after upgrade to 3.9beta/i386, sensorsd can not start
when i start the sensorsd, it show the error message
shell$: /usr/sbin/sensorsd
sensorsd: sysctl: No such file or directory
what file or directory should i need?
shell$: cat /etc/sensorsd.conf
--------------------------------
hw.sensors.0:low=4000
hw.sensors.12:high=55C
hw.sensors.13:high=55C
hw.sensors.14:high=80C
--------------------------------
shell$: sysctl hw.sensors
-------------------------------------------------------
hw.sensors.0=it0, Fan1, fanrpm, 4821 RPM
hw.sensors.3=it0, VCORE_A, volts_dc, 1.57 V
hw.sensors.4=it0, VCORE_B, volts_dc, 2.50 V
hw.sensors.5=it0, +3.3V, volts_dc, 3.31 V
hw.sensors.6=it0, +5V, volts_dc, 5.13 V
hw.sensors.7=it0, +12V, volts_dc, 12.10 V
hw.sensors.8=it0, Unused, volts_dc, -1.06 V
hw.sensors.9=it0, -12V, volts_dc, -9.99 V
hw.sensors.10=it0, +5VSB, volts_dc, 2.71 V
hw.sensors.11=it0, VBAT, volts_dc, 0.00 V
hw.sensors.12=it0, Temp1, temp, 33.00 degC / 91.40 degF
hw.sensors.13=it0, Temp2, temp, 33.00 degC / 91.40 degF
hw.sensors.14=it0, Temp3, temp, 58.00 degC / 136.40 degF
OpenBSD 3.9-beta (GENERIC) #0: Sun Jan 29 18:06:40 HKT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) 2200+ ("AuthenticAMD" 686-class, 256KB L2 cache)
1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: TS
real mem = 234401792 (228908K)
avail mem = 206909440 (202060K)
using 2886 buffers containing 11821056 bytes (11544K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(be) BIOS, date 08/04/04, BIOS32 rev. 0 @
0xfa300
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc6c4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc620/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x7e00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01: aperture at
0xd8000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:50:fc:99:64:6c
rlphy0 at rl0 phy 0: RTL internal phy
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPE3102AT>
wd0: 16-sector PIO, LBA, 9772MB, 20014235 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080L0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x56494170 (VIA Technologies <70>)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address
00:0f:ea:1a:02:74
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x00000a, model 0x4063
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wsdisplay0: screen 1 deleted
wsdisplay0: screen 1 added (80x50, vt100 emulation)
-----------------------------------------------------------
