On Sat, 28 Nov 2015 22:30:03 -0800
Bryan Vyhmeister <br...@bsdjournal.net> wrote:
> On Sat, Nov 28, 2015 at 09:24:23AM -0700, bluesun08 wrote:
> > ok, now i tested my adapter on
> > a) another machine
> > b) another usb port.
> >
> > Result: The adapter don't work on a) and don't work on b).
> >
> > Is there any other Wifi-USB-adapter which work reasonably reliable
> > on OpenBSD in HostAP mode?
>
> I have what I believe is the exact same device you do (TP-Link
> TL-WN722N) and I just plugged it in to my MacBookAir7,2 where uhub0 is
> attached to usb0 which is attached to xhci0 and, after running
> fw_update to get the athn(4) firmware, was able to reattach and bring
> it up in hostap mode without any issues.
>
> athn0 at uhub0 port 1 configuration 1 interface 0 "ATHEROS USB2.0
> WLAN" rev 2.00/1.08 addr 8
> athn0: AR9271 rev 1 (1T1R), ROM rev 13, address f8:1a:67:1f:cc:89
>
> athn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> lladdr f8:1a:67:1f:cc:89
> priority: 4
> groups: wlan
> media: IEEE802.11 autoselect (autoselect hostap)
> status: active
> ieee80211: nwid "hostap test" chan 1 bssid f8:1a:67:1f:cc:89
>
>
> I think stsp@ is correct that something else is going on with xhci(4)
> on your machine since this USB device works pretty well. I also
> tested an older rum(4) device I have as well and that also works.
>
> Bryan
>
I recently bought the exact same TP-LINK USB wireless (TL-WN722N). It
brings the interface nicely up and the connection works but times out
quite regularly but I am able to reconnect it back with doas
sh /etc/netstart.
Though in my case it's just athn0: device timed out without any
firmware info.
Tested on OpenBSD -current amd64 snapshots from: 31 Oct & 25 November
on a Lenovo G50-70.
Now to be precise. I can use this dongle quite fine. It sometimes goes
up to 1 hour of usage without any timeouts. When it does timeout it's
usually in rapid succession (like 2-3 times in next 10 minutes). Each
time after a timeout I can restart the connection with netstart
*without* unplugging the device.
OpenBSD 5.8-current (GENERIC.MP) #1663: Wed Nov 25 13:59:58 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8464887808 (8072MB)
avail mem = 8204222464 (7824MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT
LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) UAR1(S3) EHC1(S3) XHC_(S3) HDEF(S4) TPD4(S4)
TPD7(S0) TPD8(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4)
PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.87 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000,
1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
(0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: mem address conflict 0xfffe0000/0x20000
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> SCSI3 0/direct
fixed naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
error: [drm:pid0:intel_uncore_check_errors] *ERROR* Unclaimed register before
interrupt
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 2
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo
EasyCamera" rev 2.00/0.06 addr 3
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01
addr 4
uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (ec584bbe45ede0d3.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 5
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z and W dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 5
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z and W dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
athn0 at uhub0 port 2 configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev
2.00/1.08 addr 5
athn0: AR9271 rev 1 (1T1R), ROM rev 13, address 60:e3:27:0e:6d:bb
