On Tue, Jan 23, 2024 at 11:52:01AM +, Alex Frolkin wrote:
> Hi all,
>
> Has anyone had any success with getting a Huawei (Vodafone-branded)
> K5161h 4G dongle working on OpenBSD?
>
> It looks like it should work with the umb(4) driver, but the problem is
> getting it into the right mode. Whe
On Wed, Jan 24, 2024 at 08:37:18AM +, Alex Frolkin wrote:
> On Wed, Jan 24, 2024 at 11:47:53AM +1100, Jonathan Gray wrote:
> > umsm(4) does the equivalent in the kernel. DEV_UMASS5 seems most
> > likely, but there are other methods to try as well.
>
> Ah, interesting
On Thu, Mar 14, 2024 at 03:07:22PM +0100, Christer Solskogen via misc wrote:
> I've got a hold of two iKOOLCORE R2 today and installed OpenBSD(latest
> amd64 snapshot) on them, but I can't seem to wrap my head around if
> it's running at full speed or not.
>
> hugs# sysctl hw
> hw.machine=amd64
>
On Fri, Mar 15, 2024 at 08:49:14AM +0100, Christer Solskogen via misc wrote:
> On Fri, Mar 15, 2024 at 1:15 AM Jonathan Gray wrote:
> >
>
> > The 1MHz higher is the turbo setting. When speedstep speeds are shown
> > in dmesg it is the highest.
> >
> >
On Mon, Aug 29, 2022 at 07:56:40AM +0100, Hashim Mahmoud wrote:
> This iMac's screen works fine, but always turns off when the radeon GPU
> driver is loaded on any UNIX (tried Linux Mint and NomadBSD as well). I
> had to install OpenBSD on another machine since I was installing to an
> SD card, as
On Mon, Aug 29, 2022 at 10:03:34AM +0100, Hashim Mahmoud wrote:
> On Mon, 29 Aug 2022 17:19:16 +1000
> Jonathan Gray wrote:
>
> > On Mon, Aug 29, 2022 at 07:56:40AM +0100, Hashim Mahmoud wrote:
> > > This iMac's screen works fine, but always turns off when the rade
On Wed, Sep 07, 2022 at 10:04:03AM +0200, Paul Kelly wrote:
> Hey Julian,
>
> On 9/4/22 18:18, Julian Huhn wrote:
> > Moin!
> >
> > I can reproduce with my X270. With -current it does not work and with
> > 6.9 both external monitors run without problems.
> >
> > Same problem as I had already men
On Wed, Sep 07, 2022 at 05:29:14PM +0200, Paul Kelly wrote:
> On 9/7/22 13:05, Jonathan Gray wrote:
> > If you add "option DRMDEBUG" to your kernel config
> > there may be some hints in the (large amount of) dmesg output
> >
> > Also build with this to add s
On Thu, Sep 08, 2022 at 10:48:26AM +0200, Paul Kelly wrote:
> On 9/8/22 03:07, Jonathan Gray wrote:
> > Index: sys/dev/pci/drm/i915/i915_drv.c
> > ===
> > RCS file: /cvs/src/sys/dev/pci/drm/i915/i915_drv.c,v
&g
On Wed, Sep 14, 2022 at 07:00:56AM +0100, Jason McIntyre wrote:
> On Tue, Sep 13, 2022 at 06:54:40PM -0400, luna wrote:
> > On Tue, Sep 13, 2022 at 07:04:55 +0100, Jason McIntyre wrote:
> > > hi.
> > >
> > > we stopped installing them because many of them were falling out of date
> > > and there w
On Sun, Sep 25, 2022 at 03:34:55PM +1000, Stuart Longland wrote:
> Hi all…
>
> I'm just in the process of setting up a Wordpress site for development
> purposes on a VPS running OpenBSD 7.1, and I'm seeing this when I try
> to install the `gd` extension:
>
> vk4msl-bne# pkg_add php-gd-8.1.10
On Tue, Nov 08, 2022 at 12:45:42AM -0500, Philippe Meunier wrote:
> Hi,
>
> I have a new Thinkpad T14 AMD Gen 3. I tried OpenBSD 7.2-current and the
> install went smoothly (from USB thumb drive to USB thumb drive, for now).
