On Sun, Jun 16, 2024 at 03:52:08PM +, Martin wrote:
> Hi,
>
> On 2024-06-16 17:00, Dylan Van Assche wrote:
> > It would be useful to mention the name of the modem and manufacturer
> > as a lot of modems identify themselves as QUALCOMM INCORPORATED, even
> > though they are made by other manufa
On Mon, Jun 05, 2023 at 11:25:13AM +0200, Aleksander Morgado wrote:
> Hey Pradeep,
>
> > We are using Quactel RM520N in openwrt using ModemManager(1.16) ,
> > is there any way to select or list firmware on the module using mmcli .
> > For eg: In EM74xx we can use IMPREF to select image for carrier
lacks support for several newer 5G SA features which the forthcoming
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/mbimex-4.0-5g-sa-phase-2-support
provides.
Regards,
Reinhard
>
> On Tue, 5 Jul 2022 at 17:51, Reinhard Speyerer wrote:
>
> > Aleksander
Aleksander Morgado wrote:
> Hey,
>
> On Sun, Jul 3, 2022 at 2:16 AM Brendan Simon wrote:
> >
> > Ok, so I might have to talk to Quectel to see what is going on and if there
> > are alternative options.
> >
> > I'm thinking that I'll have to bite the bullet and build ModemManager
> > myself wit
On Wed, Jun 22, 2022 at 09:48:00PM -0400, Chris Talbot wrote:
> Hello!
>
> I am trying to debug a VoLTE issue with the BM818. I am using T-Mobile USA
> with VoLTE enabled on the BM818, with a Librem 5, PureOS Byzantium
> (based on Debian Bullseye).
>
> With certain numbers, I have seen that the
On Wed, Jun 15, 2022 at 09:12:22PM +0200, Aleksander Morgado wrote:
> > > > Is there a similar command or NM setting to set the modem UE Usage
> > > > Setting to data-centric mode?
> > > > Equivalent to: AT+QNVFW="/nv/item_files/modem/mmode/ue_usage_setting",01
> > > >
> > > > That command came f
Aleksander Morgado wrote:
> Hey!
>
> >
> > Is there an equivalent setting in the NetworkManager system connection
> > configuration file for --
> > 3gpp-set-initial-eps-bearer-settings='apn=something' ?
> >
>
> No, there is no such thing. There's a bit of a grey line between what
> NM should or
On Wed, Aug 04, 2021 at 09:37:04AM +0200, Aleksander Morgado wrote:
> Hey Reinhard,
>
> > > > I've been testing with all my modems for the next 1.18 release, and
> > > > for the QMI and MBIM ones I've done tests with and without
> > > > multiplexing support (i.e. connecting normally as we did unti
Hi Aleksander, hi Daniele,
On Tue, Aug 03, 2021 at 12:23:37PM +0200, Daniele Palmas wrote:
> Hi Aleksander,
>
> Il giorno lun 2 ago 2021 alle ore 16:41 Aleksander Morgado <
> aleksan...@aleksander.es> ha scritto:
>
> > Hey all,
> >
> > I've been testing with all my modems for the next 1.18 relea
On Fri, Jun 18, 2021 at 08:59:25AM +, Amol Lad wrote:
> Thanks. I'll share the output as soon as I'll receive the device.
>
> I think the device IDs needs to be inserted in qcserial.c also?
>
Hi Amol,
the corresponding kernel patch has been submitted here by another EM919x user:
https://lo
On Tue, Apr 27, 2021 at 02:10:12PM +0200, Bjørn Mork wrote:
> Reinhard Speyerer writes:
>
> > On Mon, Apr 26, 2021 at 06:23:01PM +0200, Bjørn Mork wrote:
> >> Bjørn Mork writes:
> >>
> >> > Sorry, i do not think these issues are related to ModemMana
On Mon, Apr 26, 2021 at 06:23:01PM +0200, Bjørn Mork wrote:
> Bjørn Mork writes:
>
> > Sorry, i do not think these issues are related to ModemManager at all.
>
> This is a test from freshly booted modem, MM not running:
>
> [...]
> root@finn:~# qmicli -p -d /dev/cdc-wdm0 --client-no-release-cid
On Wed, Feb 03, 2021 at 03:38:24PM -0600, Rusty Nails wrote:
> im having an issue in windows and linux/modemmanager with this rm510q. It
> seems to start up then stop allowing at commands. any tips on how to
> resolve this?
