Hello misc,
I tried to stop a sysupgrade before it updated anything by pressing the power
button, but by the time the computer shut off the install script was already
midway through updating the kernel. I know, bad idea on my part.
I was left with an unbootable kernel. To repair it I booted int
pe
wrote:
>On Wed, Dec 28, 2022 at 09:01:26PM +, Chris wrote:
>> After that however, the bootloader no longer prompts me for the full disk
>> encryption passphrase. Previously it was prompting me for the FDE passphrase
>> before it tried to boot the broken kernel.
>
&g
I've recently enabled VisualHostKey yes in my .ssh/config file. I
would like to hear from people who are using it and how they are
finding it useful.
Thanks.
I have had to interrupt (^c) cvs -d$CVSROOT checkout -P src command
about three times. I was wondering whether checking out src three
times would overwrite the old files or ignore what's already on the
disk and update files that are not there or do anything else?
I know I am supposed to run cvs -d
Does anyone know whether ACPI suspend/ resume now works? I do ctrl+alt
+ F1 (or 2, 3.. ) and try to suspend from
there with zzz and I get message: "suspending system" but nothing
happens. I get the same message when I type zzz from my wm (awesome).
Here's my dmesg. Thanks;
OpenBSD 4.5 (GENERI
When I start firefox (3.0.6) from the xterm shell, I get two firefox
starting at the same time. If I close one of them (by doing File -
Exit), it closes both of them. I have the same behavior from two
different window managers: awesome and scrotwm.
Has anyone else seen this behavior before?
Thank
I am trying to get the shell history with page-up but looks like it's
not working. I'm running -current with the default ksh and added
HISTSIZE=50 and export HISTSIZE to ~/.profile.
Does anyone know how to get it?
Thanks.
On Thu, Apr 2, 2009 at 3:46 PM, Nick Guenther wrote:
> On Thu, Apr 2, 2009 at 12:37 AM, Chris wrote:
>> I am trying to get the shell history with page-up but looks like it's
>> not working. I'm running -current with the default ksh and added
>> HISTSIZE=50 an
On Thu, Apr 2, 2009 at 3:55 PM, Nick Guenther wrote:
> On Thu, Apr 2, 2009 at 12:52 AM, Chris wrote:
>> On Thu, Apr 2, 2009 at 3:46 PM, Nick Guenther wrote:
>>> On Thu, Apr 2, 2009 at 12:37 AM, Chris wrote:
>>>> I am trying to get the shell history with page-u
My pkg_add gets blocked by the web based authentication system I use
at work. Every time I try pkg_add -iv honeyd, I get the following
error:
Error from ftp://rt.fm/pub/OpenBSD/snapshots/packages/i386/
Redirected to https://company.com:443//portal/login?__dest=rt.fm
Requesting https://company.com:
On Thu, Apr 2, 2009 at 3:00 PM, Nick Guenther wrote:
> On Thu, Apr 2, 2009 at 12:58 AM, Chris wrote:
>> On Thu, Apr 2, 2009 at 3:55 PM, Nick Guenther wrote:
>>> On Thu, Apr 2, 2009 at 12:52 AM, Chris wrote:
>>>> On Thu, Apr 2, 2009 at 3:46 PM, Nick Guenther wrote
On Mon, Apr 6, 2009 at 6:13 PM, J.C. Roberts wrote:
> If you are using ksh, and the above keys/key-combos do not work, then
> you have screwed around with the default ksh settings, or you are using
> a garbage terminal emulator that is screwing with the key-bindings.
The problem was with "export
On Tue, Apr 7, 2009 at 10:04 AM, Nick Guenther wrote:
> On Mon, Apr 6, 2009 at 7:54 PM, Chris wrote:
>> On Mon, Apr 6, 2009 at 6:13 PM, J.C. Roberts
>> wrote:
>>> If you are using ksh, and the above keys/key-combos do not work, then
>>> you have screwed around
E)" location: "JS frame ::
chrome://browser/content/utilityOverlay.js :: getShellService :: line
312" data: no]
Chris Bennett
_XPC_GS_RETURNED_FAILURE)" location: "JS frame ::
> chrome://browser/content/utilityOverlay.js :: getShellService :: line
> 312" data: no]
>
> Chris Bennett
I couldn't find anything on Google except diff's for this. Unhelpful.