> The machine booted, X11 seems to work fine, and so does the Ethernet
On Tue, Nov 08, 2022 at 03:36:12AM -0700, Theo de Raadt wrote:
> Jonathan Gray wrote:
>
> > > More importantly the wifi card (Qualcomm QCNFA765) is not recognized. Is
> > > there any chance that it might become supported in the reasonable future
> > > or
>
On Fri, Nov 11, 2022 at 12:53:29AM -0500, Philippe Meunier wrote:
> Jonathan Gray wrote:
> >Glad to hear amdgpu works on Rembrandt/Yellow Carp.
>
> On a related note, I noticed I get the following kernel message when
> shutting down the X server:
>
> [drm] *ERROR* Err
On Tue, Nov 15, 2022 at 01:07:04PM +0100, Rafael Sadowski wrote:
> On Sat Nov 12, 2022 at 09:01:58AM +0100, Rafael Sadowski wrote:
> > Hi misc@
> >
> > Can anyone recommend the "Lenovo ThinkPad X1 Carbon G10 21CB00B9GE" with
> > OpenBSD and has experience with it? Would appreciate any reports of
>
On Tue, Dec 13, 2022 at 01:32:53AM +, void wrote:
> Hi misc@
>
> I'd like to have it so a pppoe FTTP connection doesn't automatically
> obtain and apply the ISP's nameservers to /etc/resolv.conf. The machine
> already runs unbound, so resolv.conf has loopback for ipv4 and ipv6 in
> it. pppoe a
On Wed, Feb 01, 2023 at 09:47:53PM -0800, Logan Ellis wrote:
> Hi all,
>
> Attempting to do single-os install of OpenBSD on my 2019 13” Intel MacBook
> Pro, but the nvme drive is not detected during installation. The usb drive
> containing the installer is detected without issue. `machine diskin
On Mon, Feb 06, 2023 at 10:04:10AM -0800, Logan Ellis wrote:
> Hi Jonathan,
>
> Wanted to provide update: I was able to build a release image from source
> using another amd64 VM and I incorporated your changes. The disk is now
> detected by the installer using `sysctl hw.disknames`. `fdisk -g s
On Tue, Feb 07, 2023 at 03:53:56PM +0800, Digua Dong wrote:
> Hello
>
> I'm running OpenBSD 7.2 on Lenovo V15 G2 82KB,
> with i5-1135G7 and Xe Graphics
>
> Scroll tearing is really bad in Firefox and even SinpleTerminal,
> so I tried to use Tearfree option in intel(4), and boom!
> X crashed
>
>
On Mon, Apr 10, 2023 at 11:26:22AM +0100, Kaya Saman wrote:
> Hi,
>
>
> I'll ask the second question first as it might be easier to implement...
>
>
> Currently I have found that the dns servers specified in the resolv.conf
> file are not being used. Instead my machine is prioritizing the ISP o
On Wed, Jun 05, 2013 at 07:01:27PM +1000, John Tate wrote:
> I am having trouble building 5.3, I ran cvs a second time just be to be
> sure everything was right.
>
> # make clean && make
> rm -f eddep *bsd *bsd.gdb tags *.[dio] [a-z]*.s [Ee]rrs linterrs assym.h
> cat ../../../../arch/i386/i386/ge
There is something not quite right with acpi on the x41.
It might be related to something along the lines of
interrupt mapping or memory regions not being setup correctly.
While disabling acpi in ukc will let you suspend/resume
it doesn't get us any closer to figuring out what is
going on. Does d
On Sat, Aug 10, 2013 at 02:53:41PM +0200, Peter Olsson wrote:
> Hello!
> Does OpenBSD support the recently released Intel I210 card?
> I have searched the net but have not come up with a satisfying answer to
> this.
>
> Thanks,
> Peter
The i210/i211 chips aren't supported yet. The i217/pch_lpt f
Did you install the firmware first?
It seems odd that wsdisplay is not listed in your dmesg, is
that just an omission on your side?
Anyway to get some more information you could build a kernel with:
Index: drmP.h
===
RCS file: /cvs/
On Mon, Aug 26, 2013 at 12:35:18PM -0700, patrick keshishian wrote:
> help?
> should I wait for next snapshot?
Some of the integrated graphics parts were previously disabled
due to various issues. The radeondrm code we have now is a
complete re-port though so try this:
Index: radeon_kms.c
==
On Mon, Aug 26, 2013 at 10:45:00PM -0700, patrick keshishian wrote:
> On 8/26/13, Jonathan Gray wrote:
> > On Mon, Aug 26, 2013 at 12:35:18PM -0700, patrick keshishian wrote:
> >> help?
> >> should I wait for next snapshot?
