On Mon, Feb 05, 2018 at 11:07:18AM +, Kevin Chadwick wrote:
> On Mon, 5 Feb 2018 11:21:27 +0100
> > However, I can still reproduce device timeouts easily by running
> > tcpbench through an AR9271 in hostap mode. I don't know yet what's
> > causing the problem.
>
> (Not using these for producti
On Mon, 5 Feb 2018 11:21:27 +0100
> However, I can still reproduce device timeouts easily by running
> tcpbench through an AR9271 in hostap mode. I don't know yet what's
> causing the problem.
(Not using these for production btw)
I have unplugged my AR9271 due to these timeouts. Due to the chro
On Sat, Jan 27, 2018 at 12:59:12PM +0300, Denis wrote:
> I would like to add some test conditions to a previous post.
>
> AR9271 USB stick's antenna line of sight to AP antenna ~10m.
>
> It that case I usually receive
>
> athn0: device timeout
You might have better luck with -current from toda
I would like to add some test conditions to a previous post.
AR9271 USB stick's antenna line of sight to AP antenna ~10m.
It that case I usually receive
athn0: device timeout
As man(4) athn diagnostic message shows. 'A frame dispatched to the
hardware for transmission did not complete in time.
Encountered the same errors with AR9271 dongle (athn driver) as in
previous posts:
athn0: firmware command 0x17 timed out
athn0: firmware command 0x18 timed out
athn0 device timeout
Kernel determined it as:
athn0 at uhub1 port 4 configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev
2.00/1.08 ad
On Sun, Oct 15, 2017 at 12:38:56AM -0500, Ax0n wrote:
> Frequently -- several times per hour when I'm actively doing stuff on my
> laptop, the network hangs for perhaps 30-60 seconds. This coincides with
> athn0 timeout messages on the console. I don't have much data to back up my
> claim that it f
On Wed, Jan 25, 2017 at 07:48:18PM +1000, Martin Pieuchot wrote:
> On 25/01/17(Wed) 10:36, Stefan Sperling wrote:
> > On Tue, Jan 24, 2017 at 03:10:34PM -0500, mabi wrote:
> > > Hi Stefan
> > > Thanks for your input. It looks like the g2k16 modifications to the athn
> > > code from awolk@ did not
On 25/01/17(Wed) 10:36, Stefan Sperling wrote:
> On Tue, Jan 24, 2017 at 03:10:34PM -0500, mabi wrote:
> > Hi Stefan
> > Thanks for your input. It looks like the g2k16 modifications to the athn
> > code from awolk@ did not make it into the 6.0 release. So there is still
> > hope for 6.1 ;-)
>
>
On Tue, Jan 24, 2017 at 03:10:34PM -0500, mabi wrote:
> Hi Stefan
> Thanks for your input. It looks like the g2k16 modifications to the athn code
> from awolk@ did not make it into the 6.0 release. So there is still hope for
> 6.1 ;-)
There was a rabbit hole this diff by Adam fell into. I don't
have any PCI or miniPCI
interfaces...
Regards
M.
Original Message
Subject: Re: athn0: device timeout (AR9271 USB 2.0 Wifi-key as hostap)
Local Time: January 23, 2017 11:28 PM
UTC Time: January 23, 2017 10:28 PM
From: s...@stsp.name
To: mabi , misc@openbsd.org
On Mon, Jan 23
On Mon, Jan 23, 2017 at 11:19:31PM +0100, Stefan Sperling wrote:
> On Mon, Jan 23, 2017 at 04:27:32PM -0500, mabi wrote:
> > Hi,
> > I have an Atheros AR9271 Wifi USB 2.0 key on my OpenBSD 6.0 firewall in
> > order to use as an access point. Unfortunately it happens nearly every day
> > that the
On Mon, Jan 23, 2017 at 04:27:32PM -0500, mabi wrote:
> Hi,
> I have an Atheros AR9271 Wifi USB 2.0 key on my OpenBSD 6.0 firewall in order
> to use as an access point. Unfortunately it happens nearly every day that the
> athn0 device times out, kernel log:
>
> athn0: device timeout
>
> and the
/ Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 9. August 2016 10:13
An: Miscellaneous OBSD
Antwort an: ML mail
Betreff: Re: athn0: device timeout with AR9271
Uh oh, now it all makes sense with AP mode is not working propery with my
athn...
Can anyone recommen
Uh oh, now it all makes sense with AP mode is not working propery with my
athn...
Can anyone recommend me a USB wireless adapter which does work as host AP on
OpenBSD?
On Monday, August 8, 2016 9:34 PM, "Kapfhammer, Stefan"
wrote:
http://man.openbsd.org/OpenBSD-current/man4/athn.4
Last line
http://man.openbsd.org/OpenBSD-current/man4/athn.4
Last line "Bugs":
Host AP mode does not work with USB devices.
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Montag, 25. Juli 2016 12:00
An: Miscellaneous OBSD
Antwort an: ML mail
Betreff: athn0: devi
Some news here... I upgraded the BIOS from a version from 2014 to 2016.
Unfortunately that did not change anything to the timeouts. I will now wait
until beginning of September to upgrade to OpenBSD 6.0 and see if that helps.
I will keep you guys posted.
On Tuesday, July 26, 2016 11:25 PM,
On Tue, Jul 26, 2016 at 07:57:46PM +, ML mail wrote:
> Should I upgrade to -CURRENT?
Yes!
