Don't forget the basics...
is the floppy ribbon cable connected?
is the floppy ribbon cable known to be good?
are the connectors fully seated, try reseating them?
is the power connected to the drive?
is the drive connected after the cable twist?
is the drive known to be good?
--
NAT box #2 behind box #1. Are there some
routing commands that would allow me to send traffic to
the ISP from box #2 using these new IP's?
Thanks,
--
John Brooks
[EMAIL PROTECTED]
> On Tuesday, September 06, John Brooks wrote:
>
> >
> > (209.145.160.141)
> > OBSD #1 -
> > \
> > Switch DSL Modem ISP(209.145.160.1)
> > /
> > OBSD #2 -
>
> On Tue, 6 Sep 2005 15:25:29 -0500, John Brooks wrote:
>
> >My office network has an adsl connection with a single static
> >ip as follows:
> >
> > 209.145.160.141/24 (gw 209.145.160.1)
> >
> >I requested additional ip's from
$ uname -a
OpenBSD jasper 3.7 GENERIC.RAID#1 i386
$ pkg_info -L p5-Mail-SpamAssassin | grep sa-learn
/usr/local/bin/sa-learn
/usr/local/man/man1/sa-learn.1
I've got two poweredge 2650's w/ PERC 3/di raid cards and I've tried OpenBSD
3.7, 3.6 and 3.5. I've found that the aac in 3.7 is completely unstable, the
aac in 3.6 would have problems after an hour or so of heavy use. BUT, 3.5
seems to be stable but now I'm stuck on a version of an os that is abou
3.6 was hell for me with that damn raid controller. I've got two 2650's and
they were both crashing on 3.6. I'm currently using 3.5 and waiting for 3.8
to come out. From what I've heard from a couple people on the list is that
the 3.8 version is much more stable. The other option is to trade your
h
that for every hacker my
pf.conf would be huge!
There's got to be a better way, and I'm open to suggestions.
John F. Marten III
Information Technology Specialist
On Tue, Sep 27, 2005 at 03:23:41PM +0300, Dimitar Kodjabachev wrote:
> I am trying to install the package pear-DB-1.6.8 on a 3.7 box (i386).
> According to pear.php.net, PEAR DB 1.6.8 requires PHP version 4.2.0 or
> newer, but the OpenBSD package has a @depend
> www/php5/core,-pear:php5-pear-5.0.*:
I totally love the idea but it's not a song. The skit was great but I was
really hoping to blast some music everything I got a error from my raid
array because of this problem. It should be a good punk rock song! How about
God Save the RAID?
God save the RAID her fascist regime
Share the documen
add a 'block in quick on $net inet proto {tcp,udp}
from ###.##.##.### to any flags S/SA'
entry in my pf.conf file. But if I had do that for every hacker my
pf.conf would be huge!
There's got to be a better way, and I'm open to suggestions.
John F. Marten III
Information Technology Specialist
http://dryfish.org.uk/~john/openbsd38/
Hope I'm not spoiling the sticker art for anyone.
adding servers that I send
outgoing emails to, to a whitelist which I like also.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Chad M Stewart
Sent: Monday, October 31, 2005 2:56 PM
To: John N. Brahy
Cc: misc@openbsd.org
Subject: Re: perl script for postfi
OpenBSD is only available via the CD, you have to buy it. That is what
supports the development of OpenBSD. This isn't Linux. And you should
probably purchase a T-Shirt also
http://www.openbsd.org/faq/faq3.html
There are many good reasons to own an OpenBSD CD:
CD sales support ongoing development
co Peereboom <[EMAIL PROTECTED]> [2005-11-01 10:11]:
> > > This is the weirdest thing I have heard all week.
> > >
> > > On Tue, Nov 01, 2005 at 08:36:59AM -0800, John N. Brahy wrote:
> > > > Is there a perl interface to pf?
> > >
> >
You're totally correct and I replied to him and apologized.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Greg Thomas
Sent: Tuesday, November 01, 2005 1:09 PM
To: OpenBSD-Misc
Subject: Re: perl interface to pf?
On 11/1/05, John Brahy <[EMAIL P
> > I;ve got a machien that seems to getting atacked by what appears to be a
> > simplistic "brute force" attck. it's getting hit multiple ties a second
> > with bogus root login attempts, my guess is that they are
> trying dictionary
> > atacks on the password for root.