> >
> > Some of the integrated
On Tue, Aug 27, 2013 at 01:15:02AM -0700, patrick keshishian wrote:
> On 8/26/13, Jonathan Gray wrote:
> > On Mon, Aug 26, 2013 at 10:45:00PM -0700, patrick keshishian wrote:
> >> On 8/26/13, Jonathan Gray wrote:
> >> > On Mon, Aug 26, 2013 at 12:35:18PM -
On Tue, Sep 10, 2013 at 09:28:38PM +0200, Stefan Wollny wrote:
> Hi there,
>
> hope, s.o. can provide a clue on why I have no sound on my iMac, which with
> OS-X has no issues with sound at all. Full dmesg at the end.
Most/all? of the apple machines seem to have audio wired up strangely
and req
Try this, you'll have to run 'make' in /sys/dev/usb
after applying the patch then build a kernel as usual.
Index: usbdevs
===
RCS file: /cvs/src/sys/dev/usb/usbdevs,v
retrieving revision 1.605
diff -u -p -r1.605 usbdevs
--- usbdevs
On Thu, Oct 10, 2013 at 05:48:43PM -0400, RD Thrush wrote:
> I noticed some anomalies in the dmesg on this new system.
>
> 1. error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before
> writing to 10
>
> 2. dhclient doesn't work with the onboard nic (possibly since the lladdr
On Thu, Oct 10, 2013 at 05:48:43PM -0400, RD Thrush wrote:
> I noticed some anomalies in the dmesg on this new system.
>
> 1. error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before
> writing to 10
That should be harmless, and will go away when we update to newer
upstream i9
On Thu, Oct 10, 2013 at 09:41:40AM -0700, Chris Cappuccio wrote:
> Otto Kurunczi [otto.kurun...@gmail.com] wrote:
> > -vo sdl works but the playback is tearing and skipping.
> > That's why I built a xorg.xonf file and added:
> > Option "AccelMethod" "sna"
> > Option "TearFree" "True"
> >
> > The C
On Fri, Oct 11, 2013 at 02:39:30AM -0400, RD Thrush wrote:
> On 10/11/13 01:05, Jonathan Gray wrote:
> > On Thu, Oct 10, 2013 at 05:48:43PM -0400, RD Thrush wrote:
> >> I noticed some anomalies in the dmesg on this new system.
> >>
> >> 1. error: [drm:pid0:i91
On Fri, Oct 11, 2013 at 09:32:13AM +, Stuart Henderson wrote:
> On 2013-10-10, Bryan Chapman wrote:
> > The only thing I see in /var/log/messages was on the end of the dmesg I
> > posted:
> >
> > Oct 10 03:28:21 mystic /bsd: drm: initializing kernel modesetting
> > (PITCAIRN 0x1002:0x6819 0x
There is a driver in development in -current that is not yet
enabled, axen(4). It is not part of 5.4.
On Fri, Oct 18, 2013 at 10:29:27PM +0800, man Chan wrote:
> Hello,
>
> I recently brought a pci usb gigabit ethernet with chipset AX88179 and
> update the source to 5.4.? After the making the 5.
On Wed, Oct 23, 2013 at 10:53:49PM +0400, Sevan / Venture37 wrote:
> On 23 Oct 2013, at 12:53, "Alexey E. Suslikov"
> wrote:
>
> > Have you tried to disable [intel|ati]drm via boot config and
> > then proceed with installation?
>
> It's not possible as the prompt keeps on jumping back & forth b
On Thu, Oct 24, 2013 at 08:01:50AM +, Aviolat Romain wrote:
> Dear openbsd users,
>
> I'm trying to install an Intel 82580 dual port SFP PCIe adapter in obsd 5.3
> amd64. The device isn't recognized and I've got errors in dmesg like:
>
> "em0 at pci5 dev 0 function 0 "Intel 82580 Fiber" rev
On Mon, Oct 28, 2013 at 11:20:32AM +0100, Peter J. Philipp wrote:
> I remember someone else writing to this list before saying the nvidia
> driver is really slow. I just upgraded my main workstation from 5.3 to
> 5.4 and it indeed is.