The server has been running since
several times
I hadn't built Java addon for firefox35 recently because I always run
-current or close to it.
I built Java, but I cannot get any (including a slightly older version)
firefox35 to work.
I cannot achieve anything without IP access with Java.
If this is a hardware failure, I will ask for a replacement of whatever
it is that is broken.
If this is my fault, I can re-install or re-upgrade remotely, but I do
not have access to the interface I need until Wed.
Chris Bennett
> Original Message
> Subject: Re: Problem with server upgrade, upgrade or hardware failure?
> From: Jan Stary
> Date: Mon, October 22, 2012 4:54 pm
> To: ch...@bennettconstruction.us
>
>
> On Oct 22 14:10:52, ch...@bennettconstruction.us wrote:
> >
> >
> > > Original
On 2016-03-04 03:14, Kamil Cholewiński wrote:
On Fri, 04 Mar 2016, Joe Er wrote:
What do you use to manage your contacts? I am currently using the
address book in Thunderbird and am wondering if there is something
that
is better.
A file named ~/.people, with one entry per line:
Firstname
I'm using the latest snapshot on an IBM T60 laptop; suspend / resume
don't seem to be working. Typing "apmd" and then "apm -z" from my
window manager's xterm tells me "System will enter suspend mode
momentarily." and nothing happens. Typing "zzz" tells me "Suspending
system..." but nothing really
I want to buy one of these to share a Brother MFC-215C printer. My
wireless (wpi) is detected on my T60 laptop and it's on 802.11g.
If anyone knows any known issues and would like to share, that would
be appreciated. Thanks.
I installed hydra (4.1/i386) from the package list and tried:
hydra -l user -p password localhost ssh2 and I get an error -
Error: Compiled without LIBSSH support, module not available!
Does anyone know where I can get "LIBSSH" module support or how I can
enable this?
I installed Hydra from the
I just upgrade from 4.1-current to 4.2-current on i386. Apache failed
to start saying "bad username nobody". There is no mention of user
"nobody" in /etc/passwd or httpd.conf file. The user/group apache
starts as is www and both of them exist in /etc/group, passwd file.
Apache was working fine befo
On 11/6/07, Nick Holland <[EMAIL PROTECTED]> wrote:
> Chris wrote:
> there SHOULD be a user "nobody".
> There always has been (at least, since 1995). Take a look in cvsweb,
> or better yet, check your backups.
> Something deleted it. That's not good.
You are
On 11/6/07, Otto Moerbeek <[EMAIL PROTECTED]> wrote:
> You should also restore /etc/pwd.db and /etc/spwd.db, or recretae them
> using pwd_mkdb(8).
Thanks. Restoring these two files resolved the issue. Apache is now
starting fine.
However, typing newaliases still gives the mailwrapper.core
segment
On 11/6/07, Otto Moerbeek <[EMAIL PROTECTED]> wrote:
> I'd like a copy of your /etc/mailer.conf file. Probably it trips a bug
> in mailwrapper.
Thanks. I had a look in my /etc/mailer.conf and it read -
/usr/local/sbin/postfix-enable, which I changed to the following
(exactly as my 4.1 box) -
sen
I am trying to upgrade a T60 laptop that detects the HDD as wd0a.
After booting from the 4.2 base CD my HDD is detected as sd0 and the
installer does the fsck on sd0a. However, force checking non-root
filesystem during the installation fails as it fails to detect and do
fsck on wd0a from /etc/fstab
On 11/6/07, Daniel Ouellet <[EMAIL PROTECTED]> wrote:
> Are you sure your newaliases point to the right place?
>
> Is there is soft link or something may be on your newaliases command.
> Witch one are you using, the standard one, or the postfix one?
Thanks.
I have already removed postfix (pkg_del
My system boots to xdm & I login to ion. Is there any way I could try
out cwm while I am running ion?
Thanks.
I understand that OBSD releases patches only for the base system. But
if I, for example, run Firefox and there's a vulnerability in it, is
there any way to patch that without running -current or trying to
update Firefox from the Mozilla Foundation? What are some of the ways
to patch vulnerabilities
yt is giving me the following error while trying to download -
$ yt http://youtube.com/watch?v=huF2mrhTtCw&feature=dir
$ Getting http://youtube.com/watch?v=huF2mrhTtCw ...