Hi ML,
in which machine is the usb dongle plugged in?
Alix/Apu1/Apu2? Other?
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 26. Juli 2016 21:59
An: Adam Wolk; Miscellaneous OBSD
Antwort an: ML mail
Betreff: Re: athn0: device timeout with
, 2016 10:05 PM, "Kapfhammer, Stefan"
wrote:
Hi ML,
in which machine is the usb dongle plugged in?
Alix/Apu1/Apu2? Other?
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 26. Juli 2016 21:59
An: Adam Wolk; Miscellaneous OBSD
Antwort an: M
05 PM, "Kapfhammer, Stefan"
wrote:
Hi ML,
in which machine is the usb dongle plugged in?
Alix/Apu1/Apu2? Other?
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 26. Juli 2016 21:59
An: Adam Wolk; Miscellaneous OBSD
Antwort an: ML mail
Bet
Hi Adam,
I upgraded yesterday from 5.8 to 5.9 and already encountered this morning the
same issue. In the kernel log I get a ton of these messages:
athn0: firmware command 0x17 timed out
athn0: firmware command 0x18 timed out
Now what would be the next step? Should I upgrade to -CURRENT?
or
On Mon, Jul 25, 2016 at 01:31:13PM +0200, Stefan Sperling wrote:
> On Mon, Jul 25, 2016 at 09:57:38AM +, ML mail wrote:
> > Hi,
> >
> > I installed a USB Wifi card on my OpenBSD 5.8 firewall as AP and from time
> > to time there are timeouts which prevents any access to it anymore until I
>
On Mon, Jul 25, 2016 at 09:57:38AM +, ML mail wrote:
> Hi,
>
> I installed a USB Wifi card on my OpenBSD 5.8 firewall as AP and from time to
> time there are timeouts which prevents any access to it anymore until I
> either plug out and in the Wifi dongle again or reboot.
>
Please upgrade
On Sun, Nov 29, 2015 at 02:52:15PM +0100, Adam Wolk wrote:
> Now to be precise. I can use this dongle quite fine. It sometimes goes
> up to 1 hour of usage without any timeouts. When it does timeout it's
> usually in rapid succession (like 2-3 times in next 10 minutes). Each
> time after a timeout
I have the same problem with a new macbookpro12,1 my urtwn adapter work
just fine in a regular ehci(4) machine, but on xhci(4)'s macbookpro I
need to reconnect like 10 times, and even that way, doesn't work. :/
On 28/11, Stefan Sperling wrote:
; On Sat, Nov 28, 2015 at 07:35:00AM -0700, bluesun0
On Sat, 28 Nov 2015 22:30:03 -0800
Bryan Vyhmeister wrote:
> On Sat, Nov 28, 2015 at 09:24:23AM -0700, bluesun08 wrote:
> > ok, now i tested my adapter on
> > a) another machine
> > b) another usb port.
> >
> > Result: The adapter don't work on a) and don't work on b).
> >
> > Is there any oth
On Sat, Nov 28, 2015 at 09:24:23AM -0700, bluesun08 wrote:
> ok, now i tested my adapter on
> a) another machine
> b) another usb port.
>
> Result: The adapter don't work on a) and don't work on b).
>
> Is there any other Wifi-USB-adapter which work reasonably reliable on
> OpenBSD in HostAP mod
ok, now i tested my adapter on
a) another machine
b) another usb port.
Result: The adapter don't work on a) and don't work on b).
Is there any other Wifi-USB-adapter which work reasonably reliable on
OpenBSD in HostAP mode?
regards
Alex
--
View this message in context:
http://openbsd-archi
So now i can test my athn device on
a) a different host controller and
b) on a different machine.
The results: The athn device won't work on a) and won't work on b).
--
View this message in context:
http://openbsd-archive.7691.n7.nabble.com/athn0-device-timeout-tp283934p283969.html
Sent fro
On Sat, Nov 28, 2015 at 07:35:00AM -0700, bluesun08 wrote:
> xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0c: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> uhub2 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 3
> a
sorry, i forgot:
dmesg
OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3965698048 (3781MB)
avail mem = 3841617920 (3663MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at main
ok, i try it on another machine but now i get the error message:
athn0: could not load firmware
Despite:
ls /etc/firmware
-r--r--r-- 1 root bin 70624 Aug 9 01:05 athn-ar7010
-r--r--r-- 1 root bin 70624 Aug 9 01:05 athn-ar7010-11
-r--r--r-- 1 root bin 51280 Aug 9 01:05 ath
On Sat, Nov 28, 2015 at 03:59:08AM -0700, bluesun08 wrote:
> Hi again,
>
> here are more error-messages:
>
> Nov 28 20:34:23 openbsd /bsd: athn0 detached
> Nov 28 20:34:25 openbsd /bsd: athn0 at uhub0
> Nov 28 20:34:25 openbsd /bsd: port 1 configuration 1 interface 0 "ATHEROS
> USB2.0 WLAN" rev
Hi again,
here are more error-messages:
Nov 28 20:34:23 openbsd /bsd: athn0 detached
Nov 28 20:34:25 openbsd /bsd: athn0 at uhub0
Nov 28 20:34:25 openbsd /bsd: port 1 configuration 1 interface 0 "ATHEROS
USB2.0 WLAN" rev 2.00/1.08 addr 2
Nov 28 20:34:26 openbsd /bsd: athn0: AR9271 rev 1 (1T1R),
34 matches
Mail list logo