>
> [93736.682684] option1 ttyUSB3: GSM modem (1-port) converter now
> d
On Fri, Oct 16, 2020 at 08:46:30AM +, Federico Murciano wrote:
> Hi all,
>
>
> We are trying to set up a standalone connection between our Quectel Modem
> RG500QEA_VH or RM500 but after inserting the SIM card we dont receive any
> signal. Do we need to make some special configuration for us
On Tue, Sep 29, 2020 at 02:40:31PM +, Federico Murciano wrote:
> Si Sebastian,
>
> When I run the at+qeng=???servingcell??? command with mmcli as:
>
> sudo mmcli -m 0 --command=at+qeng=???servingcell???
>
> I get the following error:
>
> GDBus.Error:org.freedesktop.ModemManager1.Error.Conn
On Tue, Jul 07, 2020 at 03:16:09PM +0200, Reinhard Speyerer wrote:
> On Tue, Jul 07, 2020 at 01:56:34PM +0200, Fredrik Flornes Ellertsen wrote:
> [...]
> > <<<<<< TLV:
> > <<<<<< type = 0x25
> > <<<<<< length = 8
&
On Tue, Jul 07, 2020 at 01:56:34PM +0200, Fredrik Flornes Ellertsen wrote:
> Hi,
>
> We are having trouble with band selection on the Quectel BG96. It seems the
> band selection command executes successfully, but the modem always stays on
> LTE band 20 regardless of the band selection preference.
On Mon, Jun 22, 2020 at 06:51:50AM +, Wassenberg, Dennis wrote:
> Hi all,
>
> I tested the PCI approach.
>
> Unfortunately I had no luck. The kernel PCI driver at
> https://github.com/xmm7360/xmm7360-pci can not initiale the modem
> correctly. The modem stays at status=0xfeedb007. This seems
On Sat, Jun 13, 2020 at 10:35:51PM +0800, Leo K wrote:
> Hi all,
>
> I'm trying to enable the LTE-FDD bands but getting the following error:
>
> [...]
> pi@okamoto:~ $ sudo mmcli -m 0
> --set-current-bands='egsm|dcs|utran-1|utran-8|eutran-1|eutran-3|eutran-8|eutran-38|eutran-39|eutran-40|eutran-4
ight also be possible to enable QMI NASSignalInfoIndication
in libqmi provided that NR5G-specific TLVs also exist there and you trust
my interpretation of their semantics...
Regards,
Reinhard
> >
> >
> > > On 10 Jun 2020, at 3:12 am, Reinhard Speyerer wrote:
&g
On Tue, Jun 09, 2020 at 08:50:10AM +1000, Nick wrote:
> Hi Walter,
>
> I???m seeing a similar issue with my RM500Q-GL. Can you please post the
> output of: qmicli -p -d /dev/cdc-wdm0 --dms-get-band-capabilities
>
> Mine below for your reference. You would note on mine, after the Extended
> LT
On Mon, May 11, 2020 at 06:56:53PM -0500, Alex Ballmer wrote:
> Hi there,
>
> I am trying to get a quectel RM500Q modem working using modemmanager
> 1.12.10 on openwrt 18.06.2. Since the device I am on uses a 4.14
> kernel, I manually backported the following changes from linux upstream
> to allow
On Fri, Aug 23, 2019 at 06:59:59AM +1000, Nick wrote:
> Hi Reinhard,
>
> Thanks, I am using your latest libqmi patch, and latest MM patches. No more
> crashes or off-by-one???s from by qmicli, but MM is still showing eutran-32
> as a supported band of the MC7430. I have reset the MC7430 to RMA
On Wed, Aug 21, 2019 at 07:15:28AM +1000, Nick wrote:
> Hi Reinhard,
>
> Yes you are right, I double checked the supported bands afterwards and 32 is
> not one of them. The issue was that mmcli had reported eutran-32 as a
> supported band. I also know that normally both mmcli and qmicli would
On Tue, Aug 20, 2019 at 03:02:01PM +1000, Nick wrote:
> Some further information: It seems if I try to set any band above 28, such
> as eutran-32 the command fails. This is on a MC7430.