/usr/local/bin/lua: /usr/local/bin/yt:42: assertion failed!
stack traceback:
[C]: in function 'assert'
/usr/l
I can connect to the localhost db but it reports "server status: stop"
while the server is actually running. I went to Tools -> Preferences
and changed the init script to /usr/local/bin/mysqld_safe and tried to
start the server and mysql-administrator exits saying: error executing
/bin/su command,
When I upgrade my packages I go this message -
# pkg_add -ui -F update -F updatedepends
Not updating .libs-curl-7.16.0, remember to clean it
Not updating .libs-subversion-1.3.2, remember to clean it
Not updating .libs1-apr-1.0.1p2, remember to clean it
Not updating .libs1-apr-util-1.0.1p3, remembe
On Dec 21, 2007 9:06 PM, Antoine Jacoutot <[EMAIL PROTECTED]> wrote:
> On Fri, 21 Dec 2007, Chris wrote:
> > My question is: what are these files and how do I get rid of them? Is
>
> You can pkg_delete them.
Thanks. You are right. It's all explained in this thread:
h
I haven't read the FAQ for a while and realize a lot has been changed.
Is there any way I could get a diff on the FAQ for the last 1 year and
read only the parts that has been changed?
Thanks for any help.
I upgraded from 4.1 to 4.2 with X and upgraded gnash. Now when I go to
certain sites using Firefox I get the following in STDOUT -
/usr/local/bin/gnash: can't load library 'libavcodec.so.8.0'
/usr/local/bin/gnash: can't load library '/usr/local/lib/libcurl.so.5.0'
Child process exited with status
I got a test box at home I'm trying to setup sendmail in. I bought a
domain and host a website on that box. I get dynamic IP from my ISP
which gets updated via DynDNS for the website. I added the MX for my
domain with Google and it's been working fine (I can send receive
mail). But I want to setup
On Jan 2, 2008 11:27 PM, Markus Lude <[EMAIL PROTECTED]> wrote:
> Did you upgrade your other packages as well or only gnash? How did you
> upgrade gnash?
I upgraded all packages by using:
pkg_add -ui -F update -F updatedepends command. Now when I run this
command I get:
Looking for updates: comple
After reading the undeadly post on cwm(1) I am trying it out in
Xnest(1). I was wondering how I could get a background image like the
one shown in undeadly.
Also, I can't invoke mutt using C-/ although I have a symlink in
.calmwm/. GUI apps like firefox and soffice fire up fine.
Any help would be
On Jan 28, 2008 8:40 AM, Salim Shaw <[EMAIL PROTECTED]> wrote:
> try http://eracks.com/
I been looking to host mail (sendmail) but couldn't find anything
cheaper. I don't need any rack mount server - just the cheapest deal
will do. Most of what I Googled for and found are not within my budget
(whi
I'm trying to setup a mail server. But getting an error: "m4:
mydomain.mc at line 11: include(../domain/mydomain.com.m4): No such
file or directory"
This is what I did so far -
cd /usr/share/sendmail/cf
cp openbsd-proto.mc mydomain.mc
vi mydomain.mc
divert(0)dnl
VERSIONID(`@(#)mydomain.mc $Rev
I am trying to use hotplugd(8) to mount my USB flash drive (/dev/sd1i)
automatically in /mn/flash when I plug it it. I enabled hotplugd in
/etc/rc.conf.local and wrote the following script (chmod +x bit set)
#!/bin/sh
DEVCLASS=$1
DEVNAME=$2
case $DEVCLASS in
On Jan 29, 2008 12:24 AM, Chris <[EMAIL PROTECTED]> wrote:
> I am trying to use hotplugd(8) to mount my USB flash drive (/dev/sd1i)
> automatically in /mn/flash when I plug it it. I enabled hotplugd in
> /etc/rc.conf.local and wrote the following script (chmod +x bit set
> # Maybe some debugging will help:
> #
> exec >> /tmp/logfile 2>&1
> set -x
i changed the /etc/hotplugd/attach script with "JetFlash*" and also
enabled debugging - any further help would be much appreciated.
Thanks.