>
> So I'm wondering what driver I should use because the chop
On Tue, Jan 06, 2009 at 11:08:28PM +, FRLinux wrote:
> Hello,
>
> I bought a Linksys WUSB600N adapter from (Cisco) Linksys. The device
> is detected when inserted as a generic ugen0 device :
>
> /bsd: ugen0 at uhub0
> /bsd: port 4 "Cisco-Linksys LLC Dual-Band Wireless-N USB Network
> Adapter
On Wed, Jan 07, 2009 at 12:19:35AM +, FRLinux wrote:
> On Tue, Jan 6, 2009 at 11:25 PM, Jonathan Gray wrote:
> > Try adding it to dev/usb/if_run.c, if_ral.c is several ralink
> > chip generations ago.
> >
> > If that doesn't work include the output of
> >
On Wed, Jan 07, 2009 at 02:49:50PM -0500, STeve Andre' wrote:
>My new Thinkpad W500 has a SD slot, and stuffing a 1G card in
> works just fine.
>
>I borrowed a 16G SD card, and that gives a "can't enable card"
> error.
>
>I just found specs for the SD card, and wonder if the current
>
On Thu, Jan 08, 2009 at 10:58:52AM +1100, Jonathan Gray wrote:
> On Wed, Jan 07, 2009 at 02:49:50PM -0500, STeve Andre' wrote:
> >My new Thinkpad W500 has a SD slot, and stuffing a 1G card in
> > works just fine.
> >
> >I borrowed a 16G SD card, and
On Thu, Jan 08, 2009 at 09:32:47AM -0500, Dan Colish wrote:
>
> The latest patch works great for me. I was not able to write disklabels with
> the prior patch, probably due to the block write code missing. As soon as I
> get the card up, I'll post some i/o benchmarks.
Well it's an SD card, don't
On Tue, Feb 03, 2009 at 08:08:45PM +0100, Dorian B?ttner wrote:
> Feb 3 19:02:55 eee /bsd: ugen0 at uhub2 port 1 "vendor 0x0d98 Avaya
> Wireless USB Adapter" rev 1.10/0.00 addr 2
>
> According to http://www.wifihowto.org/?mo=HowTo;Item=14 it should work
> with the wi driver, but wi doesn't att
If it's anything like the T42 the serial port is disabled by default
in the bios, it is included in the laptop but you need something like
a port replicator/docking station to get a physical connector.
After changing the bios option it should just work, you can
even have the system console/ddb on
On Wed, Feb 04, 2009 at 12:37:26PM +0100, Dorian B?ttner wrote:
> Patch applies cleanly - can you please not commit it? Attaching the
> device raises following message(s):
> Feb 4 14:24:28 LT213 /bsd: wi0 at uhub2
> Feb 4 14:24:28 LT213 /bsd: port 1 "Avaya Orinoco Gold" rev 1.10/0.00
> addr
http://marc.info/?l=openbsd-misc&m=123266988519415&w=2
On Mon, Feb 09, 2009 at 12:26:04AM +0100, Xavier Beaudouin wrote:
> Hello,
>
> Just a quick question, what is the status of hoststated ?
>
> I ran into http://www.openbsd.org/papers/eurobsdcon07/pyr-loadbalancing/
> and I found that a quite e
Using the information out of acpi for this on amd64 has
been disabled for now due to reliability issues:
http://marc.info/?l=openbsd-cvs&m=123492694729019&w=2
On Mon, Feb 23, 2009 at 09:32:24AM +0100, Robert wrote:
> Hi,
>
> perhaps i am totally missing something, but in the last snapshots
> sp
On Mon, Nov 19, 2018 at 08:37:01AM -0700, Andy Bradford wrote:
> Thus said Jonathan Gray on Mon, 19 Nov 2018 20:42:46 +1100:
>
> > > Thanks for the suggestion. Here's the additional output provided by your
> > > patch:
> > >
> > > radeon_atrm_g
On Mon, Dec 03, 2018 at 01:16:09PM -0500, Charles A Daniels wrote:
> I'm curious to know if anyone involved with OpenBSD/landisk has any
> comments on J-core[1]? It claims to implement SuperH and capability to
> boot Linux on an FPGA.
>
> To that end, has anyone tried booting OpenBSD/landisk on a
On Mon, Dec 03, 2018 at 08:06:18PM +0300, Denis wrote:
> When X server starts on OpenBSD6.4amd64 I'm getting the message below
>
> ...
> (II) [KMS] Kernel modesetting enabled.
> gbm: failed to open any driver (search paths /usr/X11R6/lib/modules/dri)
> gbm: Last dlopen error: File not found
> fail
On Sat, Jan 05, 2019 at 03:39:34PM +0100, Christer Solskogen wrote:
> On my APU2 I got no network with the latest snap.
