There is something not quite right with acpi on the x41.
It might be related to something along the lines of
interrupt mapping or memory regions not being setup correctly.
While disabling acpi in ukc will let you suspend/resume
it doesn't get us any closer to figuring out what is
going on. Does disabling acpithinkpad help at all?
On Mon, Jul 15, 2013 at 02:03:44AM +0300, haris wrote:
> Hi.
>
> Just updated today with new snapshot and suspend
> seems broken. After closing lid or typing `zzz`, the laptop tries to go
> to sleep, and then resumes with blank screen.
>
> All sets show the same date (July 14th), so I think it's not due to an
> older X build date.
>
> Last upgrade was about 1 and 1/2 month, so it's dofficult to trace where
> the suspend stopped working.
>
> Blindly typing reboot/halt -p does the trick for now.
>
> dmesg:
>
> OpenBSD 5.4-beta (GENERIC) #26: Sat Jul 13 15:15:49 MDT 2013
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 1.50GHz ("GenuineIntel" 686-class) 1.50
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF
> real mem = 2137452544 (2038MB)
> avail mem = 2091094016 (1994MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/19/06, BIOS32 rev. 0 @ 0xfd750,
> SMBIOS rev. 2.33 @ 0xe0010 (59 entries)
> bios0: vendor IBM version "75ET60WW (2.06 )" date 12/19/2006
> bios0: IBM 1867WEF
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG BOOT
> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) EXP0(S4) EXP1(S4) EXP2(S4)
> EXP3(S4) PCI1(S4) DOCK(S4) USB0(S3) USB1(S3) USB3(S3) USB7(S3) AC9M(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (EXP0)
> acpiprt2 at acpi0: bus -1 (EXP1)
> acpiprt3 at acpi0: bus -1 (EXP2)
> acpiprt4 at acpi0: bus -1 (EXP3)
> acpiprt5 at acpi0: bus 4 (PCI1)
> acpiprt6 at acpi0: bus -1 (DOCK)
> acpicpu0 at acpi0: C2, C1, PSS
> acpipwrres0 at acpi0: PUBS
> acpitz0 at acpi0: critical temperature is 97 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "IBM-COMPATIBLE" serial 26534 type LION oem
> "PSPSP"
> acpibat1 at acpi0: BAT1 not present
> acpibat2 at acpi0: BAT2 not present
> acpiac0 at acpi0: AC unit offline
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0xf600! 0xcf800/0x1600 0xd1000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> cpu0: Enhanced SpeedStep 1497 MHz: speeds: 1500, 1400, 1300, 1200, 1100,
> 1000, 900, 800, 600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1024x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 20
> pci1 at ppb0 bus 2
> bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> (0x4101): apic 1 int 16, address 00:16:d3:22:13:5a
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci2 at ppb1 bus 4
> cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: apic 1 int 16
> sdhc0 at pci2 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x13: apic 1 int 17
> sdmmc0 at sdhc0
> ath0 at pci2 dev 2 function 0 "Atheros AR5212" rev 0x01: apic 1 int 21
> ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6, WOR2W, address 00:16:cf:00:ed:c9
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int
> 22, ICH6 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTC426040G9AT00>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 1 int
> 23
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on wd0a (44cbc9ce5d88b0a3.a) swap on wd0b dump on wd0b
>
> [demime 1.01d removed an attachment of type application/pgp-signature]