/var/log/messages output -
Feb 1 17:30:11 red /bsd: umass0 at uhub0 port 2 con
my logs are filled with useless ssh bruteforce attempts - is there
anything i can do to avoid logging random brute force attacks? since i
disallow ssh root login and use the allowuser acl - i guess i could
just avoid logging all these random attacks in my logs.
Any suggestions would be much apprec
On Feb 1, 2008 3:19 AM, frantisek holop <[EMAIL PROTECTED]> wrote:
> change
> JetFlash*)
> to
> TS8GJFV30*)
this worked. thanks!
> I usually use gqview for general photo viewing, simple fast, and effective.
this is exactly what i was looking for. thanks.
I am trying to a access a switch connected to a USB-Serial controller
to my laptop's USB port. When I plug in the USB port to my laptop I
get the following in my /var/log/messages. But I am not sure which
/dev/ to use in minicom to access the switch. I can see there
is no /dev/uplcom0 or /dev/ucom0
On Feb 2, 2008 10:29 PM, Marc Balmer <[EMAIL PROTECTED]> wrote:
> > /dev/ttyU0
> you should use /dev/cuaU0 for "dial-out".
Thanks. I tried both /dev/ttyU0 and /dev/cuaU0 in minicom. They both
seem to go to the "initializing modem" phase but when I turn on the
switch with "/dev/cuaU0" configuration
the baud
rate? This Cisco 3950 switch is usually connected at 9600 baud rate
via serial console. Here's /var/log/aculog -
/var/log/aculog -
chris (Sun Feb 3 10:05:04 2008) call completed
chris (Sun Feb 3 10:09:06 2008) call terminated
chris (Sun Feb 3 10:09:08 2008) call completed
Thanks.
On Feb 3, 2008 10:22 AM, johan beisser <[EMAIL PROTECTED]> wrote:
> You may hit space or enter.
I did but looks like it just hangs in there - jammed. Nothing happens.
> Sometimes it just has to wake up. Cisco,
> by default, uses 9600 8,N,1 if i remember correctly.
Yes. You are right.
> Is there
My USB drive and camera get automagically mounted by hotplugd attach
script. I was wondering if I need to write a detach script as well.
Bob Beck mentioned in his undeadly post that the detach script is not
really needed.
Could anyone shed some light on this please? Thanks.
I have a P3 box with 120GB HDD that's doing web, ssh and samba at the moment. I
am planning setup sendmail, spamd, mimedefang, clamd and spam-assassin
on this box along with web, ssh and samba.
I was wondering if anyone has any experience with running a mail server at home.
I want to know if I sho
Could anyone point me to a good documentation on how to setup a direct
sendmail mail server on openbsd 4.2? I know there's the manpages and
the README file but those are going over my head. Most of the
documents I google for either talk about smarthost or postfix or
sendmail client.
Thanks for any
I am trying to upgrade from 4.2-release to -current. I am following:
http://openbsd.org/faq/faq5.html
I did:
cd /usr
export [EMAIL PROTECTED]:/cvs
cvs -d$CVSROOT checkout -P src
cvs -d$CVSROOT up -Pd
cd /usr/src/sys/arch/i386/conf
config GENERIC
config GENERIC gives me the following error:
I have upgraded my 4.2-release to 4.3-beta. But I am a bit confused as
I cannot see snmpd.conf, relayd in /etc. However, I can see them in
/usr/src/etc/. When I login it says, 4.3-beta and uname -amp shows 4.3
GENERIC #1. I followed:
http://cvs.openbsd.org/faq/current.html#20071125 and then,
http:/
I been trying (rather unsuccessfully) to convince various clients and
employers to adopt OpenBSD. Most people, I find, are resistent to
change and would not use anything they are not familiar with. Others
would say that if I leave the job, it would be hard to find people who
can use (or even heard
My name is Chris and I work on behalf of www.cheaplaptopparts.co.uk. I
am looking for quality, related websites to swap hyperlinks with and I
came across your site, monkey.org and wondered if you would consider
swapping hyperlinks with us? Cheaplaptopparts.co.uk sells laptop
adaptors and
I'm running samba on 4.1-release but every time I try to connect
(smbclient -U chris 192.168.25.18\\tmp), I get this error -
Domain=[BLUE] OS=[Unix] Server=[Samba 3.0.24]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
Here's my /etc/samba/smb.conf file
[global]
bind
I'm trying to buy (from ebay) a cisco switch, router and pix firewall
for learning purposes. All these will be connected to a Linksys ADSL
modem which also has wireless capability. The OSs will be OpenBSD4.1,
Windows XP and Linux distros. I will probably also try IPv6 (not sure
if that has got anyt
nversion?
