Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hallo, William Lum wrote: Hi, Thank you so much for continuing to try to help me. I tried what you suggested... some modules didn't load. ubuntu@ubuntu:~$ modprobe i2c-core ubuntu@ubuntu:~$ modprobe i2c-algo-bit ubuntu@ubuntu:~$ modprobe saa7111 modprobe: FATAL: Module saa7111 not found. Mea

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hallo, William Lum wrote: Hi, I looked in /proc/scsi/advansys and there is a file 13: AdvanSys SCSI 3.4: PCI Ultra: IO 0xAE00-0xAE0F, IRQ 0x15 Device Information for AdvanSys SCSI Host 13: Target IDs Detected: 2, (2=Host Adapter) [...] Does this mean it's loaded? It looks at least good. It

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hi, I looked in /proc/scsi/advansys and there is a file 13: AdvanSys SCSI 3.4: PCI Ultra: IO 0xAE00-0xAE0F, IRQ 0x15 Device Information for AdvanSys SCSI Host 13: Target IDs Detected: 2, (2=Host Adapter) EEPROM Settings for AdvanSys SCSI Host 13: Serial Number Signature Not Present. Host SCSI

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hallo, William Lum wrote: Yes my card does have the SCSI connector for the external drive which I don't use and the 15 pin for the breakout box. Is the SCSI Adapter recognized in the system ? The PCI Bridge ist the National Pico|Power IC. The Advansys should be the SCSI controller. Is the d

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Yes my card does have the SCSI connector for the external drive which I don't use and the 15 pin for the breakout box. When you say switch is it physical? Do I need to set it to a certain config? Thanks, On Sun., Mar. 21, 2021, 11:33 a.m. Bernhard Praschinger, < shadowl...@utanet.at> wrote: >

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hallo, sorry I was offline for quite a while. You write in the subject that you have a Iomega Buz card, but the lspci output say's ZR36057. Which was used in the DC10/DC30. Does your card have a SCSI interface connector and a 15 pin connector on the backplane ? The buz was the most problematic

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hello, Following your instructions here is what I found. I should also note that I am testing on a live USB stick vs installed on ssd. This was mainly because I had installed 3-5 different versions and flavours of linux trying to get this to work and wanted to avoid installing more until I find

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hallo William Lum wrote: Responses inline in Red. Thanks for your help. The color vanishes when I do a text only reply. >Some thought's about what you try to accomplish. Sorry for the longer >delay. > > I have a Zoran based capture card that Lubuntu doesn't seem to > > recog

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Responses inline in Red. Thanks for your help. William On Sat, Feb 6, 2021 at 5:56 AM Bernhard Praschinger wrote: > Hallo, > > Some thought's about what you try to accomplish. Sorry for the longer > delay. > > > I have a Zoran based capture card that Lubuntu doesn't seem to > > recognize. He

Re: [Mjpeg-users] Lubuntu doesn't seem to recognize IOmega Buz capture card

Hallo, Some thought's about what you try to accomplish. Sorry for the longer delay. I have a Zoran based capture card that Lubuntu doesn't seem to recognize.  Here is what I have done so far.  I'm new to linux so please take that into consideration with you instructions. 1. lspci | grep Z