> >
> > Any sugestions as
,
John
On 12/8/05, Bernd Schoeller <[EMAIL PROTECTED]> wrote:
>
> I had run the current TeamSpeak server in Linux emulation on 3.8 just
> a couple of weeks ago, although I have to admit that this was just for
> testing. But it seemed to work fine.
I managed to get it running in -current but it was unre
nor dots (`.') be part of the name, as
this tends to confuse mailers. No field may contain a colon as this has
been used historically to separate the fields in the user database."
Is that not long enough?
Regards John.
How about
#!/bin/ksh
nc -l localhost 1234 |&
exec 0<&p 1>&p
# Rest of the script here.
This syntax is pretty new to me so I'm not sure of pros and cons.
hi , i would like to set nids and pflogger on diffrernt machine using dup-to
but im not sure where to put this rule i mean in which place in pf.conf file
to not to mess with others rules
ex.
options
scrubs
nat
...
in rules
load balancing
out rules
thanks for reply
regards
dalgorno
On 1/19/06, john gotti <[EMAIL PROTECTED]> wrote:
>
> hi , i meant where to put RULE with dup-to to not to mess with other ,
> espessially with RULE using route-to , i would test it mysel but this fw is
> quite important , so if anyone using it a i would happy for tips , a
,
fastroute or reply-to .
On 1/19/06, john gotti <[EMAIL PROTECTED]> wrote:
>
>
>
> On 1/19/06, john gotti <[EMAIL PROTECTED]> wrote:
> >
> > hi , i meant where to put RULE with dup-to to not to mess with other ,
> > espessially with RULE using route-to , i wo
,
fastroute or reply-to .
On 1/19/06, john gotti <[EMAIL PROTECTED]> wrote:
>
> hi , i meant where to put RULE with dup-to to not to mess with other ,
> espessially with RULE using route-to , i would test it mysel but this fw is
> quite important , so if anyone using it a i would happy
On Fri, Jan 27, 2006 at 06:05:16PM +0100, Toni Mueller wrote:
> - /etc/boot.conf ---
> set timeout 30
> boot /bsd.mpr
> - /etc/boot.conf ---
The "boot" commands instructs it to boot there and then.
after upgrade to 3.9beta/i386, sensorsd can not start
when i start the sensorsd, it show the error message
shell$: /usr/sbin/sensorsd
sensorsd: sysctl: No such file or directory
what file or directory should i need?
shell$: cat /etc/sensorsd.conf
hw.sensors.0:low
On Mon, Feb 13, 2006 at 02:04:23AM -0800, David Benfell wrote:
> [...]
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> [...]
These in the dmesg.
man pccom lists the /dev files as tty00, tty01, cua00, cua01.
uting on OpenBSD?
--
John Brooks
[EMAIL PROTECTED]
> hosts contains (amongst others):
> some.remote.com NNN.NNN.NN.NNN some
>
looks a little funny to me... might work better as
NNN.NNN.NN.NNNsome.remote.com some
or possibly
NNN.NNN.NN.NNNsome some.remote.com
otherwise it seems to disregard the entry in /etc/hosts
.amazon.com/Book-Programming-4th-Edition/dp/sitb-next/0201183994
The version I had only covered K&R-era C, but it seemed to be well-written
and reasonably compact. Certainly not an enormous brick! AFAIK the newer
editions cover modern C
John
really, really wants to understand things will look at
the source code. eg. if I was sufficiently deranged to want to know
the guts of UNIX terminal IO, I might look at tmux
John
the reader finds reading to be optimal at a
particular column width, that said reader may well adjust their
browser window to suit?
John
On Thu, Jul 12, 2012 at 01:22:34PM +0200, Pierre-Emmanuel Andr? wrote:
> The current bulk build is almost finished. New packages will be available
> in the next few days.
Thanks a lot. I fell back to the June 28th snapshot because of some ports
issues. I believe they are probably my fault, but n
It's weird but music playback on my new Fuloong Mini is running too fast.
It's barely noticeable on instruments but with vocals the pitch is too
high. I searched the lists and didn't find anything.
I noticed the problem with mpd. I tried to install mplayer, xine-lib, and
audacious (audacious buil
On Sun, Jul 15, 2012 at 04:40:03PM +, Miod Vallat wrote:
> > It's weird but music playback on my new Fuloong Mini is running too fast.
> > It's barely noticeable on instruments but with vocals the pitch is too
> > high. I searched the lists and didn't find anything.