>
> Thanks
> Josh
>
An alternative to consider, Zimbra. It has an app that will atlease
allow you to pull in the mail to it's server and you still keep a
certain amount of collaboration.
--
Best regards,
Chris
Registerd Linux user number 448639
I downloaded all the packages & put them in /usr/ports/distfiles. I
had to change the Sha1 checksum for xalan-j_2_7_0-bin.tar.gz as
make(1) was exiting with a signature mismatch error. (File:
/usr/ports/devel/jdk/1.5/distinfo)
I go to /usr/ports/devel/jdk/1.5 and type "make install" and it exits
fetchmail was complaining that procmail cannot create /var/mail/me
while fetching mail. The permission on /var/mail/ directory was set to
-
drwxr-xr-x 2 root wheel 512 Aug 19 12:16 /var/mail/
I changed it to -
drwxrwxr-x 2 root wheel 512 Aug 19 12:16 /var/mail/
It's working fine now since
On 8/20/07, Brian A. Seklecki <[EMAIL PROTECTED]> wrote:
> "Unexepected EOF" ? That means that the download never completed that the
> file is truncated (which leads to the SHA1 and Size mismatch)
Thanks to all who replied. The SHA1 for jdk1.5 in OpenBSD 4.1 is
correct. The issue was with downloa
Not sure if it's OpenBSD related but I'm using urlview v0.9 with mutt
v1.5.12 and firefox v2.0.0.3 on OpenBSD 4.1. My window manager is
wmii.
I just put the following line in my /home/me/.urlview and nothing in
.muttrc or anywhere else. When I go to mutt and press CTRL-b, it shows
the url list and
I will be upgrading my ports tree from 4.1-release to 4.2-release when 4.2
comes out. This is my first ports upgrade. So I was wondering if my action
plan looks right:
- backup my existing 4.1 /usr/ports directory
- untar the 4.2 ports tgz file in /usr/ports
- go to /usr/ports/path/to/applicatio
I was wondering whether this - http://openbsd.org/faq/faq3.html#ISO -
FAQ entry should be changed as OpenBSD now does provide ISO for base
install?
I been looking for ways to let normal user run privileged commands and
after some searching found that adding users to the wheel group is bad
and also adding NOPASSWD and ALL = ALL to sudoers for an user is also
plain as bad. The only alternative I can think of at the moment is to
populate the sudo
On 9/16/07, Aaron W. Hsu <[EMAIL PROTECTED]> wrote:
> What exactly are you trying to enable users to do? The fact that you need to
> provide normal users with these kind of privileges indicates a possible flaw
> in your overall scheme. You may find that, after careful reconsideration,
> there are p
On 9/17/07, Darrin Chandler <[EMAIL PROTECTED]> wrote:
> problem is. This is why people keep asking you to explain the problem
> more.
Sorry for being vague. Ok, I have these in /etc/sudoers for joeuser.
joeuser is also in the wheel group.
joeuser server = NOPASSWD: /sbin/mount, /usr/libexec/loca
I'm trying to mount a Sony DSC-P100. /var/log/messages output -
Sep 27 14:33:23 host /bsd: ugen1: Sony Sony PTP, rev 2.00/2.00, addr 2
But there is no /dev/ugen1 rather /dev/ugen0.00 - 1.15 and I cannot
seem to mount it with mount /dev/ugen0.00 or /dev/ugen0.01. I read the
uge(4) manpage but confu
I'm having trouble running Gorilla on 4.1. I downloaded the source file
(http://www.fpx.de/fp/Software/Gorilla/download/gorilla-1.4.tar.gz) and ran
./configure. If I type ./gorilla the GUI client says "The password Gorilla
requires the [incr TCL] add-on to Tcl. Please install the [incr Tcl] package
> There is a way to test hard drives for possible failures or foresee
those errors?
