# For pager
folder-hook . 'co
On Sun, Nov 14, 2010 at 02:57:52PM +0800, Yue Wu wrote:
As the title, I want to, say, highlight all messages with the subject
"vim" in folder "ml-r" in color red, how to define such a color?
You can use the color command:
color { header | body } foreground background regex
List,
Hi!
As the title, I want to, say, highlight all messages with the subject
"vim" in folder "ml-r" in color red, how to define such a color?
--
Regards,
Yue Wu
Key Laboratory of Modern Chinese Medicines
Department of Traditional Chinese Medicine
China Pharmaceuti
f the issues being the load library dependencies.
On Sat, Sep 18, 2010 at 02:16:53PM +0200, Matthias Apitz wrote:
>
> Hello,
>
> I'm really with no clue and sorry if this stupid or a FAQ, but I can't
> get some of the color settings to work in mutt 1.15.9 :-(
&g
El día Sunday, September 19, 2010 a las 08:16:23AM +0200, g...@unixarea.de
escribió:
> El día Saturday, September 18, 2010 a las 04:37:06PM -0700, Chip Camden
> escribió:
>
> > Are you using more than 16 color specifications?
>
> No. The problem must be caused by the w
El día Saturday, September 18, 2010 a las 04:37:06PM -0700, Chip Camden
escribió:
> Are you using more than 16 color specifications?
No. The problem must be caused by the way the FreeBSD's port is
compiling (or patching) the source. If I run ./configure --enable-smtp
by hand the co
Are you using more than 16 color specifications?
Quoth Matthias Apitz on Saturday, 18 September 2010:
> El día Saturday, September 18, 2010 a las 02:16:53PM +0200, Matthias Apitz
> escribió:
>
> >
> > Hello,
> >
> > I'm really with no clue and sorr
El día Saturday, September 18, 2010 a las 02:16:53PM +0200, Matthias Apitz
escribió:
>
> Hello,
>
> I'm really with no clue and sorry if this stupid or a FAQ, but I can't
> get some of the color settings to work in mutt 1.15.9 :-(
>
> What does work is:
>
Hello,
I'm really with no clue and sorry if this stupid or a FAQ, but I can't
get some of the color settings to work in mutt 1.15.9 :-(
What does work is:
set color_after_eol=no
color status brightgreen blue
color indicator brightyellow red
color normal black white
What does not wo
ectly with header and footer inverse
> and the index bar being visible.
>
> Typically the outbox does not show messages based on my
> color highlighting rules, but based on prior behavor things
> are looking good.
>
> I ran into what I suspect is a syntax error with the in
does not show messages based on my
color highlighting rules, but based on prior behavor things
are looking good.
I ran into what I suspect is a syntax error with the inbox
when I invoke mutt with no arguments.
Bad IDN "imaps.wadsworth.org".
.muttrc file beings this way.
[curie] ~
Quoth Brian Cuttler on Wednesday, 01 September 2010:
> Chip,
>
> > curie's mutt is built with slang, nnewton's is built with ncurses. That
> > probably accounts for the difference.
>
> I finally got a download of a newer mutt version from sunfreeware
> and will install it on the Solaris x86 plat
Chip,
> curie's mutt is built with slang, nnewton's is built with ncurses. That
> probably accounts for the difference.
I finally got a download of a newer mutt version from sunfreeware
and will install it on the Solaris x86 platform.
Assuming that its also built with slang - do you know what
1 - 100 of 707 matches
Mail list logo