>
> Command
> ~# mmcli -m 0
> --set-current-bands="eutran-3|eutran-5|eutran-7|eutran-8|eutran-18|eutran-19|e
For devices which do not provide feature_extended_lte_band_preference
mm_modem_bands_to_qmi_band_preference() gets called from
mm_shared_qmi_set_current_bands() with extended_qmi_lte_bands
set to NULL which may cause a SIGSEGV in the memset() call in
mm_modem_bands_to_qmi_band_preference().
Avoid
On Sun, Aug 18, 2019 at 11:07:27AM +1000, Nick wrote:
> Hey Reinhard,
>
> Thanks for the tip! I made some additions, see the patch inline. It now
> displays eutran-28 in the mmcli output but whenever I try to use
> ???set-allowed-bands with any set of bands I get a page fault.
Hi Nicholas,
g
Add the missing QMI LTE bands 26 to 32 to nas_lte_bands_map to make them
usable in ModemManager.
---
diff --git a/src/mm-modem-helpers-qmi.c b/src/mm-modem-helpers-qmi.c
index 86e1803b..c66f90d6 100644
--- a/src/mm-modem-helpers-qmi.c
+++ b/src/mm-modem-helpers-qmi.c
@@ -472,6 +472,13 @@ static con
On Sat, Aug 17, 2019 at 04:29:22PM +1000, Nick wrote:
> Hey Aleksander,
>
> Just tried it with MM 1.10.4 and libqmi 1.22.4, but still not seeing
> eutran-28 in the mmcli output. It???s still there in the qmicli output
> though. I have had a look at mm-enums-types.c, and eutran-28 is there on
Add the missing QMI LTE bands 26 to 32 to dms_lte_bands_map to make them
usable in ModemManager.
---
diff --git a/src/mm-modem-helpers-qmi.c b/src/mm-modem-helpers-qmi.c
index 86e1803b..898f130a 100644
--- a/src/mm-modem-helpers-qmi.c
+++ b/src/mm-modem-helpers-qmi.c
@@ -275,6 +275,13 @@ static con
On Sun, May 12, 2019 at 11:44:03AM +0200, Thomas Schäfer wrote:
> Hi,
>
> I played a little bit with my new device EM7565. Everything works under Linux.
>
> qmi: ipv4, ipv4v6, ipv6
> mbim: ipv4, ipv4v6,ipv6
>
> Unfortunately I made a switch without knowing how to reverse it:
>
> AT!ENTERCND="A7
On Sun, Apr 21, 2019 at 07:16:10AM -0400, John Marrett wrote:
> Reinhard,
>
>
> > yes "DM capture"/dmrecord is the name of the corresponding Sierra Wireless
> > tool. The created log files usually require commercial tools from Qualcomm
> > or tools from UE vendors like Sierra Wireless for decodin
On Sun, Apr 14, 2019 at 04:24:34PM -0400, John Marrett wrote:
> Reinhard,
>
> Thanks for getting back to me so quickly, much appreciated.
>
> without Qualcomm diag logs on the MC7354 when the problem occurs it might
> > be very hard to find the root cause. In order to obtain them you would
> > pr
On Sun, Apr 14, 2019 at 09:19:28AM -0400, John Marrett wrote:
> I'm experiencing an issue with disconnect during downloads on the AT&T
> network using Jasper managed IoT SIMs on a private APN. Our devices are
> quite stable for long periods of time when running with normal operational
> traffic for
On Thu, Feb 21, 2019 at 04:42:25PM +0100, Aleksander Morgado wrote:
> Hey!
>
> > Within the debug output I found the following line
> > ModemManager[623]: [1550762368.321591] MBIM-powered Telit modem
> > found...
> > which points out, that calling
> > if (mm_port_probe_list_is_xmm (probes))
> >
On Fri, Feb 15, 2019 at 11:25:04AM +0100, Przemyslaw Galazka wrote:
> This is BalenaOS (resinOS) so probably yes it may be custom. I add BalenaOS
> Support to this thread.
>
> Florin, could you let us know what options are used for NM and ppp build
> regarding your OS?
>
> pt., 15 lut 2019 o 10:2
On Tue, Nov 06, 2018 at 09:11:00AM +0100, Aleksander Morgado wrote:
> Hey,
>
> > I got it installed, but it is still missing band 28 in the mmcli and qmicli
> > output. It is a MC7430 in QMI mode. Any special requirements?
