Thanks,
Do you know what manufacture / model you have?
On 2014-10-27 09:16, jin&hitman&Barracuda wrote:
Hi Gordon and list
I am using Rt61 for almost two years as a 'ap' mode without any
problem.
On 27 Oct 2014 01:13, "Gordon Turner" wrote:
Hey List,
I am plan
Hey List,
I am planning a new router / firewall / Wifi AP based on the Supermicro
SYS-5015A-EHF-D525
(http://www.newegg.ca/Product/Product.aspx?Item=N82E16816101364) and was
hoping that I could get some feedback on PCIe wifi cards.
After going over the wireless FAQ and then doing some resear
On 2014-07-28 08:43, John wrote:
On Sun, Jul 27, 2014 at 02:07:34PM -0400, Gordon Turner wrote:
On 2014-07-27 10:16, John wrote:
>On Sat, Jul 26, 2014 at 05:34:56PM -0400, Gordon Turner wrote:
>>On 2014-07-23 20:30, Gordon Turner wrote:
>
>Does your gateway at 192.168.2.1 kn
On 2014-07-27 18:04, Stefan Sieg wrote:
On 27.07.2014 13:46, Gordon Turner wrote:
On 2014-07-27 08:06, Stefan Sieg wrote:
>On 26.07.2014 17:34, Gordon Turner wrote:
and you need a route to 10.0.0.0/24 for the hosts in your
192.168.2.0/24 network.
Without that route your hosts in your LAN h
On 2014-07-27 08:06, Stefan Sieg wrote:
On 26.07.2014 17:34, Gordon Turner wrote:
But any attempt to reach the 192.168.2.0/24 network fails.
did you set the route on your clients accordingly, so that they know
how to reach that network?
After connecting the VPN, I tried adding different
On 2014-07-23 20:30, Gordon Turner wrote:
Hey all,
Based on the feedback from Daniel and others, I have successfully
connected to my OpenBSD instance running behind my router / firewall
from an iOS and OSX client on the Internet. (Updated instructions
below.)
The one issue that I have is that
Hey all,
Based on the feedback from Daniel and others, I have successfully
connected to my OpenBSD instance running behind my router / firewall
from an iOS and OSX client on the Internet. (Updated instructions
below.)
The one issue that I have is that requests to the local private network
iptables, based on my previous experience. iOS and OSX VPN clients
work
fine, but not working for Windows. FYI.
Gordon Turner wrote:
On 2014-07-22 05:33, Daniel Polak wrote:
I'll give it a go with what I found but if anyone who has it working
with local authentication can post their ipsec
jul 2014, at 13:05, chenghan tv wrote:
OpenBSD L2TP/IPSec will work behind a Linux NAT port forwarding with
iptables, based on my previous experience. iOS and OSX VPN clients
work
fine, but not working for Windows. FYI.
Gordon Turner wrote:
On 2014-07-22 05:33, Daniel Polak wrote:
I'l
On 2014-07-22 05:33, Daniel Polak wrote:
I'll give it a go with what I found but if anyone who has it working
with local authentication can post their ipsec.conf and npppd.conf, I
would appreciate it!
Here are my notes, granted I am in the middle of getting things sorted
out, so these are not
On 2014-07-21 01:36, chenghan tv wrote:
the public_ip in your ipsec.conf should be the external ip of your
router, not the openbsd box.
Thanks,
After making this change, I no long see errors in /var/log/messages, but
the device times out trying to connect.
I will check other logs to see if
Hey List,
I am trying to use OpenBSD 5.5 as an VPN end point for iOS 7.0 and OSX
10.9 native VPN clients, using L2TP / IPsec.
At the moment I am running the VPN end point on an internal server and
forwarding appropriate ports from the router:
- UDP 500 - Internet Key Exchange (IKE)
- UD
On Sat, 10 Mar 2007 22:39:53 +, Stuart Henderson <[EMAIL PROTECTED]> wrote:
> How about trying to pxe-boot bsd.rd and install on the device itself?
...
> Even if you ultimately want to use custom scripts to do things then it
> would still be worth doing this as a test and if it works, try and w
> And I want to rip out just "a" to write to another disk. First, its
> imperative to have the fdisk setup correctly, though for a flash device,
> creating a whole partition on 3 works well, (fdisk -e sd0, e 3, A6,
> follow prompts).
>
> Once you've got your partition created, remember to dd out
On Tue, 13 Mar 2007 20:11:24 +0200, [EMAIL PROTECTED] wrote:
> On Tue, Mar 13, 2007 at 01:31:53PM -0400, Gordon Turner wrote:
>> I have three questions for the dd savants out there, consider an image
> being dd'd that is created with a dd statement like:
>>
>> dd if=/
On Tue, 13 Mar 2007 14:09:09 -0400, "Nick !" <[EMAIL PROTECTED]> wrote:
>> Then the step that I was asking about was actually dd'ing the
> imageFile.img to the sd0 device.
>>
>> ie, which of these is correct:
>>
>> dd if=imageFileName.img of=/dev/rsd0c
>> or
>> dd if=imageFileName.img of=/dev/rsd0a
On Tue, 13 Mar 2007 13:41:43 -0400, "Nick !" <[EMAIL PROTECTED]> wrote:
> On 3/13/07, Gordon Turner <[EMAIL PROTECTED]> wrote:
>> I have three questions for the dd savants out there, consider an image
> being dd'd that is created with a dd statement like:
>
I have three questions for the dd savants out there, consider an image being
dd'd that is created with a dd statement like:
dd if=/dev/zero of=imageFileName.img bs=512 count=1014049
and then mounted and prepared to be a fully functioning boot drive and
unmounted.
Question 1. Writing this ima
On Sat, 10 Mar 2007 21:53:30 +0100, Paul de Weerd <[EMAIL PROTECTED]> wrote:
> On Sat, Mar 10, 2007 at 02:24:13PM -0500, Gordon Turner wrote:
> | --SNIP from biosboot--
> | ERR RRead error. The BIOS returned an error indication when
> biosboot
> | att
On Sat, 10 Mar 2007 17:31:54 +0100, Paul de Weerd <[EMAIL PROTECTED]> wrote:
> On Sat, Mar 10, 2007 at 11:33:29AM -0500, Gordon Turner wrote:
> | I have a compact flash card that is giving an ERR R on boot. I have
> looked
> at
> | the boot (http://www.openbsd.org/faq/faq14
I have a compact flash card that is giving an ERR R on boot. I have looked at
the boot (http://www.openbsd.org/faq/faq14.html), which told me that my PBR was
most likely messed. Unfortunately I am still at a loss as to how I screwed up.
This is in a Soekris net4501 and the script used to create
21 matches
Mail list logo