Try www.Spinrite.com for drive testing and data recovery. If all is
lost, you can wipe the disk with BCWipe (www.jetico.com) then test again
with Spinrite. This has recovered several disks for me.
SMART is close
Diana Eichert wrote:
>> thus Jack J. Woehr spake:
>> 3. There are few or no ways in Hades to get a CDROM of 4.0/4.1
>
> eBay?
>
>
>
I have 2 copies ... Any high bids?!
--
Best regards,
Chris
Nothing improves an innovation like lack of controls.
your E2K3 server with the help of ssh.
It sounds complex (it is for a newb) but once you wrap yer head around
what's going on - it really works very well.
I did that at my company and its a work of art. Unless you want to pay
for add ons like Mail Essentials (I think that is by far the
I use wpi0 to get to the net and never had issues until now. I get IP
from the DHCP pack of the ADSL modem.
But can't connect to the net. If I ping mit.edu I get: ping: sendto:
No route to host
ping: wrote mit.edu 64 chars, ret=-1 then I have to do dhclient wpi0
and get issued an IP and ping mit.ed
I know this is not OpenBSD related but I'm just asking for if someone
has any first-hand experience with IronPort [1]
My company has decided to move away from Solaris 8 mail system (sendmail,
clamav, mimedefang, relaydelay and god-knows-what-else) - the reason for the
move is that the current
I've been trying to send mails via Gmail's IMAP using Mutt 1.5.17 on
OBSD 4.3. I installed this Mutt from the package list. But sending
mails don't work as it says "SMTP authentication requires SASL" The
output of mutt -v shows "-USE_SASL". Is there any way to get around
this on OBSD 4.3 w/o compil
I'm using awesome window manager and trying to configure xlock so my
system gets locked after "x" seconds if I don't touch the keyboard or
mouse. But nothing seems to be happening after "x" seconds.
I tried to put the following in my .Xdefaults
XIdle.timeout: 5
XLock.mode: random
XLock.mousemotio
I've download and burned the 4.4 ISO from a local mirror and trying to
upgrade from 4.3 to 4.4 on i386. After the installer does the fsck
-fp, I get the following error:
uid 0 on /: file system full
/: write failed; file system full
cp: /tmp/hosts: No space left on device
I've also tried the 4.3
On Tue, Nov 4, 2008 at 4:51 AM, Alexander Hall <[EMAIL PROTECTED]> wrote:
> I doubt he's trying to install stuff to the ramdisk...
Thanks all for your help.
My current OpenBSD 4.3 installation is sitting on / (/var, /home,
/root and everything else is under /) - only one partition. And I have
abo
On Wed, Nov 5, 2008 at 10:38 AM, Kenneth R Westerback
<[EMAIL PROTECTED]> wrote:
> On Tue, Nov 04, 2008 at 02:37:40PM -0800, Chris wrote:
>> On Tue, Nov 4, 2008 at 4:51 AM, Alexander Hall <[EMAIL PROTECTED]> wrote:
>> > I doubt he's trying to install stuff to
I been updating packages from 4.3 to 4.4 but my box rebooted due to a
power outage and now I'm getting the following error while updating
packages:
Warning: couldn't read packing-list from installed package jasper-1.900.1
File /var/db/pkg/jasper-1.900.1/+CONTENTS does not exist
/usr/sbin/pkg_add:
On Wed, Nov 5, 2008 at 3:37 PM, Marc Espie <[EMAIL PROTECTED]> wrote:
> On Wed, Nov 05, 2008 at 07:05:56PM +0100, Louis V. Lambrecht wrote:
>> Stuart Henderson wrote:
>>> On 2008-11-05, Chris <[EMAIL PROTECTED]> wrote:
>>>
>>>> I been updating pa
I'm trying to get ACPI suspend and resume working. Typing "apm -z"
from my window manager's xterm just returns me back to the shell.
Typing "apmd" and then "apm -z" tells me "System will enter suspend
mode momentarily." and then nothing happens. Following is my dmesg.
Thanks for any help.
OpenBSD
I'm trying to install x86 4.4-release on a RAID mirror 465.8g disk.
The installation hangs after the last file set is installed
(xserv44.tgz): it just sits there and I cannot use my keyboard
anymore. The BIOS shows there are two disks of 500G.