>
> I get this in the console:
> starting network
> ifconfig: SIOCSETPFSYNC: Invalid argument
> ifconfig: SIOCSVH: Invalid argument
> ifconfig: SIOCSETPFSYNC: Invalid argument
>
On Mon, Mar 25, 2019 at 07:50:30AM +, Maurice McCarthy wrote:
> On 23/03/2019, Normen Wohner wrote:
> > I have now successfully installed OpenBSD
> > on my Netbook, however Graphics performance
> > is abysmal.
> > I know that sadly Linux uses binary blobs for
> > the GMA500 as it is a licensed
On Sat, Apr 20, 2019 at 12:58:06AM +0300, Mihai Popescu wrote:
> Here is the error message part:
>
> initializing kernel modesetting (Rs880 0x1002:0x9715 0x17AA:0x3082 0x00).
> r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
> [drm] *ERROR* Failed to load firmware!
> drm:pid0: radeondrm_at
On Fri, Apr 26, 2019 at 11:57:14AM -0700, Joe M wrote:
> Hello,
>
> I had this same issue with 6.4 and 6.5. Applying this patch has fixed
> the issue. I am using 2 radeon gpu's.
>
> https://patchwork.freedesktop.org/series/28284/
Thanks for the report and tracking this down. I've committed this
On Sat, Apr 27, 2019 at 04:55:50PM +0300, Gregory Edigarov wrote:
> attached please find dmesg and backtrace of X when that happen again
> hope this bug report will be more useful than previous one.
>
> thank you.
> --
> With best regards,
> Gregory Edigarov
Likely fixed by
xenocara/xserv
On Sun, Apr 28, 2019 at 07:26:54PM -0400, Charles wrote:
> Hello list,
>
> Ever since the new inteldrm driver got merged into -current, shortly
> before the 6.5 release, I'm seeing an odd new behavior on my Thinkpad
> T430 -- when an external display is connected, Xorg blanks all screens
> (but th
On Wed, May 01, 2019 at 12:34:12PM -0300, Daniel Bolgheroni wrote:
> On Mon, Apr 29, 2019 at 07:05:25AM +0000, Jonathan Gray wrote:
> > Does this help?
>
> It was already commited but fixed the problem here.
>
> However, I still can't see the correct modes set for LVD
On Thu, May 09, 2019 at 04:17:40PM +0100, Oriol Demaria wrote:
> I have this laptop and I'm having issues with this laptop. Wireless has to
> be replaced and basically have to wait till the graphics card is properly
> supported, right now is running X with the UEFI framebuffer. So this issues
> are
On Fri, May 10, 2019 at 09:14:00AM -0400, Ted Unangst wrote:
> Jeremy O'Brien wrote:
> > I've snagged the 6.5 xenocara.tar.gz, patched it with just that above fix,
> > and installed it on my system which has made X rock-stable for me. This is
> > totally fine for me personally, but I was curious
sysctl kern.timecounter
> kern.timecounter.tick=1
> kern.timecounter.timestepwarnings=0
> kern.timecounter.hardware=acpihpet0
> kern.timecounter.choice=i8254(0) tsc(2000) acpihpet0(1000) acpitimer0(1000)
> dummy(-100)
>
> Regards,
>
> ---
> Oriol Demaria
> 2FFED6
On Tue, May 28, 2019 at 09:25:52AM -, Stuart Henderson wrote:
> On 2019-05-23, Paco Esteban wrote:
> > Hi misc@,
> >
> > I've been having some system freezes lately, as others using intel
> > graphics.
> >
> > Sometimes it does not hit in days but sometimes the system hangs 2 or 3
> > times a
On Tue, May 28, 2019 at 09:58:58AM -0700, Chris Cappuccio wrote:
> David Anthony [d...@silentsystems.org] wrote:
> > All,
> >
> > The Lenovo release of T*95 series laptops with AMD Ryzen CPU appears
> > imminent.
> >
> > Would these be poor choices for OpenBSD? Are there any anticipated
> > ??
On Fri, Jun 07, 2019 at 03:43:39PM +0200, Paul de Weerd wrote:
> I've just replaced my home gateway with a brandless machine with an
> i5-7200U. While preparing, I noticed the message "ucode too large"
> scrolling by on the serial console, just before the kernel starts.
>
> The dmesg shows cpu0 a
On Sat, Jun 15, 2019 at 09:02:11AM +0100, Richard Laysell wrote:
>
> Hello,
>
> I was trying OpenBSD on a Supermicro A2SDi-4C-HLN4F which uses an Intel
> Atom CPU (Denverton). The board boots but most devices are not
> detected because ACPI can't be enabled.