>
> Sounds like yet anothe
I haven't been able to figure out how to setup an entry in pmon's boot.cfg
to boot OpenBSD in single user mode. I know on other platforms boot -s from
the OpenBSD boot prompt works correctly.
I've tried all sorts of stuff with the args parameter, no joy. Can anyone
clue me in? Thank you.
--
P
Thanks, Otto. I have no complaints. I really appreciate the work everybody
did on this. Just wanted to make sure I wasn't missing something obvious.
I figured it would be nice to have a menu selection for booting single user
from pmon. Up to this point I haven't needed it, it was just a "nice to
h
On Mon, Jul 16, 2012 at 12:10:33PM +0200, Otto Moerbeek wrote:
> On Mon, Jul 16, 2012 at 11:50:28AM +0200, Otto Moerbeek wrote:
>
> > On Mon, Jul 16, 2012 at 09:09:54AM +, John Long wrote:
> >
> I see now that you are using a Fuloong and not a Loongson.
I am usi
On Tue, Jul 17, 2012 at 05:00:06PM +0200, Peter Laufenberg wrote:
> >On Mon, Jul 16, 2012 at 11:00:12AM +, John Long wrote:
> >
> >> On Mon, Jul 16, 2012 at 12:10:33PM +0200, Otto Moerbeek wrote:
> >> > On Mon, Jul 16, 2012 at 11:50:28AM +0200, Otto Moerbeek wr
Thanks for the great work and the informative posts. I'm saving the info for
future reference. Especially the history on the Loongson line is great to
know.
On Wed, Jul 18, 2012 at 09:50:41AM +0200, Wojciech Puchar wrote:
> well my question wasn't about running x86 code under emulation on
> loongson, but running mips compiled programs on it relatively to x86
> compiled programs on x86.
The answer is "it depends".
It takes a long time to build certai
On Wed, Jul 18, 2012 at 09:49:03AM +0200, Wojciech Puchar wrote:
> >>Would be nice if finally some non-x86 hardware would actually be
> >>available.
> >
> >It has been available for ages, and well-supported by free software as
> >well; and I am not only speaking about loongson-based systems.
> >
>
When my system comes up with no logged-on users but with syslogd, pflogd,
ntpd, sshd, sendmail, inetd, and sndiod running, top shows 24M of real
memory consumption. When I start emacs server (emacs --daemon) storage
consumption increases to 59M, more than 2x what is required by OpenBSD
itself and s
On Tue, Jul 17, 2012 at 08:41:33PM +, Miod Vallat wrote:
> 2G: fixed 2F without the branch prediction bug. I am told the recent
> Yeeloong and Fuloong are fit with 2G processors. I am not even sure
> these can be told apart in software, as 2G supposedly reports itself as
> a 2F level.
Does an
Wow! Thanks a lot for the detailed explanation!
On Thu, Jul 26, 2012 at 09:56:44AM -0300, Daniel Bolgheroni wrote:
> On Thu, Jul 26, 2012 at 07:47:46AM +0200, Joakim Dellrud wrote:
> >
> > Perhaps a resource of howtos/FAQ can be created since OpenBSD does not
> > change to much between releases? Or is that not interesting either?
>
> Maybe you
On Thu, Jul 26, 2012 at 04:12:50PM +0200, David Coppa wrote:
> Please,
>
> One sentence, one line...
Ok, here we go:
Index: src/share/man/man8/afterboot.8
===
RCS file: /cvs/src/share/man/man8/afterboot.8,v
retrieving revision 1.13
A list member pointed out I could shorten the diff further by not including
the index.html part of the URL.
Third time's the charm?
Index: src/share/man/man8/afterboot.8
===
RCS file: /cvs/src/share/man/man8/afterboot.8,v
retrieving
On Thu, Jul 26, 2012 at 08:50:09AM -0700, Claus Assmann wrote:
> On Thu, Jul 26, 2012, John Long wrote:
>
> > Third time's the charm?
>
> No. If you take a look at the file, you'll see that each new
> sentence starts at a new line. That's what someone was
On 22 August 2012 04:57, Mikkel Bang wrote:
> Hello!
>
> For authoritative nameservers - which do you guys prefer, NSD or BIND?
NSD requires a restart of the daemon to add or remove zones (this
should be resolved in nsd 4). So if this is something you do a lot
and you need to avoid down time i wo
ess" logic. It's just a trivial regex, amirite? :-/
Gmail supports +foo syntax, but the number of times I've actually successfully
used an address like that is vanishingly small
- is a much better separator IMHO
John
27;t include much (if any? has been a while since I looked at
it) userland source code.
