Re: Help moving OpenBSD installation to new machine

2018-01-18 Thread Randall Gellens
The vendor suggested that I disable the COM port and use the HDMI connector on the box, saying that there had been reports of a problem with the OpenBSD serial support. That does seem to be the issue. Using HDMI instead of COM allows amd64 6.2 to install and boot. At 4:35 PM -0800 1/18/18,

Re: Help moving OpenBSD installation to new machine

2018-01-18 Thread Randall Gellens
Thank you for your help, Stuart. I've tried booting 6.2 in the amd64, but that won't boot either, it just hangs: Using drive 0, partition 3. Loading.. probing: pc0 com0 mem[6

Re: Help moving OpenBSD installation to new machine

2018-01-18 Thread Stuart Henderson
On 2018/01/17 16:52, Randall Gellens wrote: > At 6:44 PM -0800 1/16/18, Randall Gellens wrote: > > I have a new box, a Protectli with a dual core Intel Celeron 3865U. > > Following the advice to do a clean install onto the new box, I did so, with > OpenBSD 6.2. The install seemed to go smoothly,

Re: Help moving OpenBSD installation to new machine

2018-01-17 Thread Randall Gellens
To clarify, the box is a Protectli Firewall Micro Appliance, 6x Gigabit Intel LAN, AES-NI, Barebones. I've installed a Crucial BX300 120GB SATA 2.5 Inch Internal Solid State Drive and two Crucial 4GB DDR4 2133 MT/s (PC4-17000) SR x8 SODIMM 260-Pin memory sticks into it. During boot, it displa

Re: Help moving OpenBSD installation to new machine

2018-01-17 Thread Todd
Have you tried doing a clean installation, then coping over the configs? If your goal is to update to a supported version, you will eventually have to deal with any incompatible changes. My advise is to deal with any trouble spots now, before migration. On Tue, Jan 16, 2018 at 8:44 PM, Randall Ge

Re: Help moving OpenBSD installation to new machine

2018-01-17 Thread x9p
On Wed, January 17, 2018 12:44 am, Randall Gellens wrote: > I have a pretty old OpenBSD that's been running on a Soekris Net5501, > an AMD Geode LX single chip processor with CS5536 companion chip, > classified as a "586 class processor". > > I have a new box, a Protectli with a dual core Intel Ce

Re: Help moving OpenBSD installation to new machine

2018-01-17 Thread Stuart Henderson
On 2018-01-17, Randall Gellens wrote: > I have a pretty old OpenBSD that's been running on a Soekris Net5501, > an AMD Geode LX single chip processor with CS5536 companion chip, > classified as a "586 class processor". > > I have a new box, a Protectli with a dual core Intel Celeron 3865U. > > I

Help moving OpenBSD installation to new machine

2018-01-16 Thread Randall Gellens
I have a pretty old OpenBSD that's been running on a Soekris Net5501, an AMD Geode LX single chip processor with CS5536 companion chip, classified as a "586 class processor". I have a new box, a Protectli with a dual core Intel Celeron 3865U. I want to first move the existing OpenBSD system to