> >
> >
> > Bands| supported: 'utran-1, utran-6, utran-5, utr
On Sun, Oct 07, 2018 at 08:27:58PM +0200, Andreas Fett wrote:
> Hi,
>
> On Sat, Oct 06, 2018 at 02:49:32PM +0200, Aleksander Morgado wrote:
> > > I could be mis-remembering, but I don't think this was intentional and
> > > if MBIM says IPv6 isn't available, then MM shouldn't say it's available
> >
The default AT^SCFG="Radio/Band" value for Cinterion PLS8-J devices is
"16819472". Add UMTS band 19 and LTE band 19 entries based on the
information given in the PLS8 datasheet.
---
plugins/cinterion/mm-modem-helpers-cinterion.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git
On Thu, Jul 19, 2018 at 09:44:57PM +0200, Aleksander Morgado wrote:
> On Thu, Jul 19, 2018 at 9:23 PM, Dan Williams wrote:
> > On Thu, 2018-07-19 at 21:10 +0200, Aleksander Morgado wrote:
> >> > On Chrome OS, we simply use ID_MM_PORT_IGNORE to ignore all AT
> >> > ports
> >> > on the L850-GL modul
On Fri, May 04, 2018 at 03:53:56PM +0200, Karl Kashofer wrote:
> Dear All, please help...
>
> I cant get my wwan modem to work on a current debian testing buster system:
> >Linux karl-acer2 4.15.0-3-amd64 #1 SMP Debian 4.15.17-1 (2018-04-19)
> x86_64 GNU/Linux
>
> I have a Huawei ME906E, apparent
On Tue, Apr 10, 2018 at 07:58:07PM +, Matthew Starr wrote:
> > -Original Message-
> > From: Dan Williams [mailto:d...@redhat.com]
> > Sent: Tuesday, April 10, 2018 1:17 PM
> > To: Matthew Starr; modemmanager-devel@lists.freedesktop.org
> > Subject: Re: [PATCH] u-blox: ignore non-AT ttyA
On Wed, Mar 28, 2018 at 09:43:20AM -0500, Dan Williams wrote:
> On Tue, 2018-03-27 at 14:28 +0100, Hugh Warrington wrote:
> > On 16 March 2018 at 22:51, Dan Williams wrote:
> >
> > > On Wed, 2018-03-14 at 16:41 +, Hugh Warrington wrote:
> > > > 1. Is registration denied a recoverable error --
On Wed, Jan 17, 2018 at 01:08:08PM -0600, Dan Williams wrote:
> On Wed, 2018-01-17 at 17:08 +0100, Aleksander Morgado wrote:
> > > > The following two patches implement support for loading and
> > > > updating
> > > > the UE mode of operation for EPS, as defined by 3GPP TS 27.007
> > > > and
> > >
On Tue, Oct 10, 2017 at 10:25:50AM +0200, Thomas Schäfer wrote:
> Hi,
>
> Thank you for testing, and directing me to documents with 900Pages :-)
>
> One thing is new for me.
> Until now I thought the APNs
> internet.t-mobile
> and
> internet.telekom
> have the same behavior.
> But this is not the
On Sat, Oct 07, 2017 at 11:31:27PM +0200, Thomas Schäfer wrote:
> Hi,
>
> since changing the context (ipv4, ipv4v6, ipv6) is often not trivial I would
> need a second opinion / report.
>
> I noticed that one of my smartphones accepts the apn-type/context IPv6
> (only),
> instead of ipv4 or IPv
On Wed, Jul 05, 2017 at 03:38:00PM +0200, Tore Anderson wrote:
> * Bjørn Mork
>
> > I don't know if this will help Tore much anyway. I did some testing
> > with the E392 to confirm that I remembered correctly: This modem does
> > *not* change the output of any command when IPv6 is disabled. The
On Sun, May 14, 2017 at 11:07:27AM -0600, matthew stanger wrote:
> Logic is sound.