>
> Does anyone know if this is like
On Tue, Jul 02, 2019 at 05:38:35PM -0700, Misc User wrote:
> On 7/2/2019 2:45 PM, Henry Jensen wrote:
> > Greetings,
> >
> > to keep it short:
> >
> > - older Fujitsu Esprimo PC, Core2Duo, Integrated Intel Graphics
> > - 2 monitors, connected at VGA and DVI
> > - during installation both monitors
On Sun, Jul 07, 2019 at 07:49:58PM +, Ibsen S Ripsbusker wrote:
> I have an ATI Radeon HD8490. It seems to be recognized properly
> in the dmesg. Also, I can view ttys from either of its two plugs.
>
> Unfortunately, it is not recognized as a screen for X. The attached
> Xorg.0.log is from whe
On Thu, Sep 08, 2016 at 09:01:27AM -0700, Bryan Vyhmeister wrote:
> On Wed, Sep 07, 2016 at 06:35:26PM +0200, Simon Mages wrote:
> > can somebody tell me which AMD graphics adapters are supported by the
> > OpenBSD kernel?
> >
> > radeon(4) has a very big list of supported adapters or chip familie
On Thu, Sep 08, 2016 at 09:29:45AM -0700, Bryan Vyhmeister wrote:
> On Fri, Sep 09, 2016 at 02:17:03AM +1000, Jonathan Gray wrote:
> > The LLVM in the tree will not be installed as libraries suitable
> > for Mesa initially.
> >
> > I'm not aware of anyone work
On Wed, Sep 28, 2016 at 10:22:10AM +0200, Stefan Sperling wrote:
> On Wed, Sep 28, 2016 at 06:48:35AM +0200, L.R. D.S. wrote:
> > Hi,
> > I'm thinking of buying a new toy board like BeagleBone Black to test the
> > armv7 port.
> > It's already possible to do full disk encryption on these boards?
>
On Tue, Nov 22, 2016 at 10:29:58AM +0100, Peter N. M. Hansteen wrote:
> a HP Microserver Gen8 landed in my lap recently, but playing with the thing
> last night
> it looks like OpenBSD (latest available snapshot) doesn't play well with the
> RAID controller.
>
> The symptoms are simply disks not
On Sat, Dec 03, 2016 at 11:57:18AM -0600, Peter Miller wrote:
> On Mon, Nov 28, 2016 at 11:23 AM, Stefan Sperling wrote:
> > On Mon, Nov 28, 2016 at 11:09:12AM -0600, Peter Miller wrote:
> >> As for the wifi, I don't see support for the atheros 6174 chipest in
> >> the man pages, and I don't know
On Sun, Dec 04, 2016 at 05:18:47PM -0600, Peter Miller wrote:
> On Sat, Dec 3, 2016 at 8:24 PM, Jonathan Gray wrote:
> > On Sat, Dec 03, 2016 at 11:57:18AM -0600, Peter Miller wrote:
> >> On Mon, Nov 28, 2016 at 11:23 AM, Stefan Sperling wrote:
> >> > On Mon, No
On Tue, Feb 14, 2017 at 11:21:07AM +0100, Peter J. Philipp wrote:
> Hi,
>
> I got telekom's VDSL yesterday and I have an IPTV settopbox. Yesterday
> I was trying to get it to work with igmpproxy but it didn't work. the
> IPTV box spoke igmp v3 which was ignored by igmpproxy and I suspect
> that'
On Wed, Mar 01, 2017 at 07:39:17PM +, Joseph Gidi wrote:
> I know the arm64 port is still in its early days and under heavy development,
> but I'm trying to install the most recent available snapshot and running into
> a problem.
>
> I wrote the miniroot60.fs to an SD card and powered up the
On Sun, Mar 05, 2017 at 08:37:30AM +0100, Otto Moerbeek wrote:
> On Sat, Mar 04, 2017 at 06:40:57PM -0500, Joe Gidi wrote:
>
> > After jsg@ mentioned that booting a Raspberry Pi 3 from a USB device
> > might be
> > possible, I decided to find out how deep the rabbit hole is.
