On 2018/01/17 16:52, Randall Gellens wrote:
At 6:44 PM -0800 1/16/18, Randall Gellens wrote:
> I have a new box, a Protectli with a dual core Intel Celeron 3865U.
Following the advice to do a clean install onto the new box, I
did so, with
OpenBSD 6.2. The install seemed to go smoothly, initializing the disk and
fetching file sets. However, when booting it drops into ddb,
although "show
panic" says the kernel did not panic.
Attached is a zip file containing text captures of the "dmesg" command (as
files dmesg-1.txt through dmesg-9.txt) and the "trace", "ps", and "show
panic" commands (as trace-ps.txt).
I've included a copy of your dmesg and trace inline so others can read
it without unzipping the attachment, etc. (Also CC'd bugs@ because it's
likely to be missed on misc@).
It would be worth trying a -current snapshot on this before spending
more time on debugging. If that does indeed fixes things then you can
just run that and update to 6.3 when it's released. (Also I would
generally suggest running in 64-bit mode by using the amd64 version
rather than the i386 version of OpenBSD. The cpu supports it.)
If that doesn't help but the error is different, send a new trace.
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 610" rev 0x02
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed
to load firmwar
e i915/kbl_dmc_ver1.bin (-22)
uvm_fault(0xd0c703b8, 0xd3bca000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at execlists_update_context+0x10f: pushl 0x34(%eax)
ddb{0}> ddb{0}>
ddb{0}>
ddb{0}> trace
execlists_update_context(d5d12800,d0ed6b94,d08ff4fb,d5d298cc,d5d298c4)
at execl
ists_update_context+0x10f
execlists_context_unqueue(d5d298b4,0,d5d298c4,d5d297e4,d5d18f40)
at execlists_c
ontext_unqueue+0x178
gen8_emit_request(d5bde0fc) at gen8_emit_request+0x224
__i915_add_request(d5bde0fc,0,0) at __i915_add_request+0x9a
i915_gem_init_hw(d5d20800) at i915_gem_init_hw+0x79c
i915_gem_init(d5d20800) at i915_gem_init+0x1d1
i915_driver_load(d5d20800,d0a9b4f0) at i915_driver_load+0xef4
inteldrm_attach(d5d24980,d5d27000,d0ed6d58) at inteldrm_attach+0x331
config_attach(d5d24980,d0c1a950,d0ed6d58,d06f0f80) at config_attach+0x194
config_found_sm(d5d24980,d0ed6d58,d06f0f80,d06f1040,0) at
config_found_sm+0x29
pci_probe_device(d5d24980,80001000,0,0) at pci_probe_device+0x502
pci_enumerate_bus(d5d24980,0,0) at pci_enumerate_bus+0xb9
pciattach(d5bf5100,d5d24980,d0ed6eb8) at pciattach+0xe2
config_attach(d5bf5100,d0c191f0,d0ed6eb8,d06bec90) at config_attach+0x194
config_found_sm(d5bf5100,d0ed6eb8,d06bec90,0) at config_found_sm+0x29
mainbus_attach(0,d5bf5100,0) at mainbus_attach+0x2a6
config_attach(0,d0c190d0,0,0) at config_attach+0x194
config_rootfound(d0b10334,0) at config_rootfound+0xc0
cpu_configure(bd832264,ed4000,ee3000,0,d02004ce) at cpu_configure+0x51
main(0,0,0,0,0) at main+0x4a7
ddb{0}> ps
PID TID PPID UID S FLAGS WAIT COMMAND
* 0 0 -1 0 7 0x10200 swapper
ddb{0}>
OpenBSD 6.2 (GENERIC.MP) #166: Tue Oct 3 19:58:05 MDT 2017
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) CPU 3865U @ 1.80GHz ("GenuineIntel"
686-class) 1.70 G
Hz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES
64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC
,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,
SMEP,ERMS,INVPCID,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
real mem = 2346717184 (2238MB)
avail mem = 2287648768 (2181MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 04/04/16, SMBIOS rev. 3.0 @ 0x8d318000 (86 entries)
bios0: vendor American Megatrends Inc. version "5.12" date 06/08/2017
bios0: Default string YL-SKUL6
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SSDT HPET SSDT
SSDT UEFI SSDT L
PIT WSMT SSDT SSDT SSDT SSDT DBGP DBG2 SPCR DMAR ASF!
acpi0: wakeup devices PS2K(S0) PS2M(S0) PXSX(S0) RP09(S0)
PXSX(S0) RP10(S0) PXS
X(S0) RP11(S0) PXSX(S0) RP12(S0) PXSX(S0) RP13(S0) PXSX(S0)
RP01(S0) PXSX(S0) R
P02(S0) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU 3865U @ 1.80GHz ("GenuineIntel"
686-class) 1.80 G
Hz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES
64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC
,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,
SMEP,ERMS,INVPCID,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus 2 (RP02)
acpiprt11 at acpi0: bus 3 (RP03)
acpiprt12 at acpi0: bus 4 (RP04)
acpiprt10 at acpi0: bus 2 (RP02)
acpiprt11 at acpi0: bus 3 (RP03)
acpiprt12 at acpi0: bus 4 (RP04)
acpiprt13 at acpi0: bus 5 (RP05)
acpiprt14 at acpi0: bus 6 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000
@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000
@1 mwait.1), PSS
acpipwrres0 at acpi0: WRST
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: FN00, resource for FAN0
acpipwrres21 at acpi0: FN01, resource for FAN1
acpipwrres22 at acpi0: FN02, resource for FAN2
acpipwrres23 at acpi0: FN03, resource for FAN3
acpipwrres24 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: FN00, resource for FAN0
acpipwrres21 at acpi0: FN01, resource for FAN1
acpipwrres22 at acpi0: FN02, resource for FAN2
acpipwrres23 at acpi0: FN03, resource for FAN3
acpipwrres24 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
"MSFT0001" at acpi0 not configured
"MSFT0003" at acpi0 not configured
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"INT340E" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
bios0: ROM list: 0xc0000/0x10000
cpu0: Enhanced SpeedStep 1800 MHz: speeds: 1801, 1800, 1700,
1600, 1500, 1400, 1
300, 1200, 1100, 1000, 900, 800, 700, 600, 500, 400 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 610" rev 0x02
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed
to load firmwar
e i915/kbl_dmc_ver1.bin (-22)
uvm_fault(0xd0c703b8, 0xd3bca000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at execlists_update_context+0x10f: pushl 0x34(%eax)
[...]