It is still a wonderful, educational book, though.
John
Misc,
I have a OpenBSD 4.7 VPS with 64 proper IPv6 addresses. What I wanted to do
is provide like other services an IPv6 address to clients. I was wondering
what software I would need to learn to do this.
John Tate
--
Website: http://johntate.org
Facebook: http://facebook.com/john.n.tate
John
> 0095
> http://www.stonehenge.com/merlyn/>
> Smalltalk/Perl/Unix consulting, Technical writing, Comedy, etc. etc.
> See http://methodsandmessages.posterous.com/ for Smalltalk discussion
>
--
Website: http://johntate.org
Facebook: http://facebook.com/john.n.tate
John Tate
://johntate.org
Facebook: http://facebook.com/john.n.tate
John Tate
e at all and is totally unrelated
to
> this post.
It is quite pertinent, actually. See the beginning of section 6.6;
http://www.openbsd.org/faq/faq6.html#Tuning
John
mies...
One can certainly be genuinely patriotic whilst in stark disagreement
with the status quo.
John
On 01/09/2011, at 9:23 PM, Daniel Gracia
wrote:
> Lambo, Ferrari, Maserati, Aprilia... As you are an owner, you should know
their historic -let's call it- 'temperamental' behaviour ;-)
I thought Aprilia used Rotax engines in some (all, maybe?) of their bikes
Nein?
John
me the aspect of OpenBSD that
attracted me. It's not enough to have good ideas. Implementation quality
and subsequent maintenance/support matters just as much, if not more.
John
[1] yeah, seems like such a small thing... but it's the first thing I notice
whenever I ride a Japanese bike. Switchgear quality = awful
would it? I should think that they could simply sign the new installer
with the existing keys. OTOH it's quite possible that someone will extract
the private key(s) from the hardware, too. It already happened for Apple's
Airport Express, no?
On balance, I really don't think this is worth the angst and scaremongering.
John
fe for you firstly, but our audit period is limited, if
you object the third party application these domain names and need to protect
the brand in china and Asia by yourself, please let the responsible officer
contact us as soon as possible. Thank you!
Best Regards,
John Gong
General Manager
There is only one way to do a job like this: Write down what it does in
clear English (or your own language), and do the whole thing from scratch.
It will only be tediously slow for the first half of the job.
On Wed, Nov 2, 2011 at 10:29 AM, Gholam Mostafa Faridi <
mostafafar...@gmail.com> wrote:
(nfsd)
# hostname
smass.kab.loc
Perhaps network should be 10 not 10.0.0 ? I doubt it because the server
10.0.0.1 and the client 10.0.0.10, so even a faulty netmask will work.
# mount -t nfs smass:/home /net/smass/home
mount_nfs: can't access /home: Permission denied
# hostname
rothbard.kab
I forgot I have Kerberos, LOL.
Sorry about that.
On Wed, Nov 9, 2011 at 11:19 PM, Rares Aioanei wrote:
>
>
> On Wed, 9 Nov 2011, John Tate wrote:
>
>> Misc,
>>
>> I can't seem to mount NFS exports from my new OpenBSD 5.0 desktop system.
>>
>> # cat
* For some reason anjuta comes with Avahi, which doesn't seem to make
any sense. Why?
John Tate
Yeah I know, it just seems like an odd dependency.
On Thu, Nov 10, 2011 at 6:51 PM, Antoine Jacoutot wrote:
>> * For some reason anjuta comes with Avahi, which doesn't seem to make
>> any sense. Why?
>
> anjuta does not come with avahi per se.
> It's probably a dependency of anjuta that needs it.
This is what I am getting...
in /var/log/daemon
Nov 11 17:35:58 smass nfsd[30663]: can't bind udp addr
On Wed, Nov 9, 2011 at 11:19 PM, Rares Aioanei wrote:
>
>
> On Wed, 9 Nov 2011, John Tate wrote:
>
>> Misc,
>>
>> I can't seem to mount NFS export
Fixed that now getting...
# mount smass:/home /mhome/
Cannot MNT PRC: RPC: Program not registered
On Fri, Nov 11, 2011 at 5:38 PM, John Tate wrote:
> This is what I am getting...