>
> the user ends up changing the CID that the device uses for default LTE
> > attachment (e.g. CID=1 for Qualcomm or CID=16 for Huawei ME909u)
>
> Wouldn't this still end up being okay for users too. Once they re
On Mon, Mar 13, 2017 at 03:48:51PM +, Carlo Lobrano wrote:
> Hi Salvador,
>
> I'll look into this CSIM lock thing, but with a newer FW version I'm
> actually getting responses to CSIM and the next messages (see logs below).
>
Hi Carlo,
I performed some manual testing with a HE910-G running
On Wed, Mar 08, 2017 at 12:45:33PM +, Colin Helliwell wrote:
> I'll look for a command which can achieve the same test - perhaps the
> function could switch over to the alternative if it gets an
> 'unsupported' error? (My modems give a "+CME ERROR: 22")
Maybe AT^SSET would be worth a try as it
On Wed, Nov 30, 2016 at 10:16:42AM +0100, Aleksander Morgado wrote:
> On Mon, Nov 28, 2016 at 10:41 PM, Reinhard Speyerer wrote:
> > using CID 1 when this CID could be used for RAT LTE when used with
> > AT!SCACT or AT^SWWAN may generally be problematic for the following
>
On Mon, Nov 28, 2016 at 08:23:23PM +0100, Aleksander Morgado wrote:
> On Mon, Nov 28, 2016 at 7:03 PM, matthew stanger wrote:
> >> Ah, yeah. If the plugin does its own logic to select which CID to use,
> >> it should not rely on the parent's connection status check. In our
> >> case, though, I thi
On Sat, Nov 26, 2016 at 12:46:21AM +, Andrew Bird wrote:
> On Fri, 25 Nov 2016 21:16:55 +0100
> Reinhard Speyerer wrote:
>
> > On Fri, Nov 25, 2016 at 10:13:08AM +0100, Aleksander Morgado wrote:
> > > Hey Reinhard & Matthew,
> > >
> > > On Th
On Fri, Nov 25, 2016 at 09:55:41AM +, Andrew Bird wrote:
> On Fri, 25 Nov 2016 10:13:08 +0100
> Aleksander Morgado wrote:
>
> > Hey Reinhard & Matthew,
>
>
>
> > > One further difference I noticed is that USSD responses for AT+CSCS="GSM"
> > > contain a non-standard \xx escaping for non-pr
On Fri, Nov 25, 2016 at 10:13:08AM +0100, Aleksander Morgado wrote:
> Hey Reinhard & Matthew,
>
> On Thu, Nov 24, 2016 at 10:34 PM, Reinhard Speyerer wrote:
> [...]
> > PLS8-E REVISION 02.011:
> > +CUSD: 1,"Hauptmen~:\0A1 Guthabenkonto\0A2 Guthaben Verf~gbarkei
On Thu, Nov 24, 2016 at 11:58:28AM +0100, Aleksander Morgado wrote:
> [...]
> BTW; I'm worried that we're binding the logic too much to a specific
> device with 2 interfaces; I've seen some online AT command reference
> that doesn't even talk about the third parameter to specify interface
> index i
On Sat, Jul 23, 2016 at 08:39:43PM +0200, Thomas Schäfer wrote:
> Hi,
>
> I have had a chance to test the built in EM8805.
>
> At first I tried windows (it was already installed) to be sure the device
> works and to have an idea about the configuration. Unfortunately I have only
> pictures of i
On Thu, May 26, 2016 at 11:32:47AM -0600, Daniel Drake wrote:
> On Thu, May 26, 2016 at 9:51 AM, Dan Williams wrote:
> > So with that in mind, the question is how to figure out that the device
> > is capable of HiLink/ethernet mode and expose that somehow to
> > connection managers.
> >
> > If you
On Wed, Mar 02, 2016 at 03:27:38PM +0100, Bjørn Mork wrote:
> Yegor Yefremov writes:
> > On Wed, Mar 2, 2016 at 1:27 PM, Bjørn Mork wrote:
> >> Yegor Yefremov writes:
> >>
> [...]
> > This package has following file since 20151101:
> >
> > usb_modeswitch.d/12d1:1573
> >
> > with following conte
AFAIK it should not be required to implement a IMS client in
ModemManager for sending/receiving SMS in the Verizon LTE network at
least when either the MC7750 or the MC7354 with the VZW Gobi image is
used as both include an IMS client for SMS in their firmware.
If IMS registration has been success
60 matches
Mail list logo