> > As it turns out,
>
On Sun, Mar 05, 2017 at 09:23:13AM +0100, Otto Moerbeek wrote:
> On Sun, Mar 05, 2017 at 07:00:46PM +1100, Jonathan Gray wrote:
>
> > On Sun, Mar 05, 2017 at 08:37:30AM +0100, Otto Moerbeek wrote:
> > > On Sat, Mar 04, 2017 at 06:40:57PM -0500, Joe Gidi wrote:
> > >
s only recognizing 128 MB
> >of
> RAM until I switched to using the DTB and fixup.dat files from Raspbian. Seems
> that those /boot/ files should be kept in sync.
>
> Thanks for all your work on this new platform!
>
> On March 5, 2017 3:36:16 AM EST, Jonathan Gray wrote:
> &g
On Mon, Mar 06, 2017 at 07:46:30AM +0100, Otto Moerbeek wrote:
> On Sun, Mar 05, 2017 at 09:41:27AM -0500, Joe Gidi wrote:
>
> > I was stuck at that point for a while. Make sure you have everything you
> > need
> > to boot on the DOS partition of your USB drive; mine was missing u-boot.bin.
> > A
On Tue, Mar 07, 2017 at 06:58:25AM +0100, Otto Moerbeek wrote:
> On Mon, Mar 06, 2017 at 05:58:36PM +1100, Jonathan Gray wrote:
>
> > On Mon, Mar 06, 2017 at 07:46:30AM +0100, Otto Moerbeek wrote:
> > > On Sun, Mar 05, 2017 at 09:41:27AM -0500, Joe Gidi wrote:
> > >
On Wed, Mar 22, 2017 at 07:20:54PM -0500, mitchell wodach wrote:
> I am having trouble getting my src tree updated. When I try running
> cvs the following output is produced:
> $ cd /usr/src
> $ cvs -q up -Pd
>
> cvs server: WARNING: Read-only repository access mode selected via `cvs -R'.
> Using
On Wed, Apr 05, 2017 at 12:46:27PM +1000, Jason Tubnor wrote:
> Hi,
>
> Just wondering if anyone else is seeing the same issue I am booting a
> 6.1-snapshot in bhyve? In preparation for the 6.1 pending release, I have
> tried to spin up 6.1-snap to iron out any issues in bhyve but I don't get
> v
On Sun, Apr 23, 2017 at 03:39:22AM -0400, Ian Sutton wrote:
> I noticed some strange code in src/sys/arch/armv7/omap/ommmc.c
>
> This preprocessor define seems to map intr. state bit positions with
> strings describing them:
>
> 149 #define MMCHS_STAT_FMT "\20" \
> 150 "\x09d_BADA" \
> 151
On Mon, Apr 24, 2017 at 12:31:52PM +0200, Robert Blacquiere wrote:
>
> Hi,
>
> I have updated one of our machines from 6.0 to 6.1.
> It has 2 dual 10 gb interfaces . One of them a Intel 82598EB based
> dual card will not initialize any more.
>
> The other 10gig works and is based on Intel 82
On Fri, Nov 14, 2014 at 10:04:16AM +0100, Renaud Allard wrote:
> Hello,
>
> On 11/14/2014 09:04 AM, Renaud Allard wrote:
> >Hello,
> >
> >I am trying this on 5.6-stable.
> >Is there a way to list all POLY1305/CHACHA20 based ciphers which are
> >enabled?
> >
> >For example, if I try with RSA:
> >#
I'm curious why you decided to mask the subid here and not just test
subid == 0x308a103c ?
On Sun, Dec 07, 2014 at 03:46:13PM +0100, Alessandro DE LAURENZIS wrote:
> Greetings,
>
> Some days ago I installed OBSD 5.6 on my old Compaq 610 laptop (a pretty
> "standard" CORE2 Duo 2010 machine - yes,
On Tue, Dec 09, 2014 at 07:31:47AM +0100, Alessandro DE LAURENZIS wrote:
> Hi Jonathan,
>
> On Tue 09/12 16:03, Jonathan Gray wrote:
> > I'm curious why you decided to mask the subid here and not just test
> > subid == 0x308a103c ?
>
> In my understanding (I'
On Sat, Dec 13, 2014 at 06:10:36PM -0430, elvis fuentes wrote:
> hi guys moving from openbsd 5.4 to 5.6 with a fresh install I've found Xorg
> refuse to work.
...