>
> in /var/log/daemon
> Nov 11 17:35:58 smass nfsd[30663]: can't bind udp addr
>
>
> On
# cdio -f cd0c tao /home/john/ubuntu-11.10-desktop-i386.iso
cdio: The media can't be written in TAO mode
What am I doing wrong?
--
www.johntate.org
s running... " \
if jobs 4; then; echo -n "last job running!"; else; echo -n "last job stopped";
env V=1; fi \
sleep 1 \
done
time cat secure1 secure2 secure3 secure4 > secure_t.vnd \
time rm secure1 secure2 secure3 secure4
John Tate.
--
www.johntate.org
Sorry I should have posted. mountd, portmap, and also the appropriate
services are running on the server portmap and nfsd.
less related: mc and ssh with a fast network isn't my idea of fun.
John Tate
On Fri, Nov 11, 2011 at 7:57 PM, Jan Stary wrote:
> On Nov 11 17:40:01, John Ta
Sorry I was a bit drunk, and went mad with abstract criticisms after
being stuck on mathematical style simplification all day and using
timers and all as empirical proof. God help us.
John
>> Nov 11, 2011 at 09:36:01AM +0100, Antoine Jacoutot wrote:
>> On Fri, Nov 11, 2011 at 09:0
Recap...
cdio...
# cdio tao /home/john/ubuntu-11.10-desktop-i386.iso
cdio: The media can't be written in TAO mode
I'm guessing I get that one because ISO distribution has deviated a
long way from formally defined standards towards spontaneously defined
ones.
cdrecord...# cdrecord -v
both systems run Xorg. pf
is not running on either system, I have disabled Kerberos on both
systems until I learn it better.
On Sat, Nov 12, 2011 at 2:16 AM, Christopher Zimmermann
wrote:
> On 11/11/11 14:57, John Tate wrote:
>> Sorry I should have posted. mountd, portmap, and also t
mountd was unhappy with my /etc/exports and wasn't starting. I truly
wish mountd checked the environment to see where I was running it from
and just told me with stdout, but for whatever clever unix reasons
does not.
On Sun, Nov 13, 2011 at 2:30 AM, John Tate wrote:
> # rpcinfo
port, gtk-gnutella, isn't
even worth having if its not maintained.
John Tate.
--
www.johntate.org
This has no 'make install' for some odd reason. I clearly should
become a packager.
On Mon, Nov 14, 2011 at 4:31 PM, Richard Toohey
wrote:
> On 14/11/2011, at 6:13 PM, John Tate wrote:
>
>> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>>
>> cdrecord: This ve
happens I'm not
perfect, but it has little baring on anything.
On Mon, Nov 14, 2011 at 10:49 PM, Rod Whitworth wrote:
> On Mon, 14 22:07:06 +1100, John Tate wrote:
>
>>This has no 'make install' for some odd reason. I clearly should
>>become a packager.
>
> I d
://ftp.berlios.de/pub/cdrecord/ProDVD/
On Tue, Nov 15, 2011 at 2:04 AM, John Tate wrote:
> Make install does nothing in /usr/ports/sysutils/dvd+rw-tools/, and
> the ports is the tarball from
> ftp://ftp.openbsd.org/pub/OpenBSD/5.0/ports.tar.gz - it does not error
> there is simply no out
should just be updated with the DVD support.
On Tue, Nov 15, 2011 at 3:51 AM, Jan Stary wrote:
> First of all, you should have taken this to ports@, not to misc@.
>
> On Nov 14 16:13:34, John Tate wrote:
>> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>>
>> cdrecord: This v
I did, I have actually solved the problem now.
On Sat, Nov 12, 2011 at 11:11 PM, Norman Golisz wrote:
> Hi John,
>
> On Fri Nov 11 2011 16:44, Norman Golisz wrote:
>> On Fri Nov 11 2011 23:07, John Tate wrote:
>> > # cdio -f cd0c tao /home/john/ubuntu-11.10-desktop-i386.
drives and the softraid. It's a little annoying having
to configure gkrellm after every different boot scenario.
Also, where do I get started on learning to make ports? I don't
necessarily mean contribute but where are the docs for a wannabe
contributor?
John
Also this leads nowhere, so
rks?
What is it? Perhaps I should just learn emacs. Though, I really like
anjuta. Are there any IDE recommendations apart anjuta, eclipse, and
vim and emacs editors available?