During the the installation I can see two disks: wd0 a
I'm trying to install OBSD 4.4-release on this desktop which has two
hard disks of around 465 GB each. If I install on wd0 with only one
partition (/) of 10GB, the installation goes smoothly. But if I try to
allocate /tmp (20g), /home (100g), / (50g), /var (50g), /usr (50g),
swap (3g), the installa
> 2) in an earlier message you indicated that there was some kind of
> RAID on this system, I think it is safe to say that it is a BIOS-assisted
> software RAID, which COULD be causing you problems if it is still
> configured in the BIOS. And even if it isn't causing this problem,
> it WILL bite y
On Mon, Dec 1, 2008 at 12:19 AM, Richard Toohey
<[EMAIL PROTECTED]> wrote:
> I've got a couple of Dell SC440s with the same sort of set-up, and
> no problems here.
>
> Two 500Gb drives, wd0 and wd1:
I have resolved this issue. I tried the installation again and this
time selected fdisk before sele
I have some rules in my pf.conf for ssh brute force where it should
block and log the offending IP address in /etc/bruteforce file. I also
told syslog to log all ssh logging in /var/log/sshd. I can see some
failed login in /var/log/sshd but my /etc/bruteforce file is still
empty. Here's my pf.conf
On Wed, Apr 16, 2008 at 1:39 PM, Calomel <[EMAIL PROTECTED]> wrote:
> Can you see ips in the "bruteforce" table?
> pfctl -t bruteforce -T show
> If you want to dump those ips from the table to the text file you can
> always do "pfctl -t bruteforce -T show >> /etc/bruteforce"
Thanks. This resol
u would be best served to use freenode.
--
Best regards,
Chris
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
"There's no place like 127.0.0.1"
[demime 1.01d removed an attachment of type application/pgp-
As a part of upgrading from 4.2 to 4.3 I needed to upgrade
wpi-firmware to v2.14.1.5. As this package is not available from the
package list. I needed to set PKG_PATH to
http://damien.bergamini.free.fr/packages/openbsd/ and then pkg_add -ui
-F update -F updatedepends wpi-firmware and then choose th
On Sat, May 17, 2008 at 11:34 AM, Matthew Szudzik
<[EMAIL PROTECTED]> wrote:
> On Fri, May 16, 2008 at 09:03:17PM -0300, John Nietzsche wrote:
>> i would like to add support for java on my 4.3 openbsd desktop. Has
>> anybody already done so? May you point a url where i could download
>> the package
I am having issues with one of my OBSD boxes receiving DHCP IP address
from my ADSL modem. This problem has just started recently and I am
not sure if it's a software or hardware that's causing the issue. My
network interface is fxp0 and if I do "ifconfig fxp0", it shows
"status: no career". If I d
I can see from the recent undeadly posts and pictures that most
developers are using laptops and I know you have to run -current to do
development work. I was just wondering if these laptops are for
development use only or development+personal use? I know -current can
break sometimes and am just cu
for my dad who will only be using it for about a month and a half
anyway, but I am curious if its a problem with this particular card, or
with some 8185's in general
Chris Bennett
I want to buy this keyboard and like to know if anyone uses it with
OpenBSD 4.3 [http://tinyurl.com/5szfz6] [ebay.com].
>From little what I understand, it uses USB technology and the
connection from the USB to the keyboard is wireless and uses
bluetooth. I wonder if this would actually work with O
I write once again for the same old things I was writing
at the opwnbsd 3.4. If you search the emails to the list are there.
Same old same old.
The pppoe dial error (userland) "cant assign requsted address" after
4 major OpenBsd releases didnt go away. Noone cared to address the situation
and of
Brian O'Sullivan wrote:
> Has anyone seen
> http://uncyclopedia.org/wiki/OpenBSD ?
> Quite informative.
>
This site is a riot! it makes fun of all the OS's
--
Best regards,
Chris
Never eat at a place called moms, never play cards with a
man named doc, and never lie dow
You using a german provider right?
So dont worry about it till now I have found no way
to get around this from openbsd 3.3 I use pppoe.
T-online is broken and alice and I others are better but this
is an issue for them too.
So just sto worring its just the message it do no harm in anything;)
On
1 - 100 of 2648 matches
Mail list logo