> [36.380] (--) intel(0): Integrated Graphics Chipset: Intel(R) i815
> [36.380] (--) intel(0): Linear framebuffer at 0xF00
On Mon, Dec 29, 2014 at 12:45:14PM -0500, Christopher Barry wrote:
> On Mon, 29 Dec 2014 09:29:15 -0800
> Ryan Freeman wrote:
>
> >On Mon, Dec 29, 2014 at 11:17:55AM -0500, Christopher Barry wrote:
> >> Greetings All,
> >>
> >> I've used OpenBSD in the past to build redundant routers and
> >> fi
On Mon, Dec 29, 2014 at 08:57:15PM +, Fred wrote:
>
> I currently have three monitors connected to my laptop but if I try to
> enable X on the third one I'm getting the following error:
>
> port:fred ~> xrandr --output VGA1 --auto
> xrandr: cannot find crtc for output VGA1
...
> vga1 at pci
On Sat, Jan 03, 2015 at 11:16:01AM +, Stuart Henderson wrote:
> On 2015-01-03, Alan Corey wrote:
> > I'm trying to do some antenna work so I want a weak signal from the
> > other side of the basement. So I try stuff like ifconfig athn0
> > txpower 1 and get "ifconfig: SIOCS80211TXPOWER: Inval
On Sun, Jan 11, 2015 at 06:27:22PM +0100, Jan Stary wrote:
> The builtin audio doesn't seem to be fully supported.
>
> azalia0 at pci0 dev 27 function 0 vendor "Intel", unknown product 0x0f04
> rev 0x0c: msi
> azalia0: codecs: Realtek/0x0887, Intel/0x2882, using Realtek/0x0887
> audio0 at a
On Sun, Jan 11, 2015 at 03:23:58PM +0100, Jan Stary wrote:
> (... now that I can boot it.)
>
> The Intel graphics is not recognized.
>
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0f00 rev
> 0x0c
> vga1 at pci0 dev 2 function 0 vendor "Intel",
On Sun, Jan 11, 2015 at 02:27:38PM +0100, Christer Solskogen wrote:
> On Mon, Jan 5, 2015 at 10:31 AM, f5b wrote:
> > according
> > http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/arch/armv7/armv7/armv7.c?rev=1.4
> >
> >
> > Only one board supported in current with two Gigabit ports ,Compulab
>
On Mon, Jan 12, 2015 at 11:11:27PM +0100, Jan Stary wrote:
> On Jan 13 00:03:12, j...@jsg.id.au wrote:
> > On Sun, Jan 11, 2015 at 03:23:58PM +0100, Jan Stary wrote:
> > > (... now that I can boot it.)
> > >
> > > The Intel graphics is not recognized.
> > >
> > > pci0 at mainbus0 bus 0
> > >
gt;
> http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/arch/armv7/imx/imx_machdep.c.diff?r1=1.7&r2=1.8
>
> > Am 12.01.2015 um 18:57 schrieb Christer Solskogen
> > :
> >
> > On Mon, Jan 12, 2015 at 3:30 PM, Jonathan Gray wrote:
> >
> >> The serial console output
On Tue, Jan 13, 2015 at 04:56:22PM +0100, Christer Solskogen wrote:
> On Tue, Jan 13, 2015 at 2:42 AM, Jonathan Gray wrote:
> > Thanks, I've added the missing case for Utilite.
> > A kernel that includes this change can be found here:
> > http://jsg.id.au/openbsd/bsd.IM
On Tue, Jan 13, 2015 at 06:52:00PM +0100, Christer Solskogen wrote:
> On Tue, Jan 13, 2015 at 5:45 PM, Jonathan Gray wrote:
> >
> > Your earlier mail had a different load address than what I'd expect.
> > Try 0x1880
>
> Same. I've tried the f
On Fri, Jan 16, 2015 at 07:59:49AM +0100, Christer Solskogen wrote:
> On Wed, Jan 14, 2015 at 7:19 PM, Christer Solskogen
> wrote:
> > On Wed, Jan 14, 2015 at 3:39 PM, Jonathan Gray wrote:
> >> I've updated the kernel at
> >> http://jsg.id.au/openbsd/bsd.IMX.um
On Tue, Jan 20, 2015 at 10:52:13PM +0100, Jan Stary wrote:
> On Jan 13 12:19:03, j...@jsg.id.au wrote:
> > On Mon, Jan 12, 2015 at 11:11:27PM +0100, Jan Stary wrote:
> > > On Jan 13 00:03:12, j...@jsg.id.au wrote:
> > > > On Sun, Jan 11, 2015 at 03:23:58PM +0100, Jan Stary wrote:
> > > > > (... now
101 - 200 of 638 matches
Mail list logo