John
--
www.johntate.org
If vim had a class browser, I'd already be using vim. Geany was
suggested to me off the list.
On Sat, Nov 19, 2011 at 1:49 PM, Richard Toohey
wrote:
> On 19/11/2011, at 2:51 PM, John Tate wrote:
>
>> Misc,
>>
>> I've had troubles with eclipse and anjuta. Eclip
Netbeans crashes with this...
john@rothbard ~$ netbeans
#
# A fatal error has been detected by the Java Runtime Environment:
#
# java.lang.OutOfMemoryError: requested 32784 bytes for Chunk::new.
Out of swap space?
#
# Internal Error (allocation.cpp:272), pid=17843, tid=8647815168
# Error: Chunk
[john@rothbard ~$ ulimit
unlimited
There is something very simple I am missing.
I'm getting really confused here.
On Sat, Nov 19, 2011 at 2:53 PM, Andres Perera wrote:
> you can patch the apps to use setrlimit()
>
> you can write a small sh wrapper that sets ulimits and execs yo
Is this information helpful...
john@rothbard ~$ ulimit -a
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) 524288
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 1354329
max memory size (kbytes, -m) 4059940
open files
Found it in the info page. I'm going to STFU and come back tomorrow if
I'm still this stupid.
On Sat, Nov 19, 2011 at 3:27 PM, John Tate wrote:
> Is this information helpful...
>
> john@rothbard ~$ ulimit -a
> core file size (blocks, -c) unlimited
> data seg s
<3
I already know vim, this is exactly the kind of thing I've needed.
On Sat, Nov 19, 2011 at 2:37 PM, richo wrote:
> Check out the tag explorer plugin..
>
> http://www.vim.org/scripts/script.php?script_id=483
>
> On 19/11/11 14:10 +1100, John Tate wrote:
>>
>&
I am setting up an OpenBSD firewall, and have everything working but I
am using userland pppoe. I am not sure if it ever became an official
part of OpenBSD, but I've heard there might be kernel level pppoe
support.
Is there kernel level pppoe support? Or is the cybersphere filling my
head with dre
er on the
firewall running this configuration. It seems to forward everything
through to the Internet, but blocks DNS which makes it pretty useless.
I've looked at it at least five times...
[john@baal ~$ cat /etc/pf.conf
int_if="xl0"
ext_if="tun0"
rothbard="10.0.0.
I am having troubles using cdio as described in the manual:
http://www.openbsd.org/faq/faq13.html#burnCD
I am using a DVD-RW. With dvd+rw-tools I had no troubles blanking the disk.
[john@rothbard ~$ cdio -f cd0c tao backup.iso
cdio: The media can't be written in TAO mode
The manual page `
Nevermind.
On Mon, Nov 21, 2011 at 8:10 PM, John Tate wrote:
> I am having troubles using cdio as described in the manual:
> http://www.openbsd.org/faq/faq13.html#burnCD
>
> I am using a DVD-RW. With dvd+rw-tools I had no troubles blanking the disk.
>
> [john@rothbard ~
rocess as installing Windows (via
Bootcamp) or is there another way to just dedicated the whole machine
to OpenBSD?
Any advice or links would be greatly appreciated. Thanks in advance.
John
says:
cd /cdrom/4.6 /packages/
I think you've mistakenly added a space after the 4.6. Or am I missing
something?
John
--- Kapetanakis Giannis [Tue, May 04, 2010 at 01:21:04PM +0300]: ---
> Hi,
>
> Is there any planned date for releasing 4.7 in ftp?
from http://www.openbsd.org/47.html :
May 19, 2010
--- Leonardo Carneiro - Veltrac [Tue, May 04, 2010 at 08:54:38AM -0300]: ---
> Hi list.
>
> Why do we get spam on this list? Does it allow to unsubscribed users to
> email us or the spam is comming from subscribers?
> This is ***not*** a flame war start about spam. I'm just curious.
from
http:
On Sat, May 08, 2010 at 10:22:20AM +0300, Pekka Niiranen wrote:
> These all great additions. I just wish Subversion would someday
> be compatible with those.
Subversion is awful. Try git, it supports http without having to
install fancy apache modules.
--- Bob Beck [Wed, May 19, 2010 at 06:48:35AM -0600]: ---
>
> May 19, 2010.
>
> We are pleased to announce the official release of OpenBSD 4.7.
congrats! and more importantly: THANK YOU!
801 - 900 of 1094 matches
Mail list logo
